HDMI's picture on TV but not playing the sounds. Show "HDMI not connected."

Similar Questions

• I see a file, when I play the sound comes on but no picture any suggestions thanks

  I downloaded a dvd of my home movies that I can see the files, but some play that for 29 seconds and one that says it's a little over an hour just plays the sound, even if I see the picture of him on the record at the beginning.

  Hello

  ·        What operating system is installed on your computer?

  ·        What is the type of file you are trying to play?

  ·        What application are you using to play the file?

  ·        Are you reading DVD file or you saved the file on the computer and then play?

  Method 1: If you play the DVD in Windows Media Player, then run the troubleshooter below and check if it solves the problem:

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Note: applies only to Windows 7.

  Method 2: Alternatively, you can try to install the codec for the file type and check if it helps:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Windows Media Player frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-frequently-asked-questions

  Note: applies to Windows Vista and Windows XP as well.

• HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

  Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

  Description of the problem
  
  

  • Download a file from PC (Win10 x 64) for Android phone has worked well.
  • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

  Someone knows how to deal with this issue, provide a work around...?

  I have way too much time on my hands right now...!

  Treatment

• Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Hi Jim,.

  1. What is the operating system installed on your computer?

  2. What is the format of the file you are trying to play?

  3. it worked earlier?

  I suggest you to follow the steps and check if it helps.

  Installation of the Codec and check if it helps.

  Codecs: Frequently asked questions for Windows 7

  Codecs: Frequently asked questions for Windows Vista

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• BT "paired but not connected.

  I've seen posts about this in the Droid forums but haven't seen a response.

  When I try to combine my Xoom with my Droid via bluetooth, the two say "paired but not connected. Am I missing a step in the process of connection? What should I do to ensure that both devices connect?

  
  

• Check for Wifi but not connected

  Hello

  I try to detect the State when the wifi is enabled but not connected to a wireless network:

  if(RadioInfo.getSignalLevel(RadioInfo.WAF_WLAN)==RadioInfo.LEVEL_NO_COVERAGE){
  

  but it does not work. What is the correct way to do this?

  Check the radioinfo to be connected, but not being coverageinfo is not on the level of correct coverage.

• HTC desire paired but not connected to bluetooth on win 7 x 64

  Try to connect the HTC desire on win7x64 home edition using bluetooth dongle.  HTC is recognized in devices and printers and shows paired but not connected in the settings on the phone.  How did I overcome the isssue of connection I want to transfer photos from phone to PC?

  Hello

  I suggest you to return these items and check if it helps:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Also check the manual for the HTC phone on how to connect Bluetooth devices to your computer, or you can contact HTC support for known issues with the phone's settings.

  http://www.HTC.com/us/support

• Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.

  Original title:

  Try to connect Huawei Sonic to win7x64 pro edition using bluetooth.  Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.  How do I overcame the problem of connection I want to transfer photos from phone to PC?

  Hello

  1. are you able to communicate and share with other Bluetooth devices?

  2. what happens when you transfer files?

  3. do you get an error message?

  4 you did changes to the computer, before the show?

  Method 1:

  Connect the phone to another computer and check.

  Method 2:

  If you are unable to connect to another computer, you can contact the manufacturer of the phone and check.

  http://support.Huawei.com/support/

• connected but not connected

  Hello
  on 11g on HP UNIX.
  
  Can not understand: connected but not connected:

  sqlplus sys@+ASM as sysdba
  
  Enter password:
  ERROR:
  ORA-12154: TNS : 
  Enter user-name: sys as sysdba
  Enter password:
  Connected.
  SQL> select * from v$instance;
  select * from v$instance
  *
  ERROR at line 1:
  ORA-01012: not logged on

  Any idea?
  Thank you.

  sqlplus sys@+ASM as sysdba
  ORA-12154: TNS:
  Enter the user name: sys as sysdba

  SQL > select * from v$ instance;
  Select * from v$ instance
  *
  ERROR on line 1:
  ORA-01012: not connected

  You connect to the instance by TNS connect descriptot ASM?
  Which alert log file shows?

  tnsping + ASM

• Windows Media Player only plays the sound of a dvd.

  When I put a dvd in my computer, it only plays the sound. No image appears.  How can I fix?

  If you hear the audio but not see the video, you are missing one of the codecs needed to play the file. For more information, see Codecs: frequently asked questions

  You can download and install ffdshow and check again: -.

  http://sourceforge.NET/projects/ffdshow-Tryout/

  or, try VLC Player: -.

  http://www.videolan.org/VLC/download-Windows.html

• Expert overview stopped playing the sound on track 1.  How it went?

  Expert overview stopped playing the sound on track 1.  How it went?

  Michael Lewin-Harris

  I do not see your post 3 up to what I had posted the message 4.

  Very important information that this current audio problem is not be seen in other new projects.

