Dudas Técnicas between vmware sphere4 o otro virtualizador

Similar Questions

• What is the difference between vmware.log vmware - 1.log, vmware - 2.log... Why are there different logs created

  Experts of HI, need some advice what is the difference between vmware.log vmware - 1.log, vmware - 2.log... Why are there different logs created. I understand the vmware.log is to check when the VM not suite or something, but not sure the rest feed files. Thank you

  Log files are rotated once a virtual computer is turned on or when the file reaches a certain size. The vmware.log (without number) is the current log file. By default, the old files are kept for purposes of troubleshooting. You can - even if I do not - recommend disable this behavior, or even configure the virtual machine to do not create the log files at all.

  André

  PS: I forgot to attach the KB article: http://kb.vmware.com/kb/8182749

• different between "VMware vSphere: install, configure, manage [V4]" and "VMware vSphere: Fast Track [V4]" "

  can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "

  Thank you

  can someone give me some information about the rules of absente, homework and laboratories, in these classes online.

  You must participate in daily.

  You need a good Internet connection and a fixed phone or a headeset.

  Online courses are generally in central time... but in some cases may be different.

  also should I take a test on these classes?

  NO.

  just be present on these days of class?

  Yes

  I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?

  The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.

  André

• What is the main difference between VMware vSphere 4 and VMware Infrastructure 3

  Hello friends,

  What is the main difference between VMware vSphere 4 and VMware Infrastructure 3?

  Kind regards

  Mustafa Rashid

  Take a look at the following documents, there are so many out there:

  http://communities.VMware.com/community/VMTN/vSphere (there is a new features pdf doc)

  http://blogs.VMware.com/VMTN/vmware_infrastructure_3/

  http://www.VMware.com/products/vSphere/small-business/features.html

  http://www.yellow-bricks.com/2009/04/21/vSphere-linkage/

  Here twopages which shows some of the different features and takes what licenses are supported which: http://www.vmware.com/products/vsphere/buy/editions_comparison.html and http://www.vmware.com/products/vi/buy.html

  Yet once if you just browse some of these links, you will get everything you are looking for and the wait is the product GA will tomorrow so look on release notes, etc.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Sharing folder between VMware and native system.

  Hi all

  I have installed ubuntu 8.10 and 2003 server which is my VMware. I need to share a folder between VMware and Ubuntu. Do I need to have the file sharing services installed?

  Help, please

  Thank you Houman

  HII houman

  Please try this LINK @ http://www.computerhope.com/issues/ch000465.htm

  concerning

  JOe

• Differences between VMware View and View Manager

  Hi all.

  What are the differences between VMware View and View Manager?

  Thanks in advance.

  Sincerely,

  Jean-Philippe

  The view administrator is the real View Manager administrator interface component.

  WP

• Red between VMWARE Y Pc

  Hola Saludos a toda the comunidad

  I have a problemita, espero me can cooperate.

  Resula instale VMWARE Workstation 7 y cree una Máquina virtual of Win xp pro... hasta ahi much todo... set it up the Red en modo bridge... tarjeta y todo is right, the virtual machine entered an internet sin problemas... y me responde el ping has the direccion tiene mi pc what are 192.168.0.2... y me lo responde por ip y por number...

  Pero cuando intento hacer mi pc... remote desktop no encuentra el pc... del mismo modo... Cuando hago desde mi pc ping has the virtual machine that has ip 192.168.0.3, not the fifth... neither por number nor por ip... Lo unico raro than veo are los adaptadores that crea el vmware tiene unas ip in otros segmentos red... in mi pc me creo estos dosadaptadores...

  VMware Network Adapter VMnet1 con ip: 192.168.8.1 mask. 255.255.255.0, configurado como: VMnet1: Host-Only

  VMware Network Adapter VMnet8 con ip: 192.168.186.1 mask: 255.255.255.0, configurado como: VMnet8: Nat

  Eso Además, el en virtual network Editor: tengo configurado VMnet0 como el in bridge...

  Como puedo hacer para las maquinas office to instale can comunicar between TR... Desktop remote por, y archivos compartidos between TR...

  The idea are crear una red extensively ellas como to hace normalmante

  Gracias

  Hola h2per,

  If you maquina esta in modo filled without deberias tener problemas ago that el of you red should häberle dado ip dhcp, so testeaste el ping between you pc is the virtual tienes unit resuelta.

