Path of Powerlifting bar

Similar Questions

• Path Bar - recovery bridge - need to re - click on display every time?

  Is it possible to make the bar always visible path?

  Whenever I raise the bridge it is gone, and I have to go to the window > path every time - bar even if I save it as showing in a personalized workspace - is this a bug?

  Bridge 3.0.0.464

  This isn't normal behavior, it happens sometimes that the path bar

  disappears that it itself, but certainly not all the time that restart you.

  I would say you restart Bridge by pressing the option key and click

  update preferences in the menu that appears. Set preferences again to

  your wishes and give him another chance.

  Is it possible to make the bar always visible path?

  Whenever I raise the bridge it is gone, and I have to go to the window > path bar

  every once - even if I save it as showing in a personalized workspace - is this a

  bug?

  Bridge 3.0.0.464

• Showing the full path of the file in the Save as dialog box

  I'm a relatively new for MAC OS and I took the habit of intelligent services on Microsoft file manipulation, in particular to the Save as dialog box. Who has a little smart "arrows" and "buttons" allowing you to ask around the system of files easily, but I faced something else in the MAC operating system.

  Finally, I was able to pass on the path of file bar in the Finder (basically, that nice, small bar with the name of folders/sub-sub-sub-folders you can switch to and it shows "where you are both in the file system"), but I don't miss the Save as dialog box. I tried to find it in the settings to turn it on, scoured the internet, talked with experts at Apple, also called the central phone number, but I couldn't learn all solutions to get the bar path of file under tension to the Save as dialog box.

  And believe me, it's very annoying, when you create a file structure when you register under ' week/Tuesday/XY client Documents/work/approvals/journal/2016/August/2nd /' a file and for the recording of the version changed the same file under the same path, but not to not only return to the file a subfolder creation there AB of the customer, I have to click again through the whole lot.

  The arrows 'story' don't help because when I click on the it puts me directly to record under the folder where I have the last recorded the previous file, or help click on the drop-down above, where records are listed because I could never find the subfolder where I want to go back to there.

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  ..., and I don't want to keep a Finder opens just to copy..., on the way to the record, which was the same effort and has been even more professional!

  I would like to just turn this simple file path bar,..., even that which is available in the Finder!

  Any ideas would be appreciated, thanks for sharing your thoughts in advance, Ian

  Imre of Glen Waverley wrote:

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  1 NO.

  2. we are all just users here and have no info about Apple's plans.

  If you do not want to let Apple know your feelings, you can send your comments here.

  http://www.Apple.com/feedback/

• Output device - configuration of the handle bar not to change

  This question has me left speechless.

  Usually, I run the application using device-Release configuration. Yesterday, after construction with Simulator-debug, I turned back on build to release device configuration.

  Now I find that whenever I build the application, the active path in the bar - descriptor.xml automatically converted to the x 86 instead of arm/o.le-v7/. I can't run the application in release device mode now because of this automatic conversion.

  
         armle-v7
         lib/libBBCommonDatabase.so
         TestApp
     

  Clean up the project and build the project in the peripheral output mode before the race.

  I also facing the problem when I did as out of fashion Simulator to the peripheral debug mode.

  So try this one maybe it will help you.

• Build in-circuit debugging mode, but build in release mode fails.

  (crosspostes of https://developer.blackberry.com/html5/documentation/v2_2/build_and_sign_your_app.html#comment-17767... suite application to do here)

  In "%HOMEPATH%\AppData\Local\Research In Motion" I can see:
  bbidtoken. CSK
  (downloaded using my ID staff blackberry)
  barsigner.DB
  barsigner. CSK
  Author.P12
  (previously obtained and functional files for a provider - I signed WW1 and Momentics with these in the past)

  I have linked files as indicated by practice
  BlackBerry-sign - linkcsk - bbidtoken bbidtoken.csk - oldcskpass (password) - bbidcskpass (password)
  who responded
  News: CSK connected successfully to BBID

  When I try and build mode release web page, the following build log is displayed:

  [INFO] Target Q10-(pine) selected
  [INFO] The application of filling source
  [INFO] The analysis of config.xml
  [INFO] Generation of output files
  [INFO] Package created: (path)\simulator\bb10app.bar
  [INFO] Package created: (path)\device\bb10app.bar
  [INFO] Error: The file BBIDToken does not exist.
  [INFO] An error has occurred
  An error has occurred

  The message "BBIDToken file doesn't exist." is incorrect. There are still in 'C:\Users\username\AppData\Local\Research In Motion', and the two paths 'place' on the page "certificates" in the GUI Webworks web page point to the right place.

