Duplicate a path?

Similar Questions

• Transform a shape layer with several groups/paths in another?

  Hello

  I'm trying to turn the form A B-shaped into aftereffects.

  

  Both are drawn in illustrator, and I imported into aftereffects and diverted path to forms.

  At the moment I do a key framing color and the path in the sticky on the form A and form B. From there I will meet with two questions.

  (1) for now I have to manually open each group, every path, every feature of color until I'm able to keyframe them. After that I have to paste the keyframe of the track and keyframe colors individually to the corresponding group. It's doable, but I have to turn the form in 10 more other variants. Just want to check is there a shorter way to the key all the way to access and color properties frame. And then copy all of the keyframes from one form to the other.

  

  (2) I noticed that not all the points on the path are created equal. I think that the "starting point" is noted with an extra box compared to other points.

  

  As the "starting point" of a path is different from the rest, the transition has become weird.
  Can I check if someone knows how to change the "starting point" to another point on the same path? Or y at - it another way of fixing?

  Finally, if there is more easy morphing shapes to another, I'll be happy to listen. Thanks a lot ~

  I would do this kind of thing differently and 90% of the work in Illustrator.

  I would like to begin by drawing a path in Illustrator, to duplicate the path and to change the size and position and change the color of the outline of the color I wanted for the inside of the first form at the beginning of the animation.

  

  I use then the gradient tool to create a blend between the two forms specifying the number of steps, so my first form duly filled out for one frame looked like this:

  

  I would then do the same for my second form by using different colors, so I got this:

  

  With the two mixtures on you will see this:

  

  The upper mixing layer is where your animation will start and the bottom is where your animation should end.

  The next step is to select Merge layers and spread the mixture, if you find yourself with two groups:

  

  Here comes the fun part. Select groups, and then specify the number of steps you want as long as the number of images that you want in your animation. In this case, I want a second 1 transition and my comp is 29.97 FPS, so I selected 30.

  

  Now spread the mixture:

  

  We should end up with a group at layer 1 with 30 subgroups:

  

  Ungroup the higher group only then deselect all layers and select a single layer, then choose release to layers (sequence).

  

  now select all sub layers in the layer panel and drag it above layer 1. Layer 1 is now empty, so you can delete:

  

  Save the file HAVE and import into AE as a model with the size of the layer keeps selected:

  

  [Open the model, select all layers, move the a CTI frame to the right by pressing Ctrl/Cmnd + arrow to the right, then press Alt/Option +] to set the out point of all layers and then the wizard from keyframe to the layers in sequence without overlapping:

  

  I usually go to the point of exit of the background layer and press N to set the work area exit point, then cut the comp to work area.

  

  This model is then nested in your main comp and you can activate the time-remapping, so you can change the speed and use CC force motion blur to smooth animation.

  

  You will find it much easier to create the morph to a shape layer in Illustrator those in AE, you don't need to convert anything to forms and most of the work is done for you before you start. Total time to create this project with about 1/4 of the time it took to create this post.

• Path of Powerlifting bar

  Hello

  As a powerlifter, I would like to know if it is possible to follow the path of the bar during a squat, with a small line.

  I tried already with the Track Motion fuction. It can follow the barbell perfectly, but I don't know how to do some sort of line to track motion fuction so I can see how vertical my barbell way is during the squat.

  Thanks in advance

  Already explained how to do this. Try this to get the idea.

  1. Start a new comp takes 10 seconds
  2. Use the pen tool to draw a path with no fill and a stroke of 10 pixels
  3. With the shape layer selected, press the U twice to reveal all the changed the layer properties
  4. Use the Add button to add paths of toppings
  5. Add a keyframe for the End property and set the value to 0 and the line should disappear
  6. Move the CTI at the end of the timeline and change the value to end at 100

  Apply this principle to the path that you want to animate. You will have will be to add several keyframes and make adjustments to get the calendar to work perfectly.