  Because you use first items 12 and because of the involvement of the narration in the symptoms, I tend to believe that your question is related to that of Llamadude and others described in the blog post link in post 4. Try focusing on this factor to rule it in or out.

  Despite these reports and comments that the fix described works, I was never able to reproduce the problem so that I can study to get the reasons why.

  Looking forward to your results according to your schedule.

  Thank you.

  RTA

• Static instead of sound - whenever I'm playing the sound, all I get is static

  Whenever I'm playing the sound, all I get is static, if the volume is 100 or 5. What can I do to recover my sound?

  Hello

  1. what operating system do you use?
  2. you use headphones?
  3. the problem happens on the speakers and the headphones?

  Check what operating system you are using. See the link below:
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  If you use Windows 7, then follow these steps:

  
  Step 2: try using the troubleshooting of Audio playback and check if it detects the problem.

  To open the troubleshooter of Audio playback:
  a. click the Start button and then click Control Panel.
  (b) in the search box, type troubleshooting and then click Troubleshooting.
  c. under hardware and sound, click on the audio playback problems.
  d. follow the instructions contained in the resolution of the problems.

  Refer to this article:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  
  Step 3: disable the optional speaker effects that are known as improvements and test

  Follow the steps below to disable the improvements:
  a. Click Start, and then go to the control panel.
  b. click sound.
  c. Select the playback tab.
  d. Enter select speakers/headphones
  e. click Properties
  f. Select enhancements tab
  g. disable all improvements
  h. restart the computer

  Refer to this article for help:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• 9650 blackBerry smartphones began to play the sounds of start/stop

  My phone has decided to start playing the sound at startup, shutdown and when I plug in my headphones.  It will do in silence and all alerts off profile as well.  No idea how I can get it to stop?

  Thanks in advance...

  Hi jhanka and welcome to the community of BlackBerry Support Forums!

  It seems that you have sound enabled on your BlackBerry® smartphone event.  To disable this feature, go to Options > Advanced Options > accessibility and change sounds event at no.

  Let me know if this worked for you.

  Thank you

• My Windows Media Player will play the video of an MPG file, but it will not play the sound. What is the cause?

  I do video editing.  I transferred my camera video file and Windows Media Player played the video and audio very well at the beginning.  I edited the file with editing software and exported the file again.  Now, the sound will not play using WMP but it will play if I use video editing software.

  As a result, I've uploaded new files from the camera and now WMP not give me sound on those either.  If something seems to be affected by my WMP.  Any help you can give would be much appreciated.

  Hi rgosmond,

  (a) don't you get any specific error message when you play the video?

  (b) what is the file format of the resulting video file after editing by using the video editing software?

  (c) you are able to play the files on the computer? You hear the sound?

  I suggest you try the following steps:

  O make sure that windows MediaPlayer is not muted, press F7 on the keyboard to turn the sound back on.

  Ø check if the volume is at a minimum in Media Player, press F9 on the keyboard to increase the volume.

  Verify that the default audio device is correctly set

  1. click on start, type Sound in the box to start the search.

  2. click on sound in the results of search at the top of the start menu.

  3. click on the tab reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected. Follow these steps:

  4. on the playback tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  5. on the playback tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  6. If the sound settings are well positioned, you are using speakers as the audio device and your speakers are already set as the default device, go to method 5 now.

  7. Select the audio device you want as the default audio device and then click on set as default.

  8. click OK to save your settings and close the sound dialog box.

  Now, check if the problem is resolved.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• StageVideo does not play content downloaded, but will play the included content. (iOS)

  Hi all

  I'm working on an application and try to use StageVideo and I came across a problem.

  I would like the app to be able to play H.264 videos on iOS.

  The video content to be played will be downloaded by the app from our server to the device.

  I ran my code under windows and android (specifically a xoom) and it works, so I know that the files are downloaded and paths are correct. However, when you run the code on iOS I was not see any video or hear all the sounds.

  I then tried including the video file when making the ipa and play from the included location and he play with sound and video.

  Can anyone think of a reason the video file will not play if it is downloaded as opposed to being included with the application?

  Including files video isn't an option because they change regularly, so need to be downloaded.

  Thank you

  Chris

  P.S. I post code if you need it, but I followed a little this code:

  http://forums.Adobe.com/message/4352118

  who is responsible in a view empty.

  Thanks for your help.

  I got it to work. My problem was that the app was the creation of the local file using our address of the server, for example ' video/1100', what I knew was a video, so I would spend it in the StageVideo who don't know what to do with it. The solution was to add ".mp4" at the end of the location of the file for example "video/1100.mp4" so that StageVideo could open.

  When I got it with the app, I was using the original file named "example.mp4", so he was not having this problem.

  By the way, I ended up going with StageWebView for my solution, because it is easier to design my app round have a video in the forground to require a gap by everthing in the background.

  (StageWebView also has the problem that I found above where it takes a file extension to play).