Excel 2010 and labview 2010

Similar Questions

• LabVIEW 2011 and Excel 2010: backup problems

  Hi all! I am a student of mechanical Engineeringfthat very little uses this software. I present you the problem: for a question called biomechanics, my colleagues and I, we have developed a rheometer design, which is controlled by LabVIEW2011. Since we are still at the experimental stage, always has been simulated using labview: the whole experience. Yes, labview, at present, not only the orders of the engine through the fixed frequency, but also simulates the output (in the specific, the answer to the torsion of the cartilage, simulated with a second-order low-pass filter). All this was done by my colleague more experienced than me, and who today put the finish of the project in his perfectly for pc not in mine (we have the same version of labview, but a different version of the office). In practice, the program is very well (there is no 'Run' broken arrow) and the simulation with the creation of the sine graph (response of the cartilage) is done perfectly. Then, my colleague put labview to save data in a spreadsheet at the end of the simulation, asking the user where to put (the excel file must already exist, labview does not it). The excel file must contain a point cloud and two columns (one column represents the frequency, f, of motor control, the second represents the shear modulus G, which increases as the frequency increases and the graph represents the evolution of G based on f). As soon as I decide to save the data, excel opens, for an instant is displayed the diagram of dispersion and data in columns, but immediately after the chart disappears and remains only columns with data (so I have to make the graph "manually") and labview give me the following error:

  Error 2147023170 has occurred to the property node (arg 2) in NI_ReportGenerationToolkit.lvlib:Excel_Insert_Char

  VI-> NI_Excel.lvclass:Excel insert-> easy NI_ReportGenerationToolkit.lvlib:Excel Graph.vi--> SaveExcelFile.vi Graph.vi--> 2.0.vi Progetto

  This error code is not set. Undefined errors can occur for several reasons. For example, no one has provided a description for the code, or you could have wired a number which is not an admission of error code error code.

  In addition, undefined error codes can occur because the error concerns a third object, such as the operating system or ActiveX. For these mistakes of third parties, you may be able to get a description of the error in searching the Web for the (-2147023170) error code or its hexadecimal representation (0x800706BE).

  What can I do?
  Thank you. Concerning

  Different versions of Office is something that I would consider it carefully. Like trying to get the same version FIRST, unless you want to read the documentation for Microsoft Office Excel Developer between different versions of Excel.

• How to sit interface with matlab 2010A and labview 2010

  I use tools of simulation interface 5.0 with matlab 2010A and labview 2010, I want to take my cue from matlab, labview but signal transfer, I am facing a problem. I want to know is there any compatibility issue in sit 5.0 or I do something wrong?
  photos of errors are attached.

  natasftw wrote:

  http://digital.NI.com/public.nsf/allkb/02F5FA55FC28BDE1862578A30071F975
  While it is for 2011, I doubt that they decided to remove 64-bit compatibility as they went forward as 64-bit has become more rather than less demand.  In this document,notes LabVIEW Simulation Interface Toolkit does not support 64 bit versions of MATLAB application software."

  The extent of the compatiblitly for 32 - bit, I'd take a peek at: http://digital.ni.com/public.nsf/allkb/D174674A91E5536286257428005C2426

  The OP's question was SIT support 64 - bit version of LabVIEW and 64-bit version of the MATLAB/Simulink itself, not the operating system software.

  Document in your second link is on a completely different topic to have API for LabVIEW and MATLAB/Simulink/RTW (well, mostly Simulink & RTW). Here is the relevant link for the 32-bit compatibility: http://digital.ni.com/public.nsf/allkb/049295038FF0EE2A86257A06006B2DAD is no SIT 64-bit.

  Other underlying issues is that Pharlap does not have a 64-bit version. Finally, simulations are better performed on some RTOS (embedded PXI) for a deterministic execution rather than PC operating systems.

  -BTC

• The program Excel 2010 keep shutting down and I couldn't get back in.

  Original title: my questions, it's that when someone takes a test for Proveit.com in Excel 2010, Word, Power Point, Access and other computer program?

  My questions, it's that when someone takes a test for Proveit.com in Excel 2010, Word, Power Point, Access and any other computer

  program they really pass?  My problem was when I did the test and then the program Excel 2010 keep shutting down and I couldn't get back in.  Is this normal? Please give me advice so when I take the test again, I know better to have prepared myself for the program.
  Joanne E. Kudlovich
  Winnipeg (Manitoba)
  Canada

  You will need to talk with the people who run Proveit.com.  Only they can tell you if your results were recorded.

