Duplication of the Guides at the duplication of work plans

Similar Questions

• Problems with the functionality of work plan...

  I have trouble getting the right size of the image when I export my work. After that I put my the artboard size, I export the image in Dreamweaver. When the image in dreamweaver, the "cropped" portions of the image are still there. Basically, the height and width of the image, I work with Illustrator is on 3 "x 4", but I only want displayed to 2 in. x 3 and didn't seem to do it with the tool of work plan.

  If you use save for web, make sure that "clip for work plan" is checked under the tab size of the image.

• Problems with the edition of work plans

  I did not have a good experience. I can't even change my plans of work, they get stuck off the coast to the right or left and I can't scroll right or left to get them to a place where I can zoom in on the map of the art of making changes. The screen of UI zooms only the Board of the art that is visible on the screen at the same time. Also when adding graphics to images or work plans I can't select them at all.

  You should be able to use two fingers on the touchpad to the panorama of the view in XD, similar to how you would scroll/pan in other applications on your Mac.  Please let us know if this doesn't work for you.

• Is it possible to export the layers of work plans?

  I was so happy when Adobe introduced plans to work in Photoshop. And was impatient to try it on the practice. And earlier I finished Web site design that has by page 3 work plans. And a lot of layer comps on every page.

  And it turned into a nightmare...

  I can't export all the layers automatically. I have to manually put in each layer comp, click on "export as...". ». In the same file names are the same (called as a work plan). So I have to rename the exported images before the switch then layer comp and export it.

  If I use the command "export > Layer Comps to files...". ', it exports all work plans in 1 file for each layer comp. But the worst thing is that these files look like this:

  -with huge space empty around work plans.

  I spent a lot of time designing the site and now I even can't show the client!

  So my question is:

  Is there a way to export the layers of each work separately plan with corresponding file names? (as it works for the old "Layer Comps to files... ("without work plans).

  But if there is no solution I think it's a major issue in usability.

  Thank you in advance for your help!

  If nothing else arises perhaps you should ask for help on to

  Photoshop scripts

• How to disable the function of work plan in Photoshop

  Hello world! My name is Arthur,

  and I'm not trying to disable the functionality of the artboard. I can't find a way to do it. Could you help me to stop the plans of work?

  Thank you

  Yep select all your layers in the layers panel and place them above the artboard, and then select the work plan and click on delete.

• Why is the tool of work plan is not in Photoshop after update Creative Cloud 2015?

  I recently installed upgrading 2015, however, the work plan tool does not appear on the left side under the move tool. I tried logout and return signature.

  Hi CCriminger,

  Make sure you open Photoshop 2015 CC, and CC 2014?

  Are you long - by clicking the move tool?

  Or Option/Alt click on the move tool to move through them?

  Let us know if this helps

  Concerning

  Pete

• How can I change the order of the pages of work plans in Illustrator CS6?

  How can I change the order of pages / print order of artboards in Illustrator CS6? I know that it was negligence in this regard griped in previous versions, once work plans have been introduced, but surely, it's been fixed now. It is only fair that I can't understand how do. It is not intuitive by any means.

  Open the Panel work plans (in the window menu) and drag work here plans to change the order. When the work plan tool is the current tool, selection of a plan of work in the work plans Panel will highlight the workplan in the workspace.  The first column in the work plans Panel indicates a number representing the page / print order. The second column is the name given by the Illustrator which you can change in the Control Panel, while the artboard tool is selected.

• Photoshop CC 2015: Guide separate models for different work plans?

  Hi all
  

  
  

  I've recently updated to CC2015 and I am trying to use the new functionality of the artboard. It looks great, but I did not find an answer to this question:

  
  

  Is it possible to create models of separate guide for the different work plans in one document?

  For example: I have a work plan for a presentation of Fund, one for the mobile layout in a single file . On the arrangement of office, I wish I had a guide of 12 columns layout, on the mobile artboard a 6-column layout guide. Is it possible to create these guides through "new guide layout... '. » ? When I tried, Photoshop took all work as one plans and created the guides on all of them...

  
  

  Thanks a lot for your help!

  
  

  See you soon...

  Hello

  This initial version of work plans in 2015 Ps includes only guides to the document level. We are actively working to address some of the issues you mention. We know that many people rely on guides, but also we wanted to not resisted publication of the plans of work for those who could use them as they are currently implemented. But guides improvements are very, very high on our backlog of work for work plans, so stay tuned!

