DVD with pictures on them do not play
for some reason any DVD with the photo is no longer dependent. No walk at all to show a DVD has been loaded or is playing.
Hello
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.
Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.
Several good info here:
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014
===========================================
This troubleshooting could not help if there is alignment and/or wear issues however it
a shot.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
I have laptop HP Pavilion dv7-1260. When I put in a blu - ray disc I'm propmted to get an update. Even with the update, it will not play a blu ray.
Hello
· What is the update message that you receive?
· Do you have an error message when you try to read the Blu - ray Disc?
· This problem occurs only with Blu ray discs or any of the others?
To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.
See the link below:
http://Windows.Microsoft.com/en-us/Windows7/MPEG-and-DVD-video-frequently-asked-questions
-
ArcSoft PhotoImpression 6 - when the dvd is in fact I can not play the television-says damaged disc
When the dvd is in fact I can not play the television-says damaged disc. But he plays on the computer. I want to play on television. Also I have a number of pictures on this program in the files and want to sort by number. = How do I do?
Perhaps you should ask to Arcsoft?
-
I took a few live images using the camera on my iPhone 6. If the images are playing on the phone, they do not play on the iCloud or the Photos of my Mac app. Can anyone help?
sreecharan93 wrote:
... they do not play on the iCloud...
I don't know what that means. Does this mean that you try to access photos from another device?
sreecharan93 wrote:
... or on the Photos of my Mac app. ...
They will play in the Photos if you import them directly from your iPhone (without using iCloud).
If you do so, you will see this in the lower left corner of the photo in pictures:
Click on the "Live" button to see the movement.
-
IM using windows XP my DVD player on my computer will not play until I do
I use Windows XP and my DVD player in my computer does not read it. I try to operate in driver D and I also used E driver
You try to play a DVD?
FWIW... Win XP cannot natively recognize Commercial
DVD video... it requires a DVD decoder.If you could play before commercial video DVD...
do a system restore to a time before this started
may be your solution.Or you could buy a DVD decoder at the following link:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Info about DVD decoders:
Plug-ins for Windows Media Player
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-insOr you can download and use one of the following freeware
media players:VLC Media Player
http://www.filehippo.com/download_vlc/
(works on XP/Vista/7)Media Player Classic Home Cinema
http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
(works on XP/Vista/7)Or... you can try to download and install one of the
Following codec packs.(FWIW... it is always preferable, if you create a system restore
point before installing any software or updates).* Proceed at your own risk *.
(1) K-Lite Codec Pack (full)
http://www.filehippo.com/download_klite_codec_pack/
(Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)(2) information on CCCP (combined Community Codec Pack)
http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
(XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)(3) Windows 7 Codec Pack
http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
(2000/XP/2003/Vista/Server 2008 / 7)(4) Media Player Codec Pack
http://www.mediaplayercodecpack.com/
(Windows XP - Vista - 7)Good luck...
-
Samsung DVD - ROM SD - 616E driver will not play DVDs in Windows xp sp3 Home Edition
Dear supporters, Im having problems playing movies on my Samsung DVD - ROM SD-616E installed on my Windows XP SP3 Home Edition Dell Dimension 2350..., a box of lil in the center of my watch windowsmedia player a message saying no compatible dvd decoder is not installed? Help, please? thanx.
FWIW... Win XP cannot natively recognize Commercial
DVD video... it requires a DVD decoder.If you could play before commercial video DVD...
do a system restore to a time before this started
may be your solution.Or you could buy a DVD decoder at the following link:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Info about DVD decoders:
Plug-ins for Windows Media Player
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-insOr you can download and use one of the following freeware
media players:VLC Media Player
http://www.filehippo.com/download_vlc/
(works on XP/Vista/7)Media Player Classic Home Cinema
http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
(works on XP/Vista/7)Or... you can try to download and install one of the
Following codec packs.(FWIW... it is always preferable, if you create a system restore
point before installing any software or updates).* Proceed at your own risk *.
(1) K-Lite Codec Pack (full)
http://www.filehippo.com/download_klite_codec_pack/(2) information on CCCP (combined Community Codec Pack)
http://www.CCCP-project.NET/wiki/index.php?title=Main_PageGood luck...
-
Where can I obtain service pack 1 for windows Vista Home Basic
Where can I obtain service pack 1 for windows Vista Home Basic
Hey electric7422
Click Start then right click on computer
then left click on properties
It will tell you if you have a 32-bit version or 64-bit vista
links below have downloads the standalone vista service Pack 1 for each bit version
the 32-bit version
the 64-bit version
Walter, the time zone traveller
-
When I send emails with pictures in them, the person that I told him don't receive.
Hi the Photos that I receive in email, after I discovered some of them & before on they are not received by the person I have e mailed to, & when I go back to look at the original e-mail, the photos have GONE, I find myself with a contour, no picture but a red x in the upper left.
Can anyone help?
Regards Ian.original title: problems of picture for e-mailIf the photos are linked to an external source rather than embedded in the message, and then if you have it put under Tools | Options | Security to block the images related and content external, then the images will not appear unless enable you them. Make also sure to include pictures with messages is enabled under Tools | Options | Send | Parameters.
However, some messages are incorrect due to some e-mail programs is not not in line with the standards of the Internet, and so they do not include the images before their delivery. You can overcome that by using Message | Send as an attachment, rather than the message.
