DSC RX 100 randomly corrupt files

Similar Questions

• COM Surrogate has stopped working... Resources Windows Protection finds corrupted files

  System information:

  OS: Windows 7 Professional 64 bit installation factory

  Antivirus: Windows Defender Antivirus (automatic update)

  All the updates of windows installed

  Question:

  After trying to display several images in a row using "Windows Photo Viewer", I get the following error message:

  "COM Surrogate has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  Solution attempt:

  Guest ran from the administrator account (start / all the Programs/Accessories/do right click on command prompt / click on "run as administrator / click on 'continue, yes'") and run the command: SFC/Scannow.

  Result:

  Start scanning system. This process will take time.

  Pghase verification of start of system scan.

  Audit 100% competition.

  Resorce Windows protection found corrupt files but was unable to fix some of them.

  details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.  For example C:\Windows\Logs\CBS\CBS.log

  -------------------------

  What should I do now?

  Thank you!

  Hi cedric,

  Thanks for posting the query on Microsoft Community.

  I appreciate your efforts and your time.

  I suggest you to try the clean boot and check if it helps.

  This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in Windows. It starts Windows by using a minimal set of drivers and startup programs.
  How to perform a clean boot in Windows: http://support.microsoft.com/kb/929135

  Note: After troubleshooting, consult this "How to reset the computer to start normally after a boot minimum troubleshooting" section in the link above.

  If the problem persists, try the below mentioned steps that can help you in the matter of fixing:

   
  a. click on start.
  b. right-click on computerand select Properties.
  c. click on Advanced system settings, click the Advanced tab.
  d. in the performance section, click on settings.
  e. Select the "data execution Protection" tab and then click on the option "turn on DEP for all programs and services except those I select".
  f. click on the Add button and look for to C:\Windows\System32\dllhost.exe
  g. click Open, click OK in the warning message.
  (h) click apply and OK.

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Is there a MS, preferably, or an alternative to a ' SFC/scannow: finds corrupted files?

  Is there a MS, preferably, or an alternative to a ' SFC/scannow: finds corrupted files "error when parsing the SFC ends?

  W7, ie11, Intel Pent 4 - 3.00

  Of course, a repair installation is needed, AS in SAY THE MANY SUGGESTIONS below, with it REQUIRING the task long and arduous the resettlement of more than 100 to perhaps more than 200 updates, then put it back some or all of the programs...  IT USUALLY TAKES THE BETTER PART OF 2 DAYS OR MORE.  For some corrupt system files.  There is no reason that the files cannot be simply installed without all this.

  WE HAVE COMPUTERS TO SIMPLIFY AND AUTOMATE THE WORK OF PR PRODUCTS AND LONG.

  THIS MESSAGE'S ADDRESS DIRECTLY TO MICROSOFT: THERE'S A SERIOUS FLAW IN MS - W7: ESTABLISH A FIX.

  IT IS THE KIND OF PROBLEM THAT IS PERVASIVE AND RECURRENT, WHICH SHOULD NOT BE BOUNCING AROUND THE FORUMS AND TECH SUPPORT OFFICES, BUT, RATHER, SHOULD BE IMMEDIATELY HIGH MS-ADVANCED TECHNICAL SUPPORT, SO THAT A COMPLETE SOLUTION, SPECIFIC, SIMPLIFIED AND PERMANENT BENCH.   AS IT IS, I HAVE RE-INSTALLED AT LEAST 3 TIMES IN THE LAST 9 MONTHS, WHAT A WASTE OF TIME, ENERGY AND RIDICULOUS DISTRACTION.

  NOTE TO MICROSOFT TECHNICAL SUPPORT: RE-INSTALL WINDOWS IS NOT A SOLUTION, IT IS A LAST RESORT, SHOULD BE REQUIRED FOR THE FEW AND NOT RECURRING PROBLEMS/ERRORS.

  I WOULD LIKE TO KNOW WHEN A FIX IS READY, THANK YOU IN ADVANCE.

  Hello

  Windows updates must be checked and reinstalled again.

  http://www.SevenForums.com/tutorials/3413-repair-install.html

  THE ELEMENTS THAT WILL BE RESET TO DEFAULT OR AFFECTED:

  • Sounds
  • Services
  • Visual effects settings
  • Devices - drivers Be sure to have these practice to reinstall. They don't always stay after the installation of repair (upgrade).
  • You may lose the opportunity to sign a session in MSN Messenger, to solve this problem have a look at this thread, unable to connect to WLM.
  • You may lose your custom themes because no permisions on the old themes. Go to the folder themes hidden at C:/Users /(User-Name)/AppData/Local/Microsoft/Windows/Themes, then take possession of the themes folder and you have now all your themes back.
  • It has been reported that you can also lose your Media Center gadget after doing the repair facility.
  • Windows updates must be checked and reinstalled again.

