DRS works not the way I like it too...

Similar Questions

• Trying to activate 6 Lightroom on a machine to activate it on another.  Not to be activated in the menu help - certainly not the way to do when I connect.  I'm really bored with trying to stick with adobe products...

  Now I have to type it again!

  Trying to activate 6 Lightroom on a machine to activate it on another.  Not to be activated in the menu help - certainly not the way to do when I connect.  I'm really bored with trying to stick with adobe products...

  Oh the adobe, what happened to you?...

  Click Help > "logout".

• VMotion / DRS works if the host is ESXi U2 and not U1

  Hello

  Just to confirm, will be all HA / DRS / VMotion functionality work if the ESXi 4.1 Cluster is updated 1 and one of the hosts is the HOTFIX 2?

  
  Thank you

  Although it is recommended to run the same version/build, it should work properly.

  André

• The screen works not the Satellite Pro a

  My satellite pro, do not know what model because the sticker is worn, but I think its something like L18850
  When I was with her today, he went to sleep, when I rebooted, it just would not come on the screen.
  I tried removing the battery, now the Start button / stop for 45 seconds etc... That did not work.

  I tried to start and stop a lot of times, it starts the desktop computer, I can hear the sound of it connection, but it seems to take more time for the sound to happen now and it seems to the connection ring twice, 10 minutes apart.

  One of the moments where I turned it on it the screen worked and it has loaded the system recovery, I chose to keep my existing files and the partition, the screen worked for the half-hour it took to recover windows, then when it restarted the screen wasn't working again...

  It's very frustrating as a week ago, that the laptop was with Toshiba repair, there is no previous problems with the screen, I sent him with a cooling fan failure...

  Any help would be appreciated, I need laptop badly I work online and need to pay the rent...

  Sorry to hear that very annoying if computer laptop / computer starts to malfunction.
  From my point of view, no one here in the forum would be able to help this issue, because I think that there is something wrong with the hardware.

  You can connect the external monitor just to check if something is not visible on the 2nd screen but of course, this would not correct the problem of the laptop.

  Maybe the problem is related to the last laptop repair? You said that the laptop has been send to the service about a week ago, it's just a guess, but maybe the technician made some mistakes last time who knows that I recommend you to get in touch with the guys again

• If I load fox news in private browsing I see the entire page, but if I load it in normal mode it shows just small images with blue links, and that's all. The page layout is not the way its supposed to be. Im confused...

  I have the pictures to explain it.

  The way it is supposed to look like (now in private browsing) http://img.photobucket.com/albums/v224/emodevil/mozila2.png

  The way it looks when I run Mozilla
  http://img.Photobucket.com/albums/v224/emodevil/mozila1.PNG

  Clear the cache and cookies from sites that cause problems.

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' sites causing problems: Tools > Options > privacy > Cookies: "show the Cookies".

• How do I get this to subtract the way I want it too?

  I ' n trying to edit an old project that I did for my color and design class in 2D where I was trying to figure out how to get the outline of the Octopus, I did to subtract with a white rectangle, I did so that the triangles of color, I got behind the two would show only through the sketch. However, I wasn't always able to understand. Now I have to make a portfolio for my final project, and I was hoping I'd be able to do this time. Most of the time, this has worked but for some reason, this has happened.

  

  I tried to remove just the piece in white before take off, but then in this case.

  

  How to make it so that the white part in the middle looks like the rest of the output line?

  If it helps at all here is it looked like originally.

  

  Choose your black shape and your field of color (with the black shape on the top). Open the transparency palette, click make mask and set the checkboxes to match my screen shot in the post above.

• Firfox is generally not the way it should, nor does youtube, however in IE tube you looks and works only in firefox not tried safe mode without change

  the appearance of firefox help page appear or work as it should, the same way youtube, have tried to erase and reload try firefox safe mode, nothing works. However, in IE8, everything works as it should. I want that my old version of firefox, can someone tell me how I can? whenever I think I found it, start downloading, redirected to firefox 9. How to bring back my old firefox

  You have published with a Firefox 10 version beta version (10 Firefox has not yet been made public, but may be released in the next few days).

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Bindings.Select does not work with the primitive properties like string etc?

  My code works when I use a < String > ObjectProperty, this however does not work when I use a string instead.

  Don't know if this Bindings.select behavior is a bug or expected.