  You will have to carefully go through the timeline and animate the end point. If you want to have more than one line then you need to duplicate the path and adjust the start and end points. There is no automatic way to pick up with precision timing of the trajectory. You can write an expression that was binding on the percentage of completion for the trajectory of the null to the percentage of the End property of toppings (or stroke or paint) paths, but it would be too complicated for me to write it without the æ and try to understand. It might be a good thing to create and save for later use as a predefined animation, but it is not a task for a beginner.

• How to copy a path on top of itself?

  Hi, first post here.

  This has been frustrating me since I started to learn Illustrator. There are two options to copy a path or object:

  -Copy and paste then

  -Move in now the Alt key (or control on Mac)

  Unfortunately, none of these not an easy way to copy directly on itself in the same exact location. Just to duplicate a path given in the exact spot as well as the selected path.

  I usually copy it using the move-Alt and then bring her back on himself using Snap To Point, but seriously? Who is delayed and should not be necessary. With very complex compositions, sometimes it and that it corresponds to 100% are more difficult than you think.

  Thank you

  S,

  You can Ctrl / Cmd + C + F (hold Cmd/Ctrl while pressing C, and F).

• My CS6 illi seems glitchy when it comes to compensate FOR the paths. No miracle solution?

  One of the things bigger, than I do in Illustrator CS6 is OFFSET paths. In CS5, he would remember what was my last distance, as well as what type (bevel, round, etc.).

  But this CS6 don't remember. He always default ".1389 - miter" and then adds the offset as a striped instead of a real extended object.

  The first choice is CS5, the way I like it to be:

  

  a duplicate, separate path/object.

  Instead, CS6 gets this treatment:

  

  the object SEEMS to be "rubbed" to 1/4 ".

  Can I have a product glitch? I have not clicked a certain box? Am I missing something?

  This adds a surcharge of 3 steps in each process that I do (I know, I know... 1 global and other problems).

  Thanks in advance.

  Don't think that reinstall will change behavior.

  The route of the menu object using not work as expected for you?

  Mike

• Coloration of the paths of the same object differently?

  I hope I am on the right terminology here... Imagine a square drawn by the pen tool. A square with a line and filling. What I want to do is to 'none' color of two opposite sides (strokes) of the place while keeping the inside fill color. What is the best way (or indeed any way) to do this? It should be very simple, but has been driving me crazy here!

  Thank you

  CGG

  Duplicate the path, split the path to its anchor points, remove unwanted segments. then apply the stroke to parts and fill only to the original.

  Mylenium

• How can I change the starting point of a path?

  It bothers me when I use brushes for a path shape/access line. Is there a function to change the starting point of race in the direction of the form/reverse of a path?

  You won't need to duplicate the path. Just select it and then change the options for this object. There is a button in the Panel forms for this.

• text on a path, how stroke you the path

  I know how to make a path and put the text in this way.

  There must be a cleaner way to apply a line on this route (vs duplicate the path to start which is what I'm doing now).

  Thank you!

  Nick,

  You can DirectSelect the path (click the direct Selection tool on the invisible way, Smart Guides can be your friends) and apply the line (you can change none at the bottom of the Toolbox or set a race weight in the stroke palette/Panel).

• Creation of objects which are based in what is the size?

  Is it possible to mix objects compared to the size? I'm looking to achieve this (see image below). the triangles on the bottom is bigger and more "BOLD", and as you move upward, it begins to decrease in height.

  I'm just better do this manually? Thanks in advance.

  

  You have shown what are your results, but your description of what you did and what you want is vague.

  You say you want to mix the two triangles have their widths to change and their heights remain the same? If so, then simply pull the two main objects in this way:

  1 draw the big triangle in horizontal orientation, like the triangle below on the displayed image.

  2. the duplicate. It was the duplicate to where you want the highest triangle.

  3. Select both. Create the mixture with the desired number of steps.

  4 white pointer: select the upper triangle. Select the far right anchorPoint and move it to the left.

  If the image depicts no unintended outcomes, but what you're trying to accomplish, then do the same thing, but also to change the height of the object higher key of the mixture. (Select just its two anchorPoints left and their scale).

  You could also do this same thing, creating a triangle pointing to the right brush, drawing two lines open to different lengths, then mix the two paths:

  1. the rectangle tool: click (don't drag). Specify a square.

  2. double-click on the rotation tool. Rotate the square 45 degrees.

  3. less than the pen tool: click on the leftmost anchorPoint to remove.

  4. slide the triangle from the palette shapes. Define an Artbrush with its head pointing to the right.

  5 line tool: Shift drag to create a horizontal path length of the larger rectangle.

  6 duplicate the path. Drag it to where you want the upper triangle upward.

  7. apply the triangular brush on both paths.

  8. create the mixture with the desired number of steps.

  9 WhitePointer: Select the upper triangle (object key). Select the anchorpoint right to change its width.

  10 change the weight of the race to set the 'weight' of the triangle (indeed, its height.) Similarly adjust the weight of the race of the triangle below.

  JET

• Pen, top conversion tool, they do seem to work in CC2014, as they did in aid of the CC.

  I'm doing something that I for a long time. Change the shape of the solid square. Don't know what to do?

  Nothing has really changed. Are you sure that you have chosen Bezier roto when the path was created? The other thing that could happen is that you create a shape with the rectangle tool layer and you have a rectangle instead of a path. Without further explanation, it will be difficult to understand what goes wrong.

  Press G to bring up the pen tool. Hold the Alt/Option key to change the tool pen tool convert vertex (small V on the side). Press the G button to bring up the pen tool, if you are working on a mask. Press the V key to bring up the direct Selection tool to select vertices or shape paths. Hold down the command/Ctrl key with a path of selected shape to duplicate (a black and a white arrow head appears) to duplicate the path when you click and drag. With any vertex selected, click and drag on the layer to select several vertices...

• RMAN duplicate grave crashes when I'm trying to change the paths of the destination

  Hello community,

  I am trying to duplicate a database of PROD for a test environment using the basic backup technique. I test the script in double and everything works fine when the paths of the database "auxiliary" (the database that I am creating) have the same paths as the basis of the 'target' (the database of production). If I change the paths, the double has failed because it does not find a backup of controlfile:

  channel ch1: from the restore backup set data file

  channel ch1: restore the control file

  channel ch1: reading of the backup piece PROD_cf_c-2175092736-20151204-0 c

  channel ch1: ORA-19870: error when restoring backup piece PROD_cf_c-2175092736-20151204-0 c

  «"ORA-19507: failed to retrieve the sequential file, handle ="PROD_cf_c-2175092736-20151204-0 c", parms ="»

  ORA-27029: skgfrtrv: sbtrestore returned error

  ORA-19511: error received from layer media manager, error text:

  < PROD_cf_c-2175092736-20151204-0 c > backup file not found in the NetBackup catalog

  This is the script that works, but if I have the same structure of directories in PROD and TEST (but this isn't a real scenario):

  run

  {

  allocate auxiliary channel ch1 device type sbt;

  Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"

  duplicate database for TEST PROD

  until 'sysdate-2/24.

  NOFILENAMECHECK;

  output channel ch1.

  }

  
  

  And this is the script that it does not work because I have the PROD and TEST different directory structure
  

  run

  {

  allocate auxiliary channel ch1 device type sbt;

  Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"

  duplicate database for TEST PROD

  until 'sysdate-2/24.

  SPFile

  control_files value ' / TEST/orabd1/ctl/control_PROD_01.ctl','/TEST/oralog1/ctl/control_PROD_02.ctl','/TEST/oralog2/ctl/control_PROD_03.ctl '

  db_file_name_convert value "/ PROD /", "/ TEST / '.

  the value log_file_name_convert "/ PROD /", "/ TEST / '.

  core_dump_dest value "/ TEST/oralog1/cdump".

  the value 'TEST' db_name

  Set diagnostic_dest ' /TEST/oralog2'

  instance_name must bring 'TEST'.

  all local_listener 'LISTENER_TEST '.

  Set log_archive_dest_1 ' LOCATION = / TEST/arch.

  the value of log_archive_dest_2 'LOCATION = NULL'

  ;

  output channel ch1.

  }
  
  

  I tried to restore a Netbackup file and it works. I try to duplicate a database when the structures of directories are identical and it works. Why it's a failure when I change the destination paths?