  See you soon.

• Indexing not runing after upgrading the hard drive, sfc/scannow reports corrupted files.

  I replace my hard drive using a system repair disc and a system image on 4 DVDs

  Everything works well except the Win 7, that it is not authentic. I intend to deal with this later.

  Then I noticed that indexing does not work

  Went to research, indexing options, advanced, it says indexing does not work

  Select Advanced, rebuild, it simply works and runs,.

  I tried - C:\windows\system32>sfc/scannow, he reported 100 percent complete audit.

  Windows resource protection found corrupt files but was unable to solve some of them

  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.

  I can open the file, but it is 1 MB of data, and I have no idea what this means

  Help

  Fact activation of "in person" who has been a success, but no real messeages returned.

  Called MS - after obtaining a level 2 tech and after much digging, installed Intel Rapid Storage Technology Application SATA/RAID support (I don't have a RAID).

  That fixed all problems!

• sfc/scannow cannot fix corrupted files windows 8. DISM / /restorehealth//cleanup-online image does not work! Any help appreciated.

  Hello

  I can't try to repair the corrupted files on my Sony VAIO laptop to Windows 8. I hope someone can help me solve my problems. I would really like to know how to fix these problems I'm having. It really gets me.  If ever I have similar problems in the future.
  All my drivers are up to date. I'm pretty confident that's not a malware issue. I take care of my line on activities that could infect my computer. Although I'm not 100% that excludes. I use Mcafee security Suite (fully updated and free with my broadband package). No other scanners time real AV are running. I However sometimes use a registry cleaner, after installation and installation of various programs. but I only use the default methods, never the registry COMPLETE cleaning cleaning method. In my view, these could create problems if used files. I also defragment my HARD drive of 1 TB at least once a week.
  DISM / / cleanup-image online /restorehealth/ also is not working error message and log files can be found below!
  I ran sfc/scannow and several times,
  whenever I get the error message stating:
  Windows resource protection found corrupt files but was unsable to correct some
  of them. Details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper.
  For example C:\windows\logs\cbs\cbs.log. Note that iis logging currently not
  supported in offline maintenance scenarios.
  When I reboot win 8 after running sfc/scannow. Windows 8 shows that it is far from my system of up to 100%
  It charges fine. I have run the sfc/scannow, and then he did exactly the same thing. I reboot and it updates my system. but does not not my files corrupted!
  CHKDSK /F also freezes 27%. But when I starts in the my Sony VAIO #1 recovery disk and run diagnostics hardware HARD drive repair tool to try to fix the sectors defective etc on my HARD drive
  which works 100% and says there is NO problem!
  Here are the files of newspapers that I can access. I have to admit, now, that I do not understand them.
  even after much reading online:
  20/07/2013
  sfc/scannow eror message =

  Windows resource protection found corrupt files

  but has been unable to find some

  of them. Details are provided in the CBS.log newspaper

  windir\Logs\CBS\CBS.log for example C:/windows\Logs\CBS\CBS.log.

  Note that logging is not currently supported in offline scenarios.

  (ACCESS DENIED) when I try to open the C:/windows\Logs\CBS\CBS.log log file.

  DISM / online/cleanup-image /restorehealth/

  21/07/2013 of the log files and error messages

  0x800f081f

  the source file is not found

  Use the source option to specify the location

  the files that are needed to restore the function. To learn more

  information on the specification of a location of the source,

  See http://go.microsoft/fwlink/?linkid=243077

  The DISM log file can be found at C:\windows\Logs\DISM\dism.log
  I hope that I can help to solve the problems of thses
  concerning
  How to run the command "SFC/scannow" at startup or in Windows 8
  Information

  This will show you how the sfc/scannow command to start or in Windows 8 in an attempt to trouble altered or modified system files.

  Tip

  If you get the error that Windows resource protection could not start the Repair Service when you try to run the SFC, then make sure that the Windows Modules Installer service is active and set to Manual.

  Services - Start, Stop and disable in Windows 8

  If SFC is unable to repair the system files corrupted because the Bank (source) is damaged, then you could run the Dism/online/Cleanup-Image /RestoreHealth command to set the Windows component store corruption and then then try to re-run the SFC scan.

  OPTION ONE

  To run the SFC/SCANNOW command. at startup

  
  1. open a prompt at startup.

