Duration of slide within the slide display

Similar Questions

• WHY? -help please -: "just a reminder that we need to check that your membership is activated. You have access to Adobe first CC in offline mode, but if you do not connect to the Adobe server within the time displayed, your product will stop working.

  It continues to be. I have same troubleshooted with an adobe employee... but it keeps popping up. I tried disconnecting and then back into creative cloud - but that doesn't help either.

  Why the first can not access the server?

  What I am doing wrong?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Change the time for all slides display?

  Captivate 6, is there a way to say, "all the slides in this simulation of software have a display time of 3 seconds.  Change them all to 4? »

  Please tell me that I don't have to change the time individually for each slide display...

  Thank you

  JK

  It is very easy to do before the capture preferences, default, slide Defaults, duration of slide.

  But it's too late. No panic please don't try this way:

  1. Select all of the slides in the film (CTRL-A after selecting a slide)
  2. Change the length of time in general, just below the quality parameters.

  Lilybiri

• Using ListView with ArrayDataModel displays only the first element in each QVariantMap within the matrix

  I have this QML who have a ListView with datasource to a full ArrayDataModel from the CPP file for creationcompleted, I loop in the table to add the hour together to appear as a label on the page, what works. However, when I want to view these items in the list, it will display only the first element of the QVariantMap within the table, no error on the log of the device. Also, triggered more does not work, but when I click it, it will have a blue border surrounding it, but the onTriggered does not fire.

  Here is an excerpt of the CPP on the table fill

  This-> eventsModel = new ArrayDataModel();

  QVariantMap event;

  event ['EventName'] = "Event1";

  event ["EventHour"] = "00";

  event ["EventMinute"] = "01";

  event ["EventSecond"] = '02 ";

  QML-> setContextProperty ("eventsModel", it-> eventsModel);

  Here's the QML

  {Of container

  ID: eventListContainer

  {To ListView

  ID: eventList

  dataModel: eventsModel

  Use a ListItemComponent to customize the appearance of the list view

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {StandardListItem}

  Title: 'Event' + ListItemData.EventName;

  Description: "time:" + ListItemData.EventHour + ":" + ListItemData.EventMinute + ":" + ListItemData.EventSecond; "»

  }

  }

  ]

  onTriggered: {}

  var selectedEvent = dataModel.data (row);

  var eventDetailPage = eventDetailDefinition.createObject ();

  eventDetailPage.txtEventName.text = selectedEvent ['EventName'];

  eventDetailPage.pickEventTime.value = picker.dateFromTime(selectedEvent["EventHour"]+":"+selectedEvent["EventMinute"]+":"+selectedEvent["EventSecond"]);

  eventDetailPage.open ();

  }

  }

  Any help would be appreciated.

  Thank you.

  ListView determines ItemType of the element by calling the function itemType of the dataModel. By default, an ArrayDataModel returns an empty string for this call (see https://developer.blackberry.com/cascades/reference/bb__cascades__arraydatamodel.html).

  This leaves you with a few options:

  (1) If you have no header and all the elements are the same, you can make

  ListItemComponent {
       type: ""
       ...
  

  (2) If you have headers or different elements, you can extend ArrayDataModel and implement your own function of itemType

  (3) you can define a function of ItemType on your ListView in QML. Documentation:

  ListView called DataModel::itemType() for each item in order to know the type. QML, this can be overridden by declaring the itemType function (data, row) on the ListView element. ListView then call this function instead of the function DataModel.

  Here's how to create a list in QML which creates a header for all items on the high level and aStandardListItem for each item below the top level:

• Is there something within the Muse (or a known widget) that allows an image to display at one time?

  Is there something within the Muse (or a known widget), which allows images to be displayed at certain times throughout the day?  Photo Planner?

  You can try this custom workaround:

  http://www.javascriptkit.com/javatutors/TIME2.shtml

  http://www.WikiHow.com/display-time-in-HTML

  Thank you

  Sanjit

• Introductory statement; When the hit play button, I want the presenter display appears?

  I have Keynote 6.6.  I created my view presenter on how I want to get my presentation on a projector (not yet hooked).  I guess that when I'm ready to present, I hit the play button in the toolbar.  When I do, he'll just in playback mode.  I want to see the "presenter" display that shows my notes, etc., but I have not, it will just in this game mode.  When I, for example, press on repeat slide show, it works fine.  What I am doing wrong?  Would it because I have to be plugged into the projector or I'm doing something else wrong?  Thank you.