  A build command line "webworks build - version k (password)" gives the same "error: file BBIDToken not exist. ' error.

  Any suggestions where to go from here?  If this isn't '%HOMEPATH%\AppData\Local\Research In Motion', what directory the nonexistent bbidtoken.csk in?  I can verify that the "Info: CSK connected successfully to BBID ' really happened?

  It solved!

  The problem was that on the "Global settings" (not "certificates") page there is the following text:

  "Signing of the release certificate configuration.
  Location of developer certificate

  The file at this location will be used instead of a certificate installed for release builds. This location must contain the file name of the p12 file.
  Location of token BBID

  The file at this location will be used instead of a token BBID installed for release builds. This location must contain the file name of the csk file. »

  The text of the latter was "c:\Users\A.Townsend\AppData\Local\Research In Motion\bbidtoken.csk" (with a space left incorrect).  When I removed this text altogether, I got is no longer the "error: file BBIDToken not exist. ' error and a Release version work OK.  I didn't need a file of bbidtoken.csk; It worked OK with key legacy.  In turn, this means that my earlier review of http://supportforums.blackberry.com/t5/Testing-and-Deployment/BlackBerry-10-Code-Signing-Guide-for-C... is incorrect - the last article of this is correct for the old keys. you don't need to do anything else.

• result::failure-103

  I'm trying to deploy my signed. BAR asks my BlackBerry PlayBook, but whenever I try, I get this error odd result::failure-103

  Here are the steps that I did:

  first comvert my. APK for BAR

  ./apk2bar [path to my apk folder] ~/android-sdks/  -t [path to output folder] -rv
  

  can I sign

  ./blackberry-signer -verbose -cskpass [password] -keystore author.p12 -storepass [password] [path to my .bar] RDK author
  

  Then I check it out:

  ./blackberry-signer -verify -verbose [path to the .BAR]
  

  and here is the result I get:

  1342 Thu Nov 22 23:25:04 EST 2012 META-INF/MANIFEST.MF
           608 Thu Nov 22 23:25:04 EST 2012 META-INF/AUTHOR.SF
           601 Thu Nov 22 23:25:04 EST 2012 META-INF/AUTHOR.EC
           608 Thu Nov 22 23:25:04 EST 2012 META-INF/RDK.SF
           280 Thu Nov 22 23:25:04 EST 2012 META-INF/RDK.EC
  sm      7600 Thu Nov 22 23:24:16 EST 2012 android/res/drawable-mdpi/icon.png
  sm    169511 Thu Nov 22 23:24:16 EST 2012 android/Chmbrs-NotePadBB.apk
  
    s = signature was verified
    m = entry is listed in manifest
    k = at least one certificate was found in keystore
    i = at least one certificate was found in identity scope
  
  Info: Bar verified.
  

  After that, all right.

  Finally, I push the file to my PlayBook

  ./blackberry-deploy -installApp -device 192.168.1.109 -package [path to the .BAR] -password [Playbook password]
  

  but it is there, it breaks down and I get this result

  Info: Sending request: Install
  Info: Action: Install
  Info: File size: 133672
  Info: Installing ...
  Info: Processing 133672 bytes
  Info: Progress 50%...
  Info: Progress 100%...
  actual_dname::com.chmbrs.apps.notepad.gYABgOwP1jrtFP9mlr5GwQ_xwlw
  actual_id::gYABgOwP1jrtFP9mlr5GwQ_xwlw
  actual_version::1.0.5.0
  result::failure -103
  

  I can see the application installed in the PlayBook, but when I try to pen I get a window asking me to approve certain permissions. I accept and then I see a black window and the application closes itself. She does this all the time.

  I have installed jdk Oracle version 1.6.0_33 and I use Ubuntu 12.10. That shouldn't matter however, as according to the tool my. BAR is signed and without errors.

  Any ideas why does not? I would not use Eclipse because with the last update ADT plugin for BlackBerry is broken and does not not even under windows.

  Thanks for the help.