  2 in the command prompt, type diskpart and press ENTER, and then type the size of the list and press ENTER. (see screenshot below)

  
  
  
  3 make Act your boot drive drive letters (ex: 350 MB "System Reserved" partition) and the drive of Windows 8, type Exit , and then press ENTER. (see screenshot above)
  NOTE: If you do not a "system Reserved" partition and are not multi-boot with other operating system, then the boot drive and the drive of Windows 8 may be the same drive letter.

  4 in the command prompt, type the following command and press enter. (see screenshot below)
  NOTE: , You will see a blinking cursor at the prompt to the end. It will take a while to finish running though.

  sfc/scannow damaged = C: \ /offwindir = D:\windows

  Note

  You need to replace the the drive letter of the partition or volume where your Startup system files are stored in the offbootdir = C: part of the order above instead.

  You need to replace the letter of your partition or volume Windows 8 in the offwindir = D: is part of the above command instead.

  
  
  
  5 when the analysis is finished, I hope you will see an everything is ok message as below.
  
  
  
  6 close the command prompt and restart the computer to start Windows 8.
  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file system occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  SECOND OPTION

  To run the SFC/scannow command in Windows 8

  
  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, type sfc/scannow , and then press enter. (see screenshot below)
  NOTE: It may take some time to complete the race.

  
  
  
  3 when the analysis is finished, I hope you will see that all is ok message as the screenshot below.
  NOTE: Fortunately CFS was able to repair my files automatically damaged system.
  
  

  

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  OPTION THREE

  How to see and read that only "CFS" Scan results from CBS. JOURNAL

  NOTE: SFC when is running, it records its actions in the C:\Windows\Logs\CBS\CBS.log. The steps of this option will show you how to view only specific SFC entries with the [SR] tags in the CBS.log newspaper. This can be useful to show you what files SFC couldn't fix automatically if you want to try and manually change them.

  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, copy and paste the following command and press enter.
  NOTE: This will place a file sfcdetails.txt on your desktop with only the SFC scan details of the results of the CBS. Log in this.

  Code:

  findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt
  

  3 close the elevated command prompt.

  4. open the file on your desktop to see the SFC sfcdetails.txt analysis details in convertible bonds. NEWSPAPER.

  5 when you are finished, you can safely remove the sfcdetails.txt file later if you wish.

  Tip

  If you need to replace a corrupted system file that SFC cannot fix, this will show you how to:

  If you have many files are corrupted, then run Dism/online/Cleanup-Image /RestoreHealth to repair any component store corruption, restart the PC after and try the sfc/scannow command.

  If you have only a little, then you could manually extract a new copy directly from your installation of Windows 8 DVD or USB thumb drive, or ISO if file in a virtual machine.

  Check out the Windows 7 Installation DVD files

• Firefox hangs out because of norton toolbar - get corrupted files

  Hello

  Recently, Firefox crashes * much * to exit. Sometimes I quickly leave Firefox when I switch to another application, and then a few seconds after the release, the crash reporter will appear.

  I've read elsewhere that it could be caused by the Norton Toolbar. I have the latest version of Firefox 38.0.5 and the Norton Toolbar 2014.7.12.14, and I think they are compatible, but I don't think.

  In addition, I make violations of integrity on my PC Windows 8.1. SFC is display of corrupted files. I was able to set this number, only to return the next day. I understand that a program ending abruptly can cause these corruptions, so I wonder if Firefox is the cause?

  In a world of perfect Mozilla and Norton would work out their differences. For now I have disabled the Norton toolbar, which is not a solution because I need to stay safe as I Browse. I'd rather not spend in IE or Chrome or the other. This isn't a solution.

  Everyone knows about this problem? Does anyone have a solution for my particular case crashing on the release of Firefox?

  Thank you

  MRINTRBL7
  Michael

  Hello. It has been another week. Still no hangs out. I think that uncheck use hardware acceleration has worked.

  MrIntrbl7
  Michael

• Extraction of the installer of Firefox 4.0. EXE failed - corrupt file - what to do now?

  I downloaded this configuration file, and when I tried to run my window of downloads, the extraction failed because it is a corrupted file. Is there another source of this file as well as the other file in the folder Firefox 4.0 English of the United States?

  You try to run Firefox on Windows 98 (not windows 2000 as your user agent claims)? then 3.6 is the highest, you can run on such ancient operating system

• Full Mac, trying to move the library to SET of photos, but there are corrupted files, cannot locate these files and am stuck!

  Mac Tips Please! I bought an EHR to move my entire photo library like 7yr old MacBook is full to the brim and I need to backup my phone as his shattered and needs sending out of fixing!

  Now, it won't save my picture library on DHM (to remove Mac) as some pic (s?) (among the 35000) are corrupt (but I have no idea of who or how many). I tried to restore the library several times, but then it freezes and says it cannot open the library, it can in fact - but not when restoring it.