  (I'm on Mac 10.11 upgraded to Yosemite)

  with the projector connected;

  1. Disable mirroring in: System Preferences > displays
  2. Keynote preferences > slide show: Select to: enable presenter view

  Repeat slideshow displays the screen of the presenter to allow the in place the presenter tools

  When in the game, view a second (the projector) must be connected to enable the display of the screen of the presenter.

• The number of digits on the digital display of cursor

  I have a slider control with a display of %.1f format that works well for the scale. On the appearance tab, I checked the digital displays, see the. This view seems to have no formatting control. I tried to adjust the size, but it adjusts not perfectly, either too many numbers or partial numbers. Can it not be controlled except by creating my own indicator?

  Also, I would like to know the difference between digital and digital display on the tab of display format.

  Thank you

  JVH

  Move the cursor to properties-> display Format. And where it says 'Digital' choose digital display. Then you can format.

  jvh75021 wrote:

  Also, I would like to know the difference between digital and digital display on the tab of display format.

  Thank you

  JVH

  It seems that you know the answer yourself.

  'Digital' formats the numbers of legend of the balance. 'Digital' formats the digital display.

• Can't see my cursor beyond this page within the MSA forums

  My slider works very well on this page, but is MIA when I post to a form any within the MSA. I use Win XP with Firefox, which is supposed to be supported. 1 G of RAM, Pentium 4 processor,

  Self-correction after cache cleaning via CCleaner.

• definition of text within the specific Web div object

  Hello!  I am trying to find a way to take the text of a text caption and assign it to a specific div inside a Web object.

  I tested it with a site regular html with embedded iframe and it works fine, but with Captivate, I can't get the text to a web object.

  The WebObject is named CC_box and inside, there is a div tag with an id of 'text' - this is where the text should go.  The text caption containing the text is named CC_source_1 for the first slide, then CC_source_2 for the next, etc.

  Here is my code:

  var slideNumber = window.cpAPIInterface.getCurrentSlideIndex ();                                Gets the number of the current slide

  var ccText = document.getElementById("CC_source_"_+_slideNumber).textContent;     Retrieves the text of a legend of text on a page in progress - works fine

  $("#CC_box).contents ().find("#text").html (ccText);                                                          This line of code works perfectly in HTML, but not in Captivate

  What is a good way to access this div within the web object of Captivate?

  Thank you!

  Thank you, I'll try that!

  in the meantime I kept trying different things here and found that if I go 'deeper' and call iframe directly as opposed to a container div, everything works, so in this case the following worked:

  $("#myFrame_CC_boxc").contents ().find("#text").html (ccText);

  Interestingly, Captivate attached a 'c' at the end of the name of the div, so even if I named the CC_box of Web object, we call it actually CC_boxc if you look in the DOM Explorer

• See the playback bar only after all the captions display?

  I'm trying to understand how I want my users to navigate, and thanks to the response of lilybiri on conditional actions, I am able to make the play bar jump up if users hit different buttons - thank you again.

  But here's what I don't know now.  I have another slide in which I want to have all the text and captions arrive on schedule (which follows the narration), but then not the pop play bar until all these were posted.

  In others, I understand the conditional action that will show the playback bar, but here I have nothing to attach a conditional action too.  I just want the PlayBar appears at the end of say 30 seconds, and let the user decide when they progress, but don't let them move forward before the entire displayed page.

  Note: The slide automatically suspended because I have a button that appears and allows them to view additional content, but I don't want that it is a mandatory button before seeing the play bar (if it is required, then I could use it as the action of condtional to shw the PlayBar)

  You need an event to trigger a tip action, and calendar is not an event.

  Why not to create another identical slide and have the playhead to move to this slide, after the first slide (with a chronology of 30secs) is over?

  Lilybiri

• PL/SQL - using procedure within the definition of the cursor parameters.

  Hi all
  
  I am currently working on a procedure which has a cursor inside. The only parameter passed when his appeal is a table name (TABLE_NAME parameter) that I want to use as a string in a LIKE comparison within the defined cursor.
  
