Model of ADF for use within the declarative component project

Similar Questions

• What RHEL drivers for use within the ESX 3.5 console?

  Hi all.

  I need to update the drivers, firmware, etc. on my Dell Power Edge server.

  At the time until we implemented ESX, I just downloaded the Windows thing and does the job, but now, it's not quite that simple.

  Which version of Red Hat Enterprise Linux (assuming that it is not SuSE) should I download drivers, etc on my Dell my system ESX Server?

  Dell server: PE2900 (I'm OK here; I know where to find the downloads)

  ESX version: 3.5 with no post - 3.5 updated again (after that I updated the server to come)

  Options: RHEL 3, RHEL 4, RHEL 4.5 and RHEL 5

  Thank you.

  Steven

  :,_`:`.:,_`:`.:,_`:`.:,_`:`.:,_`:`.:,_`:`.:,~`:

  Thank you for your kindness and patience that I continue this adventure in the world of virtualization.

  The bullies don't need not answer

  Hello

  Thank you, but I heard the case of VMware in the past.

  For drivers? I am very surprised and doubtful that it is what they meant. However, Dell OpenManage can be, if it of good and done as directed by Dell for VMware ESX.

  I would check that whether in VMware said that to ensure that they spoke drivers/RPM and not just the BIOS/Firmware.

  They recommended that I have specifically install all updates (drivers, firmware, etc.) for my Dell server.

  Firmware and BIOS absolutely. No drivers or RPM... Drivers or RPM will overwrite files of GNU/Linux management appliance and put you in an unknown state.

  I'm looking for the best way to do it, and I landed on the installation stuff planned for RHEL3.

  I would not, you install a new driver within the environment GNU/Linux things might stop working. Remember that the driver in the vmkernel is one that counts.

  Unless someone can show me the 'official' documents of VMware to the contrary, this is my line of conduct at that time.

  Update BIOS and Firmware using a bootable CD/DVD-ROM for this purpose.

  If you install Dell drivers (PMP), then you can end up voiding your warranty, as well as possibly to put your system in an unusable state during the next reboot.

  Warned is worth two.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and other Blogs: http://www.astroarch.com/wiki/index.php/Blog_Roll

• How to use the declarative component without deployed as JAR

  Hi all
  I want to create a reusable component (declarative component) for PanelHeader with default features packed in I want to use in my application. Because this component will be used only in my project, I don't see a use to go through the process of creating a jar and deploying it before using it. Is it possible to use this component without creating a JAR.
  
  Thank you
  -Srini.

  User 895137,

  your welcome to ignore the best practices in the development of the ADF. The declarative elements are deployed in the libraries of the ADF. If you keep the declarative component in the application then project you will have a chance to deploy independent of the application (which means that your ADF library contain more than just the source of the component (which is where your nightmare begins)). Therefore, best practices

  1. create the declarative component in a new project in JDeveloper. Follow

  http://download.Oracle.com/docs/CD/E21764_01/Web.1111/b31973/af_reuse.htm#BABJBFDD

  2. If you don't ant to deploy components in a tag library, use declarative dynamic components (will not deploy-able in many applications, as you mentioned your future plan is), as shown here

  http://download.Oracle.com/docs/CD/E21764_01/apirefs.1111/e12419/tagdoc/af_declarativeComponent.html
  http://download.Oracle.com/docs/CD/E21764_01/apirefs.1111/e12419/tagdoc/af_componentDef.html
  http://download.Oracle.com/docs/CD/E21764_01/apirefs.1111/e12419/tagdoc/af_xmlContent.html

  Frank

• Looking for a compatible printer AirPrint for use in the field to print from my iPad 2. Possess and have v

  Looking for a compatible printer AirPrint for use in the field to print from my iPad 2. Own and use very satisfactory wbt 460 HP with a laptop. All compatible printers AirPrint currently all-in-one and too big for travel or field use.

  Whereas several HP printers are among the 15 AirPrints currently on the market, it seems reasonable that HP could provide the upgrade that would make my 460 AirPrint compatible wbt.

