Clonar office en caliente between different esxi Máquinas con vmware converter

Similar Questions

• Error clonando con vmware converter una maquina virtual en entorno esxi

  No can not copy con MVWARE CONVERTER una Máquina virtual an ESXi environment. The current situation are the following:

  -ESXi-01 Servidor con discos local con una Máquina virtual con Exchange:
  125 GB virtual disco (Disco C: 25 GB - Disco D: 100 GB).

  -REPLICA ESXi-02 Servidor con discos local con una replica (VMWARE CONVERTER) of the Máquina virtual Exchange than realizó habitualmente sin problemas.

  -El disco D of the MV of change to esta quedando sin espacio. Debo nao enlarge. VOY was the MV y creo UN segundo virtual Disco of 30 GB. Entro en el to the MV y en el administrator of clubs, realizó lo siguiente. Convierto en el disco-0 dinamico (discos logicos C y D) y los 30 GB al disco D. TODO OK momento agrego.

  -Name necessary ampliar mas los discos C y D para el futuro y realizó lo siguiente:
  1 rows with the CONVERTER of VMWARE ESXi of MV - 01 a ESXi-02 en destino generating virtual disco solo este paso UN 250 GB (Disco C: 50 GB - Disco D: 200 GB). Arranco the MV y veo that works correctamente.
  2 Desmonto el RAID Server ESXi-01 y return a montarlo al maximo el espacio ampliando. Instalo nuevo el entorno ESXi.
  3 return has con clonar the VMWARE CONVERTER MV en este caso ESX - 02 one ESX-01. Arranco MV difinitivamente ESX-01 are the Máquina en production. TODO OK.

  El problema are real in Quebec are not can not volver has the ESX - 01 one ESX-02 MV clonar. Me da los errores segun following training to realize the injerto:

  COPIANDO VIRTUAL DISCO:
  (OK) Task: Convert virtual machine
  (OK) Created the virtual machine "Exchange".
  (OK) Starting block at the level of cloning for volume "C:".
  Error: Failed to clone the drive 0 on the VM "Exchange".

  (Al 0% error)

  COPIANDO DISCOS C y d:
  (OK) Task: Convert virtual machine
  (OK) Created the virtual machine "Exchange".
  (OK) Starting at the level of files cloning for volume "C:".
  Error: Failed to clone the volume "C:".
  (Al 8% error)

  Comentar than aunque teoricamente el tamano del archivo en mi entorno esxi esta limitado a 256GB, el fichero generated in origen (ESXi-01) y tambien en destino (ESXi-02) are 262 GB. ESO if, yo it solo asignado al virtual disco 250 GB.

  Hola Antonio como estas?

  No en you estoy following del todo lo estas intentando realize vamos por partes:

  • The virtual disk solo Máquina-virtual tiene a con 2 particiones. Esto are asi?
  • If the esta Máquina virtual configurada como is indica in el punto anterior lo ordered hacer're durante el proceso of conversion are seleccionar the option to create a virtual disco para cada n y esta forma evitarias el exceso en el datastore tamano
  • Otra opcion en TR of're volver a clonar Máquina sin x the size of los discos pero doing that each n is convierta en un nuevo disco y este momento el unico disco esta generating problems are el D, una las options are directly ampliar el tamano del disco (siempre y cuando los don't discos sean different y no UN disco unico particiones) y luego con diskpart mover n hasta el final del disco
  • No entiendo porque estas serve there such do disco pero TR los desmontando're por a formateo tema y cambio tamano of blocks con los puntos lo podes avoid arriba las options

  Saludos,

  Nicolas

• replication between different versions of ESXi vSphere

  Hi all

  Is it possible to use replication between different versions of ESXi vSphere? the scenario is as follows.

  Source site:

  vCenter 6

  RS 6

  Replication Unit 6

  5.5 ESXi

  The target site:

  vCenter 6

  RS 6

  Replication Unit 6

  6 ESXi

  I understand that vCenter, SRM and VRA must match and vSphere replication 6 is compatible with ESXi 5 upwards and it is the vSphere host in the source location that replicates on the VRA rather than a host of ESXi target so it should work, but I wanted a certain Yes/No.

