Iconia W3 Recovery DVD could not perform the complete installation

Similar Questions

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

  Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?

  Please answer with repair options and details on where to go to get there.

  If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• ExtendScript: Could not perform the Action, because the destination folder does not exist

  "Adobe Photoshop (CS 6 on mac): use Extendscript (below) to convert in a .png .psd file size.

  "Save for web error: could not perform the Action, because the destination folder does not exist. Can anyone help?

  I am trying to convert the image size of a record of entry into an output folder:

  #target 'photoshop '.

  var outputWidth = 1024;

  var inputFolder = Folder.selectDialog ("input file");

  var outputFolder = Folder.selectDialog ("output folder");

  If (inputFolder! = null & & outputFolder! = null) {}

  var file = inputFolder.getFiles ("*.psd");

  for (var i = 0; i < files.length; i ++) {}

  var file = files [i];

  var doc = app.open (leader);

  If (doc.width > outputWidth) {}

  var height = (doc.height / doc.width) * outputWidth;

  doc.resizeImage (outputWidth + "px", size + "px");

  }

  var options = new ExportOptionsSaveForWeb();

  options.format = SaveDocumentType.PNG;

  Options. PNG8 = false;

  doc.exportDocument (outputFolder, ExportType.SAVEFORWEB, options);

  doc. Close (SaveOptions.DONOTSAVECHANGES);

  $.writeln('File ' + (i + 1) + "" + files.length + "transformed");

  }

  }

  I added a few comments, I hope this helps...

  #target "photoshop"
  var outputWidth = 1024;
  var inputFolder = Folder.selectDialog("Input folder");
  var outputFolder = Folder.selectDialog("Output folder");
  var startRulerUnits = preferences.rulerUnits;
  //make sure you are working with pixels
  preferences.rulerUnits = Units.PIXELS;
  if (inputFolder != null && outputFolder != null) {
      var files = inputFolder.getFiles("*.psd");
      for (var i = 0; i < files.length; i++) {
          var file = files[i];
          var doc = app.open(file);
          if (doc.width > outputWidth) {
              var height = (doc.height / doc.width) * outputWidth;
             /*  doc.resizeImage(outputWidth + "px", height + "px"); */
             //only one value is required
              doc.resizeImage(outputWidth, undefined, undefined, ResampleMethod.BICUBICSHARPER);
          }
          var options = new ExportOptionsSaveForWeb();
          options.format = SaveDocumentType.PNG;
          options.PNG8 = false;
          //get the filename without the extension
          var Name = app.activeDocument.name.replace(/\.[^\.]+$/, '');
          //build up the output file name and path
          var saveFile = File(outputFolder + "/" + Name + ".png");
          //you need to have a full filepath not a folder
          doc.exportDocument(/*outputFolder */saveFile, ExportType.SAVEFORWEB, options);
      doc.close(SaveOptions.DONOTSAVECHANGES);
          $.writeln('File ' + (i + 1) + ' of ' + files.length + ' processed');
      }
  //restore ruler units
  app.preferences.rulerUnits = startRulerUnits;
  }
  

• Creation of DVD could not decode the files

  Hello world. Another new guy!

  I also discovered DVD Maker. But I had all the problems in sucsession. First creation of DVD does not recognize the files, but with the help, as I arrived here, I overcame. Then, he did not find the DVD burner, but you guys saved me once again on this one. Now, once I have start burning .avi on DVD, after 1% weird files, it gives me a biggie, saying that one or more of the files that have been added can not be decoded properly. I know there are other people who had simmular problems, but I'm still at a loss. I have download a codec (just the codecs) package to solve the original problem, I myself for example not recougnizing files in the first place. I thought that would be enough.

  Please someone save me! :-) . I'm SO close from there...

  Hello

  Method 1 : give the Movie Maker clearly run by temporarily disabling all startup programs and Services of third party (non-Microsoft).

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Method 2 : try the system restore and the System File Checker program.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Method 3 : you can also install a codec pack and check if the problem is solved or not.

  http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm

  WARNING of THIRD PARTY SOFTWARE : Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also, check out the following links and see if the problem is resolved or not.

  DVD encode - comes in at 98.9% burned, then fails
  http://www.windowsdvdmaker.com/forums/thread/136.aspx

  Vista - creating Windows DVD fails at 99%
  http://www.Vistax64.com/Vista-music-pictures-video/198083-Windows-DVD-Maker-fails-99-a.html

  Do you have enough space on the DVD for the file, and you have the same amount of free space on the hard disk for the temporary work files (maybe even a little more)?

  This is a FAQ on the Codecs it's Vista related and interesting to read.

  Windows Vista codecs
  http://www.Windows-Vista-update.com/Windows_Vista_codecs.html

  Hope that helps.