  I have now to turn my new SMT in another time machine and saved everything on there. Should I try and remove my library on Mac and then restore from time machine? What this will do to my corrupted files? And it is likely to be able to register then EHD?

  Photo, not iPhoto uses...

  Adevice greatly appreciated!

  What size is the drive?  For Photos, it may be only Mac OS extended (journaled)

  and you can't have photo library on the same amount of time Machine backup

  You can probably clone the library for the EHD with SuperDuper or CarbonCopyCloner or other clone software

  LN

• Unable to downloand and install firefox, corrupted file error

  with or without virus protection, firewall or any security turned on I have download corrupted file. If I leave settings in my regedit I get unauthorized certificate. I had firefox working and silly then me things locked up and stopped so I uninstalled and cant get it back, tried system restore and still bad, checked for viruses and malware and firefox software is what does not work

  I thank you for your help, come and find the problem was with my ISP and my cable modem.

• Download Aurora corrupted file

  I am trying to download the Aurora of Firefox version on my computer and it says corrupted file everytime I try. Please can you fix this

  Thank you

  Hello

  Please try this: https://www.mozilla.org/en-US/firefox/channel/

  I think that generally the file is digitally signed. So, you will need to make sure that the integrity of the file is maintained during the download and after downloading.

• Firefox installs not and showing error 'corrupt file' worm 3.6.3

  When I try to install fiefox 3.6.3 show me Extraction impossible corrupted file

  This has happened

  Each time Firefox opened

  Once downloaded and launched to install

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; Chrome/5.0.307.1 en-US) AppleWebKit/532.9 (KHTML, like Gecko) Safari/532.9

  Here is a direct link to 3.6.3: https://ftp.mozilla.org/pub/mozilla.o.../Firefox%20Setup%203.6.3.exe

  Try to download again the link above, to ensure that you have a clean copy.

• Product recovery does not work on Equim L40 - corrupted files

  I was wondering if someone can help me.

  I've had this laptop for a few months and wanted to do a clean install of the system today and after that on several occasions now she crosses the CD and gets Strawberry where he deals with the new facility and after all away three-quarters through her comes to us in fact say "error: complete failure due to corrupt files.»

  I don't understand how this can be if she tries to re - install the system from the recovery CD.

  Does anyone know how to fix this?

  Hello

  Maybe is the default of restore CD. I think that your neotebook is still under warranty. Go to a Toshiba ASP allow to check the recovery media and if it is fault they replace.

  CU

• Satellite L350: Vista doesn't work anymore - LogonUI.exe - corrupted file

  Security Suite updates on my daughters Toshiba Satellite L350 windows vista the operating system no longer works.
  An error was detected on the system that contains the following message.

  Open a session about UI.exe - corrupted file
  File or directory C/Program ~ 1 / Toshiba/Smart face V is corrupt & unreadable.

  I tried to run a system restore to the last configuration on both computers, but always the same problem exists. I also tried to restore the two laptops to the factory settings, but the system still does not work. I don't have a restore disk as disk Toshiba HARD drive recovery is on the laptop.

  Can someone help me or suggest any way I can fix it both of these laptops. It seems very strange that both of these computers have stopped working at the same time according to windows automatic updates in October 09.

  Thank you Gary

  Hello

  AFAIK the LogonUI.exe is responsible for connecting to the Windows operating system.
  If the exe file is corrupt then you won't be able to connect to the operating system.

  You don t the recovery disk but you have the HARD drive on the second partition recovery this may be your last resort.

  Switch on and press F8. Choose fix my computer.
  Then new window appears offering the option called: HARD drive recovery.

  Choose this option and see if you can start the HDD recovery procedure.

• driver hp laserjet p1006 Downloads Download but corrupt file message when trying to launch installation

  The 64-bit window 7-bit driver downloads download successfully.  Double click on download to start the installation results pilot in the corrupted file error message.  What is the problem?  the file security settings, other?

  Or no download from another browser, or the download link have failed.  The latter generated the message file is corrupt. Extraction failed.  Former computer warns the file is not not a common download and could cause problems (a security message to ignore maybe, but I had such drawn on computer problems this week I can't afford to take the chance) I'll leave this question for now and will be instead of tomorrow's computer service.  Thanks for your help.

• How to find corrupted files and remove them on mac i

  How to find corrupted files and remove them on i mac?  AM currently using OS x EL capitan 10.11.12 Mac said to run slowly and the recent upload did not work until the 3rd attempt.

  Thank you

  You do not have.

  You can run this program and post the results so that we can see what you have installed that could cause your problems.

  http://www.etresoft.com/etrecheck