  Thank you

  Definite yes.

  VMware product interoperability matrices

  

• How to share data in the applications between different accounts of microsoft on the same PC

  Hi, I had been using windows 8 for over a month and that you have installed a * a lot of apps on the store. Now, I have to create a separate account from microsoft on the same PC. After having created, I find no way to use apps from windows of the older account store. And, certainly, I don't want to re-download applications for use on the new account. Is there a way to share data between different accounts on the same PC selected app? Thanks in advance, Praveen.

  Hi Samuel,.

  This is a free support. However, let me provide you with assistance on the issue of not being able to use the MS Office product on different user accounts. See the articles that describe how an application installed as MS Office can be used on another user account:

  Find and start Office applications in Windows 8 or Windows RT

  Also, for your further reference:

  Application does not appear on the start screen after the passage to another user

  I hope this helps. If you need additional help, then just reply back. Also, if you are faced with other problems related to Windows, it would be better to start a new thread of your own instead of posting in the thread on the other so that the new thread is no longer visible to the community.

• Move VMS between server ESXi and vSphere ESX server

  Dear all,

  I want to move some a vSphere ESX server virtual machines to ESXi server.

  I understand that some users will use CPS to move between the ESX servers, but apparently not for moving between different products.

  I'm just using a slow and prone to error method:

  The files of the virtual machine to my deskop PC of vSphere ESX server and then upload to the ESXi server.

  I would advise you to please all of the methods that is better than this one?

  Help, please.

  Kind regards

  Tommy

  If you got a central storage you can move virtual machines between the two products with vMotion. Since you don't seem to have available vMotion, you pouvez use scp. SCP has nothing to do with ESX/ESXi products. It is a Linux/Unix program which is available in both servers.

  So with the CPS, you need a little less.

  The syntax is like:

  SCP - r/path/to/vm/directory user@esxi:/path/to/new/location

  Concerning

• How do I sync and import/export bookmarks between different users on the same computer and two using the Firefox browser?

  All the help instructions are to import and export bookmarks bookmarks between different brands of browsers.

  Assuming that each of these different users use a different profile of Firefox. You can use the built in Fx4 Sync feature. Click on Setup Sync in the menu selections, create an account and then have each user created their profile to use this new account synchronization. It syncs more bookmarks; things like history, passwords, etc. So if it's only the bookmarks you are concerned with that, use customize only synchronize bookmarks when you set up each user. Good luck and have fun in sync.

• Script for random switch between different waveforms

  Hello.

  How correctly to write the script to switch between different waveforms when generating?

  For example:
  We use the niFgen allocate named Waveform VI to allocate three waveforms. When you run the generator, the first forms of wave of work. Then the generator is activated and used in the following waveforms only second and third.

  Or, we have configured 10 waveformsand by train to spend no fixed cyclically between everyone, but only between 2 and 5 waveforms.

  If it is possible to achieve?

  Max O.

  Developer of software and engineering,

  TeSLa.

  Hi Max,.

  Each stage needs, too.  End ifs should take place at the end.  For example:

  If scriptTrigger0
  
      generate a myWfm0
  
  on the other
  
      If scriptTrigger1
  
          generate a myWfm1
  
      on the other
  
          If scriptTrigger2
  
              generate a myWfm2
  
          on the other
  
              / etc...
  
          end if
  
      end if
  
  end if

  Of course, it must all be encapsulated in a repeated structure to continue checking for triggers.

  Kind regards

• data between different forms IE workorder number even workorder number forms

  Hi I'm looking for examples to convey a work order number, date etc. between different PDF files, I is according to what is the demand for maintenance, which will require different forms to fill out.  I didn't understand it before, but it can be done using fdf.  Someone has suggestions, examples

  Thank you

  Mike

  1. draw 2 different shapes with the SAME domain name. Page layout is not important.

  2. export FDF to a filled in file.

  3. import the FDF in the other file.

  If you do not find these functions please let us know your version of Acrobat Pro.

• How warns we reconnect when switching in demand between different module in 6.1.1.1.11?

  How warns we reconnect when switching in demand between different module in 6.1.1.1.11?

  Please, help me to understand this or fix it?

