DVD breaks just before the Encore CS3 credits

Similar Questions

• Bravo music player stops just before the end of a song

  When you use the music player, it will do a break just before the end of the song and does not move to the next selection. It does not appear when the screen is not asleep, but I do not know exactly that this is the case. Everyone having this problem

  @Midnight-

  Do you have applications in the end task on the Auto List Manager or use a 3rd party Manager tasks that ends the apps? You can delete an application, one at a time until he started working and then you will know which app can not be in Task Manager which will cause the music to stop when the screen turns off.

  Mark

  Support Forums Manager

• I want to add the treatment just before the opening of the session.

  

  I have a request to the APEX. I want to add the treatment just before the opening of the session. If the password has expired, I need to change. Also, if they have too many failed connection attempts I need to tell them (the administrator must be able to deliver)

  The connection process works, but I need further treatment. A screenshot is attached.

  Request Express 4.0.2.00.07

  Thank you

  
  

  Order this thread from the past... : Re: authentication after redirection before the user logged in

  Boils down to make a branch based on the condition of the expired password met on the lanyard page...

  Thank you

  Tony Miller
  Los Alamos, NM

• DVD Menu button needing help Encore CS3

  Hello

  I have Encore CS3 and I'm doing a menu of simple wedding. I use one of the menus wedding that it comes with, the individual, one is called

  "Menu of the bride' this menu has five buttons (see below) if the 'photos' button has been selected it would look like this...

  Marriage

  Direct access to scenes

  Photos

  *****************

  Behind the scenes

  Extras

  I did not like how the nail out beyond the word so I edited the highlight in Photoshop to get the same size of the word (example below) ("photos" selected)

  Marriage

  Direct access to scenes

  Photos

  ********

  Behind the scenes

  Extras

  My problem is when I selected ' Photos' and I hit the arrow upward on my overview of remote control/Encore DVD selection button jumps from the 'Photos' button to the 'The Wedding' button. When I'm on the button 'The marriage' and on my DVD remote control/still previsualisez up arrow goes to the

  Button "chapter Selection". He has done this before that I edited the climax.

  How can I fix this so my choice is "Photos" for "Chapter selection" and after that "marriage"?

  Any help appreciated,

  Nicholas

  Nicholas,

  Button routing is probably set on automatically to the buttons of road. Normally, it works pretty well. It is based on the order of the buttons layer games, as displayed in the PS, with inside a like button 1 on-site through the order. This is, regardless of any change in the name that could apply to these button layer sets.

  In Encore, with the Menu in the Panel of the Menu change, tap the button routing and uncheck automatically Route buttons.

  You will now have a series of "crossroads" for each button in the Menu. in the middle of each cross will be the number 1 - X button. Of the four arms of each cross will be other numbers button. It can now be changed to reflect your desired navigation. Let's say for the button 2, the top arm of the cross a button number 1, but you want to button number 5, just slide the button number 5, and this number at the top of the arms of the cross will change. Just be sure that all the button numbers accessible from somewhere, or that the user will not be able to directly access this button.

  Hope this helps,

  Hunt

• I've updated to Firefox 10.0 today, and I don't like. How to revert to the version just before the 10.0, please? Thank you!

  I want to just go back to the version BEFORE the 10.0 update.

  We have 3.6 or you can wait like they just need to update that it is compatible with version 10.0

  3.6 available here http://www.mozilla.org/en-US/firefox/all-older.html

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• I get a blank screen just before the connection with a single visible cursor

  Currently, my computer will load where the login screen should appear, but instead merely display a white screen with the mouse cursor in the middle that I can move around.

  I tried restoring the system manually at a point in time that he began to arrive. That did not work. I tried a restore of the system manually to a time past, does not work well before it began. I tried to have my computer to do in the repair option to "restore to the last known good configuration" and that did not work. I ran various programs that look for malware, spyware and viruses many times and found a few things, but nothing of this has solved the problem. I tried to check all my drivers and they say all work and all drivers say they do not need an update. I tried the system repair tool and he found nothing wrong, even with the memory to check tool that finds nothing wrong. If I press SHIFT 5 times to the white screen with the cursor, I'll hear the keys to self-retaining beep, but no prompt.

  One thing that happened was that I was once in the blank screen and I pushed to escape and I noticed that the cursor has turned to an hourglass. Then I tried Ctrl alt delete and which opens a command prompt and from this command prompt it allowed me to go to the usual login screen. Then, my computer work as it did just before this problem (a warning would pop-up Windows saying that it stopped a program that you try to start itself without permission and who would be come like every minute or so). But since then I havnt been able to reproduce this same result to load or by opening the command prompt.

