DSC-S500 will not work in win7

Similar Questions

• An old game that I play in Win XP (Spear Of Destiny) will not work in Win7

  I like to play old games that work in Windows XP, but do not work in Win Vista or Win7. I get the messge of error "this system does not support mode full screen. The games are all games Wolfenstein and Spear Of Destiny. Any help appreciated. That's all that keeps me from switch to Win7. I have two computers running Win7 and will not work in both, so it is not unique to a single computer.

  This system of all games Wolfenstein and Spear Of Destiny may be played on win7? If this isn't excellence of sysem, then launch the game mode of compatibility , and you're done.

• I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  Thank you more:
  Steve Vidacs /Hungary

  On Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  You must have installed a Windows 7 64-bit driver (if it exists)
  for this. Do you have? Otherwise, navigate to the web site of the camera
  manufacturer, search, download and install it.

  Ken Blake, Microsoft MVP

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• LaserJet 1018 will not work on windows 7

  I have a HP Laserjet 1018 which works fine on Windows Vista 64 - bit.  I just built a new PC and put Windows 7 Home Premium 64 - bit on it.  The drivers on the HP support site will not work.  When I try to print something, it is sent to the printer and disappears.  I interrupt printing that document actually get sent to the printer and it appears.  As soon as I have some Nations United-pause the printer, the document disappears, but nothing prints.  Normally, when something is sent to the printer, the "information" LED yellow lights up momentarily and prints the document.  The led does not at all.  I tried new cables, uninstalling and reinstalling etc.  Nothing works.  Just to be sure this isn't a printing problem general, I connected a Laserjet 1020 on the new machine and it works fine.  However, it is my printer to work and I can't leave it on the new computer, which is a personal computer for my home.  It worked to identify that my copy of Windows 7 allows you to print, but is not a long-term solution.  Help?

  Hello

  Thanks for the post.  On this one, I have some ideas.  I pasted the links below.  One is for the driver Win7/64 page and the print diagnostic utility.  I would certainly recommend the utility to narrow down the issue.  The other is a related document in queue which contains excellent information.  Good luck!

  http://support.HP.com/us-en/document/c02239404

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=1814094#n190

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Rocket will not appear on Win7, Fuze + screen goes black

  Sansa Fuze + with Firmware 2.38.06A on Win7

  I use an Amazon Kindle cable to connect my Sansa Fuze + Win7. Because I forgot the cable supplied with the rocket. They are two data cables so that both should work. When I turn on my Fuze +, it turns on normally, but I have no music on it (this is new to me, a refurb). When I hook the cable to the Fuze +, the screen goes black and the Fuze + does not appear in the list of drives to Win7. When I pick up the cable, the rocket + will return to the normal screen, which shows the Music (a frame with the word 'Music') menu option.

  Why it does not work on Win7?

  The day before I connected to Windows XP and he showed as a player just fine.

  NOTE: I have not installed the Sansa update on the Win7 machine yet. Is this a problem?

  MSC makes connections easier, because it appears in this fashion, as any other unit of memory "dumb" storage such as a USB key, etc. MTP mode is necessary for 'protected' or files DRM crippled like those of the Rhapsody music service or audio books (as these "borrowed" from your library system). I would never advise setting Auto Vice.

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Moving project between first CS5 and CS5.5 will not work... Help!

  If all goes well installed CS5.5 sparer dir and tried to import the CS5 project. Well he opened very fast but then he had trouble scouring the project. It seems that CS5.5 dislike some mov files. Maybe som codec problems? The windows monitor will be freezes or the display of 'media pending' forever. On some files mov, *.avi and SB it will allow scrubbing... but very slow. Rendering will not work either when it comes to some problem files, it will stop making and ending with the creation of crash. I tried to create a new empty project to 5.5 and just imported these "problem files", but then it works very well with the washing and rendering. There is no open problem the project in CS5.03, everything works perfectly there. So what I did? Yes, I backed up my c: drive and formatted, it... 28 hours later I installed everything nice and fresh with only the CS5.5 version on my drive. That worked better? N° !!! the same problem. After another 15 hours of trial and error, I got my "blessed of God" has registered C:disk. As far as I understand that this problem seems to be a problem with 5.5 and not my setup of the computer with codecs etc.? If there is someone out there who can help me?

  Thank you

  Inteli7 975extreme @4. 2 GHz

  Adaptec 5805 in raid 5

  1x300GB Velociraptor for Win7 ultimate

  4x300GB Velociraptor for scratch in raid 5 disk

  ZOTAC GTX480

  UAD-pci card

  Corsair TX 750W power supply

  22 '' dual monitors

  It seems that CS5.5 dislike some mov files.

  It is indeed true.  Adobe is aware of the problem and working on a fix.

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.

• My entertainment sainburys application will not work in AirPlay on iOS 9.3

  Entertainment sainburys app will not work in AirPlay I can watch a movie on my iPad, but can't listen to my TV through the air Apple TV device, I can see my iPad on screen and YouTube plays just this app is not working I am using iOS 9.3

  Some applications do not broadcast their content you are sure that your application won't, a lot of apps that provide movies or TV series you block using AirPlay.

• How can I recover my old firefox after I replaced it, it told me a new will not work?

  I was on my AOL Homepage and was encouraged to be upgraded for increased security. Everything went well, but when I tried to open Firefox, I learned it wouldn't work. Usually, with this older system, I am notified when an upgrade will not work. I would have never taken the lead and replaced my old if I knew. Is it possible to recover my old Firefox?

  There are apps that I have on this old system that does not work on newer systems. (I have an Airbook updated but I like the big screen for some things). I found this on Google:
  https://support.Mozilla.org/questions/970943
  Mozilla
  September 11, 2013 - where can I find older versions of Firefox, which runs on OSX 10.5? ... because Firefox 16 is the latest version of Firefox that works with Mac...
  and downloaded Firefox 16 of their link. It seems to work. For security reasons, I use my Airbook for bill payment, etc.
  Thanks for your comments. Thank you very much for the quick responses.

• I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... its

  I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... says not compatible... it is activated in Add ons... nothing has been put to day or changedf suddenly just no toolbar and it will not tie

  RoboForm will probably have an update for Firefox 30 when Firefox 30 is actually out, if not sooner. No need to turn off the automatic updates now.

• IPad will not sync with iTunes on my laptop. Synchronization in iPpod settings will not work

  MY iPad will not sync with iTunes on my laptop, the sync on my iPad button will not work. I have the latest updates on both.

  I guess you mean that the sync button in iTunes, not on the iPad, will not work. If you are sure you have the latest version of iTunes and iOS (your profile shows 8.1) try quitting iTunes on the computer, restart the computer and force restart your iPad

  No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?