dv5t-1000

Similar Questions

• HP dv5t-1000 cto: ram upgrade

  I was told I could upgrade my ram using a pair of 2 GB CT25664AC800 chips.  Is this correct?

  Thank you.

  Sorry

  Try again:

  http://www.crucial.com/USA/en/compatible-upgrade-for//Pavilion-dv5t-1000-CTO

  You can launch the Cruciales System Scanner

  2 GB DDR2 PC2-6400 unbuffered NON ECC 1.8V 256Meg x 64

  CT896663

  • DDR2 PC2-6400 • CL = 6 • unbuffered • NON-ECC • DDR2-800 1.8V • 256Meg x 64 •
  • Update for HP - Compaq Pavilion dv5t-1000 CTO system.

  2GB kit (1GBx2) DDR2 PC2-6400 unbuffered NON - ECC, 1.8V 128Meg x 64

  CT896659

  • DDR2 PC2-6400 • CL = 6 • unbuffered • NON-ECC • DDR2-800 1.8V • 128Meg x 64 •
  • Update for HP - Compaq Pavilion dv5t-1000 CTO system.

  4GB kit (2GBx2) DDR2 PC2-6400 unbuffered NON - ECC, 1.8V 256Meg x 64

  CT896657

  • DDR2 PC2-6400 • CL = 6 • unbuffered • NON-ECC • DDR2-800 1.8V • 256Meg x 64 •
  • Update for HP - Compaq Pavilion dv5t-1000 CTO system.

• Can I use a bestbuy for my Pavilion dv5t-1000 hard drive?

  Hard drive on my Pavilion dv5t-1000 is a failure.  Do I have to use a replacement drive hp because of a partition that hp adds to their hard drives for recovery?  Can I use my HP recovery disks and backup of recovery on a hard drive purchased in-store?  Is no longer under warranty.

  Hello:

  You should be able to do it without problem.

  Make sure that the drive you buy is the same specifications (SATA II, 2.5 ") and size in GB (or larger) then the original one.

  Paul

• upgrade memory dv5t-1000

  I have this old hp laptop (dv5t-1000). It came with vista 64-bit. I upgraded to 64-bit windows 8. Currently it has 4 GB of ram and I was wondering how much more ram can take? Since its 64-bit, I can go up to 16 GB, I guess? and what type of memory should I buy?

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01550108.PDF

  2 & 3 memory upgrade info can be found in Chapter 1 on pp.

  You are already at the maximum according to the book.

  The amount of system memory is dependent on the BIOS and hardware configuration of a specific PC.

  The only thing that is a 64-bit operating system is to allow Windows to address more than 4 GB of memory system.

• Model year for dv5t-1000

  What is the year model for hp dv5t-1000

  Oct-2009 is the end of production of this show. Hope this information helps.

• Windows 7 64 - bit drivers of Webcam for dv5t-1000

  I must say, the dv5t has been solid as a rock and runs beautifully for the 3 years I've had.  In terms of operation, it is almost perfect.

  Here's my problem.  I've upgraded to Windows 7 Ultimate 64.  Everything works except for the webcam.  It is not detected as an unknown device.  The operating system, it seems that there is simply no.

  Here is what I tried:

  Install all the drivers for 32 bit and 64 bits of Vista and Win 7 that could possibly related to the webcam to include various iterations of the 'HP MediaSmart Webcam Software' current versions past and old for all related models dv5t.  The software will not be installed due to no webcam detected.   I got the 2.2 version to install and it works, but you can't do anything about it due to no webcam detected.

  Then I went on the Intel site that the newest chipset offered, I had.  According to Intel, everything was valid or current except my wired NIC I've updated that.  However, nothing helps.

  I did several analyses of material and no still no detection of webcam.  I have all the latest patches from Microsoft and HP, as appropriate.

  I tried to search the real manufacturer to the webcam for a model number and work backward from there, but I was unable to find any info on it.

  Contacting customer service has no performance, no results. (they have been great in the past, btw)

  I tried making in HP and on internet forums.  In the forums there are others who do and do not have the same problem, but it was not clear what dv5t flavor they had.  I tried the solutions proposed in the forum, but still nothing.  The internet did not get results, either on this issue.