• PDFmaker addin in Excel 2010 and 2013 64-bit on the same pc?

  Is it possible to use the PDFmaker add-in in both Excel 2010 and 2013 64-bit on the same pc? I have to use Excel 2010 for 2 more months for some macros. I can create a PDF in Excel 2013 but not 2010. Someone said it is possible, but I didn't think about her.

  Hi kentasmith68,

  Make sure Acrobat is compatible with MS Office 2010 applications, compatible web browsers and Adobe Acrobat PDFMaker, & then try the steps of troubleshooting mentioned herein KB PDFMaker unavailable | Office 2007, 2010, 2013 | Adobe Acrobat 9, Acrobat X, XI, Acrobat Acrobat DC.

  Kind regards
  Nicos

• ThinAPPed Excel 2007 and Excel 2010 - who wins?

  Hello everyone.

  I have a curious question to submit.

  I use ThinApp 5.0 in a test environment.

  I created an application with ThinApp with Excel 2007. Everything is OK, the application and Excel 2007 work perfectly and there is no problem with ThinApp (Excel 2007 is used in this application ONLY and cannot interact with anything).

  The problem arises when I have 'transport' of ThinAPPed enforcement in an environment where Excel 2010 is already installed.

  If I double-click a. Xls file, the file is loaded from Excel 2010 = Correct.

  If I run the application Excel 2007 (ThinApp) and explore and I click two times on a. Xls file, the file is loaded from Excel 2007 =?

  If I run Excel 2007 (ThinAPP), Excel 2010 and Explorer double click on a. Xls file, the file is always loaded from Excel 2007 =?

  The question is: How can I force to open the files. XLS (or other) Excel 2010 always and forever (even if charged) of Excel 2007 in ThinApp?

  Already test:

  Package.ini = file types = deleted .xls and .xlsx for [Microsoft Excel 2007.exe]

  HKEY_LOCAL_MACHINE.txt = deleted all .xls and .xlsx

  ChildProcessEnvironmentDefault = external

  Thank you.

  OK, I found the problem.

  With Office 2007 and Office 2010 introduces a new "feature" that allows you to open documents on the same instance open.

  To fix (it is more accurate to say "escape") I used "Open in a new instance", explained on this link: http://ptihosting.com/blog/it-blog/force-excel-20072010-to-open-in-Separate-window/

  In practice, by pressing the button on the DX. Xls file, it seems "Open in a new instance" and the file is still open in Excel 2010.

  I hope this can help others with the same "problem".

• Excel 2010 question Satellite L300-29 t and F11

  Anyone can help with this problem?

  Using Excel 2010, by pressing f11 is supposed to make a graph on a new sheet, but no graphic is displayed. The shortcut alt f1 works but the picture is on the same sheet as it should. He has been installed from the DVD as well as used on my desktop that works properly. How can I determine if it is the program / computer / keyboard or what is stop this work? Using the Windows 7 update, upgrade of Vista by the provided Toshiba Windows 7 upgrade disk.

  Is there an Excel forum? I looked for updated video drivers, but he said that they are up-to-date.

  TIA

  Hmm. I have not tried excel 2010 yet. Perhaps, you must configure certain parameters in Excel 2010...

• Row limit Excel 2010 report generation

  Hello

  I have Labview Report Generation Toolkit 2010

  My prblem is that I write more than 60000 lines,

  but when I write a Table that begin at the end after 65536 or a mistake

  appears and I can't write the data.

  IM using Office 2010, is there a patch or something to fix this?

  because the limit of rows in excel 2010 is more than 1000000.

  65536 is the special magic number indicating a U16 is used for the line number. However, the excellent simple table VI uses an I32 to the line number. What is the VI you use? There is no "write a table." What version of the Toolbox do you use?

• TDM excel 2010 component snap with limitation of 65536 lines.

  Hello

  I installed TDM excel 2010 component snap and have excel 2010 (32-bit version) on my laptop.

  When I open a file PDM with 300000 lines using excel importer of PDM, it will automatically start the excel. But it will display a dialog box saying that the number of rows exceeds the limitation of the program (65536). It confuses me because excel 2010 is supposed to be able to open the data file more than 1 million rows.

