DSN pointing to not support ODBC driver

Similar Questions

• I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation

  I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation. She did not support on windows 7. isn't there a mechanism to make as the support of windows 8?

  Original title: not to support the pilot

  Hello

  Don't forget to check with the help of the manufacturer of the device as their may be a newer version, if necessary
  still in beta.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows does not support external drives

  I have several external hard drives. I have so much that I can't keep up with the software for each drive. someone at - there a solution to this situation?

  Hello
   
  1. what happens when you connect the external hard drive to your computer?
   
  2 did you change on your computer before this problem?
   
  3. readers recognize in disk management and Device Manager?
   
  4. other devices work properly with the Ports of Universal Serial Bus controllers?
  5. what operating system is running on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
   
  Run the fix it and then check.
  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  You can also check whether external drives are working fine with another computer.

   
  Previous post your answer for you help in this matter.
   

• 5.1 ACS is not supported ODBC and Oracle

  Hi Netpro

  Train my familiar and careless with the old version of the ACS, ACS unit I bought two 5.1 device to work in the HA function. After installation and did ' t tried configured for use with the external database with ORACLE, I see nothing. I tried to read the paper and I saw no keyword that said this support the ODBC or Oracle version. If anyone can help me what is the workaround for ACS work with ODBC and Oracle.

  Thank you

  Pitcher

  This pitcher,

  4.2 the CSA can be installed on the CSACS-1120-K9 unit simply re-Imaging it (so not really a downgrade) with a dedicated DVD.

  You can get such a DVD through an official TAC case:

  http://Tools.Cisco.com/ServiceRequestTool/create/launch.do

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Installed, but not available ODBC driver

  Hello

  I installed 32 bit ODBC Instant Client (instantclient-odbc-nt - 11.2.0.4.0) on a 64-bit Windows 7 system. Installation succeeds without errors,

  , but the driver is not available as a source of data ODBC (odbcad32). Path to the Instant Client is defined in the Environment Variable.

  
  

  Best regards

  
  

  Torsten

  Hi Torsten

  instantclient-odbc-nt - 11.2.0.4.0 is the 32-bit driver, it will be available in c:\WINDOWS\SysWOW64\odbcad32.exe

  Note: Names are back to 32-bit odbc, you look to SysWOW64 and for 64 bit find you in System32. It's such as designed by Microsoft.

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/ms712362%28V=vs.85%29.aspx

  Thank you

  Indana

• tktds6xx not supported by Windows 7 drivers

  I've just updated from Windows XP to Windows 7. It turns out that transmissions does not support a driver tktds6xx for Windows 7. Does that mean I can write is no longer a software that supports these scopes? I noticed that they take over a tktds7xx driver. Could I cheat and use that one?

  What are you talking about? The pilot of tktds6xx here has nothing to with Tektronix support or any version of windows.

• HP Pavilion 500-267C: hardware acceleration is disabled or not supported by your video card driver.

  I had to reinstall Windows, then reinstall the drivers.  Fortunately, I had saved drivers in the system with the magic of the pilot, it was simple to just restore. However, when I try to start a Windows game, I get this error message:

  Hardware acceleration is disabled or not supported by your video card driver, which could slow down the performance of the game. Make sure that you install the latest video card driver and that hardware acceleration is turned on.

  I checked, and hardware acceleration is enabled, which leaves wondering what the problem is. In Device Manager, by looking at the audio, video and game controllers, I see only an audio driver. I came to HP site, looking for the right video driver, but I don't know what to download.  My computer does not have a separate graphics card (more pity). It is integrated into the motherboard.

  Can someone point me in the right direction?

  Hello:

  According to the specifications of product for your PC, it comes with integrated Intel HD graphics card.

  Here are the graphics drivers you need from the support page of your PC.  Install and reboot the PC.

  This package provides the driver for the Intel HD Graphics solutions in the supported models that are running a supported operating system.

  File name: sp65024.exe

• upgrade to vcenter 5.5 to 6.0 error: the database driver not supported

  When I try to upgrade vCenter of 5.5 to 6.0 I get error:

  Error: database driver not supported

  c:\Windows\system32\sqlncli.dll

  Solution: Make sure you use vCenter Server with supported driver

  vCenter used SAerver of SQL 2005 Express. I tried the upgrade SQL Server 2008R2 Express, but the error is the same

  What ODBC drivers?

  Those who are actually supported?

• no disc in the drive? And file is not supported or the required codec is not installed?

  I have been w work on a project for over 6 month. yesterday, it would not open. First he asked me to point to the location of the video files for 18 files I fortunately work for the last 6 months, and then once I went that it gives me the message:

  ' There is none in the hard disk drive. Insert a disk in the drive\Device\Harddisk2\DR2'

  .. .and constantly stopped upward when I tried to ignore or Cancel to exit (forcing me to go to the Task Manager to close items).

  I should point out that I have worked off the coast of files stored on an external hard drive of 1 terrabyte. However, I am still able to view and open all the ext HD files in Windows Media Player, etc. which eliminates me the idea of a problem with the drive.

  I can open a new project and add the same file/s (first few files for a test run). Following its telling me

  "This type of file is not supported or the required codec is not installed."

