DVD menu with different 1 movie and 4 audio languages (without subtitles)

Similar Questions

• DVD Menu with animation does not start

  I have the DVD menu with background animated and submenues that are built in the same way but the animation and the sound does not start, what is the problem?

  In sound Previewmode opens, but not the animation of backdround when exporting the project for even the sound of the file does not start.

  These problems may be due to corruption of project or odd causes. If you continue this, I create a small test project and add main menu and a sub. See if it works.

• Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, s

  Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, when he got the address "nordensstjrnor". That me ok at first, but now I really need to give the first address once again, "nordensstjarnor". But when I try, the alternative of the site of ' publish on ' old isn't here. And if I try to create a new one, but with the old URL, the box turns red. What can I do?

  The reason why you cannot change nordensstjarnor.businesscatalyst.com is because a different Adobe ID is used for the publication of this site.

  t * [email protected] is used for the publication of nordensstjarnor.businesscatalyst.com

  t s. * [email protected] is used for the publication of nordensstjarnorindex.businesscatalyst.com

  You must make sure that Adobe ID is used in account publish, so that you can see a list of the websites published under this account. Go in Edition > Preferences > publish on Business Catalyst > publish with accounts

  You can pass the accounts for you can also make changes to the sites.

  Thank you

  Sanjit

• Satellite 1800 - DVD stutters, video playback is delayed and the audio is garbled

  Hi all!

  I hope you can help me with this problem. When I try to play a DVD on my Toshiba S1800, playback stutters, video and audio wise, which of course is irritating. I was wondering if this could be a hardware malfunctions or perhsps due to a bad driver software?

  I have tried different DVD software players, and they all have the same show. I heard it could be because that the IDE controllers were not set to DMA mode, but they are on this device. Any of you have suggestions of what causes this problem?

  Thanks in advance,
  Danny.

  What DVD do you play? An original DVD movies or a serious media.
  Have you checked the drive with the audio CD? Is it possible to play audio CDs without worries?

  I m not 100% sure, but maybe what it s only a codec problem. If the different codecs are missing audio and video issues sometimes.

• BlackBerry 10 cannot delete the email account (unauthenticated) / cannot authenticate the email account with different servers SMTP and IMAP (a gmail)

  After updating the OS on my last night in 10.1.0.4181 Z10 (software) / 4633 (OS), all my accounts set up asked for credentials must be verified. Looks like now that it uses some sort of mechanism of OAuth - worked well for my Gmail accounts with two-factor auth.

  One of my accounts that I have Gmail as IMAP server (using a regular gmail.com account), but another SMTP server, with the address on a different domain. I use Gmail as my email client, basically.

  After the upgrade, I am prompted to authenticate, but at some point, someone on my domain set up Google Apps. Has never been for nothing. I wonder to enter * that * password via Google. I don't, and this is NOT the account that I'm trying to connect. (I want a server with user name [email protected] gmail.com IMAP and SMTP [email protected]).

  So I'm stuck... can not authenticate.

  Even worse: Also, I can not delete the account! Delete option is not available until after you have again authenticated. Because I can not delete the account, I can't try to add it again separately - I get an error indicating that the account is already configured.

  All options except wait for the next update of OS or do a wipe/restore?

  (Wipe/restore is really not an option for me, it takes several hours, and the last time I was forced to restore, I lost a good amount of data that I then had to enter manually in restoring to my old 9790 and then it tapping on my Z10.) Not to take this risk again).

  Try this:

  Open an e-mail account with the same account information and email address, but as a pop account to synchronize the account. Both accounts now appear in a new sub-account. Now you can remove the two accounts together. It worked for me...

• Using clips with different frame aspects and pixel in the same project

  Hello

  I have two clips:

  clip1: AVCHD 1440 x 1080 and the rationing of 1.3333 pixel aspect (the ratio of the image is 4:3)

  Clip2: AVI 720 x 576 pixel aspect ratio of 1.0940 (the ratio of the image is 5:4)

  I want to use the two clips on the same project.

  I chose a project suited to the preset clip1. (in this case most of my images will be of this format).

  If I do not make any changes to the elongation of pixel (using the Interpret Footage) the result is that the letter boxing serves around clip2. It is acceptable but not ideal.

  Can I change the format of clip2 pixels so that it is the same proportions as clip1? If I do this but I don't eventually clip2 distortion? What would be a worse result than the current situation with letter-boxing.

  Can someone advise; is it possible to merge these elements from two sources into a single output seamless file?

  With our thanks

  -Justin Wyllie

  Justin,

  If the IRON Clip 2 (size of pixels) is correct, i.e. the film doesn't look like stretched or squeezed, I wouldn't do any adjustment to that.

  To reduce or completely remove the black borders around it, you can adjust the fixed effect > Motion > scale, to fill the large size of the frame. Note: due to the difference in image format, to fill the full scope of the project, you will be actually reframe some of top and bottom. Using the fixed effect > Motion > Position, you can adjust exactly where culture goes, say all high, or to all of the background, or by a different ratio of high & low. This choice must be based by the framing of the topic in Clip 2. This choice is yours.

  Note: when scale upwards, quality will decrease, but maybe not too difficult to use only images, but the decision is yours also. There are several programs, and some that are plug-ins, this top-floor a little better than the Motion > pre scale. I would investigate those. One Magic Bullet Instant HD Red Giant, was used by many, even if some users were not enough to buy the pleasure. Just something to consider.

  Good luck

  Hunt

• Make VMOTION on a different server with different, example HP and DELL

  A colleague asked me a strange question of VMOTION, you can go,

  You have HP DL380 G5 and a DELL Power edge 1620 (or anything) in a cluster as ESX host. Now if I want to use VMOTION between these two servers, should what precautions I take?

  Please let me know because I have never tried as we all HP inside the VC as ESX Server.

  Thank you

  Anky

  There is no vMotioning fast problem between different manufacturers of servers - Andre's notes it is critical CPU compatibility - so if Dell and HP servers have the same processor (or family) that vmotion will work

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Make a Menu with options for audio different paired with different video

  Hello

  I was wondering if someone could provide assistance for the creation of a DVD menu with yet. I want to create a DVD menu that gives the user a selection option of the video background (choice of 3 or 4 videos) and then he would go to another menu of Option that would allow them to choose the sound to play while observing that chosen video (to choose among 4 different audio options).

  The idea is that someone can put it in the DVD and Menu guide them through the viewing experience. First, they could choose to look at the type of video as river ocean (a) (b) (c) whatever and then also have an option to choose which sounds to hear everything by watching this video named (one) guitar classical music (b) (c) any other audio

  I would like to then the selected VIDEO and AUDIO selected to be paid in loop/repeat mode to run continuously.

  I would REALLY appreciate help if someone could let me know how to do, or to provide a model if they have one, or a tutorial on how to do it using Adobe Encore.

  Thanks a lot for your time!

  Marc

  Basically, what you want to do, it's four (for example) have a calendar on your main/menu selection screen. This will lead to an Audio selection Menu, allowing the user to choose the Audio main or additional. I forgot the number of additional possibilities of Audio tracks on a timeline, but I think that you can have up to eight (8), but you may wish to check this. This ARTICLE link should provide you with this info. Choose the button will link to the timeline proper w / the selected Audio track. Note: Make sure that your Audio is EXACTLY, or very slightly more short, as your video. End action of timeline will connect on itself.

  Be sure to set the distance of appropriate title to your Menu, so that the user can exit the loop, without having to stop and then start again. Not sure if you do not want to get to the Menu selection screen or Audio selection Menu, but it's your decision. You can even choose to do Menu principal w / instructions and only one button, to go to the scene selection Menu.

  Good luck

  Hunt

• How can synchronize 2 direct vms with different ip address

  Hello

  I have a question I have 2 virtual machines, their data are exactly even now I want to know is there any wany to synchronize their data?

  I don't want to use VR because vr can't the VMS syn 2 which turn on it just can make a sgadow of the one on the host of othe

  now I want to have 2 virtual machines with different ip address, and in time, they can synchronize data

  Best regards

  Babak

  There are no methods that can be used that will do what you are trying the hypervisor layer.  It will be done in the comments.  I would recommend for your machines two windows RoboCopy, and for your two Linux guests recommend Rsync.,.

  There is not much more that we can really say here, that you excluded the VMware replication as your need to have different IP addresses in the two guests.

• I accidentally lost some jpeg files using movement and replace the function when transffering in a new folder. Where will the replaced files?

  I moved some images in a folder, some of the images already in the folder had the same name as the new scanned images IE 1 Scan, Scan 2 etc. I used the move and replace the folder without thinking that I was in a hurry. I still need replaced images but now I can not find them I thought that they would have ended up in the trash, but they aren't there?

  You can download some like this free data recovery software to recover deleted files.

  1 panda Recovery http://www.pandorarecovery.com

  2 recuva http://www.snapfiles.com/get/recuva.html

  3. undelete more http://undelete-plus.com/

  How does it work?

  When you delete a file on the FAT32 or NTFS file system, its content is not erased the disc, but only the reference to the data file in the file Table of Allocation or the master file Table is marked as deleted. This means that you might be able to recover files deleted, or to be visible through the file system again.

• How to proper resize images and videos when running without loss of quality?

  Hi guys. I need a little help here.

  I built a flash site, in which I want to resize a movie to the scene. I do it by keeping the proportion, so I just resize the width and then I resize the consequence of the height to the width of new but keeping the proportion.

  The problem is that my film looks like he "pixeled".

  I found a site on which the stage is resized dynamically with the movie and the background images without any of their loss of quality. So far, I knew that resize pictures or videos in flash for the creation or the runtime environment produces results pixeled.

  This is the site: http://kampanjeweb.apt.no/jotun/romforrom/. Can someone tell me how they do without quality loss? Just make the browser in windowed mode and resize the margins to see the effect.

  Thank you.

  Hello, Venian.

  On the video, you can try setting the smoothing of the flash.media.Video on TRUE property. This should keep a quality, but you can do nothing if the video has a bad quality. You need a great video.

  On the images, you you need to redraw the image whenever you resize. To achieve this, use a combination of Bitmap, BitmapData and Matrix classes. No doubt, just call again. Here's a simple example:

  var scale:Number = .5;
  var highQualitySourceImage:Bitmap = ...your image...;
  var scaleMatrix:Matrix = new Matrix();
       scaleMatrix.scale(scale, scale);
  
  var bitmapData:BitmapData = new BitmapData( scale*highQualitySourceImage.width, scale*highQualitySourceImage.height);
       bitmapData.draw(highQualitySourceImage, scaleMatrix);
  
  var finalBitmap:Bitmap = new Bitmap(bitmapData);
  
  addChild( finalBitmap );
  

  See you soon,.

  CaioToOn!

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• Need help with Windows Live Movie Maker and DVD Maker

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  ===============================================
  First of all a question... did you you save the project in a video such as format
  . WMV or. MP4? Or have you just of WLMP project folder?

  I suspect that DVD Maker is to see your movie in one file
  and he has no idea where are your scenes. More than likely it is
  creation of scenes on his own in arbitrary places.

  In order for DVD Maker correctly, identify individual scenes
  each stage must be registered as an individual video clip, then
  the collection of video clips can be imported and each of them must
  become an individual scene.  DVD Maker is supposed to accept
  up to 18 scenes.

  Just an experience you can import your new original
  video clips in DVD Maker and see if it works properly. If
  It does what you want... change and re-record your clips one video
  both will be the fix.

  Good luck...

• I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  You need to install the library separately:

  http://helpx.Adobe.com/Encore/using/download-library-content.html

• How to update AND move between platforms with different Endians...?

  Hi all
  
  I have two databases - a 500 GB - and the other 50 GB running on 10.2.0.4 on AIX 64-bit. They are Production systems.
  
  I have to move them to a new Linux (RHEL 5.6 - 64-bit) server that will run 11.2.0.2.
  
  For the test, I'm OK with what is done with Data Pump. But for the passage be made to the "new Prod", this will result in the value of the hours of downtime and it is a critical system, so I will try to mitigate that as much as I can.
  
  Naively, I was hoping to use RMAN to both move the databases from one box to the other, but also to upgrade. I say to myself that I would do the following (as directed by Metalink 369644.1) I have a catalog of recovery, etc, etc:
  
  Install the binaries on the server of new Prod
  Connect to the RCAT, and restore the database and recovery of a pit
  To upgrade the database manually by putting the DB in the UPGRADE to STARTUP and running of the catupgrd.sql
  
  Unfortunately, I didn't know that the Endian differed between AIX and RHEL (according to 1079563.1). Oops.
  
  It's not like I'll be able to use Transportable Tablespaces (according to 243304.1) or without having first to migrate the data through a 10 DB g and then upgrade.
  
  So my options seem to be:
  (a) data pump and suck the failure
  (b) move the portable data using Tablespaces to 10.2.0.4 and then switch to 11.2.0.2.
  
  Are there other options? I hope that a logical standby would work in this case to the rolling upgrade, but suspect that the different o/s AND the different Endian would sabotage the idea...
  
  Mark

  Maybe, I have more experience using concurrent export/import using the traditional exp/imp utility that using the parallel option on expdp/impdp. One thing you can do with exp/imp you can't do with expdp/impdp is export to a named pipe, start a remove copy channel named on the new server and then start the import from the channel named on the new server so that you import all still exporting the same objects. We use tables = exports when we did back when the tables = parameter could handle only 99 tables. We had a separate export for each table and then a set of exports to 99 tables for each of the other tasks run simultaneous processes of 6 to 12.

  One thing to look at is data history. Potentially some tables can be moved before the majority of the application objects and replaced by the synonym to remote objects.

  Really static tables could also be moved beforehand, even only a day or two before reducing the number of objects to move.

  Build the new database in noarchive log mode to save a treatment and he switch and immediately save when you migrate.

  And Yes, if the two platforms appear in the name of the view I gave you so you can use transportable tablespaces with the rman conversion step. Instructions for use rman to perform the conversion are in the manual of rman.

  HTH - Mark D Powell.