  Here is the code:
  

  PROCEDURE PURGE (TABLE_NAME IN VARCHAR) 
      IS
          CURSOR TABLES_CUR 
          IS 
              SELECT 
                  OBJECT_NAME 
              FROM 
                  SYS.DBA_OBJECTS 
              WHERE 
                  OWNER = 'MYSCHEMA'
                  AND OBJECT_TYPE = 'TABLE'
                  AND OBJECT_NAME like 'TABLE_NAME_%'
                  AND CREATED = sysdate-3;
          TABLE_DEL TABLES_CUR%rowtype;
      BEGIN
          OPEN TABLES_CUR;
          LOOP
              FETCH TABLES_CUR INTO TABLE_DEL;
              EXIT WHEN TABLES_CUR%NOTFOUND;
              DBMS_OUTPUT.PUT_LINE('TABLE_DEL');
          END LOOP;
          CLOSE TABLES_CUR;
      END PURGE;

  However the TABLE_NAME parameter value is not being interpolated, this slider will eventually return nothing.
  
  What should I do to get interpolated and not interpreted as a literal string?
  
  Thanks in advance.
  Frank.

  OBJECT_NAME like your_parameter||'%'
  

• The table display looks faded

  I use a table on the façade as an indicator to display rows of data periodically on average.

  The color table is washed out and I can't change them.  I don't speak of cells; I mean the line bar and scroll border.

  There must be a way to get a table to display them with decent contrast.

  Any ideas.

  Post your real VI and not just a partial screenshot that does not look as if it were even a part of LabVIEW.

  How did you create this?  Is it possible that you have changed some colors of fonts within the façade?  Anything you might have done in the Windows system settings?

  In fact, I think you just need to check the properties of the table, according to me, it looks like you have set it to disabled and Greyed.

• The multi display a line of text in the list or the selector?

  Hi guys,.

  Is it possible to display several lines in lists of QNX?

  When I try to add a newline '\n' in the string, it gets shows ever, even when I try to increase rowHeight.

  Any help would be appreciated.

  Thank you.

  Oddly enough, I was able to do this... but not in front of my computer to dev

  Thanks dropbox!

  Try the following for your cellRenderer class

  package
  {
      import flash.text.TextFieldAutoSize;
  
      import qnx.ui.listClasses.AlternatingCellRenderer;
  
      public class rssCellRenderer extends AlternatingCellRenderer
      {
          public function rssCellRenderer()
          {
              super();
          }
          override protected function onAdded():void
          {
              super.onAdded();
              this.label.autoSize = TextFieldAutoSize.LEFT;
              this.label.wordWrap = true;
              if (this.label.textWidth > this.width)
              {
                  var charPerPixel:Number = this.label.text.length / this.label.textWidth;
  
                  var charMax:int = Math.floor(charPerPixel * this.width) - 3;
  
                  this.label.text = this.label.text.substr(0,charMax) + "...";
              }
  
          }
      }
  }
  

  It is not perfect, but I use it when grabbing RSS feeds (because they tend to be multliline). This helps to keep the titles within the area (the best he can, it always tends to overflow if there is a lot of text). If all goes well it gives you a starting point well!

• Model of ADF for use within the declarative component project

  Hello

  JDev 11.1.2.4

  I created a project for my declarative components. I want to create an element with an attribute of type oracle.jbo.Row, but this class is not recognized. What are the libraries I need to include if I want to use the object Row.

  Some basic information: my declarative component is bound to a managed bean.

  Import oracle.jbo.Row;

  @ManagedBean (name = "audit")

  @RequestScoped

  public class AuditBean {}

  Online Privacy;

  public AuditBean() {}

  Var UIXDeclarativeComponent = (UIXDeclarativeComponent) JSFUtils.resolveExpression("#{comp}");

  If (vars == null) {}

  again, throw PropertyNotFoundException ("could not find the name of the attribute [comp] component declarative Vars.");

  }

  line = vars.getAttributes () .get ("row");

  }

  }

  Most of our table have the same fields of audit, and we want to create a component that displays audit information. The component would take the line and check if the attributes are present, if so, display them.

  Thank you

  Hello

  Line belongs to the ADF runtime library. However, your declarative component seems to have another flaw, that is, it uses a bean managed within the scope of the request. She should better use backingBean range (a range of task flow) so it can be used multiple times on a page without the substitution of a previous rendering information. Maybe this isn't a problem if the component cannot forget his condition after rendering

  Frank

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.