  And safe mode works very well.

  I was reading around online and there was something that said they had the same problem and download internet explorerer 7 helped. as well as a similar problem which was fixed when IE8 was downloaded an update of windows. the guy deleted and it was fine since.

  I tried to download the latest version of Internet Explorer, but it cannot be loaded without rebooting, and I can't enter the normal screen that opens after the cut to finalize it. I always still try to remove it as well as the update of windows.

  Another difference I noticed is in the loading bar than before windows starts as the login screen. It used to be thick green blocks that crossed with the windows logo. Now, it's a block really thin yellowish green (which reminds me of the life blocks Mega Man in his health bar if that helps lol) and no windows logo because it does it (if it says copywrite along the bottom windows corporation).

  If anyone has more aid in addition to the info windows give a repair tool, please help. Thank you.

  Hi chase11,

  Support for Windows Live One Care stopped if you need to uninstall it and move to another antivirus/antispyware/security protection. OneCare online scanners are always available.

  Here the Site of OneCare Live:

  http://OneCare.live.com/standard/EN-US/3/default.htm

  Help and Support
  http://OneCare.live.com/standard/EN-US/3/helpsupport/default.htm

  Use the methods of uninstalling suggested here or by Windows Live OneCare.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  How to uninstall Windows Live OneCare
  http://OneCare.live.com/standard/en-us/install/uninstall.htm

  See also this thread for more information about uninstalling Windows Live OneCare - it is a
  chore however it must be done.
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ===============================================================

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Update of a cpatured program - master machine loading for just before the last snapshot

  Hi, I was wondering if there is a way to load your machine 'clean' return the point one captures just before end the capture and built your thin app. This would save me a lot of time on the update of one of my parcel that has many parameters that must change. that is, I would like to: -.

  1. Start the initial capture on machine vanilla image
  2. The original software and make any changes
  3. end of capture and build app.exe

  Then 6 months later, when a software update arrives.

  1. Power on vanilla Image PC
  2. start the capture process
  3. somehow loading machine in the same position that it was just before step 3 above, using the previous data entered and without having to re - install the software again
  4. install the updates and make further changes
  5. end of capture and build a new update app.exe

  I have seen how to put side by side day and sbmerge, etc., but they seem to imply that you start capturing the image from scratch and begin to build the image where you left on the original version.

  Thanks in advance.
  Kevin

  Hey Kevin,

  A new "Physics project" feature available with ThinApp 5.1 can extract the ThinApp project files to a clean machine. It is also good to reinstall the software again. Once the ThinApp project files are extracted, you can make changes or update before proceeding to postscan.

  Please take a look at this blog and video.

  The new feature of 5.1 ThinApp & quot; Physics project & quot; He explained | VMware ThinApp Blog - Articles from VMware

• Strange error messages just before the accidents of the body

  Latest updates to 2015 of the body
  10 64-bit Windows
  6-core I7 3.2
  980gtx 4 GB
  32 GB of ddr3 memory
  
  Recently I've been doing strange errors that cause the body to crash a lot. I have no idea what may cause the problem and I don't seem to have other programs just to the top and crash on me like body. I tried to update the drivers completely but that seemed only to make things worse but that might have been just a coincidence.
  
  When searching for error "Cannot allocate temporary data to reverse" nothing of use appears in google. Is there a database of adobe error message I should be through?
  

  The project I'm trying is large enough and had a few former premiere pro imported projects that could cause hiccups?

  Attached below are some of the error messages that popped up. Everything worked fine until the "low level" Adobe Player cause body crashing. After having reopened organization the following errors appeared "impossible to affect", "AE. MASK', 'contact of entry', and 'PPixHandle '.

  See you soon,.
  James

  

  

  Thanks for a detailed response.

  First of all, I suggest you create a new (empty) project and import your existing of the project leader (.prproj) using the media browser.

  As you work with a large number of data, how are your configuration of disks?

  This project is to use as much ram as I can give it. It is a hunger project. This could help boost errors. My system has 32 GB of ram, I allocated 6 GB for other programs / windows to use. I used to have only 4 GB allocated for windows but that was causing errors of memory that windows needed more runs while this project was open

  I would say that allocate more memory (8-10 concerts IMO) windows to avoid bottlenecks because other processes are equally important.

  Is usually a specific cause for the error messages I posted in the original post to protest or they are generic error messages?

  These errors are mostly generic.

  Thank you

  Regalo

• Computer stopped at reception with the icon of circle of rotation just before the office has on screen. __

  I had to stop the computer holding in the power button / stop. I have it turned on and opt to start windows normally and loading normally initially. When he got to the Welcome screen with a circle of rotation which is where it has been since-for about an hour or two. I'd appreciate any help with this, all I have is a hammer.thanks

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Some messages are played just before the subject

  On some, not all, until the message has been opened, there is a star at the beginning of the subject line.