  The webcam worked with Vista Home 32, the operating system that originally shipped with the laptop and I've tried the drivers too.

  If I had to guess the East just a certain disparity between the OS, webcam or the motherboard.

  Please, if you have a solution, publish and share the wealth.

  Really, I am satisfied with the dv5t, as it is the only model of this type at the time to offer a 16: 9 screen (all others were 13 x 8 and WOW what a difference).

  Nothing definite to solve this problem would be great.

  Thanks in advance for your time on this.

  Problem solved!

  Here's what I discovered after working in this market and stop for about a month.

  The problem was Windows 7 do not find the webcam at all after upgrading Vista Home.

  Contributing factors:

  • I've probably only ever used my webcam 3 times and certainly not in the months leading up to my upgrade to Windows 7, so I would not have noticed if the webcam worked during this period
  • Win 7 did not detect that there is a webcam or an unknown device.  'Hidden devices' in Device Manager turned up nothing

  Windows 7 is pretty darn good on the detection of all the parts of your computer.  I thought it was strange.  It worked before, it must at least detect the webcam as he picked up all the other devices I found the drivers for and installed.

  I took that there is a problem of physical device.  Either the webcam has been broken or disconnected.  So I disassembled my laptop.  I reconnect the webcam cable attached to my motherboard.  Who didn't get it.

  After a lucky Google search I found this page.  InsideMyLaptop

  Led me to the HP official service manual.  HP dv5t manual repair

  The maintenance manual describes how to remove the bezel of the screen without having to dismantle the rest of the computer.  After popping off the coast of the bezel and pulling on the webcam and pulling about 1/4 inch connection cable, the webcam was detected automatically and works perfectly now.  Instructions for joining the webcam are very good in the repair of HP, but not for the faint of heart.

  I break off a small piece of plastic that allows to lock the bezel into place on the screen.  It does not ruin the bezel adjustment back to the monitor but required a certain amount of power frightening to remove.  My computer and a built-in webcam continue to operate normally and is aesthetically intact.

  If you do not want to take the risk of potentially ruining your laptop and it is also works well, don't do that.

  I would highly recommend against doing this to anyone as it will cancel probably any warranty you have left on the laptop, if you left any guarantee AND ruin your computer.  I consider myself lucky to for having not broken bezel.

  The lessons reinforced:

  If your computer does not detect a device, the device is not connected or is broken.  Work the problem from this angle.

  Thanks Mumbodog, for your entry.

• HP Pavilion dv5t-1000 will not start

  Hello

  Our battery died and now the computer initializes more. I did a hard reset, then unplugged, removed the battery, then hold the power button for 15 seconds, then plugged in and then tried to start.

  When we try to start, we get the HP screen and it says esc at startup. When we reached the esc, the computer is blocked.

  When we try to start and enter the EFI interface by pressing esc, it will beep with a solid 16 times pulsating rhythm. He says then esc... pause start-up, and then the computer is blocked.

  When we try to start and enter the EFI interface by pressing F10, the computer emits the same and then says the F10 bios menu, and then the computer is blocked.

  I fear that there may be a problem with the bios or other hardware failure. I would appreciate any advice.

  Thank you

  Paul

  Hi Paul,.

  Could you try removing the hard drive and you try to start?  Obviously it does not boot to the OS, but it can go beyond this splash screen.  If this is the case, try reinstalling the hard drive and see if it works now.

  If it freezes again without the installed hard drive, it may be a corrupted BIOS, and I see that you have tried to solve that with no luck.  I tried to click that link you, but he was dead.  You did to be sure it was the correct version of the BIOS?  If you have Vista or Windows 7, I think it would be the right version of the BIOS:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75233-1&LC=en&DLC=en&cc=us&product=3744198&sw_lang=&OS=4062

  Of course you also could yourself some pain if this laptop is under warranty.  The guarantee can be verified here:

  http://www13.itrc.HP.com/service/ewarranty/warrantyResults.do?admit=109447627+1286541891570+28353475

  I hope this helps.

• Pavilion dv5t-1000: HP Photosmart D110a remains offline...?

  I have read so many valuable tips and have received very constructive notice, things that I had no idea would affect printer & network performance.  I learned that so many small details, which can be "Out-of-whack", one can torpedo my home network.

