DW cc has widgets & auto Jwho & jQ controls mobile? When adding the Jwho auto apply controls & widget

Similar Questions

• Receive error message when adding the control of signature on the screens of the Interview with the OPA

  Hi team,

  We have an obligation to add electronic signature on multiple screens of interview.

  I tried to add the control of Signature in the form of the interview, but I get the error message below. We use the OPA 12.2 version November cloud.

  "Current data mapping settings do not support file attachments. File upload controls is no longer valid. (OPA-E00538)

  Thank you

  Vivek

  Yes. And make sure that you submit to a Service Cloud FileAttachments active or item by using a connection to the web service that supports attachments for the entities mapped on a.

• Ethernet has an auto assigned ip address and cannot connect to internet

  In my ethernet network settings it says "Ethernet has an auto assigned IP address and won't be able to connect to Internet." even though it says its connected.

  End 2014 27 "iMac 27 inch Retina 5 K, processor i5 3.5 GHz, 24 GB of memory, AMD Radeon R9 M290X 2048 MB

  Just upgraded memory 16 GB with Corsair Memory

  Go to System/Network Preferences and access your active account (ethernet or wifi).

  On the scale of the location at the top of the screen, choose a new location.

  Go through the short checklist and make it active.

  Who should receive your active internet connection again.

• Updated in date dated 13/01/2016 has been auto installed I lost sound

  Windows 7 update as of 13/01/2016 has been auto installed, I lost his (missing sound) did a restore system recovered from his.  To check the widows 7 is upgrading its system has again been lost.  Y at - it a fixed?

  OT:

  The window update

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, Audio, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• ESXI4.1 has how often is DRS control the CPU usage?

  ESXI4.1 has how often is DRS controls the use of the CPU on the host?

  I have 16 ESX host. Some of the hosts reach very hight CPU use, up to 98%, although some are as low as 52%. I understand DRS moves virtual machines only when you have to. I wonder how often it checks. Is there a set period of time, or DRS works in real time to check the hosts. Virtual machines are finally left guests busy, although guests were constantly busy today, about 90% + CPU, while some have been systematically 50%.

  On the 16 hosts, we have configured 1 host failover capability and the current capacity of 11 host failover. Affinity rules apply only to a limited number of virtual machines (about 6) of about 300.

  By default DRS is called every 300 seconds.

  Best regards, Robert

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Disk Defragmenter has detected that Chkdsk is scheduled to run on the Volume: C:. Please run Chkdsk /f.

  I know this question has been asked several times, but I did these steps and still not get Defragmenter to work.  My Disk Doctor said I don't have problems with my Defragler work program - but I don't have a C: drive not 'dirty '.  I have Windows XP Home Edition and do not know how to run an XP Recovery Console.  Y at - it an easy way just to get the Defragmenter to work?... when I run Chkdsk... It goes through stages and then closes and the problem is still there.  Defragmenter just stopped working, my computer everything works fine.  Help, please.

  Hmmm...  It should only take a few minutes for ImgBurn to create the bootable XP Recovery Console CD, then maybe one of the songs that you have downloaded (xp_rec_con.iso or install IgmBurn) won't quite right.

  You want ImgBurn to play a happy tune when it is successful and a "Oh no!" message when it fails, but it shouldn't take hours to burn this ISO file bit.  You can try another system.  You can always uninstall ImgBurn when finished.

  I say 'be patient' when you run the chkdsk /r command because sometimes it seems to be stuck (or even go back), but it should end later.  Depending on the volume size, the amount of data on the volume, the speed of your system and what the chkdsk finds to do, you can watch several hours.

  Look at these words from the mouth of Microsoft:

  If you use chkdsk /f on a drive or drives for very large (for example, 70 gigabytes) with a very large number of files (for example, millions of files), chkdsk may take a long time (for example, over several days) to complete. The computer is not available during this time because chkdsk does not relinquish control until it is completed.

  At the time of this writing, I'm guessing a disc 70 GB was "very large" but it is quite modest by today's standards.

  Now with today's technology, it is unlikely to take days, but it could still take some time!  If your HARD drive is afflicted with a problem material and dying, it can never finish or be unable to fix things.

  To start XP, it automatically checks each volume to see if it is dirty and will try to run chkdsk from the afflicted volumes.  Sometimes, it's good enough to clear the dirty bit, sometimes it isn't.  You will see a message at startup if the volume should be checked for consistency and XP will do the best.

  That's exactly what the message tells you:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))

  You can query the dirty bit on a volume from the command prompt window.

  Click Start, run and enter in the box:

  cmd

  Click OK to open the command prompt window.

  To query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Type "exit" to close the command prompt window.

  If you are suspicious of your HARD drive and think it might be failing, now would be a good time to backup your personal data (documents, pictures, music, etc.) to an external location - a separate attached USB drive or a few clouds on the Internet.

• I have a Dell (Dell V305) printer that is only a year. He has been guaranteed. What was happenning, is that the printer does not print up what I uninstall/reinstall.