• sfc/scannow error message - "Windows Resource Protection could not perform the requested operation".

  Recently, things are held in my computer after trying themes. I don't know what I fiddled with, but I do know something ExplorerFrame.dll in system32 and sysWOW64. I've tinkered with it to try to change my navigation settings. (The arrows in windows Explorer)  I don't know if that's the problem, but my main problem is when I try to save anything, or "save under" or try to save anything even in microsoft word or adobe reader, none of the folders in my navigation pane is there! It's just empty! I tried to solve this problem with sfc/scannow, but the message that I put in the title appears when it reaches 10%! I've tried everything literally! I tried running sfc/scannow offline, and it comes up with a message 'Protection of resources Windows could not start the repair service.' I also tried to check in my services to see if the Windows Module is manual in the startup type, and it is! The last thing I could think that I tried was the start in safe mode with command prompt, and it still does not. If anyone can help me, please! I've tried everything! * I forgot, I have try running CMD administrive rights, still won't work *.

  Thank you for the help, but I figured it out by myself. I replaced the old version ExplorerFrame.dll in system32 and sysWOW64 folders to a new! I managed to do it by copying the correct files to another computer and replacing them with the 'old' I have fiddled. Thanks for your help!

• Could not access the Windows Installer service

  I am tring to install .NET Framework 2.0 and windows gives me an error saying that my Windows service install could not be accessed

  I'm tring to appear on an error message received when I tried to download .NET Framework 2.0 it says could not access windows service install and I need this program to the someone can help?

  Hello
  1. are you able to install other programs?
  
  This problem may occur if one of the following conditions is true:
  1. the Windows Installer files that are on your drive hard are missing or are damaged.
  2. you install or remove a program that uses the package file to install software for the Microsoft install (MSI) Windows (.msi).
   
  To resolve this problem, use the following methods.
  Method 1: Reregister Windows install.
  1. Click Start, type cmd, right-click on cmd, and then click Run as administrator.
  2. at the command prompt type msiexec /unreg and then press ENTER.
  3. at the prompt, type msiexec/regserver, and then press ENTER.
   
  Method 2: Disable the .NET Framework 3.0 before installing .NET Framework 2.0
  Microsoft .NET Framework 3.0 is the default version built into Windows Vista. We recommend that you first cross check if it is enabled in the Windows features turn on or off. To do this, try the following steps.
  1. click on start, type optionalfeatures and press to enter.
  2. in the verification of the list if .NET Framework 3.0 is enabled or disabled. If it is enabled, disable it and restart the computer.
  3. install .NET Framework 2.0 and check the result.
   
  Method 3: Install the latest .NET Framework.
  1. visit the following Web site and download the latest version and install it.
  http://go.Microsoft.com/fwlink/?LinkId=120486
   
  For more information, see this link: http://support.microsoft.com/kb/942288
   
  NOTE: Don't forget to follow method 2 to activate the .NET Framework.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• "WindowsUpdate_80070641" "WindowsUpdate_dt000"_"WindowsUpdate_00000641" "WindowsUpdate_dt000" __Windows could not start the Windows Installer service on computer local error 216:0xd8

  I have a 64 bit Windows 7 PC and cannot install updates.  Here are two screenshots.

  One contains two error message that I get when trying to update

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"
  "WindowsUpdate_00000641" "WindowsUpdate_dt000"

  The second erorr is what I get when you try to start the Windows Installer Service.

  Windows cannot start the Windows Installer service on computer local error 216:0xd8

  I follow several steps that are listed in the web pages of solving problems.  Tried to make own reboots, use the Microsoft Fix and it does not detect any problems.  I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer

  Please notify

  See if this ad helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• "Could not perform the operation because the default mail client is not properly installed"

  I just bought a new computer today and I tried to respond to a Craigslist post... which is then this error message appeared.  I don't know how to fix.  Can anyone help?  Thank you, Rick

  Hi ESPLongBeach,

  (1) what you email client use to send email (Outlook, Windows mail, Windows Live Mail)
  (2) is your email set up for the email client

  It could be that you need to set your default e-mail client.

  1. click on START and then default programs.
  2. click on "set your default programs."
  3 look to the bottom of the list for the e-mail program use. Until it clicks.
  4. toward the bottom of the page, there will be a link that says: set this program as default. Until it clicks.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Error message: could not generate the complete form

  I can see my filled, but I get the error message "cannot generate filled" when I try to print or share.  I can only view my completed form.  I use the app on my iPad.  Adobe Fill & sign DC

  Hi carole67073503 ,

  Please visit this link that addresses the same issue: fill & sign - was not able to generate a complete form

  Let us know if you face any problem.