  The add-in works great with any TDMS file within the limit of 65536 lines.

  Any thought or idea, let me know, thanks.

  Marco Yu

  Mechatronics Engineer

  BMT WBM

  Hi Marco,.

  CAR refers to the application of Corrective Action. OR use the bug tracking system.

  For this request, we have already begun to investigate. Thanks for reporting the issue!

  Best regards

  Mavis

• EXCEL 2010 VBA CODE FOR HYPERLINKS?

  This community forum is preferable for questions.  Has asked a question 18/01/14 no response and also showed my three macros.  If please notify and would appreciate help.  These forums are great.  Thanks Dianne

  Hello

  I moved this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/Excel-2010-VBA-code-for-hyperlinks/f9ad455c-a0a6-4ee7-AF4C-b28979c71704

  your Excel forums for you.

• Vista SP 2 or Excel 2010, which blocks

  Installed the Vista SP2. Now have printing problems as well as many crashes with only resort to restart. I also installed Office 2010, the same day and crashes when you use Excel.

  I uninstalled SP2. I put auto BU 1 minute on Excel 2010.   I get "WINDOWS has ENCOUNTERED A PROBLEM" popup in Excel often and randomly. I'm out of Excel. When I go back the program, my file is there. I save the file almost after each data entry. It's very frustrating. I would go back to Office 2007 but do not know if that would solve anything.  I also save all the new files in the old format, I guess.  I put 2010 on this computer because my new laptop wit windows 7 Office 2010 has as well.  Help would be appreciated.

  Hello

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• Student Excel 2010 program

  I have vista 32 HP m833of. I installed Office 2010 and problems with Excel 2010. The toolbar has only a few function on the toolbar? Yes I know it has the'Ribbon' , but most of the functions will not work?

  Help, please

  Thank you

  I have vista 32 HP m833of. I installed Office 2010 and problems with Excel 2010. The toolbar has only a few function on the toolbar? Yes I know it has the'Ribbon' , but most of thefunctions will not work?

  Help, please

  Thank you

  MS Excel questions should go to the MS Office Excel forum.
  Here is the main link. You can decide which section you wish to post to:
  http://social.answers.Microsoft.com/forums/en-us/category/OfficeExcel For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 7 - Excel 2010 - unable to connect to the OLAP Cubes SQL 2000

  Running 32-bit Windows 7 - Excel 2010 - unable to connect to SQL 2000 of the GreatPlains OLAP Cubes - message Getting connection refused actively.

  It works with XP and even load Excel 2010.  I can't find what I need to change in win 7.  I guess that's the firewall or driver settings.  I completely disabled the firewall and still no luck.  I also took the file to connect to the XP machine and tried to use it as an existing connection and still have the error.  I ran Excel on the Win 7 XP SP2, XP SP3 and still no luck.  I have spent hours reading and researching the issue and can not find an answer.
  I tried to change the OLAP service account and open all ports on the server.  Still nothing.  The error message will connect to the client computer and the server does not record demand, so I think that I don't yet get on the server.  I do not understand as well as if the message is actively refusing connection.
  I can run the cubes very well on the server and on the XP SP3 with Excel 2010 machine.
  I'm in my troubleshooting garnis.  There has been some problems, that I have not been able to solve in Microsoft Servers and this is one.  I know that there is an answer.  I'm just not see it.
  Thank you!!

  Hi Litiasheldon,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  SQL Server (TechNet Forums)

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

   

  I hope this helps.

• Excel 2010 spreadsheet won't print in landscape

  When I try to print an Excel 2010 worksheet in landscape, I get only 2 columns and those who are in portrait mode.

  HP Photosmart C4680, Vista 32-bit.

  It is perhaps a problem with the formatting in Excel.  If I were you, I contact Microsoft and make sure that it is not all parameters that might have missed.  There may be a problem with Excel that Microsoft is aware of and has a fix for.  Anyway, they would be the best people to ask about this problem.  Let me know what they say.

• Cannot open Excel 2010 Maximised file in Windows 7

  Cannot open Excel 2010 files in format Maximised, using Windows 7

  After you resize them, make sure that there are no other open programs, including all minimized in the taskbar and then close the Excel window. The size will not forget if it is the last window closed.