  Well now, something that can be obvio pero no tanto, el habilitaste characteristic of control remote vm y/o en en you office?, por otro lado, habilitas el puerto 3389 en los personal firewall of the vm is of you jobs? tirale UN telnet al 3389 y fijate if challenged you.

  Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

  Please, do not forget the points of call of the "useful" or "correct" answers

  Best wishes / Saludos

  ________________________________________

  ING. Diego Quintana

  VCP 410 - VCP 310 - VAC - VTSP

  My Linkedin profile

  Join the Virtualizacion en Español group in LinkedIn

  ! http://feeds.feedburner.com/WetcomGroup.1.gif!

• Data store space used not maching between VMWare and 3PAR

  Hello world

  I have a strange behavior between our environment VMWare and 3PAR storage system.

  I checked each data store of our cluster and for each of them, the space used in vSphere Client does not match the size of the user 'used' their volume associated with 3PAR.  The value displayed in VMware is higher.

  For example, our data store named DS03 has space around 1 TB in VMWare.  And when I checked in the Console of 3PAR, I see that the volume created for this data store has a size of the user 'used' 722 GB.

  While doing some research, I came across this post: ability to store data about the free space is not the same thing in VMware and 3PAR

  But the problem I encounter is quiet different. It's the opposite. I do not understand why the displayed value is higher in VMWare...  We are also running vSphere Server version 5.1.0

  Any advice? Ideas?

  Thank you very much.

  It's the ASIC 3PAR inline zero detection function stripping zeros of incoming data until they land on the disc. Www.3parug.com try this happens a lot.

• Qual a difference between vmware vsphere, vcenter, workstation?

  OLA pessoal,

  Nunca trabalhei e com VMWare estou com doubt no deferred than tools vsphere, vcenter, workstation.

  Preciso testar uma Solução virtualizacao. Vou rodar dentro Windows 10, where seja, NAO preciso UM hypervisor rodando no como Hyper-V server hardware.

  So one size rodando no Windows para testar Doi servidores com some specific management.

  Me cadastrei no site da VMWare para testar a versão trial, mas não sei qual software download.

  ATT, Fabio

  Para sua need you can use o VMware Workstation or VMware Player o.

  Sober as diferencas, o VMware Workstation e uma Solução virtualizacao type-2, or seja, roda em cima of some system operational, alem do VMware Workstation we have outros exemplos como o VirtualBox e o Microsoft VirtualPC antigo.

  JA o VMware vSphere, ESXi e uma Solução virtualizacao do Tipo-1, or seja, roda diretamente em cima material, e por isso some vezes e re-usable chamado, e alem vSphere, ESXi, Microsoft Hyper-V and Citrix XenServer o o we have.

  Por ultimo, o VMware vCenter Server nada but as UM software para os servidores com VMware vSphere, ESXi gerencia.

• Unable to ping Virtual Machines between VMWare

  I currently have two VM installed and have two Windows XP.  I can ping the computer host for virtual machines, but I can't use a ping on the other. VM - get "Request timed out".  Two virtual machines are in network NAT configuration.  I also tried to put on a team, but they still cannot ping each other. Did I miss something? - I think that changing the Bridge connections can work, but I think that NAT should also work. - especially when they are in a team.

  Thanks in advance for the help.

  Make sure that the security/AntiVirus/firewall software does not block ICMP requests and if need be, temporarily disable the firewall/AntiVirus/security software during the test.   Note also that some AntiVirus/firewall/security software fix protocols on the network that are still activated card to temporarily disable the firewall/AntiVirus/security software.

  If it does not then need to see output of the ipconfig/all command on the host and the guests.

  Copy & paste the following commands, as is, and then press ENTER...

  On the host computer in a in a command prompt. (Start > all programs > Accessories > prompt)

  ipconfig /all > "%USERPROFILE%\Desktop\host_ipconfig.txt"
  

  This will create a file on the desktop of the host named host_ipconfig.txt

  On the guests in a command prompt. (Start > all programs > Accessories > prompt)

  ipconfig /all > "%USERPROFILE%\Desktop\guest_ipconfig.txt"
  

  This will create a file on the client named guest_ipconfig.txt Office

  Note: Of course change the name of the guest_ipconfig.txt file to make the difference between the guests.

  Archive the files together unreleased and attach the .zip file to a response message.

• What is the difference between VMware Player and VMware Workstation?