  Thank you!

  Marina.

  Hello

  We had a similar problem in our shop. In our case, that we never knew if she was related to Oracle or NetBackup, but we found a Bug of Oracle, so we think it was a problem with the Oracle.

  Bug 11783792  RMAN SEND command does not hold the value of the variable

  DOC - ID 11783792.8

  
  

  Rather than send 'NB_ORA_CLIENT = DCLI, NB_ORA_POLICY is BD_DC_2, NB_ORA_SCHED = Full_Diario';.

  try something like this:

  Run {}

  allocate channels ch01 type 'sbt_tape' PARMS 'ENV =(NB_ORA_CLIENT=DCLI) ";

  Send "NB_ORA_SERV =';"

  Restore settings

  output channel ch01.

  }

  Let me know if it helps.

  Kind regards

  Ferran

• Direct path SQLLDR allows duplicates in the primary key

  I would use sqlldr path direct to charge millions of records in the table but direct way allows duplicates on the primary key constraints.
  
  inserts of duplicates
  sqlldr control deploy_ctl/deploy_ctl@dba01mdm = direct ctl_test.ctl = true
  primary key is enabled
  
  I do not understand the behavior that's why the primary key is always enabled--(logiquement il doit avoir désactivé que doublons insérés)
  
  Inserts no duplicates
  sqlldr control = ctl_test.ctl deploy_ctl/deploy_ctl@dba01mdm
  primary key is enabled
  
  Please can I know if there is any work around to use direct path with constraints of primary school in place.

  The only solution is to not use direct load, if your dataset contains records in duplicate, of the documentation:

  /*
  A record that violates a UNIQUE constraint is not rejected (the file is not available in the memory when the constraint violation is detected).
  */

• Duplicate BGP AS path

  Hello guys,.

  Today at awkward work something caught my attention.

  The situation returns to BGP, when I run the command sh ip bgp, the output gives me this:

  RT52162 #sh ip bgp
  Version of BGP table is 56, local router ID is 10.10.0.16
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight
  * 0.0.0.0 172. **. 161 50 0 15 * 15 * 5 5 65010?
  *>                                 172.**.***.169                              0          15**5 65010 ?
  *> 10.**.0.16/32        0.0.0.0                                            0            32768 ?
  *> 10.**.0.0/16          0.0.0.0                                            0            32768 ?

  The part "BOLD" of the output is exactly the same thing, and this connection works on ATM.

  I can't understand this question, so if someone could explain to me why this is happening or how can we solve it, I have other sites configured the with the same configuration and it gives me the same exact result.

  Hello

  The nearby 172.xxx.xxx.161 done AS_PATH adding by adding at the beginning of his time number one DID when advertising the default route so it is considered to be a neighbor of backup.

  Concerning

  Alain

• Duplicate path

  I missed probably just either notification that it was not put into work, or simply does not know how to do.

  In Audition 3 you can right-click on a clip and then duplicate and then specify how often you want to duplicate. In hearing CS6, it seems that the clip of duplication has put on a new track with the same settings/fx/etc... This is very useful, but I can't understand how Audition 3 duplication flavor?

  If you right-click on the clip and select the loop, you can and pull the right end of the pliers to extend in itterations as much as you wish.

• How to duplicate a text element and convert it into paths?

  Hello

  I'm totally stuck. I can't duplicate a selected TextFrame and make an outline of it. I tried "MyChoice.TextFrame.createOutline ()", but he told me that "undefined is not applicable. What I am doing wrong?

  Environment: Illustrator CS4, ExtendScriptToolkit, Javascript.

  Help!

  Moebius

  mySelection var = app.activeDocument.selection;

  for (j = mySelection.length - 1; j > = 0; j-) {}

  Alert (mySelection [j]. TypeName)

  If (.) TypeName mySelection [j] == "TextFrame") {}

  mySelection [j] .createOutline ();

  }

  }

  There are a few things that you mixed like me dun time now to explain, above is a working code (I think that Yes...) ... I'll be back later with an explanation

  see you soon;