DROID: How to turn an alarm... and in a simple way?

Similar Questions

• How to remove the alarms and events database of Citadel?

  Hello

  I use LV 2010 with DSC.

  I made a mistake in my program and I wrote too much data event and alarm at the Citadel. Database *.mdf/*.ldf files are quite large > 1 G. Normally, I connect only two alarms per day. I want to delete all events alarm + data before a certain time of stamps for example. 1.1.2011. How can I do? I tried to use MAX and perform the operation so I wrote small program which reach the data from temporary database and then remove it. Yet I can find old events and alarms... I am able to remove the traces of old but not the events/alarms. How do I remove the alarms and events?

  Thanks, Jim

  Hi Jim,.

  Have you seen this:

  http://forums.NI.com/T5/lookout/how-can-I-delete-alarm-and-event-data-from-a-Citadel5-database/m-p/5...

  Not sure if it is valid with the current version, but worth it.

• I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  How do you know that she can always use Facetime?

  Could she learned/guessed the password restriction?

• How to turn on help and support

  How can I turn on help and support, Windows XP

  You see a message like this:

  Windows cannot open help and Support because a system service is not ongoing enforcement.
  To resolve this problem, start the service named 'help and Support '.

  With the help and support in the past and it he used to work, what do you think might have changes on your system since the last time it worked correctly?

  Have you ever used third-party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, clean, repair, tune up, speed up, compact, compress, faster, power, boost booster, guaranteed.

  Look in the Services applet and check to make sure the help and Support Service is listed, set to automatic startup type and has a status of started (it should start on its own if it is needed and not already running).

  To do this, click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet and find help and assistance.

  Highlight the help and assistance, right-click, choose Properties, and set the startup type to "Automatic", click OK to save the changes.

  Make a right-click Help and support again and choose 'Start' and the Status column must pass to "started."

  If that all works, see if you can get help and Support now.

  If this does not work, describe as much as you can what happened.

• Droid, how I turned off the alarm once he wakes me up?

  I just got my DROID on Saturday. Set the alarm for Mon - Fri, it went away, but I couldn't stop it winding up is to turn off the phone.

  The side button (volume rocker) it stops.  Open the app, go to settings and see what you have the button behavior side value.  (It should be set to sleep or do disappear.  If you have the value None, he does nothing.)

• How to turn power on and off with the mouse 6000

  I accidentally turn on the Magnifier and don't know how to get out...

  Hello

  Click on start - go to the ease of Panel - easy access - from the center of control - make the computer easier to see - now uncheck turn on Magnifier - to finish click on apply.

  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  also read the tutorial above while turning the magnifying power.

• How to turn off alarm full screen completely, not only the timeout?

  I changed 'full-screen - api .warning p:System.NET.HttpWebRequest.Timeout' '0' in ' subject: config. He disabled the message but I have another monitor above my main monitor and when I move my mouse to the video to full screen to the other monitor alarm full screen appears again. It's really disruptive because it stays there forever unless I put my mouse over the video. Could you add a setting to completely disable this alert?

  @Happy112 so the Addon does not work. It does exactly what I've done for Firefox settings.

  @jscher2000 I tried to do everthing you did, but rather than see this short blip that you were talking about, the full alert screen comes up. In addition, I tried to use the code you gave me with the Stylish extension (I had already installed) but it didn't work either (I probably made mistakes even though, as I don't really know how to use it: D)

  BUT I found a solution to my problem:

  I just had to define "full-screen - api .warning .delay" to any integer negative as - 1 instead of 0. That did the trick.

  in any case, thanks to all who tried to help me!

• Ultra droid - how to turn off vibrate on KeyPress?

  Hi all

  I feel a little blind right now, I've been looking without much luck to find where to turn off vibrate on quickly on the key. I disabled vibrate on touch to no results.

  Anyone want to emphasize direct me to where the place is to disable it? Either in photos or used... Settings->-> abc xyz->...

  Pics would be ideal, but I'll take whatever it is it makes me a little around the elbow and I've never used an android phone before today.

  Settings...

  Language and entry...

  What keyboard you use parameters for all...

  There is an option to vibrate on keypress.

  Clear the checkbox to stop the vibration.

• Smartphones blackBerry how to turn off 3G and keeping the smartphone connected to the network.

  How we pearl 9105 deselect option 3G to put off everything using the connectivity with the existing network? Sometimes, because of the power of the battery and connect to a Wifi network for a better internet addition for a couple reasons...

  Manage connections > Mobile network > Data Services = Off.

• my iPhone is in English, I once turned into french and I turned it in English but my Apple music is always in french, I want it in English, and I don't know how he turned back in it.

  my iPhone is in English, I once turned into french and I turned it in English but my Apple music is always in french, I want it in English, and I don't know how he turned back in it.

  Hello louis1322,

  Thank you for reaching out to the communities of Apple. I definitely want to have my Apple music in correct language so I want to know what I'm listening. You want to first try to reboot your device and to force the closure of the music app. If those who do not resolve the problem, you can try a few resets. If you do not already have a backup, please make a backup of all your data in iTunes or iCloud.

  Next, we want to reset all settings.

  Reset all settings: tap Settings > general > reset > reset all settings. This resets all settings including the Wi - Fi networks and passwords, cell settings, VPN and the parameters that you used before APN, Touch ID and a password, any installation of cards in Apple pay and removes the restrictions. This removes all personal data, such as music or photos.

  If the problem is still not resolved, you can try to restore the backup that was made before you, French language change initially.

  Finally, you can erase content and settings on your device and put in place nine. Be aware, this option will be everything, including music and pictures, delete and configure the device as if it was brand new.

  Restart your iPhone, iPad or iPod touch

  How to back up your device using iCloud or iTunes

  Restore your device from an iCloud or iTunes backup

  Erase content and settings on your iPhone, iPad, iPod touch or Apple Watch

  See you soon!

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• Satellite L50-B-17J - how to turn left and made a right click of buttons?

  Hello

  could someone explain how to turn left and do a right click buttons at the bottom of my touchpad? I have Satellite L50-B-17J and just put in place, however I can't use the buttons on the touch pad. I have to click twice on the touch pad and also click and hold to move things. Also can't use right click on the files.

  Many thanks in advance, its really bugging me!

  Matt

  Hello

  Can you please tell us what OS you are using?
  Do you use the preinstalled original Win8.1 64-bit, that you got with your machine?

  I mean the factory settings, everything should work fine, and I guess you don't l t notice this issue from day one.
  At this point I just can you suggest checking the properties of the mouse (touchpad) and make sure that everything is set correctly.

• How to turn off the functions zoom and scroll to the touchpad on the Satellite

  Hello.

  Can someone tell me how to turn off the scroll and zoom for the Synaptics Touchpad v7.2 functions.
  Can't seem to do it via the control panel.

  All of the suggestions.

  Hello

  You can do it in the settings of the touchpad.
  You can find these settings will:

  Control Panel-> mouse-> tab advanced-> button Advanced settings future

  Here you need to uncheck the option called use scroll function

• How can I activate the rear touchscreen Tablet and mouse thing? I have no idea how I turned it off.

  Some how I turn off the touch pad/mouse thing and can't figure how to re-enable it. Please help me!

  Hello dolley:

  Thank you for your request.  I'm happy to help you!

  When the display it is more useful if you provide the model of your computer and what operating system you run.  I understand you accidentally turned off the Touchpad. and now want to allow it. I send you a link to a page for the touchpad. You will need to select your operating system, click here. You should also be able to turn on, follow these steps. Click the Start button, and then type in the mouse. Click on the mouse to open the on it, click on device settings. You should be able to enable and disable the touchpad here.

• Satellite U405D-S2852 - it have Bluetooth and how to turn it on?

  Is - this Satellite U405D-S2852 has Bluetooth and if yes how I turn it on?
  I try to install battery bluetooth 6.0. It is not all devices

  On the Toshiba Web site I can find a Bluetooth driver for your model, so I think it should be equipped with Bluetooth.
  If you are not sure, ask your computer dealer.

  If you use Bluetooth, you must activate the WiFi switch on the laptop and turn it on with FN + F8.
  In addition, try to install the latest driver on the Toshiba site:
  http://www.CSD.Toshiba.com