  I'm new here. I don't know what the right place to post this. My question as the title. Please guide me.

  With VMware Workstation you can create new virtual machine with VMware player, you can't.

  You can also check this post Why buy Workstation when the server or player is free?

  If you find this information useful, please give points to "correct" or "useful".

• Sharing LUNS between VMware Clusters

  We currently have a 3.5 divisΘe in farms host.

  Farms, they are further broken into clusters

  Y at - it problems with sharing LUNS between clusters in the same farm.

  I don't think that it is a good idea, but I can't seem to find any documentation indicating one or the other.

  Of course you must have shared LUNs within the cluster.  But it seems that you ask if you must share LUNS between clusters.  Yes at least one logical unit number.  This way if you need to move virtual machines between clusters, you can.  And of course you mentioned your lun model.

  Matthew

  Kaizen!

• Clonar office en caliente between different esxi Máquinas con vmware converter

  Estoy trabajando con currently varios servidores Vmware ESXi 4.0 Update 1. Estoy utilizando VMWARE CONVERTER version 4.01 para clonar las maquinas office of United Nations (local) UN esxi datastore has otro datastore otro esxi (local). In brief espero recibir una cabina discos y versiones con vmware HA, VMOTION, etc... El problema are real as debo thank office conversion realize antes las maquinas y aun parandolas, soon mucho tiempo. If conversion of uno of fisico servidores una a virtual late 2 horas, nueva Máquina virtual driving ahora y clonada mediante vmware converter a otro esxi soon approximately 8 horas. Alguien tiene the respond a mi problema? Me interesaria sober todo no thank the Máquina y saber if hay algun otro clonado procedure para delays menos tiempo.

  A saludo thanks!

  Hola,

  UNA opcion posible what me compares (tema obviando converter) that you do UN snapshoot temporal (depende del tipo mv hay than tener cuidado) y despues ' con calmed her "mueves (for example using fastscp/winscp) el fichero .vmx config y el hard store of data/esxi.

  UNA vez take her copia borras el snapshoot en el origen.

  There is!

  Been este are a process of copia y not clonado. Pero possible than also you sirva.

  Best wishes / Saludos.
  Pablo

  Please consider awarding

  all useful or correct answer. Thank you!! -

  Por favor considered premiar

  any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• Configuration of IPSec in VMWare ESXi can be applied to virtual machines running?

  Hello

  I have an operating system running inside VMWare ESXi 5.1.  Let's call is "MyLinux".  It is a modified version of Linux which does not support IPSec.  So I try to get VMWare to manipulate IPSec for MyLinux.

  I used esxcli orders to successfully create configurations for IPSec between VMWare itself and other systems.

  However, I wonder if I can use the same esxcli commands to configure IPSec between MyLinux and other systems?  In my tests, VMWare does not perform tunneling IPSec data between the running machines and other virtual systems.

  It is an illustration of the configuration I created for MyLinux in VMWare.  I also have a security policy that is not visible.

  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  --------                              -------------------------------------      -------------------------------------  ------      -----     ---------     --------------------               -------------------           --------

  MyLinuxToExternalSA MyLINUX.IPv6.ADDRESS EXTERNAL. Mature IPv6.ADDRESS infinity 0 x 300 transport 3des-cbc hmac-sha2-256

  ExternalToMyLinuxSA EXTERNAL. IPv6.ADDRESS infinite mature MyLINUX.IPv6.ADDRESS of hmac-sha2-256 0 x 256 transport 3des-cbc

  When I captured a trace TCP ping between MyLinux and the external system, MyLinux never sent the IPSec packets. Everything was sent in the clear.  This suggests that VMWare does not apply the rule for MyLinux, but I would like to confirm.  Thank you.

  Kwabena

  When you configure IPSec on ESXi, you sécuriserez the VMkernel traffic, not the virtual machine... If you want to protect the traffic of the virtual machine, you will need to enable IPSec on guest operating system.

  Here is more information on IPSec on ESXi: VMware KB: IPv6 and IPsec configuration on vSphere ESX and ESXi 4.1, 5.x ESXi

• IPSec on VMWare ESX 5.1 communication problems

  Hello

  We have 2 computer systems.  You running us VMWare ESX 5.1 and the other is running Ubuntu 14.04.  We have problems for IPSec to work between the two systems.  We cannot find any documentation or known issues with IPsec on VMWare ESX 5.1, so we're going to reach out to the community.

