DROID: Transfer and save on the SD CARD?

Similar Questions

• Back up photos and videos on the SD card by default using XA Ultra

  How can I save photos and videos on the SD card by default using XA Ultra?

  Help, please... Thank you

  Go to the camera, tap the small gear, hit more, scroll down and find the storage of data. If you have a microSD card inserted, you will have the ability to change.

• When youtube ask me if I used to open the video full screen, I press none by mistike and save it the mozilla and now I can't open full screen more, what to do

  When youtube ask me if I used to open the video full screen, I press none by mistike and save it the mozilla and now I can't open full screen more, what to do

  Hello ronbn1, while you are on youtube.com, make a right click on a blank spot on the page, go to view page info > permissions and re - activate the approval of full screen in the list.

• Extract and save all the channels of the PXI-5105 with 4 M of edge detection... Help!

  Dear collegaues!

  Please help me to improve my request, exhibit attached and sorry for my English.

  So my task is to extract and save all the channels (eight) of the PXI-5105 with 4 M of detection of peaks and sample rate 4 M with loop 1 sec...

  Entered all my channels are wiring detectors NaI with 0, 5... 1 microsec pulse (really) width and 0 kHz at not more than 40 kHz freq.

  Why I chose the registration of 4 M and the sampling frequency of 4 M namely? Answer is that I tested previously PXI-5105 40 kHz generator and pulse width 0.5 microsec. It works great and detection of peaks indicate 40000 pulses/s for me. If I set lower than 4M record and sample rate of 4 M, it is without work. In my honest opinion record 4 M and the frequency of sampling of 4 M are parameters very min.

  In the detection of peaks time present only 6 working channels... When I connected to diagram more 6 "detector.vi peak" - I see the error "...". out of memory... ».

  Advise me please, what needs to be done to it, it's all working well.

  
  

• transfer of data to the sd card does not start

  Hi all
  In the storage of settings on my Xperia Z2 section, there is an option "transfer of data to the sd card. It allows to work very well. Once the internal memory was terribly full, is come to a notification that says "75% full, data transfer to sd card" tried as always but this time it does not start. When I try to run within the parameters, also does not start.
  Any suggestions are appreciated.
  Thank you

  Use the file Commander app > cut > paste > on the SD card.

• Connectors HDMI, DVI and DisplayPort on the video card, do I need a special DP to DVI connector?

  HPE H8 1280t HDMI, DVI and DisplayPort on the graphics card.  I want to connect 3 monitors HP,

  1 do I need a DisplayPort to DVI cable do

  2. do I need a special DP to DVI cable, or will be a lot of work.

  3. is there another way to do it?

  Hello

  DP and DVI ports using digital signals, no conversion needed, so you only need something like one of them:

  http://www.shopbot.com.au/DisplayPort-to-DVI-cable/price/Australia/320660

  Kind regards.

• Can not copy the database of res folder and write to the memory card

  I developed a small application using blackberry jde 7.0. I want to copy the database (.db) of res folder and write to the memory card. When I run in the Simulator, it throws exception "FileNotFound". But the file is located in the res folder.

  Help me guys...

  Here is the code

   copyFile("/Demo.db","file:///SDCard/Databases/Demo.db");
  

  //Copy to Memory card
  public void copyFile(String srFile, String dtFile)
  {
  try
  {
  FileConnection fconn;
  fconn = (FileConnection) Connector.open(dtFile,Connector.READ_WRITE);
  //if(!fconn.exists()) // if file does not exists , create a new one
  // {
  // fconn.create();
  // }
  InputStream is = (InputStream)getClass().getResourceAsStream(srFile);
  System.out.println("read" + String.valueOf(is.available()));
  OutputStream os =fconn.openOutputStream();
  byte[] buf = new byte[is.available()];
  int len;
  while ((len = is.read(buf)) > 0)
  {
  os.write(buf, 0, len);
  }
  is.close();
  os.close();
  }
  catch(IOException e)
  {
  System.out.println("Exception"+e.getMessage());
  }
  }
  

  The exception is

  File not found

  «When I run in the Simulator he throws exception "FileNotFound".»