Steve
-
Windows 8 games graphics problems with Ideapad Z575. Do not play games. :'(
After you have installed Windows 8 and install all the drivers that I got from the site Web: Lenovo's laptop can no longer play any games. I have more option open of AMD Vision options or options "Switchable Graphics" as they do not appear in the menu when I right click on the desktop. I've updated the driver graphic via Lenovo website, but still cannot access any game. When I try to start a game, the game will display a white color screen with slight graphical artifacts. When I tried to start one of my games, "Killing Floor" it actually caused my cell phone restart.
Anyone have similar problems with their Windows 8 pc or have a solution?
Well, I finally found the problem. I discovered that the graphics driver that I had on the Lenovo site have actually NOT installed us. When I ran the Catalyst Install Manager, the Manager showed global progress bar, but it did not install anything. That was pretty weird.
When I ran the driver Catalyst install listed in the Chinese link that was given to me in this thread.
It actually installed and now everything seems to work. I asked of Vision engine again, I can use switchable graphics and I just tested with Dark Souls prepare to Die Edition without any problem. The game is actually more smooth.
Thanks again for the help.
-
DVD RW of Lenovo N200 do not play the DVD. But he plays perfect CD
Hi forum;
I've been using Lenovo N200 for 2 years.
I installed Windows 7 top through a DVD. Mean to say is that I used DVDs on it.
But now I am facing a problem, I can't play a DVD on it. Continue blinking light of rom. And in my computer in my G drive, I am unable to see the content of the disc. It did not open.
He plays well CD.
Its reference is MATSHlTADVD - RAM UJ-850
How can I solve this problem? Can I do something for her.
Help, please. I appriciate your answers.
Thanks in advance.
possible dead lens, necessary replacement, but you can try the suggestions here
-
Interpolation of shape with text - first image will not play?
Hello
I am attemping to shape tween text. (Flash CS5.5)
What I do is:
Create frame at frame 1
Insert text
Insert keyframes at two different locations on any time line
Change the last image of what I want that he turn INTO
Break all the keyframes
and insert the shape tween between first and second and second and third keyframes.
When I go to play the movie, it flashes the text that is in the last picture ONLY. What I am doing wrong? Ive tried everything, this is driving me crazy!
Thanks for any help you can offer!
Katelyn
When you use the interpolation of shape in the timeline panel, that it must involve drawn elements raw, so all the I can thik is that you have not break me the text down far enough. Can you show a screenshot of your timeline and what you provide is the text that you broke aoart?
-
Matshita dvd-ramuj-850 s player will not play dvd
DVD won, units play window media center won! t play dvd movie
Hi mikey7818,
1. what happens when you try to play the DVD?
2. you receive messages or error codes?
3 - is this happen when you try to play a particular video file type?
I suggest you try the fix it from the link given below and check if it helps.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer -
HDMI's picture on TV but not playing the sounds. Show "HDMI not connected."
Original title: HDMI
HDMI picture on TV but no sound noise shows not connected HDMI.
Have also just a screen showing saying monitor VGA Graphics standard PnP adapt, I don't remember having seen it before.
Switch HDMI cables... even TV is set to HDMI 2, have you tried the HDMI 1... even
I'm stumped... Please help!
Lee
You are welcome.
Glad to see that the problem has been resolved.
-
I did a movie with pictures on Movie Maker and played very well. Now, it's just to show Xs red in the photos of some, but not all. What I am doing wrong?
When you save your project, and then rename, move or delete a photo next time you open your project, you will see a red X where the photo was. Just a click with the right button on the X and select Remove then import your photo again under the new name or location and click on save project on the file menu.
In the menu task under finished film click Save to my computer tracking instructions and your project will be saved as a movie.
-
Burning disc - disc does not play on any DVD player or a computer with the exception of my computer
I have downloaded music and burned my computer on a DVD disc. This disc can not play on any DVD player and computer but my computer. I would like to read a disc in any CD or DVD drive. Please tell me what I need to do. Thank you!!!
I recommend you burn a cd or a dvd with zune (microsoft Corporation) follow the instructions here to find out how to burn a cd or dvd to zune.
If your song doesn't appear in your collection, I suggest buying your song with zune or Itunes
ITunes costs about $ 1 per track and zune costs 14 dollars per 10 tracks.
To learn more about the visit of zune music and reduced here.
In Itunes, all you have to do is open itunes and click itunes store then the music and find the music you want.
Download zune go here http://www.zune.net/en-us/products/software/download/default.htm
To download Itunes, go here http://www.apple.com/itunes/download/
Maybe you are looking for
-
Mac firefox 19.0 crashes everytime I open what to do?
Here are the Details of the error message part: AdapterDeviceID: 0 x fd5AdapterVendorID: 0x10deModules: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:19.0BuildID: 20130215130331CrashTime: 1361467967EMCheckCompatibility: trueFramePoisonBase: 00000000f0de
-
some kind of adware or something...
On my 27 "iMac 2011 in the messaging application online... I get these (I call them green Meanies) they say FREE of FILES with this green heart sorta shaped bit and an arrow pointing to the top right. (see photo) What the * are these things and most
-
Cannot find the files in macbook trash of the external hard drive
Recently, I dragged a large number of video clips from my external Lacie hard drive in my macbook air garbage. Whenever I opened my trash, I realized the moved files were there if my hard drive is connected. However, recently, I opened the bin and th
-
The use of cursors on the Smith abacus?
Hello world last 7 days, I tried to point some markers on the abacus of Smith. Please suggest any method to implement this. I want to score a few points on the smith abacus and get data. Thank you dg7318
-
How to add text to my video instead of creating Notes?
I'm trying to add text to my video because I'm not like the notes thing anyone know how?