I get a blank screen just before the connection with a single visible cursor

Similar Questions

• A little black box appears at the top left of my Windows 7 login screen just before the Welcome screen and the stalls password when I try to enter. HELP PLEASE?

  Whenever I turn on my computer for a week, I try and put my password and after the first or the second key it stalls. He again entered my password, but I don't see whether registration in the password box. I also have a little black box that is slightly smaller than the size of a post-it note in the top left area of my screen for half a second, then it disappears and continues to my home screen and office as usual.

  I had this problem for about a week, and I can't understand what is the problem. I googled some things, but no one had the right answer. Someone said it was a startup with a defective software program, but I checked and I have the same 4 startup programs I've had there for a year. (DELL Wiireless WLAN Card, IDT PC Audio, Synaptics Pointing Device Driver and NVIDIA Compatible Windows 7 display driver) Everything is up-to-date and I already have Windows Update.

  * A video that I captured from my computer of this problem: http://www.YouTube.com/watch?v=GViQv-Xrm0U 

  (password stops around 0:42 and black appears at 0:52)

  Someone help? I'm paranoid that it might be a Spyware... ? None of my passwords and others are corrupted though, everything has been fine. I am making bluescreens (but not daily). I scanned with Malewarebytes and found nothing and I do that again right now. I also tried Registry Mechanic and Windows Security Essentials, but found nothing.

  I have no idea what Forum put it, this is my first time using this site...

  Model: DELL Studio XPS 1330

  Windows 7 Ultimate (64-bit)

  (I had this computer for about a year)

  The position of Bramble to drown in this issue How to start the program before windows logon user 7 Siena above [Archer] suggestion that you should study the entries in the services.

• "Out of range" error message on my screen just before the record screen

  Having this little bug quite annoying, when I boot Windows 7, it starts to load then all of a sudden my monitor will go just black and an error "out of range" will pop up. I tried everythinggggg I know to solve this problem, connected in safe mode and updated all my graphics drivers and no still no chance. Currently in safe mode as we speak. I think it's something to do with my resolution, graphic card. I have a Nvidia 9600 GS.

  Please helpppppp

  I tried re - install the new drivers from Nvidia again this morning and suddenly seem to function very well, didn't really do something different yesterday. Just started in a lower resolution, and then downloaded the driver for Windows 7 (64 bit) of the Nvidia site.

• After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I am on Windows Vista.

  After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I picked up at an earlier date and reloaded the software TT 3 times with the same result. I tried of caraa start windows Explorer by using the Task Manager, but it does not work.

  Hi AndyCantore,

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• BlackBerry smartphones how get torch home screen just show no apps when the menu bar is closed?

  Please bear with me, I'm struggling with how to explain cela ha ha!

  On the homescreen torch, you tap the 'all' downstairs bar to view the full menu. When you touch the bar once again it closes the application menu.

  When I got the torch the menu, when closed, displays only a row of 4 applications (SMS, browser, etc.) but I must have pressed something without knowing or changed a setting if it showed no apps at all, when I closed the menu. I preferred this as I love the home screen just show the background on the phone and not cluttered.

  However, it has changed back recently and is now showing TWO rows of apps now not even one! and cannot for the life of figure me out how to change it back?

  Thanks to all who help!

  Simply touch and drag down to the bottom of the screen. You will then see just the arrow ^ (you can change this way of 0 to 3 lines of icons). Then, when you tap on the bar with the arrow, you will get your full screen, the icons back.

• Creative cloud no longer works. When I start in the menu or the systemtray, I get a blank screen of the creative cloud.

  Creative cloud no longer works. When I start in the menu or the systemtray, I get a blank screen of the creative cloud.

  Hello

  You can refer -:new Creative Cloud application unusable: it is empty!

  and also try:-screen black at sign - in | Creative Office Cloud app

  Also try:-App does not open. Wheel of progress turn continuously

  Hope this helps!

• Bravo music player stops just before the end of a song

  When you use the music player, it will do a break just before the end of the song and does not move to the next selection. It does not appear when the screen is not asleep, but I do not know exactly that this is the case. Everyone having this problem

  @Midnight-

  Do you have applications in the end task on the Auto List Manager or use a 3rd party Manager tasks that ends the apps? You can delete an application, one at a time until he started working and then you will know which app can not be in Task Manager which will cause the music to stop when the screen turns off.

  Mark

  Support Forums Manager

• my laptop with vista booted up and I get a blank screen with a cursor that I can move.

  I have a PC Toshiba laptop with vista.  Everything worked well until one day he started upward and I get a blank screen with a cursor that I can move.

  I tried all modes of security with no luck.
  I noticed that when it starts in safe mode it will stop on windows/system32/drivers/crcdsk.sys every time.
  I did some research and found people have had the same problem and solved with a running repair disk, I did not.  Is there a fix I can do without the disc?
  Thanks for the help in advance

  I solved my problem.

  My problem is that some how I lost my video drivers, so I used hirens boot cd to get and discovered was my drivers were in the files and restored to an earlier date.
  Once it happened I restarted and again, I got a screen.
  I'm not sure how the drivers has been removed, but I ran virus checks and malware on my computer did not
  But its been fixed.  I was afraid that I would have to rebuild and go through the hassle to move my files and rebuild it but glad I do not have
  Thanks for all the help

• The download starts and gets to about 50 MB before the zone State says down load failed after refresh

  Hello

  I just had to update my laptop Azus Windows 8.  I reinstall all my programs.  All my financial records are Open Office, so I need to reinstall the program.  The download starts and gets to about 50 MB before the zone State says down load has failed.  This happens no matter if I choose run or save.  I lowered my security settings for IE but still not completely download.  I downloaded Open Office earlier this year with no problems.  It must be something that I am missing.  Please help I need to do my job.  Thank you

  Do you have any error messages at all when you try to download?

  What utility Antivirus you have installed? Have you tried to disable it temporarily and and see if they work?

  Have you tried to save the download to a different location on the hard drive such as the desktop?

  Have you tried using another user account?

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.

  Press the Windows key + X

  Click prompt (Admin)

  At the command prompt, type the following command, press ENTER.

  ipconfig/release

  then

  ipconfig/renew

  then

  ipconfig/flushdns

  leave the command prompt

  Press the Windows key + R, type: folder

  Press enter

  Delete the contents of the temp folder

  Restart the computer and try to download again.

  If the problem persists, try resetting your router if you are connected to one.

  Turn off the router, unplug it, wait 10 minutes

  Plug it in again, power up once again

  Reconnect the Ethernet cable

  Try to download again

  You can try to download free Office instead which can OO.org Open files.

  http://www.LibreOffice.org/download/

• When I click on my Adobe icon I get a blank screen. I'm looking for a paying customer

  I am a paying customer, but when I try t open my Adobe icon, I get a blank screen.

  Yes, I was helped by chat line K: Nishant... but you have reason, anyone having this problem needs run the cleanup tool to fix it.

• Cannot, sign, only get a white screen, is there something wrong with the application?

  Cannot, sign, only get a white screen, is there something wrong with the application?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  - and step by step http://forums.adobe.com/thread/1440508?tstart=0

  - and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

• Why do I get a blank screen when I connect ExportPDF?

  When I go to export in PDF format via this link, I get a blank screen with only the option to cancel.  Y at - there another link I should use?  https://cloud.Acrobat.com/EXPORTPDF

  Hi the pdf export,

  It is indeed the correct link. Please clear your browser cache and try again. Or try a dfferent browser (see system requirements |) Acrobat.com for a list of compatible browsers.)

  Best,

  Sara

• How to correctly load an external swf file in iosAir app? I get a blank screen.

  So this code works flawlesly we Air for Android, it works very well when I test the movie in Flash, but once I have the export, I get a blank screen. I've done a swf with a place withotu any code, and flash is still unable to load. It's weird cause everything works well when using the shell to the debug option, but when I goes to the white screen of standard debugging appears on my ipad. I read somewhere that it caused by the way flash saves the link to external files. So after the file is compiled Flash is unable to find the files added prefiously, which results in a blank screen. There is clearly something wrong with the way in which the process of compiling the application.

  Tried this:

  var Xpos:Number = 0;

  var Ypos:Number = 0;

  var loader: Loader = new Loader();

  var link: URLRequest = new URLRequest ("Untitled - 1.swf");

  Loader.Load (Link);

  addChild (loader);

  And this:

  var ldr:Loader = new Loader();

  LDR. Load (new URLRequest ("Untitled - 1.swf"));

  ldr.contentLoaderInfo.addEventListener (Event.COMPLETE, loaded, false, 0, true);

  function loaded(event:Event):void {}

  addChild (event.target.content);

  }

  But nothing works. I still get a blank screen. Is it possible to add the SWF manually in the file descriptor cause flash most likely he mess up? I don't really want to use via the command line.

  Read this article, especially the little loadercontext and currentdomain:

  http://blogs.Adobe.com/airodynamics/2012/11/09/packaging-and-loading-multiple-SWFs-in-air-apps on ios.

• HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

  HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

  Hi there @ZiECloNE,

  Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

  Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• I want to add the treatment just before the opening of the session.

  

  I have a request to the APEX. I want to add the treatment just before the opening of the session. If the password has expired, I need to change. Also, if they have too many failed connection attempts I need to tell them (the administrator must be able to deliver)

  The connection process works, but I need further treatment. A screenshot is attached.

  Request Express 4.0.2.00.07

  Thank you

  
  

  Order this thread from the past... : Re: authentication after redirection before the user logged in

  Boils down to make a branch based on the condition of the expired password met on the lanyard page...

  Thank you

  Tony Miller
  Los Alamos, NM