  Be sure to check that your containing remote access service is running. If it's not, restart the service and if it breaks down again, check the event logs.

  Ensure that the AuthenticationBridgeService is enabled in your EnvironmentSettings.config, and the user to remote access container is configured by using the SetupAssistant.

  
           
                 
           
          
           
               
  ....
  

  If the remote container Service fails, please contact Support with precision since the event logs.

• vMotion between different processors

  On my last job, I had two clusters vmware, using four hosts with HP DL580 servers and the other with two hosts in a HP BLADE system, I don't remember the model.

  So when I tried to move an active VM for clusters to each other, I got an error, so I'm looking here on community and I got the awnser is the reason the hosts had different processors and I can only move this virtual machine, if they are closed. If I can only move cold VM between my cluster.

  OK im on a new company name and they had M$ Hyper-V and now we are migrating to VMWARE (cool ) we have two DELL Poweredge servers, one with two Quad-Core Xeon X 5470 and the other with two Xeon Quad - Core E5320.

  So I guess I'm having a problem of fact a vmotion hot between it because the servers have different processors.

  So im buying new processors, but I find only Xeon Quad-Core X 5365, I think that it corresponds to that of the X 5470 but with cache and diferrent clock.

  My ask is, can I do a hot Vmotion with some VM of a Xeon X 5470 server on a Xeon X 5365 server.

  Stability of Slackware, safety and simplicity are the best choice!

  Yes,

  the vmotion VMs between different generations of cpu is only posible to put these hosts using Enhanced VMotion (CVS).

  Improved compatibility for VMotion (EVC) simplifies VMotion compatibility issues

  through the generations of CPU. EVC automatically configures the server with Intel CPU

  FlexMigration or AMD - V extended Migration technologies

  compatible with the old servers. After EVC is enabled for a cluster in the

  VirtualCenter inventory, all hosts in this cluster are configured to

  present identical CPU features and compatibility for VMotion CPU. The

  features introduced by each host are determined by selecting a predefined EVC

  base line. VirtualCenter does not allow the addition of hosts that cannot be

  automatically configured to be compatible with EVC baseline.

  To use CVS, you must run ESX Server 3.5 Update 2 or

  highest with Virtual Center 2.5 Update 2 or higher and have only compatible CPUs

  are listed in one of the following tables.

  CVS does not allow for migration with VMotion between Intel and AMD processors.*

  VCA makes it much

  easier to add servers with the new generation of processors in existing clusters

  containing a material more former generation. Entering an EVC cluster servers are

  automatically configured to be compatible with the hosts already in the

  clusters. Since this process is automatic, EVC is very simple to use and

  requires no expertise on CPU features and masks.

  Suresh

• VMotion between 2 esxi housts

  Hello

  I have an ESXi server run a virtual machine, I need to move to a new host ESXi on its local storage space.

  Is this possible and how?

  Thank you

  If you have vCenter Server, you can keep it simple with a migration.

  Without it, you can use different solutions (the virtual machine must be off):

  -PCS or similar (but he must firstly enable SSH)

  -VMware Converter

  -Navigator Datastore (save to a local PC) and use on target for download files.

  André

• How to communicate between different applications on 1 Server?

  As the title says: how to communicate between different applications on 1 Server?

  I'm new to FMS and I am trying to build a program that I need to have a communication between 2 or more applications on the same server.

  How to do this?

  There are several ways to do so.

  1. the favorite for me is make a NetConnection instance of an application to another and make calls between the two using .call NC on one side and client.call interface on the other side

  2. you can use the objects proxy shared to affect this change even

  3 build your own interface for that use the remote features

  Just some thoughts.

  ASA

• 6u2 ESXi host nested on VMware Workstation for Linux referee v12

  Hello all, I have

  I have a lab environment virtual running in VMware Workstation for Linux v12, and my ESXi hosts do not work correctly on one of the virtual networks. All my troubleshooting suggests a problem with nested ESXi hosts that may be a bug, but I want to assure you that I did everything properly first. That's why I post here with the hope that if I made a mistake that maybe someone else can point out he me.