  I wireless (my fi) and would like to buy the wireless card from the blue tooth, if only the upgrade of the driver was available.

  How and when HP can provide a mobile/trip AirPrint printer?

  Answer as I am a person of 70 years. Because I am and can be quickly way over my head!

  For now, we don't have an Airprint-compatible printer. Future products may include, but are not currently. Products that are compatible Airprint are designed this way, so no upgrade will take place for previous models.

• How to set a partialTriggers for the declarative component

  12.1.3 jdev

  I try to set partialTriggers for my component declarative.

  From another forum, people suggested using one different name other than partialTriggers to avoid override a final method in RichDeclarativeComponent.

  Then, I set this:

  < afc:attribute >

  < afc:attribute - name > myPartialTriggers < / afc:attribute - name >

  < afc:attribute - class > java.lang.String [] < / afc:attribute - class >

  < / afc:attribute >

  and

  "< af:selectOneChoice id = simple =" #{attrs.simple "dc_droplist_soc"} "readOnly =" #{attrs.readOnly} "disabled =" #{attrs.disabled} ' "

  value = "#{uploading." "Value}" label = "#{attrs.label}" binding = "#{dropListComp.selectOneChoice}".

  "autoSubmit =" #{attrs.autoSubmit} "required =" #{attrs.required} "visible =" #{attrs.visible} ' "

  valueChangeListener = "#{dropListComp.handleValueChangeListener} '"

  partialTriggers = "#{attrs.myPartialTriggers} ' / >"

  But it does not work. I don't see a partialTriggers work.

  Any suggestions?

  Thank you.

  Hello

  try to use PartialTrigger on the declarative component and then reference it from

  partialTriggers = ' #{uploading. '. PartialTriggers}' / >

  Frank

• My account is not valid for use in the US store?

  I m currently living in the United States but I can not buy certain items in apple store, it's always say that "your account is not valid for use in the US store" (mine is Vietnamese store). Is there anyone know how to solve this problem. Thank you

  If you are currently in the United States, then you must have a credit card US, with an address of billing in the United States, and then you can change for the US store. Without it, you wouldn't be able to change.

• What is the best model of tv to use with the apple tv?

  What is the best model of tv to use with the apple tv

  No matter what TV with an HDMI input and at least 1080 p resolution.

• Any camera regardless of the interface is available for use with the LabView interface.

  Hello

  I intend to go for some CMOS camera,

  but I have a huge doubt before buying, the camera of menttioned above is not anywhere in this list. Nor can I see any type being supported USB device.

  The question is

  1. is a camera regardless of the interface is available for use with the LabView interface?
  2. Can I build a VI to communicate with any device image and recording of camera and take the data?

  Any kind of help or advice is greatly appreciated... I have to buy a CMOS camera and begin to run.

  Thank you...

  Hello Virginia,.

  I am pleased that this information has been useful, one thing I wanted to mention is that USB 3.0 has its own standard USB 3.0 Vision which is currently not supported. If this camera is also Direct Show compatible then you will be able to acquire an image using IMAQdx and manipulate all the attributes that are published to the API Live Show.

  I hope that USB 3.0 Vision will be supported in the near future, and we tentatively announced for this standard of communication for the August 2013 Vision Acquisition Softwareupdate.

  See you soon,.

  -Joel

• Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

  Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

  On Fri, 28 September 2012 18:02:40 + 0000, bertcoy wrote:

  Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

  Looking at the website of Olympus, it would appear that we do not
  There are.

  But you do not need a driver because you do not need to connect your
  camera to the computer. Just put the memory card in a card reader and
  access like this instead. I prefer to do it with my camera,
  because it is easier, faster and uses no battery in the camera.

  Ken Blake, Microsoft MVP

• Adobe may two clouds account for use on the same PC?

  Adobe may two clouds account for use on the same PC?

  Yes, each user must connect (using the cc desktop app) with their own id adobe/pass.

• How to consume the data model library adf for the project?

  Hello
  
  I use Jdev 11.1.1.6.
  