  .. .but it worked just the other day, so it IS supported and must have the required codec.

  Moved some files on the hard disk of the PC. Seems to work ok... take back me to the fact that the external hard drive can be a source of the problem, but I can open all the files there in all other programs... so you have PE? Or is it?

  I can't find any similar link on the forum... but if anyone can help or have any suggestions I'd appreciate your comments! See you soon

  Gila Valley,

  Welcome to the forum.

  Can provide you details of your system, your project and your source files?

  It may be best to start a new thread to do this, so that zero confused between your questions and the OP also, since this thread has been marked as answer, many people eventually spend on watching and miss your problems. The more eyes on a problem, the better.

  I would like to look at this ARTICLE for suggestions on the types of information that would be so useful.

  Then, if you collect this info, take a look at this ARTICLE to settle pre, your operating system and also the computer.

  Good luck and thanks for this info,

  Hunt

• Portege P3480CT does not support the CD and floppy drive

  Can someone help me with the following:
  If I start my Portege I get the message: lack of OS...
  I have tried everything to make him work, but it does not support my CD rom drive and a floppy drive.
  Does anyone has a suggestion how to get my protected work yet?

  Thank you very much

  Anton

  Hello
  as far I know the Portege has it a USB floppy and a map of PC CD-Rom.

  Have you checked the Bios of your laptop, especially here the boot priority settings?

  The Bootdisc for Windows 95, Windows NT and Windows 2000, do I have in my archives. I have that helps you, give me that send you an email so that I send you the Bootdiscs.

  Good bye

• Material of A100-529 - update driver ATI - satellite not supported

  Hello

  I have Toshiba Satellite A100-529. It has ATI Radeon Xpress 200 M graphics (integrated on board). Driver Toshiba being old (02.2005) I would like to update. I went to the ATI site, downloaded driver for my pilot x200M (last 7.1) and...
  WHEN install he said I have hardware that is not supported by this driver...? ! ? ! ? !
  I've tried everything. First uninstall the old driver - nothing. According to an older version of the driver ati 6.7, 6.8, 6.12 - nothing. the same error. Then I tried the driver for the ati card normal - nothing, next ati mobility driver - the same - hardware not supported?

  I'm depressed. A week ago, and I can't update my ati card driver. I even tried the so-called MODTOOL - for some other laptops. NOTHING!

  Help, please!

  It is important for me!

  Hello

  Try the driver for Satellite A110 (PSAB6). It is also not the most recent one, but better then your old.

  Good bye

• Why the GeForce Go 7600 is not supported by any driver Nvidia?

  Why this video card is not supported by any driver on the web of the nvidia drivers?

  Just reply: as said in the previous post, the Nvidia card installed on laptops is not the same as the graphics card on the desktop for example.
  Toshiba provide drivers updated the own

  PS: to my knowledge omegadrivers.net drivers can be installed and work properly

• Its satellite A210-131 driver does not support DirectSound entry

  From Premiere Pro CS3, an error message is displayed:

  -"Der zurzeit installierte Soundkartentreiber unterstuetzt keine DirectSound-Eingaenge"Es ist keine Audioaufnahme possible".
  -"The its installed card driver does not support the entry of DirectSound. The sound recording is not possible.

  Please help me find a working driver. Operating system is Windows Visat Ulimate.

  Thank you
  Siegwin

  Hello

  To my knowledge the DirectSound is an addition to the system of Microsoft DirectX. It should be included in DirectX.
  Please check if you have installed the latest version of DirectX 9 C.

  In addition, I would recommend updating the audio driver. On the Toshiba page, you can find the latest two versions of Realtek sound dirver;
  -6.0.1.5374
  -6.0.1.5406

  If the two will not support the DirectSound input try another on the homepage of Realtek.
  The chip is called Realtek ALC268

• Driver IDT HD said that my hardware is not supported?

  Hello

  I have a HP ENVY dv7 - 7398ca I recently put Windows 7 on. Everything works perfectly except that my speakers are really quiet now. I tried to download and install the driver IDT HD for Windows 7 and during the installation, I got a message saying that my hardware is not supported.  Any ideas?

  Nikko

  Hello:

  See if this driver works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107964-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5273735 & sw_lang =

• Tecra M3 Geforce 6200 driver - says hardware is not supported

  Hello

  I tried to update the Geforce 6200 with Forceware 91,47 of the site of Nvidia driver, but he said that the material was not supported. What are the latest Nvidia drivers, that I can use for the chipset? I want to use the OpenGL 2.0 features, but the driver on the Toshiba site does support OpenGL 1.5 (I think). I have a Tecra M3.

  Also if I added more RAM, it would allow me to increase the amount of RAM used by the card?

  Hello

  As far as I know, this camera has no shared memory and RAM cannot be used to go to the top performance of the graphics card.

  Problem of driver updates, is that on most units, it is not possible to do a simple reason because of physical protection. If the graphics card with the new driver, is forced to higher limit, the result can be damage or overheating with suddenly switch off.

  Your device is quite old and, in my opinion, you shouldn't force them to work at the limit.

  Good bye