  Physical system

  8 core Intel Xeon 2.1 GHz CPU

  128 GB of RAM

  OS - kernel Linux 64 - bit w/3.19.0-32-generic Linux Mint 17.3 (fully updated from this announcement)

  VMware Workstation 12 Pro - 12.1.1. Build-3770994 (fully updated from this announcement)

  Nested ESXi host VM

  ESXi v6.0.0 (Build 3825889, completely updated from this announcement)

  4 cards 'physical' (only 3 used for now)

  -all use the e1000 NIC hardware virtual, but also tried vmxnet3 NIC with no difference

  -vSwitch0 use vmnic0 & 1 vmnet16 of virtual network in a pair of active / standby

  -vSwitch1 uses vmnic2 on network virtual vmnet18

  -vmk0 used for management on vSwitch0 and vmk1 for iSCSI on vSwitch1

  -"Promiscuous" mode and forged passes enabled on all Port vSwitch groups (activating or turning off these features makes no difference)

  Test performed until now

  I checked that all the IP addresses and network masks used are correct.

  With the help of vmkping I ping other nodes on the network vmnet16 with success.

  With the help of vmkping I tried to ping the other nodes in the network vmnet18, but that has failed.

  I have depolyed other non - ESXi VMs on the vmnet18 network, and they are able to ping each other, but are unable to ping or ping by the ESXI host.

  I tried various material virtual NIC as mentioned before, but without changes in the results.

  I tried to use only local network instead of the vmnet18 guest network segments with no change in results.

  When I find out the status of the network adapters on the ESXi host through vCenter or host incorporated client vmnic0 & 1 time display network information, but vmnic2 shows no networks. Yet, I know that there is a network with different VM communicate on it. Moreover, I was able to get all of this work on a Windows system running 10 Workstation (this is the laptop that my employer gives me with).

  Having built nested ESXi labs on different platforms as well as physical environments in the past, I'm very confused as to why I can't get this special configuration to work. At this point my gut tells me that this is probably a bug any with the nested themselves ESXi hosts. Since I can get all this work on vmnet16 including the management of ESXi hosts and the VCSA that I use, I am sure that my vSwitch configuration is correct (other than the IP address space and vmnic configurations is bascially the same). Because I can get other virtual machines to communicate over the network vmnet18 I don't see how can be a VMware Workstation for the issue physical Linux host. Is there something obvious I'm missing here? I read on the ESXi hosts nested under VMware Workstation after having known problems and bugs with networking. If anyone else has experienced this?

  Thanks for any help others can provide!

  Kind regards

  Patrick

  Well, the problem is now resolved. The problem was what covelli was trying to explain, but I couldn't because the physical host network adapters being mentioned.

  The problem on the Linux host, but it was a problem of permissions with the virtual Ethernet adapters. The following article has the fix:
  With the help of Ethernet virtual cards in Promiscuous Mode on a Linux host (287) | VMware KB

  Even if I launched the workstation under the root user I have yet met this problem and which still makes no sense to me, but change the permissions solve the problem. I was not getting an error message on my Linux Mint and Ubuntu system, but when I tried on a second box of Linux Mint that I just got the error has been generated, and the error message was the above link it contains.

  So, here's what I learned:

  (1) the question has nothing to with a VMware Workstation definition that you can configure.

  (2) the question has nothing to do with a physical network card.
  (3) the question has nothing to do with any vmnic on the nested ESXi host.

  (4) apparently virtual Ethernet adapters are not the correct permissions when created.

  All you have to do to fix this is:

  (1) open a terminal.

  (2) run the command ' sudo chmod a + rw/dev/vmnet * "(don't forget to run this each time that you create a new virtual network).

  You can also create a group, as shown in the link above and simply give this group the correct permissions. Personally, I think it's easier to just give everyone the rw permission.

  I appreciate the help that others have offered. I did not understand what was asked for in previous answers because of the terms that have been used.

• Problemas al convert Máquina con fisica RHEL5 a virtual ESXi 3.5 en con vCenter Converter Standalone 4.0

  Buenas a todos,

  Tengo problemas al try convert Máquinas con Red Hat Enterprise Linux 5 a physical Office ESXI 3.5 U3 en Máquinas.

  El software used are el VMware vCenter Converter Standalone 4.0, that supone are compatible con RHEL5.

  In los pasos cuando estoy present, hay a unos paso in el that the das the IP y el user/pass del ESXi, pero veo has the right information that are compatible con:

  Supported VMware Infrastructure products:

  • ESX Server 3.0, 3.5

  • ESXi 3.5 integrated

  • VMware vCenter Server 2.0 or 2.5

  OS wonder if any ha intentado hacer lo mismo that yo y TR ha probado con el ESXi (embedded Sin ser el) y lo ha height, igual no y compatible are yo aqui intentandolo... aunque espero Québec no ASI sea.

  AA±ADO puedo conectarme desde el vCenter Converter has the Máquina física y sacar el tamano of disco, etc. y también al ESXi y ver las maquinas office as tengo, aunque cuando present will por el 1% me da UN FAILED.

  Gracias por vuestro tiempo

  Hola, Gonzo

  Me going to a perdonar, pero pienso than Sigüés having problemas por el comment mistake red.

  Need configurar el en the virtula machine assistance network. Te ayuda sacada del VMware Converter information Editor:

  During the conversion of the source physical machine running Linux, Converter Standalone creates a virtual machine to help on the destination host

  (VCenter or ESX). The virtual machine to help requires network access to the source computer to clone the source files. Apply the default conversion settings

  automatic acquisition of IP address and DNS server for the virtualmachine Helper. The following procedure to manually configure this network connection.

  Procedure

  1. on the view/edit

  Options page, click VM to support network.

  The network settings pane opens to the right.

  2. (optional) to assign an address select static IP the virtual machine to help, use the

  After the IP address: specify the IP address, subnet and default mask

  entry door. Don't forget the address IP that you specify for the virtual machine to help is not already in use on the network.

  3. (optional) to configure the server address DNS manually, select use the following DNS server

  address: type the preferred DNS server address. Possibly type and substitute the address of DNS server.

  4. Select another option to set or click next to view a summary of the conversion task.

  Converter Standalone uses the IP address and the DNS server specified to copy data from the source Linux machine to the virtual destination

  machine during the conversion.

  Saludos,

  Jose Maria Gonzalez,

  -

• Cannot open ESXi 4.1 in VMware Workstation 7.1

  I installed ESXi 4.1 in VMware Workstation 7.1 several days ago, and it worked fine.

  But I can't open ESXi 4.1 now. I need someone to help me solve this problem.

  The error message is:

  «You have configured the virtual machine to use an operating system 64-bit client.»  However, the 64-bit mode is not possible. This host is VT-capable but VT is disabled.

  It's usually because that VT has been disabled in the BIOS/firmware settings or host was not powered by bicycle since changing this setting. Please:

  (1) check that the BIOS/firmware settings enable VT and disable "trust execution."

  2 turn on the host, if one of these BIOS/firmware settings have been changed.

  (3) turn on the host if you have not done since the installation of VMware Workstation.

  (4) update of the BIOS/firmware from the host to the latest version. »

  I do not change the bios setting after the installation of ESXi. And I just checked the bios, it shows that VT is enabled.

  So I don't know what the problem is.

  PS: My laptop is HP 8540w, the processor is intel i5.

  VMware - 0.log shows that VT - x is disabled on this system:

  18:20:07.257 Sept 14: vmx | CPU [0]: MSR 0X3A = 0X1

  18:20:07.257 Sept 14: vmx | CPU [1]: MSR 0X3A = 0X1

  18:20:07.257 Sept 14: vmx | [2] CPU: MSR 0X3A = 0X1

  18:20:07.257 Sept 14: vmx | CPU [3]: MSR 0X3A = 0X1

  Bit 0 of this MSR is the bit lock, preventing further amendments to this MSR without a power cycle.  Bit 2 is the bit to enable VT - x, and that the ILO is disabled.  The value that you want for this MSR is 0x5.

  You have hibernated the system since you were last able to use VT - x?  You can have a buggy BIOS that fails to enable VT - x, then wake up from hibernation.  I check the BIOS settings and then turn on the machine to see if you return enablement VT - x. After a power cycle.