  I have a workspace Jdev containing the business component (entity objects, view and application module objects exposing the your). This workspace is deployed to a library of the ADF. This library is packed with DB connection details.
  
  I have a different workspace Jdev which needs to consume this library of ADF data model. This workspace is actually just the layer view (no business at all components).
  I added the data library ADF model to his draft opinion and it is showing application module and your sub of the data controls.
  
  My question is: how will this project view to connect to DB when running?
  It allows the connection of packaged data model ADF Libabry? If so, how?
  or should I create a business under this workspace view, just the purpose of connection project? If Yes, then what is the use of connections, including creating the library of the ADF?
  
  Thank you
  JAI

  Hello

  It uses the connection in the library of the ADF. However, I recommend that not save you the database connect information in the library of the ADF. Instead:

  -set the ADF BC model to use JDBC data sources
  -In the library of the ADF, configure it to contain only the name of data source
  -In the view project (the workspace) set up the database connection that is exposed by the library

  When the library is imported, verify the Application resources--> connections and right click on the name of the connection that is imported to configure

  Frank

• How to conditionally bind the declarative component custom ADF ADF Faces

  Hi gurus,

  I created the custom declarative component called "Historical Record", following the article of Frank Nimphus Oracle ADF Code corner: How to bind custom declarative ADF Faces components and it works perfectly find.

  But I want to strengthen further to make more generic, as in Oracle EBS we can go to all the blocks and choose Tools-> history of the record and it shows WHO columns to the currently selected record.

  The intention is conditionally bind the attributes of the component with columns of WHO bodies VO.

  The scenario is:

  * all tables have Created_Date, Modified_Date for columns of the WHO.

  * the page containing the 2 instances of VO with different source (for example:-> emp dept)

  * whenever I have navigate dept records it should display columns WHO selected dept and the same thing then to move through the records of the emp.

  Kind regards

  Ferrere

  Well as I said, you shouldn't try to rebuild the Oracle Forms technology-specific behavior in some other technologies such as ADF (because it is not usually possible).

  It is probably best to have a separate button for each shape (square to a coherent position on all pages - as some form, toolbar header...)

  If you want to rebuild the behavior of forms, then you can use the combination of af: clientListener / af:serverListener to set a flag (as the name iterator) see scope that can be used by your 'global' button to retrieve the correct data. Therefore, add af:clientListener to each component entry...

  Dario

• drive not ready message "the drive is not ready for use check the a drive, etc.".

  as soon as I connect my camera to transfer the photo I get following message

  The drive is not ready for use: the door can be opened. Please check the a drive; and make sure that a disk is inserted and that the door is closed.

  I can't get rid of this meaasge if I have to cancel it reappears 10 seconds later it just won't close very boring

  Hello

  What is the number and the model of the computer?

  You have the computer floppy drive?

  Were there any changes made on the computer before the show?

  Follow the steps:

  Method 1:

  Remove all external devices connected to the computer such as printers, scanners and external USB hard drive and check if the problem persists.

  Method 2:

  Check the BIOS setting and also, I suggest you to update the BIOS. To update the BIOS, contact the manufacturer or the manufacturer of the access Web site.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Question about the use of the custom component class define what declarative component

  12.1.3 jdev

  I'm trying to define a declarative component with my custom component class.

  This is the code for my component jsf declarative. I'm trying to use the label on selectManyListbox attribute to pass queryClass for my component class name. It does not work. I also try to use f: attribute to my component class. It does not work too. Question 1: how to move my declarative component attribute to my class of component?

