DVD to eject on the Studio Hybrid

Similar Questions

• DVD stuck in the Studio Hybrid?

  I tried to burn a DVD and insert a blank disc, but the player would not recognize it. I hear that the Player keeps trying to read. As you already know the eject button on these hybrids studio never work properly. So I tried to eject using a right click in Windows Explorer (on Vista), but only thing happened the Explorer crashed.

  After trying several times I wanted to restart and see. However then it stopped starting upwards. The progress bar from Microsoft comes and then I get a blank screen. The DVD player can cause anything like that?

  I thought to open the machine and trying to manually release the DVD. Don't you think it's possible?

  Any help is very appreciated. As I said, it is a hybrid of Studio with Vista on it.

  Thank you!!!

  It's so old, but this is the file that you, boys need - it's the "Intel DELL0100 proximity sensor Driver (ACPI). When you install it should work your eject button. Maybe someone else who still use this old ball over time will benefit after their 10 windows upgrade.

• DVD PLAYER CAN'T READ DVD MEDIA IN THE STUDIO HYBRID DESKTOP

  You will appreciate the help a lot about this question. I have the desktop studio hybrid 140G. For the past few weeks the cd/dvd drive rom played inconsistent dvd media files. But since last week it has completely stopped playing DVD media. Although it opens the audio cd and dvd software installation files. I updated the dvd player but the problem persists. On the control panel if I check the current status of the dvd player, it shows - works correctly. I am running windows vista and the cd/dvd rom drive is TSSTcorp DVD +-RW TS - T633A ATA Device. Hopefully, there is a solution for this that I am running out of ideas. I run Dell diagnostics. in the end, it's show "a few problems identified but diagnosis impossible to find a solution; No DVD disc not recognized. "

  Hello

  You can run the tool the following data section and check if this is useful.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The maximum size of HDD for Studio Hybrid D140G

  What is the maximum hard disk supported for a Dell Studio Hybrid D140G? I want to replace the current (160 GB) drive with something like a 1 to. Any suggestions?

  Hi fpliptak,

  The Studio Hybrid D140G has a SATA controller and support all portable HDD (2.5 ").

• Iconia W3 Recovery DVD could not perform the complete installation

  Hi, my Acer Iconia W3-810 comes with a recovery DVD. When I try to reinstall Window 8 on tablet PC using Acer recovery media, he could not complete the installation. The system of updating the restore process finished about 33% before moving to 100% and DVD was ejected from the car. There is no place to put the product key or any other information. Windows can be started with very limited after the installation functions. There are no wireless devices. Does anyone know similar problem and how to fix it. Thank you.

  Well I don't know that the recovery CD has all the special Intel drivers. Once you start, it may be necessary to run the package of pilot to support.acer.com for your table in order to restore the additional drivers.

• No ejection of the DVD/CD of E420s drive!

  I've tried everything! The stupid thing is not to eject the DVD I put in it. I installed the utility, eject ODD and I can't even this program to run without talking about my drive to eject. I also read somewhere that there is a force eject in the BIOS and is not found. I tried hitting eject in Windows and that no longer works. Looks like he's trying it just fails...

  Help?

  I found the problem when I called tech support and they said that it is usually a software problem, not a hardware problem.

  Started Ubuntu from a flash drive and could pop the DVD in and out throughout the day.

  I went back to my windows and tinkered a bit and figured out every time that the DVD was stuck in there, all I had to do was stop explorer.exe and restarting and the DVD can be skipped. So I reformatted my HARD drive and now works perfectly, always. It was just on the seedy Image of Lenovo that it comes with.

  Who can I call to report this? The generic support of Lenovo?

• Studio hybrid with the problem of resolution LCD TV (HDMI)

  My Studio Hybrid has arrived today. I plug it to my LCD TV (Philips 42TA2800) via HDMI.

  The TV has proposed a recommended 1360 x 768 resolution. The problem is, I couldn't find this resolution under the video control panel. The PC tell me that the optimal resolution is 1900 x 1080, but when this resolution is set, the edge of the desk is not seen (beyond the coverage of my TV). The best resolution I can put is only 1600 x 900, which leaves a black border around the desktop computer.

  One thing, I see that the TV shows 1080i on its screen when I first start the PC and boot Dell log fills all TV. But once the Vista is loaded, it leaves the border around the Office under the resolution of 1600 x 900.

  Pls advice. Thank you.

  
  

• Error code 19. Drive CD-ROM/DVD-Rom Dell studio hybrid.

  "Windows cannot start this h/w device because its information of configuration (in the registry) is incomplete or damaged."
  Seen 'Spirit X' answer on the forum and run 'Mr Fixit' article id ref 314060 claiming to have fixed it but problem persists!

  Hello

  You did ALL this as suggested? Please restart at the top and working down the list, as is often
  the set of operations that solves the problem.

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• DVD tray opens on the Satellite C650

  Hello

  I'm sorry if this question has been posted before, but I can't get my DVD tray to open without having to stick something in the small space. When I try and open it normally, a little light beside the button just flashes orange.

  How to solve this?

  Thank you

  Is a CD or DVD inside when you try to open it?

  Almost every player's EJECT open the optical disc drive. Have you tried to use this option in your favorite player? It works correctly?

• Recording on DVD - "Unable to retrieve the table of contents" error

  Hi all

  Whenever I try to record on a DVD a face "could not retrieve the table of contents.

  I tried to change the recording speed, but no use.

  When I go to properties of DVD and click on activate record it does not recognize the DVD or any CD in the drive.

  Please help

  Hello

  1. what software to use to burn cd/dvd discs? Try using Nero, Ashampoo burning studio, alcohol CD and DVD software of engraving,
  2. then, I advise you to use high quality as TDK or Verbatim media.

  3
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait for the CD/DVD drive would appear once again

  If your problems persist, there may be a problem with your cd/DVD-ROM

• Satellite Pro L500 - DVD player eject when I put in any disc space or used

  When I put a cd/dvd virgins or used original or copies, ejects all the time
  pilot is underway
  in peripheral said properies works well
  How can I fix it?

  Please help me solve this problem, as it happened is that after 2 days of my warranty expires [1 year]

  Can you please explain what it more detailed?
  I mean when you close it is ODD that happens immediately or after some players starting?
  Is there a reaction of ODD? ODD tries to read the disc?

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps

• drive DVD - auto eject tray

  Hello. I had this problem for two weeks. While working on my laptop, the DVD tray ejects automatically out. There is no disk/cd player. And it happens randomly. I tried to reinstall the storage driver, but it worked as well. Please help me with an effective solution.

  Hi Samadhi,

  Welcome to the forums of Lenovo.

  As per the request, we understand that you are facing problem with auto tray to eject DVD drive in your laptop.

  Please start the system BIOS and check for the issue and also trying to boot into safe mode and check the number.

  Check if the drive is installed. Also try reinstalling the driver and check the issue. Please share the model number we can provide the link to the driver.

  I hope this helps. Post back if the problem persists!

  Best regards

  Ashwin.S

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I use a dvd - r disc, but the movie maker says is not a recordable disc

  I use a dvd - r disc, but the movie maker says is not a recordable disc. also, when I try to publish the dvd is not the choice, her computer, a recordable cd or camer digital video...

  If you're running Vista Home Premium or Ultimate...
  the following article is perhaps worth the drive... If not...
  You'll need to publish (your Movie Maker save project)
  in the. WMV video format and the use of third-party software
  to burn your DVD.

  "Import files into Windows Movie Maker" "publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html
  Scroll down to: "2 to publish and burn a movie to a DVD")

  If you need DVD Authoring software... What follows
  freeware software can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.