  Thank you!

  Shivam

• Retrieving error - could not find the path of the image... M:/RecoveryImage/install.wim

  So, I went out and bought the USB on the gateway site to restore this laptop again and when I tried to do, he says recovery failed - could not find the path of the image M:/RecoveryImage/install.wim.

  I contacted support and they issued me a replacement USB drive, I get the same failure.

  I diagnosed the HARD drive and it passes.  I used diskpart to 'clean up' the disk drive HARD all nothing doesn't.

  [Under the direction of privacy] order number

  What gives?

  Acupro1,

  I you sent a PM with respect to research purposes.

• How can I fix my internet connectivity problems: entry msafd tcpip tcp provider ip could not perform looping simple communication

  WinSock diagnostic

  WinSock status
  info all base service provider entries are present in the Winsock Catalog.
  channels of information the Winsock Service provider are valid.
  error entry MSAFD Tcpip [TCP/IP] provider could not perform the looping simple communication. Error 10055.
  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
  Info entry RSVP UDP Service Provider provider passed the loopback communication test.
  error entry RSVP TCP service provider provider could not perform the looping simple communication. Error 10055.
  connectivity error problem exists with an installed LSPS.
  repair automatic action: WinSock Reset catalog
  action completed successfully: netsh winsock reset catalog
  the information system required reboot
   
  Diagnosis of network adapter
  Network location detection
  Info to help home Internet connection
  Identification of network adapter
  Info network connection: name = Local, Device network connection = Intel(r) 82566DM Gigabit Network Connection, MediaType = LAN, type = LAN
  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394
  Info network connection: name = Sprint PCS Vision, peripheral = Palm Treo Modem, MediaType = PHONE, type = NONE
  Info Ethernet connection selected
  State of the network adapter
  Info network connection status: connected
   
  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity
  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12017 connecting to www.microsoft.com: the operation has been cancelled
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
  [/codebox]

  Hello

  You did changes to the computer before this problem?

  Try the steps and check them out below:

  a. open internet explorer.
  b. click on tools > Internet Options.
  c. click on the Connections tab.
  d. click the LAN Settings button.
  e. uncheck all options on the shortcut menu.
  f. click on the OK button.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-12029-in-ie-8/47a865dc-3237-4e07-84a9-d9fb20a766e3

• Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  XP SP3 system

  I get warnings like this when Mcafee updates.

  Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Process * \SVCHOST. EXE the nest (1632) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Is this a problem Microsoft or Mcafee?

  Do I need to fix?

  In the McAfee forums, there are several similar positions such as:

  https://community.McAfee.com/message/241542

  I'll sue your question on in their community, as they already seem to know about it.

  I would also say that, unless you are very fond of McAfee or you are forced to use it, you plan to replace it with something that has a smaller footprint, uses less resources and doesn't have these problems - something like Microsoft Security Essentials, you can get here:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  MSE completed with the free version of MBAM and SAS should permanently keep your clean enough unless you're a daredevil like me:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Even if you keep McAfee, I always supplement it with MBAM and SAS since no single AV program does seem to know everything.  If your McAfee of your system is clean, I would interpret that means - McAfee found nothing, says he knows.  It is prudent to use more than a reputable scanner to get more coverage.

  If you choose to spend (and you can't have both at the same time), you must be sure to use the uninstaller that you can get from here:

  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101331

  Your system will give you better performance.

• Windows Experience Index problem: could not measure the performance of video playback

  My pc is not yet rated. When I click on rate appears on this computer, a msg error saying that Windows Experience Index for your system could not be calculated, could not measure the PERFORMANCE of VIDEO PLAYBACK. What should I do. Help, please

  Hello

  Here are a few things to check before launching performance index Windows (WEI).

  • Quit all running programs, and restart the computer before running the assessment (WEI).
  • Check with the manufacturer of the computer or the motherboard manufacturer for BIOS updates.
  • Make sure you have the latest Windows 7 compatible drivers for the graphics device installed (video card).
  • If you have any third-party media players installed, uninstall them until the end of the evaluation of the WEI.
  • If you have installed any third-party Media Codecs, try to uninstall them until the end of the evaluation of the WEI.

  Open Windows Explorer and navigate to the folder C:\WINDOWS\Performance\WinSAT .

  You should see the following 8 videos.

  2 files with .mp4 extension.

  3 files with the .mpg file extension.

  3 files with .wmv file extension.

  Double-click each of these files. They should open and play in Windows Media Player. These are the files that WEI runs video performance.

  One thing to remember is that the WEI score is only an indicator of the ability of the main components of hardware on the computer. It has no effect on the performance of the system.

  Tell us what you find.

  Concerning