  Does my printer...? Settings of the printer...? My computer...? My router...?  My roof... antenna?  My signal... strength?

  My head is spinning...!

  My printer is always Offline...?

  Stardustor

  Following your suggestion (s), I had some success in getting my D110a to print...!

  I don't understand what the problem or the solution is / was...?

  My only concern is that it now takes 8 to 10 minutes to respond to a print command...?

  I tried to leave "Well done", but keep being told I can't...?

  Stardustor

• Problem reading HP DV5T Blu - Ray after upgrade windows 7

  I have HP Pavilion dv5t-1000 CTO Entertainment Notebook PC (Vista) with the Blu - Ray player. We use to watch Blu - Ray using Quickplay movies without any problem.

  But after upgrading to Windows 7 last month, quickplay plays are more Blu - Ray movies. It just hangs. I tried to upgrade Quickplay, installation HP Media smart, but nothing seems to work.

  There seems to be no update firmware or updates specific windows 7 blu - ray to the HP support site.

  The whole subject seems to be difficult, mystery and disappointing.

  Is there a solution? Can I pick up my blu - ray reading?

  Help, please!

  HaggisCat thanks for your reply.

  Perfect, this fixed the problem. The blu - ray disc now plays perfectly.

  I have 32-bit Windows and my NVIDIA GeForce 9 M version of the pilot was 179.04.

  I let NVIDIA site to automatically detect and recommend the pilot, and he recommended the latest version 258.96.

  I was able to install it on top of the other oldest successfully.

  Thanks for your help, appreciate it.

• Need a station for Dv5t

  Greetings,
  My old dv5t 1000 display goes just to the South of 2 years and it costs $$$ to replace. I'm looking for a docking station that correspond to this model that I can plug in. What docking station would that be? I have all the stuff (monitor, mouse, keyboard...). I found the quick dock one but it doesn't have a power button / stop on the dock.

  Your advice is appreciated.

  John.

  http://www.shopping.HP.com/webapp/shopping/store_access.do?template_type=product_detail&product_code=VY843AA%23ABA

  This docking station has the power button on it?  I don't see in the photo ...  And I was wondering why it is so expensive for just a docking station?

  Once again, thank you for your links.

  John.

• Relocation of Digital Persona

  I had initially to Digital Persona to uninstall because it would not allow me to use Windows Media Center. I have no need to use WMC, so I would like to be able to reuse my fingerprint reader. What should I do to reinstall all the Digital Persona software?

  Thank you

  Pavilion dv5t-1000, Vista 32, Intel T9400, 3 GB of RAM, NVIDIA 9600 M GT

  Hello CannibalCrowley,

  You need the "DigitalPersona Fingerprint Software for Microsoft Windows Vista (32-bit)"

  Link: SP37618 ...

  I hope this helps.

• Alternative to wireless Intel Wifi Link 5100 AGN card?

  I find that my Intel 5100 AGN wireless network card does not work as well as he used to.  I tried everything... even the drivers are perfectly up-to-date.  But I keep losing the connection to my wireless router, even if the strength of connection between 3 and 4 bars.  I find that I rarely make me fall if I have 5 bars.  But if it drops to 3, I get periodically fall any wireless network that I use.

  I want to replace this card by something better, but of course compatible with the HP dv5 (my specific model is dv5t-1000).  Any recommendations?

  "If you keep an open mind, life will give you more opportunities."

  Hi, Gary:

  What I meant by my statement about you have the best of the cards available for your laptop is that, Yes, I'm sure that the Intel 5300 is an improvement on the 5100, but the problem is that you can not install the 5300 in your notebook.

  The Intel 5300 is not supported (only the numbers of cards/coins listed in the service manual can be installed) and your laptop wouldn't start until you have removed the card.

  You can try another card in the manual, if you wish.

  However, you are limited to the:

  4322 Broadcom 802.11a/b/g/n WLAN module

  Broadcom BCM4312 802. 11 b / module g WLAN (not a N Wireless card)

  I guess you can use an external USB adapter, but I would like to get one with an external antenna connected to him, because I would have to believe that installing wire of 3 antenna in your address must provide superior reception on a simple USB wireless adapter with an internal antenna as its single antenna.

  The antennas go all the way to the top of your screen.