• Retrieve the reference of work plan of the nested active layer

  Hello

  I'm looking for a way to get the referral of artboard to a nested in layer. I was looking around, but I'm still quite confused on how to proceed.

  Any help much appreciated!

  Thank you

  I don't know, but maybe this will help you...

  var doc = activeDocument,
      currentArtboard = getActiveArtboard();
  
  /* ======================== */
  alert(currentArtboard);
  /* ======================== */
  
  function getActiveArtboard() {
      while (true) {
          if (isArtboardLayer()) {
              return doc.activeLayer
          }
          selectForwardLayer();
      }
  }
  
  function isArtboardLayer() {
      var ref = new ActionReference();
      ref.putEnumerated(charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt"));
      var isArtboardLayer = executeActionGet(ref).getBoolean(stringIDToTypeID("artboardEnabled"));
      return isArtboardLayer
  }
  
  function selectForwardLayer() {
      var desc = new ActionDescriptor();
      var ref = new ActionReference();
      ref.putEnumerated(charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Frwr'));
      desc.putReference(charIDToTypeID('null'), ref);
      desc.putBoolean(charIDToTypeID('MkVs'), false);
      executeAction(charIDToTypeID('slct'), desc, DialogModes.NO);
  }
  

• Is there a way to remove the guides inbetween work plans?

  For example, I have a series of guides on all 10 horizontal work plans. I need two more in a vertical format, but all the guides on the horizontal lead.

  Thank you!

  Thank you all!

  I must of not been clear in my question, I want to say was is there a way to keep the guides for some plans of work and remove the guides where I don't want them.

  However, I found the answer to my question. I just create guides for the artboard itself which does not cross the limits of the artboard. Simply clicking the artboard and the drug guide.

  Hope that makes sense for those who want else knows how to do (other than objects, and then creating) guides for a work plan.

  My problem was to have several arboard forms crossing in the guides of other work plans.

  Thank you!

• Illustrator is the addition of extra pixels to copied work plans

  Hello

  I do web design prototyping. I designed my homepage at size 1024 x 768 and then copied the artboard to create excessive state of the menu. I continue to copy the work plan for my homepage until I got 8 copies to edit with different contents. Each of them reported size 1024 x 768 in illustatror.

  

  The problem started when I exported JPEG individual work plans and my first work plan (home) was 1024 x 768; While the rest of the copies (who said to be this same size inside the Illustrator) is 1025 x 768 pixels. The small movement caused by this extra pixel is sometimes seen as I program the hot HTML.

  

  (JPEG-work plan home original vs home State too JPEG copied from the original)

  Please I need help, I tried everything and nothing seems to work. There is nothing outside the area of work plan and guides are out of service, as well as the presentation layer is disabled or deleted, nothing works.

  Please, I beg you! Help!

  If you double-click the work plan tool to display the artboard options, you will probably see fractions for the X Y coordinates.

  Make sure that it didn't there ar no value fractional pixel before exporting, the artboard and the position of art

• Command of the keyboard to switch between work plans?

  I was unable to find a shortcut - or a menu/button option - to change the display between work plans (like turning pages in InDesign). If there is not one, I hope it's in the works for the next update. Double click right on the artboard in the layers panel displays its parameters and Ctrl + 0 by default to "adapt (all work plans) on the screen.

  So far my solution is to Ctrl + 0 to 'hold the artboard on screen. ' I can, click once on a work plan in the layer panel, then press the shortcut and it will be re-center/size on the newly selected artboard. But this involves several steps and you may need to scroll down in the layer panel. A simple 'page' high-low shortcut would be nice.

  Thanks to all the people who have comments!

  -Ryan

  What a great question, but no, we don't have navigation plan work in Photoshop as we do in Illustrator, or page navigation as in InDesign. You can put in your request here: feature request/Bug Report Form .

• How get rid you of the "work Plan" and just opened a "Document?

  I am trying to open a new blank document, but the resulting page has the little word 'Work Plan' in the upper left corner on the page. I don't know what a work plan is not something perhaps in Illustrator. I wanted not a "work plan" and even spelling wants to force me to put "target".

  If someone could tell me how and why I'm getting this and help me a little to open a Photoshop Document clear, white, new, I would be so grateful. If you want to tell me briefly what is a 'work plan' and knowing I don't want one and probably never employeront such a thing...

  TIA,

  Ken

  File/new

  When you get the screen of characteristics of the document (paper size, etc.), search for "Type of Document" and select what you want.

  

• Creation of work plans that begin in the upper left corner of the canvas

  Hello world.

  
  I was wondering if it is possible...

  I would like to create a series of work plans that begin in the upper left corner of my canvas. Right now, all arboards are created the dead center.

  I can't find an option for this, but is there a way to do it without having to move manually work plans that I create? It's a lot of time if I want to do a lot at once.

  Thank you
  B.

  Not sure that I understand you exactly, but considering what you want to avoid this

  

  If you suggest to use the tool of work plan to move the original page here

  

  Then, when you duplicate drop target for darts you will get more

  

  You did a good job, explain in words, but screenshots can really help others for instance, you understand, do not hesitate to use the camera tool

• Layer mask groups converted from work plans to the size of the artboard in older versions of Photoshop

  I wanted to start this post as an idea, but I couldn't choose communities (it wouldn't let me), so here it is posted...

  ----

  Just came across this with a customer...

  I use for a mobile design project work plans, and I just got a screenshot with some texts asking why among work plans were really great. Way bigger than a phone. (I'm under NDA and cannot post the screenshot, but imagine there are a lot of iPhone size work plans and two of them seem to be at a right angle)

  I opened the file and on my end, everything is the right size. Remembering the weeks ago to tell the customer that they need to update their version of Photoshop for all this work correctly, I have take a look at the screenshot and see that they are on CC2014 - none of the work plans.

  What I'm asking here, is that, since we have data, plans of work are objects of a defined size and 'alive', why not just use these data to hide layer groups at the opening of the PSD / PSB (PSB in my case) in older versions of Photoshop?

  It could save you a TON of hassle and confusion.

  Hi Zack,

  High level to your query response is: no, there is no conduct business case for a general solution to what you are suggesting. So I don't see what is happening.

  I say that as someone who likes to give back and forth and backward compatibility.

  There are two parts of the problem that you raise. They are related and somewhat intertwined.

  1. Having the version previous (2014) do something reasonable with the data from the version the most recent (2015). Either the old version should be taught on the most recent data so it can make a decision about what to do, or the newer version must put additional data in the file format for consumption by the older version.
  2. Back and forth between versions. As you say, a much more difficult problem. In fact, we do a good job of that today. But we must be sure that whatever we do for (1) not to damage and back the wrong way.

  Let's be very clear: 2014 will not be touched, except for critical bugs, absolutely. And even before 2015 is released, it would have not been corrected to make it behave better with work plans. There is no way that I could see what is happening. So all we have done for better backward compatibility had to be entirely done within 2015.

  For the round trip, the general problem is something like this: we want to 2014 to read an object that has properties of 2015, he does not understand. While we might learn ch to keep these properties as opaque property, must also have rules for when these properties are not valid and thrown on the floor. Probably, if the object is changed. But not always. And sometimes when another object parent is changed. And so on. Right now, we destroy them unknown content from their reading in the old version. Make us and record what we understand. As a user, you receive an alert telling you that we are do this. It's the safest thing to do.

  There are special cases where a developer can see an opportunity to preserve a level of backward compatibility and back and forth. We try to do if we believe that it is safe. But this scenario happens only occasionally.

  In the case of work plans, made us really think about this: If we added a mask to the group for backward compatibility, it should do something with this mask reading around 2015. And what would happen if the user edited this mask in 2014 and opened upward in 2015 - and who edited mask do not align with the structures of the artboard? Things started to get dark quickly. We started to see traps. The workflow together to sheath special round trip had to be tested and verified. The cost was rising and this expense must be filtered through a cost/value trade-off. And then what happens when we add a new property to the structure of work plan? At these efforts for nothing?

  So we compromised with what you have today. Work plans become groups in 2014. The Group and the layer structure remains intact. Doesn't secretly add us and remove masks for the round trip. You can safely change the groups to your heart's content. When return you this document in 2015, you redo the work plans of the groups. Was not clear and safe way to do more than that given the time that we had.

  Take a step back and think about your problem, it doesn't seem to be a value to a script that converts group work plans + layer masks for your workflow to have your documents that is consumed by the customers of 2014. This would be carried out in 2015 because she would need understand the work plans. And maybe vice versa from 2014 to 2015, assuming that the documents were not published in a hostile way. We're not likely to write such a script as a generic tool, but someone competent with script might be able to do this.

  More that I intend to write, but hopefully, it gives you additional insight in the compromises that we have faced.