  < af:panelLabelAndMessage label = "#{attrs.displayLabel}" id = "dc_plam1" > "

  < af:switcher id = "dc_s1" defaultFacet = "a lot" facetName = "#{attrs.single eq 'true'?' unique ': 'a lot'}" >

  < f: facet name = "a lot" >

  < af:selectManyListbox id = "namingp1" simple = "true" label = "#{attrs.queryClass}" "

  ' autoSubmit Binding = "#{dropListComp.selectManyListBox}" = "true" valueChangeListener = "#{dropListComp.selectManyValueChange}" >

  < f: attribute name = "queryClass" value = "#{attrs.queryClass}" / >

  < / af:selectManyListbox >

  < / f: facet >

  < f: facet "single" = name >

  < af:selectOneListbox id = "sl_2" simple = "true" label = "#{attrs.queryClass} '"

  autoSubmit Binding = "#{dropListComp.selectOneListBox}" = "true" valueChangeListener = "#{dropListComp.selectOneValueChange}" > "

  < / af:selectOneListbox >

  < / f: facet >

  < / af:switcher >

  < / af:panelLabelAndMessage >

  That's how I try to retrieve the label or f: attribute queryClass in my component class. I get null for both directions.

  	{} public void setSelectManyListBox (RichSelectManyListbox selectManyListBox)
  	this.selectManyListBox = selectManyListBox;
  	If (this.selectManyListBox.getChildCount () == 0) {}
  	queryClass = (String) this.selectManyListBox.getLabel ();
  	System.out.println (".. queryClass of the label..." + queryClass);
  	If (queryClass is nothing)
  	{
  	queryClass = (String) this.selectManyListBox.getAttributes () .get ("queryClass");
  	System.out.println (".. queryClass of attr..." + queryClass);
  	}
  	If (queryClass is nothing)
  	queryClass = "glog.server.query.powerdata.InvolvedPartyQualQuery";
  	this.selectManyListBox.getChildren () .addAll (buildDropListSelectItems (queryClass));
  	}
  	}

  Thank you.

  Hello

  If your declarative component has a defined class of request attribute then #{attrs.name_of_attribute} called from Java should be able to solve

  Frank

• models of collage for use with photoshop?

  Hello

  I'm doing a directory

  I intend to make the ads full page 2 - in addition to the text, I have pictures of 35-40 I want to understand

  are there templates to facilitate the placement of the photos?

  I'd like a template that is editable

  Thanks for your help!
  =)

  Photo Collage Toolkit

  Scripts for Photoshop is powerful and I think that this package demonstrates this a video showing a collage of 5 model PSD image fills with images:

  The package includes four simple rules to follow to make Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.

  1. Models of photo collage for the desired print size - width and height of the size and DPI print resolution.
  2. Photo collage templates must have a background layer in Photoshop. The content of this layer can be anything.
  3. Photo collage templates must have alpha channels named "Picture 1", "Picture 2"... "Picture n".
  4. Photo collage templates layers above the background layers must provide transparent areas to reveal the images which will be placed below them.

  There are fourteen scripts in this package, they provide the following functions:

  1. HelpPhotoCollageToolkit.jsx - online help
  2. TestCollageTemplate.jsx - used to test a model of Collage of Photo while you're doing it with Photoshop.
  3. CollageTemplateBuilder.jsx - can build models that are compatible with this toolkit scripts.
  4. LayerToAlphaChan.jsx - used to convert a stack of the Prototype Image layers in a document template.
  5. InteractivePopulateCollage.jsx - used to fill interactively model Any Photo Collage. Offers more user control insert images and text.
  6. ReplaceCollageImage.jsx - allows to replace an object layer dynamic image collage populated with another image resized and positioned correctly.
  7. ChangeTextSize.jsx - this script can be used to change the size of text Image stamps when the size used by the filling did not work well.
  8. PopulateCollageTemplate.jsx - used to fill a Photo Collage template and leave the populated copy automatically opened in Photoshop.
  9. BatchOneImageCollage.jsx - used for the models automatically batch fill Collage that have only a single image inserted. The Collage or picture may be stamped with the text.
  10. BatchMultiImageCollage.jsx - used to model automatically batch fill any Photo Collage with images in an image source folder. Easier to use than the interactive script. Recorded collages can be twisted.
  11. PasteImageRoll.jsx - paste Images into a document to print on roll paper.
  12. BatchPicturePackage.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder.  Rotation of images for a better fit.
  13. BatchPicturePackageNoRotate.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder.
  14. PCTpreferences.jsx - edit this file to customize Collage fill preset scripts and add your own layer styles.

  Documentation and examples