  Tinker you with advanced network adapter settings?  They can be found by clicking on the card in the Device Manager, click the Advanced tab.  Take note of where the parameters are now so if something is buggy, you can change their return.

  Here is a guide to the advanced settings that you have and the recommended settings for them.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025393.htm

  Paul

• HP dv5 first recovery disc loaded, but never asked for the second

  HP Pavilion dv5t-1000, p/n KQ574AV Windows Vista 32-bit, I have a set of recovery disks that I made before I started using the machine.

  Yesterday, my laptop froze during the download of reader photos.  System rebooted to a black screen with cursor flashing at the top left.  Removed the battery & power cord; power button down for 15 seconds; restarted the computer to another black screen.  Repeated several times.

  A disk failure hard while slot guaranteed 2 years, including fixed hp.  On the keyboard Panel, the three before white lights: power light, lightening bolt not away and hard drive/array turned on & strong flashing.

  The recovering of the disks and rebooted the computer.  "Windows is loading files...". ' First disc ends, but computer never asks for the second recovery disk.  Screen changes from black to blue.

  New message: PC it is not supported by the system recovery discs.

  You will not be able to continue to recover this system with disks.

  Can someone help me please!

  Hello

  Ok.

  If you get a disc error, then it would seem more likely to be a hard drive failure.

  View the results you get on the test drive.  If your drive is failed then try to restore or recover simply will not work. A replacement hard drive will be necessary.

  You may be able to recover your data on the disk by putting it in an external enclosure and connect to another Windows PC.

• Huawei has installed a malware during the installation of the drivers for the wireless modem: tips to remove the registry keys?

  Huawei sd usb storage

  Applies to: Windows | Windows Vista | Hardware and drivers

  A month before, I let a co-worker install a modem Wireless USB as Huawei to use my laptop somewhere without wifi service.  Subsequently, I uninstalled the software drivers because I don't think I'll ever use this modem again.

  Now, I noticed that there are several registry keys for different devices of e/s as:
  Huawei_sd_storage_usb
  and
  Huawei_some other drive type

  None of these registry keys can be deleted, I get an error saying that "year error occurred during an attempt to delete the key.  Same thing if I try to write data in the registry key.  This behavior resembles a persistent virus and not a register legitimate supporting a legitimate PnP device.

  I then rebooted in safe MODE, thinking which should pick up anything the malware is hung.  No go, same thing, cannot remove the key and cannot modify the data in the key.

  None of the malware scanners were able to detect this, including:
  Paid last AVG
  Windows Defender
  Microsoft Security Essential
  Spybot S & D latest
  Malware Microsoft Fixit

  I don't trust Huawei, and what look like these keys are to monitor my laptops I/O activities through any player or the USB port.

  HP DV5t-1000 CTO
  Pentium dual core 2.54
  4 GB of DDR, Home Premium Vista 64

  I'm moving your question on the forum of Windows for material and the Drivers.These are the registry keys related to the legitimate drivers provided by the manufacturer of the device and are not related to malware.

  Note, however, that you have an overload of running security software and some should be deleted. If you use Microsoft Security Essentials, you must disable Windows Defender in Vista and AVG should be removed, preferably using the AVG removal tool. I have no idea what is the Microsoft Malware Fixit.

  You should never have more than one security product installed on the PC, providing active protection / scan. This can cause performance problems, system instability and may adversely affect the effectiveness of these two products to provide protection.

  -steve

• My Nasa TV and the Viet Nam TV stopped working

  My Nasa TV and the Viet Nam TV has stopped working. I uninstalled them both without success. What should I do now?

  I don't know exactly what happened, but I think that maybe it's an update or a program I installed. I have another account on this laptop; HP DV5T-1000, for the games.

  Hello

  ·         Are you able to see other channels except Nasa and Viet Nam TV?

  ·         You have uninstalled, does the TV tuner card or drivers?

  Method 1: If you feel that this problem happened after the update or a program that you have installed, try to perform a system restore to restore work correctly parameters, to do this, follow the instructions below:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  For more information, see this link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2:

  You can try to temporarily disable a software antivirus (and any other security software) and the firewall on the computer and try to connect to the TV.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

  Note: Make sure that you enable the antivirus software, other security and firewall programs.

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps!