Make VMOTION on a different server with different, example HP and DELL

Similar Questions

• VCB to backup server with HP's Eva and Dell AX4 storage systems

  I have two storage systems connected to a backup server. It is installed on Windows 2003 Server x 64 PowerPath5.2. Windows see each storage only once, so I think that multiple paths to the storage works correctly. Whenever I try to start to browse (or start the backup operation) a VM on HP Eva everythink is ok, but for the VM on AX4 I recive error message:

  Error: Cannot open the disk blklst

  :/ / snapshot-2627 [VRAID5_1, 43TB_datastoreDell3] PLBOLFS01/PLBOLFS01.vmdk@plbolvc:

  443? xxxx/xxxx. Could not open the file on disk: error: Disk library failed (can't access

  a SAN/iSCSI LUN support this virtual disk. (Tip: If you use vcbMounter y)

  or may use the '-m ndb' option to switch to disk based network access if it

  you want.) If you were trying to access at the file level, stop the vmount served

  this by typing "net stop vmount2" in a command prompt to force vmount to re-scan f

  or SAN LUNS and try the command again.). Cannot open ' blklst://snapshot-2627 [VRA

  [ID5_1, 43TB_datastoreDell3] PLBOLFS01/PLBOLFS01.vmdk@plbolvc:443'. Conf OMIS

  Figure scsi0:0 of disk.

  An error has occurred, cleaning

  ...

  D:\mnt\PLBOLFS01 deleted directory

  PrepareForBackup() failed to prepare PLBOLFS01 for backup, returned the error 1

  The external command failed. See the above error.

  Exit code: 1

  What can I do with it?

  VCB Version 1.5

  Next step would be to check a second time your zoning and lun masking. There could be a conflict with the various mpio drivers between eva and the clariion. I would try to remove all mpio drivers too.

  Dave

  ************************

  If the automobile had followed the same development cycle as the computer, a Rolls-Royce today cost $100, get 1 million miles per gallon, and explode once a year, killing all the world inside.

  Robert X. Cringely, InfoWorld magazine

• VMware HA with 2 x ESXi and Dell MD3000i?

  Hi all

  I have a task at hand to set up with VMware HA.

  What I've done so far,

  (1) to this end, I have 2 identical Dell PE 2950 servers and Dell MD 3000i as storage device.

  (2) installed ESXi 4 in servers (ESXi1 and ESXi2) and configured the static IP.

  (3) I configured the iSCSI SAN (MD3000i) and created the host (VMHA) group.  Added the two hosts in the host group

  (4) virtual disk created, which will be shared by both hosts and it mapped to the host group.

  I know how to install vCenter and how to create the HA cluster as well as adding guests inside.  But before that, I have a few questions.

  According to the theory the shared storage must be accessible by the two hosts.  How can I add storage shared on SAN in the hosts.  I know that the navigation, but miss me the theory somewhere.  I added shared as Datastore2 and ESXi1 and formatted with VMFS3 storage.  Now how could I add the same storage shared in ESXi2?  When I tried to add, the steps asked me to format again shared storage that I can't do?

  Thank you all for all the remedies fast

  Nadine

  You analyze it again on the second (and subsequent).   Add the that storage is being used on the first host.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Make ESXi appear as a server with a mac and several base10 IP

  I have a few on my network restrictions that force me to use a specific MAC address, although I ask several base10 IP to point to it.

  First of all, is it possible to set up ESXi so he IP addr-based NATs everything behind a real physical MAC and forward for virtual hosts?

  If not, is it possible to put in place a more classic NAT where I redirect ports on a true IPv4 ports on a virtual internal network?

  Google searches increase for most of those who want to do those things within their virtual networks, so I had trouble finding examples of this configuration.

  ESXi does not include services originating or a firewall for virtual machines.   One option is just to expose a single VM to the Internet and it would provide the services of your firewall.   But this creates a problem with management of ESXi.  With patch for example, you will need to stop all your virtual machines, which means that you would have access to your ESXi host (say the virtual machine provides VPN services) from a remote location.

  You would be better with a firewall device hardware before the ESXi host and your virtual machines.

• can not make or produce the clip modified with dark tones / highlights and reverse

  I can not make or produce a clip that has been modified with the shadows / highlights (smoothing time, black, white clip) and reverse with speed / duration.  When you try to make I get an error.  No number it says only: order and error.  If I try to produce the video, it starts to run and then I heard a sound that resembles a goat and the program stops.

  Clamp reversed, nest, and then add the effect or v.v.

  See if this will help.

• I have only 2 IP address, how do I set up a server with 1 Ubuntu ESXi and 1 Win2003 VM?

  I have only 2 IPs for 3 systems: an ESXi server and two virtual machines on it.

  How to set up so that I can access remote systems 3?

  Thank you!

  ESXi does not include a firewall.  It uses a reverse proxy to filter incoming connections to the various services running, but it doesn't have the ability to pass this traffic on virtual machines.  Unlike VMware Workstation or Server, ESXi is designed to separate virtual machines hosted on it.

• How can I make multiple copies of a text with my desktop Windows Vista/Dell computer?

  I asked a simple question; Why is it so hard to answer?

  Please clarify what you mean by "making several copies of a text".  Please site an example of what you want to accomplish and we'll go from there.  Thank you!

  Here is the message I want to distribute paper copies to the members of a group called seekers of Justice, some of whom have no computers:

  "Please attend the next meeting of the seekers of Justice, which will take place next Friday, when we discuss topical issues".

  I know there's a way relatively simple I should be able to do but am confused so far. Would appreciate your help. Norm Williams

  Have you considered connecting a printer all-in-one to your computer > right click on the message > click on print > the next area you will be asked "how many copies '...

• Nothing to do with the DIR - 655 and Dell Wireless 1505 PCI Mini Card router

  Hello, I'm struggeling with my new Latitude D830 and the Dell Wireless 1505 Draft 802.11n WLAN Mini Card. It won't connect wireless to my D - Link DIR-655 router.

  I am now running Vista, but I had the same problem on the same computer with Windows XP.

  I have set up my network with WPA2 only and mode mixed ng. I have 3 other computers on the network who have no problems.

  When I try to connect, I see the network at full power and I am prompted for the password. He responds with "Windows is unable to connect to..." ». When you try to diagnose it, he tells mark that "Windows has no recevice any response from the wireless router. In the event log, I found "status of the Association: Fail code reason for 0 x 00038002 0x00000002".

  Can anyone help?

  Erlend

  
  

• Does anyone know how to make the site in different languages?

  Does anyone know how to make the web in different languages? and how to make the menu appear on the master page in the target language?

  Hello

  You must create the page content in languages that you want and then bind using the options in the subfolder on root of the hosting platform.

  More details:

  http://forums.Adobe.com/message/6065652#6065652#6065652

  For the menu, you need to create different masters, and then apply on the pages.

  Thank you

  Sanjit

• Using smart Windows Server with Perc 6i

  Hello everyone,

  I learned to put in place a health check on our server with a Perc 6i and after a long search without usable result I ask in this forum.

  Y at - there a Posibility to use the smart feature on Windows Server 2008 r2 and Perc 6i?

  If you would like more information, just ask.

  Thanks in advance

  DOM

  Yes, both of these tools have a CLI, so you can make scripts, here is the manual of the CLI server administrator as is the monitoring tool.

  FTP://FTP.Dell.com/manuals/all-products/esuprt_electronics/esuprt_software/esuprt_ent_sys_mgmt/Dell-opnmang-Srvr-Admin-v7.2_Reference%20Guide_en-us.PDF

• Cloning by rman on a different server with the directory structure different and different DBNAME in EBS 11i using quick Clone

  Hello

  We want only DB (not apps) cloning through PROD rman, step TEST EBS 11i using quick Clone without taking downtime of PROD (i.e. No. BKP COLD).

  Source and target are on different servers, different file structure and the different database name.

  Kindly let me know the detailed procedure?

  Kind regards

  RR

  
  

  You can use this simple method that I am.
  

  
  

  Take backup of production with rman:

  {

  overlap archivelog all;

  backup format compressed backupset database tag PROD_FULLBKP ' / u10/PROD1_L0_BKUP_20131125/PROD_DB_set%s_piece%p_%T_%U' filesperset 15;

  SQL 'alter database backup controlfile to trace. "

  SQL 'alter system switch logfile;

  SQL 'alter system switch logfile;

  SQL 'alter system switch logfile;

  overlap archivelog all;

  backup as compressed backupset archivelog all delete input PROD_ARCHBKP format tag ' / u10//PROD1_L0_BKUP_20131125/ARCH_PROD_set%s_piece%p_%T_%U' filesperset 20;

  backup format ' / u10/PROD1_L0_BKUP_20131125/PROD_ctl_%T_%U' current controlfile;

  }

  
  

  Move the backup on the test server:

  SCP /ftp

  Modify the pfile to the test server:

  Parameters such as:

  db_name

  control_files

  modify the pfile to match the location of the test server

  Add this parameter

  db_file_name_convert = ' / PROD_datafile_location/datafile ', ' / test_datafile_location / data ', ' / PROD_datafile_location/tempfile ', ' / test_datafile_location / data.

  log_file_name_convert = ' / PROD_redofile_location/ONLINELOG ', ' / test_redofile_location / data ".

  Start the DB:

  Start the db in nomount:

  startup nomount.

  Connecting to rman and start to restore:

  Auxiliary RMAN.

  RMAN > run

  {

  allocate auxiliary channel a1 device type disk;

  allocate auxiliary channels a2 device type disk;

  allocate auxiliary channel a3 device type disk;

  allocate auxiliary channel a4 device type disk;

  data duplicated in the PREPRODUCTION backup location ' / u10/PREPRODUCTION/oraR12/clone_backup/PROD1_L0_BKUP_20131125 ";

  }

  OR

  If you specify time/perform a recovery of time based, like below:

  RMAN > run

  {

  allocate auxiliary channel a1 device type disk;

  allocate auxiliary channels a2 device type disk;

  allocate auxiliary channel a3 device type disk;

  allocate auxiliary channel a4 device type disk;

  data duplicated in PREPRODUCTION backup location 'LOCATION_OF_BACKUP', until ' TO_DATE (7 July 2012 09:45 ',' DD/MM/YYYY HH24:MI:SS') ";

  }

  Concerning

  Karim

• Establishment of a physical standby on a server with a different structure

  I'm having some trouble putting in place a database of physical intelligence.
  