  Which line is the rise of this?

  You might find the code in the sample application SQLiteDemo, which does almost the same thing, useful in the study to determine what went wrong.

• I try to install the windows easy transfer and I get the error.

  I try to install the windows easy transfer and I get the error, "the version of windows you have installed does not match the update you are trying to install.  I download and install the 32 and 64-bit version for XP.  I also downloaded and tried both 32 and 64-bit version for windows 7.

  On which version of Windows 7 you are trying to install Easy Transfer?  Easy transfer seems to be automatically installed on Windows 7. You run Easy Transfer on Windows 7 to 'prepare' the copy, you need to be running on the 'old' PC.

• How can we call save them and save under the action of a plugin?

  Hello

  I want to call the Illustrator save and save under the action of my plugin, is I want to force the user to save and save as operation through my plugin.  After you save the active document using my plugin, I want to get its path, it is possible to do it using the SDK?

  Thanks in advance

  Farida kaid

  You can call Save in a few ways - through the Action Manager (AIActionManager.h) & PlayAction() for one. There is a call from WriteDocument() on these forums who would also do the trick (I think AIDocumentList.h, of AIDocument.h if not there).

  If you want to "force" users to use your plugin, I think you're wandering into dangerous territory. Its probably not a good idea for a plugin to usurp control of Illustrator record capabilities. I mean, you can do little by playing with the call of AIDocumetn::SetDocumentModified() and tricking HAVE thinking that nothing has changed, but I do not know what other side effects that would have. Others have tried, then maybe it works for you. Yet once, search the Forum and you will find details.

  To get the path after a backup, AIDocument.h has a method for this: GetDocumentFileSpecification().

• Photos and video on the SD card

  I just got my e260 and edition special 2 GB micro sd.  I've been playing with all the features and I found a problem.

  The standard question Media Converter is not saving for anything other than the mp3 player.  I tried to save the player, then transfer them manually, but that has not worked.  So, nobody how to record on the map?  Will there be another converter for?

  What version of Firmware you have?
  (See the FAQ e200 series)

  If you have a 'version1' drive, you CAN NOT play videos or pictures to the MicroSD card. (Unless you install and use Rockbox. So you do not use SCM to convert movies...)

• How to transfer my music from the memory card in my blackberry on my computer?

  I lost music on my Blackberry torch saved on the memory card but I am unable to transfer it to my computer, could anybodey please let me know how I can do this?

  Maybe the info will help you get started...

  You have a card reader?

  You have a memory card adapter?

  An example just FYI:

  MICRO SD 2 GB MEMORY CARD
  http://66.116.138.89/eBay/world2power/EMTF2GO2.jpg

  And... the following article might be worth a visit:

  How to unload your cell phone photos
  http://www.PCMag.com/Article2/0, 2817,2348830,00.asp

  You can copy / paste files to and from the memory card.

  If the pictures on your PC have been published... you can always
  copy it to the memory card, but the phone can not
  acknowledge them.

• Backup photos and videos on the SD card by default

  I just bought a new mobile Xperia Z2. I inserted a micro sd Samsung SDXC 64 BG card. After selecting "save the photos to the default SD card" option setting in private closed, I took some pictures and there was a 'Memory error' message and pictures were not saved on SD card. I tried to do this several times but did not work. Please guide me how to solve this problem.

  Thank you

  Reformat the sd card, fat 32. And try again. If it does not work. Try another sd card to verify that it is not just a problem with the sd card.

• Small batch. Review, edit and save to the desktop file.

  I have 50 or more photos of the weekend. I have already created an Album called 'Birthday 2015' and all images imported into this Album.  I want to review them and keep the top 25 or more.  Then cultures, change and save these 25 only to a folder on my computer desk. I want to move this folder over to a SD card or USB key to send to a family member. They want just the photo files, not a slide show or anything like that.  I want to keep the originals of all 50, as well as the finite set of 25.   This will be my first time using Photoshop elements 13 for what that this or another can touch a single image to print at home.   What is the process for this?  It is an 'event', a 'project' I drop the unwanted, those of the Album (how I do that) or simply to 'save' the finished a separate desktop file I'll?  How do I "save under" the picture over to the desktop file? 