  Here's what we did:

  1. we configured Ubuntu and VMWare systems to use IPv6, we can ping each other using IPv6.

  2. we configure IPSec on an Ubuntu operating system by following the instructions below:

  https://help.Ubuntu.com/community/IPSecHowTo

  3. we have followed the instructions below to configure IPsec on VMWare.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1021769

  Here's the problem:

  When 2 Ubuntu systems run IPsec, they are able to ping each other.  However, when allow us IPSec communications between VMWare and Ubuntu, the ping is suspended.

  Here is the result of the configuration of command esxcli on VMWare:

  UBUNTU. IPv6.ADDRESS-> Ubuntu IPv6 address

  VMWARE. IPv6.ADDRESS-> address IPv6 from VMWARE

  
  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  --------           -------------------------------------  -------------------------------------  ------      -----     ---------     --------------------               -------------------           --------

  GoToDPSA UBUNTU. IPv6.ADDRESS VMWARE. Mature IPv6.ADDRESS infinity 0 256 transport 3des-cbc hmac-sha2-256 x

  VMWARE DPToGoSA. IPv6.ADDRESS UBUNTU. Mature IPv6.ADDRESS infinity 0 x 300 transport 3des-cbc hmac-sha2-256

  Name of the Source address Source Port Destination address Destination Port Protocol flow Action Mode SA

  --------          ----------------------------------------  -----------        ----------------------------------------  ----------------          --------       ----     ------     ---------      --------

  VMWARE DPToGoSP. IPv6.ADDRESS/64 0 UBUNTU. IPv6.ADDRESS/64 0 everything on transport ipsec DPToGoSA

  GoToDPSP UBUNTU. IPv6.ADDRESS/64 0 VMWARE. IPv6.ADDRESS/64 0 in ipsec transport GoToDPSA

  Here's what we found:

  After debugging the problem (using tcpdump), we found that the VMWare system sends the ESP packets, but never sends a package AH (required for IPSec authentication).  Even when the encryption protocol is null, the system of VMWare would always send ESP packets, but never once sent a package of AH.

  Here is the resulting execution trace: Ubuntu - ping-> VMWare:

  ...

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 16): ICMP6, an echo request, seq 1, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 1), length 160

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 17): ICMP6, an echo request, seq 2, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 2), length 160

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 18): ICMP6, an echo request, seq 3, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 3), length 160

  Summary:

  There seems to be a problem with IPSec in VMWare ESX 5.1 on IPv6.

  We noticed that the downloads section of the site support provided patches for VMWare ESx 4.x and earlier, but lack of patches for VMWare ESx 5.x.

  Are there known issues in this area or available patches to fix this problem?  Your kind suggestions would be greatly appreciated.  Thank you.

  Sorry for the late reply, but here the analysis of what is happening and why you are experiencing a problem.

  The Encapsulating Security Payload (ESP) to IPsec protocol will encrypt a payload of the packet and can

  Optionally authenticate the packages as well. You do not include orders allowing you to set the

  Security Association (SA) and political security (PS), but the output in your post indicates that you

  you want to encrypt the payloads both authenticate packets in mode of transport between the hosts.

  I don't know why the Ubuntu IPsec HowTo examples using protocols AH and ESP to encrypt and

  authenticate the packets. In our view, it is best done in a single step with ESP, ESXi only

  offer the option of AH with IPsec. Of course, this requires configuring the ESXi server and your

  The host with a configuration of IPsec compatible Ubuntu (or any other operating system).

  To illustrate, suppose the ESXi server has the address 2001:db8:1 and the host of Ubuntu has the

  address 2001:db8:2. We will use cbc-3des for encryption of the useful and hmac-sha2-256 load for integrity

  authentication mode of transport - just like in your message.

  On the ESXi host, the commands to do this might look like this (of course, you need to generate your)

  own keys and not re-use those I did).

  # Add the outbound security association ESXi

  esxcli ipsec ip network his Add.

  -sa-source = 2001:db8:1.

  -sa-destination = 2001:db8:2.

  -sa-mode = transport.

  -sa-spi = 0 x 200.

  -encryption = 3des-cbc algorithm-

  -encryption key = 0x6dd50fa97e919365d393fd0d404c655f80651316e9418682.

  -the integrity algorithm hmac-sha2-256 =.

  -integrity key = 0x730047c680d9812535a741bbb3521a29322cca77464cf16092519c4165ca6958.

  -sa-name = sa_1to2

  # Add the ESXi inbound security association

  esxcli ipsec ip network his Add.

  -sa-source = 2001:db8:2.

  -sa-destination = 2001:db8:1.

  -sa-mode = transport.

  -sa-spi = 0 x 300.

  -encryption = 3des-cbc algorithm-

  -encryption key = 0x50988e55ca6a0d0440cf0c29f80d308df884616ec4b55552.

  -the integrity algorithm hmac-sha2-256 =.

  -integrity key = 0xf76caa5b4985a8a9d1c7cedbcf43f21b83401818e3b8d5e526a8c99ff4d4baa7.

  -sa-name = sa_2to1

  # Add the outbound security policy ESXi

  esxcli network ip ipsec Ms Add.

  -sp-source = 2001:db8:1 / 64.

  -source-port = 0.

  -sp-destination = 2001:db8:2 / 64.

  -destination-port = 0.

  -top-layer-protocol = any.

  -action = ipsec.

  -output = flow direction.

  sp-= transport mode.

  -sa-name = sa_1to2.

  -sp - name = sp_1to2

  # Add the ESXi incoming security policy

  esxcli network ip ipsec Ms Add.

  -sp-source = 2001:db8:2 / 64.

  -source-port = 0.

  -sp-destination = 2001:db8:1 / 64.

  -destination-port = 0.

  -top-layer-protocol = any.

  -action = ipsec.

  -direction of flow = in.

  sp-= transport mode.

  -sa-name = sa_2to1.

  -sp - name = sp_2to1

  # List the ESXi security associations

  esxcli network ip ipsec its list

  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  -------  --------------  -------------------  ------  -----  ---------  --------------------  -------------------  --------

  sa_2to1 2001:db8:2 infinite mature 2001:db8:1 of hmac-sha2-256 0 x 300 transport 3des-cbc

  sa_1to2 2001:db8:1 infinite mature 2001:db8:2 of hmac-sha2-256 0 x 200 transport 3des-cbc

  # List the ESXi security policies

  List of the sp network ip ipsec esxcli

  Name of the Source address Source Port Destination address Destination Port Protocol flow Action Mode SA

  -------  --------------  -----------  -------------------  ----------------  --------  ----  ------  ---------  -------

  sp_1to2 2001:db8:1 / 64 0 2001:db8:2 / 64 0 everything on ipsec transport sa_1to2

  sp_2to1 2001:db8:2 / 64 0 2001:db8:1 / 64 0 in ipsec transport sa_2to1

  On your Ubuntu host, you need a compatible IPsec configuration. In general, on linux systems

  use the command setkey BSD-door, this is done by changing the system-wide

  in/etc/ipsec configuration file - tools.conf.

  #! / usr/sbin/setkey - f

  flush;

  spdflush;

  #

  # SAs ESP using 192 bit long keys (168 + 24 parity)

  # generated using: dd if account = / dev/random = 24 bs = 1 | xxd - ps

  # ESXi supports 3des-cbc, aes128-cbc, or null

  #

  # AH SAs using 256 bit long keys

  # generated using: dd if account = / dev/random = 32 = 1 bs | xxd - ps

  # ESXi supports hmac-sha1 or hmac-sha2-256

  #

  Add 2001:db8:1 2001:db8:2 esp 0x200

  E 3des-cbc 0x6dd50fa97e919365d393fd0d404c655f80651316e9418682

  -A hmac-sha256 0x730047c680d9812535a741bbb3521a29322cca77464cf16092519c4165ca6958;

  Add 2001:db8:2 2001:db8:1 esp 0 x 300

  E 3des-cbc 0x50988e55ca6a0d0440cf0c29f80d308df884616ec4b55552

  -A hmac-sha256 0xf76caa5b4985a8a9d1c7cedbcf43f21b83401818e3b8d5e526a8c99ff4d4baa7;

  # Security policies

  spdadd 2001:db8:1 2001:db8:2 all Pei in ipsec

  ESP/transport / / need;

  spdadd 2001:db8:2 2001:db8:1 all Pei on ipsec

  ESP/transport / / need;

  I have no problem of encryption and authentication of IPv6 traffic between a server ESXi 5.1

  and a host of 14.10 Ubuntu using this configuration.