  The main database has a different naming structure the day before and they are on different sites.
  Physical is/var/hpsrp/ctrorp03/oradata/u0x / < DB_NAME > / < DB_UNIQUE_NAME > and Eve is/var/hpsrp/drforp03/oradata/u0x / < DB_NAME > / < DB_UNIQUE_NAME >.
  
  I put db_file_name_convert '< MAIN path >', '< PATH of EVE >' multiplied by the number of paths in the form of pairs.
  I created an empty database for the day before and after taking a full backup of the primary with the control file and the control file ensures.
  
  Now, I touched the issues:
  The incarnation of DB numbers are different.
  When I try and do a normal restore for example set dbid, restore controlfile; Mount; It fails as it tries to find files in the primary structure and the structure not to sleep.
  When I try to rename via set newname or auxname it can't find files to restore I guess because of the id of the incarnation
  If I put the id of the incarnation and try to restore backup it fails as an identifier of the incarnation do not match.
  
  I have tried looking through various forums and documentation, but impossible to find a solution, probably can't see the forest for the trees well because there are so many things.
  
  Someone there done that type of configuration before and can give me some advice?

  Ok

  What I consider 'sleep data by is an active database with RMAN'

  http://www.Visi.com/~mseberg/standby_creation_from_active_database_using_rman.html

  The thing with your is the location of your LOG files and DATA.

  Where are they now?

  Where they need to be on standby mode?

  Note that this method use a SPFILE so that the settings are made to change the location of the files.

  If you do it right the order is as simple as

  $ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
  
  RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
  

  Also I and others trying to help you do it for the points. Marking of some of these useful tells us that we are really helping and not only to waste time.

  use

   followed a few lines later with 
  

  change the CODE to the code and to everywhere in between.

  Best regards

  mseberg

• ESX server with 2 different storage array?

  Hello.

  I currently have my ESX servers connected to storage DS4700 and most berries.  Each ESX is double path via a switch which, in turn, allows me to see my DS4700.  My question is, can I i the area my ESX Server so that it can "see" my DS8300 and I would be able to assign LUNS of my ESX servers with no problems?  Both can coexist?  I think I should use for my DS4700 host bus adapters and host bus adapters that are dedicated to my DS8300?  A UNIX point, these 2 storage arrays do not 'communicate' the same way (for example, SDD and RDAC).

  Thank you.

  Steph

  SDD driver is for the multipath. VMware has its own multi-channel driver that is shipped with ESX server, you won't not any 3rd party multipathing software.

  In any case to be abel to see camps Bay you have no need to activate the software multpathing. It is intended only to provide a redundant path to any logical unit number hosted by a single table through several MS SPs/Ports.

  Area just for DS8300 ESX Server and a new analysis should see the new targets and when you present LUNS to your host definetion analyze again another you should see the DS8300 LUN.

  I hope this helps.

  -Surya

• VMotion between 2 different processors from intel

  Hello

  I was wondering if its possible to make of switched on vmotion vms between a host DL380G5 with X 5460 3.16 GHz CPU core quad AND a DL380G6 with X 5570 quad core CPU?

  I have a cluster with 2 x dl380G5 with x 5460 CPU and 2 x new dl380g6 to the clsuter with processors x 5570, I've not yet deployed these 2 and wanted to know if vmotion is possible through these 2?, the following vmware link describes this but is not quite clear to me:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1991

  See "INTEL CORE CPU" Group C and D maybe?

  See you soon.

  Andres.

  Take a look at http://kb.vmware.com/kb/1003212 (support enhanced VMotion compatibility (EVC) processor)

  Also, make sure that you understand HA when you use different hosts in a cluster. See http://www.yellow-bricks.com/vmware-high-availability-deepdiv/

  André

• It's my first Siu of this system, so I want to make some friends from different countries, how do?

  Original title: help

  It's my first Siu of this system, so I want to make some friends from different countries, how do?

  Hi hangfenge,

  The purpose of these forums to answer is to help people having problems with their computers and the various products we cover here - it is not a place for personal conversations in order to make friends.

  To do this, I would say something like Facebook: http://www.facebook.com/ or among the multitude of alll chat rooms available on the web.  Here's a search that can help you find a: http://www.bing.com/search?q=chat%20rooms%20online&PQ=chat%20rooms&SP=2&QS=AS&SK=AS1&sc=8-10&form=BB07SS&pc=BB07.

  If you have problems with your computer or software, can find here appropriate forum and ask your question and someone will be happy to help you.

  I hope this helps.

  Good luck!