  What does this star signify?

  you have never seen it. This is the first time these mails have been listed here for you to see, rather than unread mail which you may have seen before, even if you he has not opened.

  This seems all wrong, but I can't think a better explanation...

• "Out of range" error message on my screen just before the record screen

  Having this little bug quite annoying, when I boot Windows 7, it starts to load then all of a sudden my monitor will go just black and an error "out of range" will pop up. I tried everythinggggg I know to solve this problem, connected in safe mode and updated all my graphics drivers and no still no chance. Currently in safe mode as we speak. I think it's something to do with my resolution, graphic card. I have a Nvidia 9600 GS.

  Please helpppppp

  I tried re - install the new drivers from Nvidia again this morning and suddenly seem to function very well, didn't really do something different yesterday. Just started in a lower resolution, and then downloaded the driver for Windows 7 (64 bit) of the Nvidia site.

• A little black box appears at the top left of my Windows 7 login screen just before the Welcome screen and the stalls password when I try to enter. HELP PLEASE?

  Whenever I turn on my computer for a week, I try and put my password and after the first or the second key it stalls. He again entered my password, but I don't see whether registration in the password box. I also have a little black box that is slightly smaller than the size of a post-it note in the top left area of my screen for half a second, then it disappears and continues to my home screen and office as usual.

  I had this problem for about a week, and I can't understand what is the problem. I googled some things, but no one had the right answer. Someone said it was a startup with a defective software program, but I checked and I have the same 4 startup programs I've had there for a year. (DELL Wiireless WLAN Card, IDT PC Audio, Synaptics Pointing Device Driver and NVIDIA Compatible Windows 7 display driver) Everything is up-to-date and I already have Windows Update.

  * A video that I captured from my computer of this problem: http://www.YouTube.com/watch?v=GViQv-Xrm0U 

  (password stops around 0:42 and black appears at 0:52)

  Someone help? I'm paranoid that it might be a Spyware... ? None of my passwords and others are corrupted though, everything has been fine. I am making bluescreens (but not daily). I scanned with Malewarebytes and found nothing and I do that again right now. I also tried Registry Mechanic and Windows Security Essentials, but found nothing.

  I have no idea what Forum put it, this is my first time using this site...

  Model: DELL Studio XPS 1330

  Windows 7 Ultimate (64-bit)

  (I had this computer for about a year)

  The position of Bramble to drown in this issue How to start the program before windows logon user 7 Siena above [Archer] suggestion that you should study the entries in the services.

• 3.5.3 host restarts just before the end of load OS

  Greetings,

  I have a toughy. We have a HP DL585G2 (of our ESX platform, 32 GRAMS, QLogic standard) that I just reinstalled ESX on this morning (not yet installed product HP). I had 3 SR Omnium with VMware in the last two months on this box. The last thing that VMware said, is probably the corruption of kernel so re - install the OS I did. I ran HP diagnostics again and again and never found a single question (surprise, surprise).  I've changed hard drives in this regard... the next step is to test memory with a complete RAMCHECK LX.

  Anyway, whenever I try to start the server operating system almost entirely loads... when it gets to the 'start-up webaccess' boxes automatically restarts... This is consistent... until the boot partition is corrupted and won't load the random reboot.

  Anyone seen anything like this or have a thought on what could cause this?

  Mother don't let your children make support to output for a living!

  Hello

  Disk timeouts take minutes and especially you want Diagnostics to test other things as often as possible. Wait for the disc STOP usually all diags to the end. So instead of 100s of tracks you could get only 10. You want more than one race with HP Diags.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• CS6 - keyframe will not align on the end of the clip, it snaps just * before * the end

  If I move a picture on the screen, the final keyframe will jump not at the end of the clip (even if it align with the edge of the window). It is with the timeline to zoom-out keyframe. Once I have break the keyframe at the end, I have to manually zoom in on key images, find the last key frame which should be end of the clip, but it of not, and then drag it to the absolute end of the clip.

  Does anyone else have this problem? I have to do this every time!

  

  Screenshot 1: timeline Keyframe broke at the end of the clip, zoom out.

  

  Screenshot 2: timeline zoomed in, why is not the keyframe at the end?

  Hi Prizm4,

  This problem is fixed for first Pro CC (7.1). If you do not want to see this problem for CS6, please file a bug report: http://www.adobe.com/go/wish

  Please see Ann Bens post for a workaround: http://forums.adobe.com/message/4532252#4532252

  Thank you

  Kevin