  Thank you

  Mike
  

  michaelg7242004 wrote:

  I have 50 or more photos of the weekend. I have already created an Album called 'Birthday 2015' and all images imported into this Album.  I want to revisit and keep the top 25 or more.  Then cultures, change and save these 25 only to a folder on my computer desk. I want to move this folder over to a SD card or USB key to send to a family member. They want just the photo files, not a slide show or anything like that.  I want to keep the originals of all 50, as well as the finite set of 25.   This will be my first time using Photoshop elements 13 for what that this or another can touch a single image to print at home.   What is the process for this?  It is an 'event', a 'project' I drop the unwanted album (how I do that) or just 'save' finishes to a file separate from the Office I'll?  How do I "save under" the picture over to the desktop file?

  Thank you

  Mike

  Mike,

  The two following tips should help you:

  -1- creating a new album of an existing

  An album in your current catalog is a list of files, just like a playlist for audio files. If you want a selection (a subset) of these files, you simply create an empty album. Select the view original album, select the required pictures (easy if you have assigned a given star) by the shortcut Ctrl A, and then drag and drop in the new album of emptiness.

  -2-hourly using 'Export' of the Organizer.

  What you want to do, who prepares the files to a new location or media selected, is called "exporter" in the elements or Lightroom.

  When you're in the Organizer, select the thumbnails (highlighted), you must use the menu file/export or the shortcut Ctrl E. The dialogue then you box will allow to choose not only the target medium or the folder where you want to copy your files. More important still, it allows you to choose the file format and size of the exported files and it can rename them in order to preserve the custom in the album sort order.

  Which is a bit more complex is to work with the original and edited versions if you have version ' sets ' and albums at the same time. If you do not use version sets, no problem. You export originals and files published in two different lots with different subfolders.

  If you use sets of version, which means that the edited versions are attached to the original and you have chosen the version to display at the top of the version set in the navigation area. It is only as the displayed version which is exported. People are generally perplexed when they create sous-albums as described above. Whether you have your album ready for export with the edited versions. You want to export the original separately in a different folder. This would mean that you change the display order of versions to show the original as "top version" for each image. The information about the item "top version" are independent albums: If change you in one album, if the photos are also included in a different album, the 'top' of the version will also change.

  The simple solution if you want to export original and edited separately versions would be to export original first, then do the editing and export the edited versions shown in your albums.

  Once you have the version sets in your albums, you can't easily get to the originals. This would mean using the menu edition/version the value to be converted into individual elements and lose the link between the original and edited version.

  I should mention that the use of the albums is a way to use the Organizer to export your selected objects.

  If you are using categories and keywords, you can select (highlight) your files and export as explained above.

  You can also use the menu file/export to media removable (Ctrl + Shift + O) to copy to flash drive or SD card.

• Unable to save since the sound card of Qosmio F30

  Hello - I have a Qosmio F30 standard with integrated sound card but can't direct recording of the map (use of Audacity).

  I have Vista Home premium, but try when it recording using the microphone and picks it up plenty of background noise.
  Have sorted the line in option to record from a tape, but recording music online streaming is beyond me.

  Can anyone help?

  Hello

  to record online music streaming, you must use a special program ripper that rip´s the part of the flow of output and written on the disk, because it s not possible to record sounds that are IN the system.

  I Don t know if this could help you-> http://all-streaming-media.com/record-audio-stream/

  But check and maybe you can find a solution for you. ;)

  Welcome them

• Satellite L300 will not save to the SD card

  It worked a few days ago... now it's as if the drive does not exist.

  When I bought the laptop the same thing happening with the webcam... they had to reinstall my laptop and I lost everything. I don't want to do it again.

  grrrrrr

  Help

  Have you tested the SD card in another PC?

  Have you tried a different SD card in the L300?

  Have you checked the SD card reader in Device Manager?