  Yes! you were right! It seems that you must sign the. APK before you pack up and send to your playbook for installation. I followed these steps and it worked:

  Navigate to your folder root of android project and build your project for immediate release

  ant clean
  and release
  

  Connect to your Playbook:

  ./blackberry-connect [playbook IP] -password [playbook password] -sshPublicKey [key].pub
  

  Sign your APK with your keys:

  jarsigner -verbose -sigalg MD5withRSA -digestalg SHA1 -keystore [your key].kestore [your app name].apk [alias]
  
  --verify your signed apk
  
  jarsigner -verify bin/NoteList-release-unsigned.apk
  

  If it passes, you can now create the file of the bar

  ./apk2bar [path to your APK folder] [path to android dsk folder]  -t [path to output folder] -rv
  

  Sign the file BAR

  ./blackberry-signer -verbose -cskpass [password] -keystore [path to your certificate].p12 -storepass [certificate password] [path to your BAR file] RDK author
  
  -- to verify the signed BAR
  ./blackberry-signer -verify -verbose [path to your BAR file]
  

  And finally sending to your Playbook

  ./blackberry-deploy -installApp -device [playbook IP] -package [path to your BAR file] -password [playbook password]
  

  I tried these steps using Ubuntu 12.10 and beta CommandLineTools_1.3. Don't forget to turn the development WE we you playbook and turn on SSH access so you can use blackberry connect. In addition, when you download the command line tools you must give approval to run for all scripts.

  Hope that this helps some development on Ubuntu, until the BlackBerry fixes the plugin for eclipse which is broken with the last tools rev 21 ADT.

  Happy coding!

• Adobe still CS6 - Premiere Pro sequences import does not work

  Using the dynamic link feature in the still I am trying to import some sequences within a project of first Pro CC 2015.3.

  A window opens and it begins to examine the record of the project for the sequences and a little yellow progress bar starts, gets a small path along the bar and stops permanently.

  I can't figure a way around this except sequences to export video files to import then which is the long way around?

  Someone at - it somehow around him?

  Thank you

  Dave

  Dynamic Link does not work between the different versions, you must export a video DVD or BluRay proper on PProCC and then import the files in yet for the creation of

• Swf loader help

  Hello all, I use Flash CS4 with AS3.

  
  I have a problem with the preloader site. When I simulate the load it is 'invisible' for awhile and then appear from loading of ~ 24-27% or perhaps ~ 55%
  To resolve this problem some people suggested to create a loader.swf (where you want to preload) and the site.swf: when the loader.swf have loaded the site.swf then it appear.

  
  Well, I tried this with the following code:

  var file:Loader=new Loader();
  var: path string.
  load.bar.scaleX = 0;
  
  run the preLoader (event: Event): void {}
  If (file.contentLoaderInfo.bytesTotal! = 0)
  {
  load.bar.scaleX = (file.contentLoaderInfo.bytesLoaded / file.contentLoaderInfo.bytesTotal);
  Load.txt_perc. Text = String (Math.round ((file.contentLoaderInfo.bytesLoaded/file.contentLoad erInfo.bytesTotal)*100))+"%";))
  }
  trace (file.contentLoaderInfo.bytesLoaded);
  }
  
  function stopLoader (event: Event): void {}
  trace ("Downloaded");
  file.removeEventListener (Event.ENTER_FRAME, preLoader);
  load.bar.scaleX = 0;
  Load.txt_perc. Text ="";
  }
  
  file.contentLoaderInfo.addEventListener (Event.COMPLETE, stopLoader);
  
  function loadMovie (): void {}
  load.bar.scaleX = 0;
  var swf:URLRequest = new URLRequest (path);
  leader. Load (SWF);
  file.addEventListener (Event.ENTER_FRAME, preLoader);
  stage.addChild (file);
  }
  
  function path1(e:Event):void {}
  path = "example.swf";
  loadMovie();
  }
  
  stage.addEventListener (Event.ENTER_FRAME, path1);

  
  But he returns this error:

  #2044 error: Unhandled IOErrorEvent:. Text = #2036 Error: incomplete loading.

  
  Someone told me that this error is due to the impossibility to find the URL of the swf file, but this is false since the swf file is finished.

  If I look at the load simulation I see multiple copies of the swf file are "loaded", but nobody is 100%.

  However, I said "responsible" because if I put a trace (file.contentLoaderInfo.bytesLoaded); I see a 0 permanent.

  
  Please help me I'm going crazy!

  where did,

  removeChild (file);

  come from?   which removes your swf loaded from the display list.  remove this line of code.