  The NBS are:

  The impression is:

  ObjectProperty < String >--> < String > ObjectProperty: abc

  String-> string: null

  String-> < String > ObjectProperty: null

  I expect all cases to print 'abc' good

  import javafx.beans.binding.Bindings;
  import javafx.beans.property.ObjectProperty;
  import javafx.beans.property.SimpleObjectProperty;
  import javafx.beans.property.SimpleStringProperty;
  import javafx.beans.property.StringProperty;
  
  public class SelectBindingTest {
  
      public static class A {
  
          private StringProperty comment = new SimpleStringProperty(this, "comment");
          private ObjectProperty<String> commentObj = new SimpleObjectProperty<>(this, "commentObj");
  
          String getComment() {
              return comment.get();
          }
  
          StringProperty commentProperty() {
              return comment;
          }
  
          void setComment(String comment) {
              this.comment.set(comment);
          }
  
          public String getCommentObj() {
              return commentObj.get();
          }
  
          public ObjectProperty<String> commentObjProperty() {
              return commentObj;
          }
  
          public void setCommentObj(String commentObj) {
              this.commentObj.set(commentObj);
          }
      }
  
      public static class B {
          private ObjectProperty<A> member = new SimpleObjectProperty<>(this, "member");
  
          A getMember() {
              return member.get();
          }
  
          ObjectProperty<A> memberProperty() {
              return member;
          }
  
          void setMember(A member) {
              this.member.set(member);
          }
      }
  
      public static void main(String[] args) {
          B b = new B();
          A member = new A();
          b.setMember(member);
  
          final String expectedString = "abc";
  
  // this works
          SimpleObjectProperty<String> targetStringObjProperty = new SimpleObjectProperty<>("initialTargetText");
          member.setCommentObj("initialSourceText");
          targetStringObjProperty.bind(Bindings.<String>select(b.memberProperty(), "commentObj"));
          member.setCommentObj(expectedString);
          System.out.println("ObjectProperty<String> -> ObjectProperty<String>: " + targetStringObjProperty.get());
  
  // this doesn't work
          SimpleStringProperty targetStringProperty = new SimpleStringProperty("initialTargetText");
          member.setComment("initialSourceText");
          targetStringProperty.bind(Bindings.selectString(b.memberProperty(), "comment"));
          member.setComment(expectedString);
          System.out.println("StringProperty -> StringProperty: " + targetStringProperty.get());
  
  // this doesn't work either
          targetStringObjProperty = new SimpleObjectProperty<>("initialTargetText");
          member.setComment("initialSourceText");
          targetStringObjProperty.bind(Bindings.<String>select(b.memberProperty(), "comment"));
          member.setComment(expectedString);
          System.out.println("StringProperty -> ObjectProperty<String>: " + targetStringObjProperty.get());
      }
  
  }
  
  
  
  

  EDIT: Sorry for the horrible formatting. Can't seem to understand how to properly insert empty lines.

  Read the fine print in http://docs.oracle.com/javafx/2/api/javafx/beans/binding/Bindings.html#select(javafx.beans.value.ObservableValue, java.lang.String...)

  All classes and properties used in an affair of selection must be public.

  If you do your commentProperty, getProperty (and setProperty, although I suppose it doesn't matter) methods in public class has, it works as expected.

  Post edited by: James_D (link fixed javadoc)

• Windows Vista desktop appearance is not the way it should look like

  I turned on my computer today and after that he started up - everything seemed liked Windows 98! What the devil? But some things like Word are always format Widows Vista - it's like a hybrid of old and new. My computer is a HP 2010 and when I bought it - it had installed Vista. Why is the theme of silver/gray old school Windows 98 on my office when it was never installed in the first place? And how can I change? Or is it a virus? so weird.

  * original title - Windows Vista or Windows 98 or both? What the devil? *

  Boot to the Windows Vista desktop.  Right click on your mouse and select Customize > window color and appearance > open classic appearance for color options properties more.  Select the color scheme Windows Aero drop down list and then click apply.

• HP Officejet Pro 8720: AirPrint works not the iPhone

  I've implemented a new Officejest of 8720 Pro. I have a mac and wireless printing works great! HOWEVER, when I try to use airprint on my ipad or iphone he says that does not find all printers!... I assured I'm on wifi even as the printer, etc... everything seems good...! HOWEVER, when I open the printer utility and go wireless... under the drop down menu to airprint, it shows it's disabled and provides the following message «»

  "You can't use this feature because it has been disabled. For more information, contact the person who set up the printer. »

  I don't know where, in the settings or options there is something that allows me to run this function or OFF... especially when my MAC seems to be the impression very well...

  Please advise!

  Another strange thing... it seems that the firmware update function is off too because I tried to see if I have the firmware Pat and he told me that was turned off as well!

  Please advise!

  Nice day!

  Make sure that Hello and PPI are activated.

  Otherwise, this could be due to Admin disabled AirPrint, check via SAP:

  1 settings

  2. Security

  3 settings administrator

  Please let me know if this solution help you.

• "Paste remembers layers" Yes, but not the way I expected to...

  Here's my problem: lets say I want to copy and paste the three objects, each a sublayer in the same layer and then paste them ALL in front of / before or directly behind / below the object original underlay- is it possible in Illustrator?  Let me give you a more concrete example: say I have a circle, a square and a triangle, in this order (circle on top) in a layer, and I select all and copy them...  Now, I want to paste.  If I press Ctrl + V or + F, Illustrator simply stick them so that the order of the last layer is Circle, square, triangle, circle, square, triangle (and with the newly glued elements, are indicated in italics, still selected).

  What I want to do, however, is to stick to the layer order of the objects will be Circle, circle, square, square, triangle, triangle (or circle, Circle, square, square, triangle, triangle, I'm not picky about which) without changing the position of the object on my work.  I thought that maybe the function "paste remembers layers" would allow me to do, but I tried everything and did not get the result I predicted.  I could do it manually, but when working with 20 or 30 layers...  Ugh.

  Is there some features of Illustrator that will allow me to do this?  Please notify.  Thank you!

  KDS4444 wrote:

  Is there some features of Illustrator that will allow me to do this?  Please notify.  Thank you!

  It is shocking, Illustrator can do...

  -Select your forms

  -go to-> transformation object-> transform each...

  -Press the button copy

• "Folio" DPS dashboard: we're working, not the other!

  Hi all

  I did 2 activities to incorporate in the DPS with edge.

  The fist one working properly! I put the other in another article... I see that the final phase.

  So I tried, with the same structure to change the embedded web content to point to the first.

  So the problem lies in the animation.

  Any idea what this may be?

  I just put a background to fade to the black and then 8 images sliding horizontally with effect of ease back to their final position, it is an animation of 3 seconds!

  Strange thing also is that if I saw the article only (not to the folio) and with the Office Viewer, she worked...

  Thanks for your help

  The value of the retard.125 seconds.

  Bob

• Installed a theme that did not work, now the default theme is bad too!

  I tried "Modern tool for XP icons", but did not notice the part "for XP" until after I installed it, so I took off and I went back to the default value. Unfortunately, now the default theme will show all of the colors; It's just white symbols on the bottom. Even the protected part of the URL bar is a few shades of gray. What can I do to retrieve the value by default as it should?

  You can try to backup the list extensions via Firefox help (Alt + H) > troubleshooting information > copy to the Clipboard.

  In almost all cases, abandoned extensions would already have either a better alternative or fork the best maintained. You can try to search using common words or variants via Firefox Tools (Alt + T) > modules top-right or @ AMOsearch box. For themes, also try Personas for Firefox.

  If you want to try new, experimental features currently missing, please see these alternatives:

  Beta

  Aurora

  Every night

  UX

  The Beta version is the most stable in this order.

• Settings of plugin doesn't only not the way info.plist

  PhoneGap Build compiles a file ipa for me very well, but when trying to send to iTunes Connect via AppLoader I get this error:

  The following URL patterns in your application are not in the right format: [$DROPBOX_APP_KEY].  URL patterns to start with an alphabetic character and be

  compromise of alphanumeric characters, the time, the hyphen or sign only. Please see RFC1738 for more details.

  My config.xml file:

  < name of the plugin = "uk.co.cv - library.plugins.DropboxChooser" >

  < param name = "APP_ID" value = "[app_id]" / >

  < param name = "DROPBOX_APP_KEY" value = "db-[app_key]" / >

  < / plugin >

  Can any ideas on how I fix? TX!

  I noticed that the plugin.xml for the plugin is not declare the DROPBOX_APP_KEY or the APP_ID as preferences. Not positive, but maybe that's it.

  For an example of one that does, see the plugin to push.

• both typekit works in the trial version of Muse too?

  Hi, I'm testing Muse in the Trial Version, before deciding to join the creative cloud (adapter end...)

  Muse seems to be the solution for me to create websites, so I'm happy so far but:

  It seems that the built-in Typekit Webfont recently to Muse does not work when I transfer my test to ftp site.

  I miss something or something wrong or this function work only after that I have to start my subscription of the CC?

  Thanks in advance! Marcel

  This forum post has glimpses of what you are looking for Typekit webfonts not showing as options Muse of Web fonts