• Cannot get path bar to display in the Finder in El Capitan

  I can't get the path bar to display in the Finder in El Capitan.  When I look in the view menu, the 'bar Hide path' option is grayed out (not adjustable).  What is the cause?

  Thank you!

  Click on your Finder window to make it more current, and display the menu items become active. Select Show path bar.

• When searching from a finder window, why are there no visible file path bar? Is where you enter something in the search engine.

  When searching for a finder window why don't the path bar of file at the bottom of the window disappears. Y at - it anyway to stay visible.

  Of course, I would like to know where the file or folder is where spotlight shows its conclusions. Is there a preference I need to change to make the default action to be one in which the path to the file still appears at the bottom of the finder window?

  Sorry, I discovered my problem. I didn't have a file selected in the list. As soon as I made the path to the file appears. Duh!

• Show the folder path in the title bar of Windows Explorer

  How can I show the folder path in the title bar of Windows Explorer? I tried to switch to Classic view and check the "display full path" option under "Folder Options", but that did not work.
  If there are no built in parameter to do this, anyone know of a good third-party plugin that will accomplish this?

  Heh, after playing with my Google in terms of search, I found the answer to my own question!
  There's a small utility called Aerobar that you can download here. It puts the full folder path in the title bar of Solution Explorer.

• Is there a quick way to copy a path of file to widows Explorer address bar to an e-mail as a hyperlink?

  I can copy a folder path and paste it into an e-mail on outlook. However, it is as text and not as a hypertext link, is there a way to quickly copy as a hyperlink. without the right click on the text, the hyperlink and him then browse through the files to create a new hyperlink.

  It should work the same way.  If the folder is on a network drive on the server, you can click in the address bar to copy/paste.

  It's in your e-mail program to see if this link becomes "clickable" or not, but even if they don't click, the recipient of the e-mail can just copy and paste the link.
  • Tip: You can also hold SHIFT while you right-click on any file or folder, and the shortcut menu displays a "Copy as path" option secret.  After you-as-path of the copy, you can paste it into your email application.
  • Extra tip: Microsoft Office (work, Excel, Outlook) can convert paths in links, but only if the path starts with \\something or http://something.  If the route uses a drive letter (for example, W:\Something) he did not become a link, because the recipient of the email may not have that same drive letter (or it could be a totally different player with the same letter.
  • Extra Bonus tip: If the path contains a space in there, type in quotes.  After you type the final quote and press space, converted to a clickable link and even automatically remove the quotes.  For example, type this into an Outlook email, quotes included, and then press the SPACEBAR:

    "file \\server\folder\some with spaces.doc name.

  Enjoy!

• Windows 7 Search doesn't show the directory path in the address bar

  I have Windows 7 64 bit. When I do a search, the directory path does not show in the address bar. How can I fix this? Thanks in advance.

  Justin

  This is how does the search on the start menu. If you want to see the details of the location, you need start looking for an Explorer window or click on "See more results" just above the search box to open your current search in Explorer.

  In the Explorer search results, make sure that you use the details view and then you'll be able to see the path in the column 'folder '.

• How to see the file name of the document with the full path when you move mouse title bar?

  PS CS6 using, Windows 7 x 64.

  I was under the impression that when my mouse hovering over the title bar of the document, I would see a ToolTip showing the full file name, including the path.  This isn't the case and I wonder if there is a way to do it.  I know that I can click on file > save as, or Ctrl-Shift - S to see the full path, but hoving over the title bar would be easier.  (What I now see in the ToolTip is the name of the file, % magnification and layer that I selected.)  Basically, the ToolTip is showing just what is in the title without hovering bar.)

  Thank you!

  John

  AHA, I think it's a view tabbed vs thing windowed mode...

  

  I do not think that trying to change the way you manage your documents, well that--most people like one way or the other and stick with it.

  -Christmas

• How to enter a full path in the path bar?

  Hi guys,.

  I have a very simple question: it is possible to enter a full path (something like C:/MyDoc/Images/subfolder/picture) directly in the path bar as you can do it in Windows Explorer, or what I have to click to this place each time again?

  Thanks in advance!

  Nicky

  CS5 and 6 (I don't know anything earlier), if you click the path ther bar *, it turns a graphic in a field of type address-bar to directly enter a path. Is that what you mean?

  * The thing that looks like the desktop computer > computer > Windows (c) etc.