  I'm having a problem with my printer does not print.  What I do I uninstall the printer and reinstall then it works very well for a week or two and then the problem starts again until I have reinstall the printer again.  The printer has ink, so it's not the problem. That's how I know it does not print: when I try to print a cartridge level page show empty and I can't print.  Yet once, when I uninstall/reinstall the printer, then the catridge levels show complete and then I can print.  I thought that maybe it could be that some issue that when I uninstall the printer that not all components are removed.  I uninstall not uninstall printer functionality and not the Add/Remove Control Panel.  Uninstall from the control panel would solve this problem?  Please notify.  Thank you, John

  Hi sockers,.

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  4. you receive an error message when printing?

  I suggest you run the fixit tool available in the link when you are unable to print on the computer and check if it helps below.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  If the previous step fails then I would suggest that you uninstall the software from the printer to the computer using the method mentioned in the link below and then install drivers from the Dell site.

  Uninstall Dell V305

  Drivers & downloads for printer V305/V305w AIO inkjet

• When trying ti uninstall a program, it won't let me. My administrator has set policies to prevent this? I am the only user on this laptop? Helpmy administrator

  When trying ti uninstall a program, it won't let me. My administrator has set policies to prevent this? I am the only user on this laptop? How can I remove this program... It was a change of my internet explore (Inbox is now my default page) I'm using windows Vista

  Hello

  You run the computer as an administrator or as a standard user?

  When you say"it's a change of my internet explore (Inbox is now my default page), what happens exactly?

  What is you receive the exact error message?

  Please provide us with more details about the issue so that we can help you best.

  Follow the steps below and check if that helps.

  Click Start, click 'All programs', please find and open the folder "Accessories".

  (B) Please, right-click on "Command Prompt" and select "Run as Administrator".

  (C) enter the following command in the window line come.

  ·         NET user administrator / Active: Yes

  • NET user administrator /active: Yes
  • Note: There is a space between "Administrator" and "/ active: yes".
  • 4. close the session and log on to the administrator account and then try to install.

  Also try to disable UAC:

  • 1. click the Start button, type "User account control" and press ENTER.
  • 2. when the user account control settings box appears, move the slider to never notify.
  • 3. click on OK and then install the program.

  Note: Please turn off the admin account by running net user administrator / active: No. and then turn on the UAC after troubleshooting.

• "Windows Media Player has encountered a problem when burning the file to disk"?

  "I ENCOUNTERD CE WHEN BURNING YEAR MP3 AUDIO CD AND NOW I wanted TO KNOW WHY IT WON'T WORK THAT IS THE CODE POPPING up" Windows Media Player has encountered a problem when burning the file to disk ' WHAT CAN BE THE PROBLEM

  Hello MactabardX,

  I try and remove Windows Media Player and then reinstall it.
  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try to use the Troubleshoot utility to see if that fixes the problem.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  If the size of the .wmv files is too large, it can cause Windows Media Player to stop working.

  I try and remove videos from Windows Media Player library and test to see if the size of the files could be a problem.

  If please reply back and let us know if these steps helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk". What's wrong? How to fix?

  When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk".    What's wrong? How to fix?

  I tried several times to remove the selection to burn and create a new a new but it keep "Windows Media Player has encountered a problem when burning the file to delivery" appears what should I do?   What problem is it?

  Hello

  1. what file format you are trying to burn?

  2. have you made changes on the computer recently?

  3. What is the security software installed on the computer?

  If it's something you downloaded, it may be copy protected by DRM, in which case you may not burn it to a CD or DVD.

  Here are a few things to try:

  1. make sure that the disc is clean.

  2. try a different brand of blank discs.

  3. stop all other programs that are running.

  4. make sure that the hard drive does not use disk compression.

  I suggest that you follow these steps and check if they help to solve the problem.

  Method 1:

  Try to use the Troubleshoot utility to see if that solves the problem.

  a. open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel.

  (b) in the search box, type "convenience store" and then click Troubleshooting.

  c. click on show all and then click the Windows Media Player settings.

  Method 2:

  Select a recording speed (write) more slow for the CD burner.

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Method 3:

  If you have any third-party burning software, I suggest you temporarily Uninstall it and then try to burn the disc using Windows Media Player.

  Note: Reinstall the software after the trial.

  Method 4:

  Temporarily disable all programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  I hope this helps.

• Firefox has suddenly start delay when accessing the secure site

  We have an application Java Tomcat 7 on Amazon Web Services EC2 server. The server is configured so that our application is the root application and is accessible from port 80. The application and the Tomcat are configured with SSL, so that whenever someone types in the url of the site (e.g. www.something.net) Tomcat will switch to HTTPS and use port 8443.
  This all works fine, but it seems that if for some reason any Firefox expires when accessing the site, it will never reconnect on the site and any attempt to connect using www.something.net indicates that the connection has expired. Yet if you put in the port number (for example, www.something.net:8443) happens immediately.
  I tried setting compensation in web cache content, defining the limit of cache to zero and by disabling web content offline. None of this has worked. Re-installing Firefox worked.
  We if the question was limited to Firefox, but we did eventually run run in on Chrome too. On Chrome, I was able to get the browser to connect to the site by going to settings > advanced > clear data of the browser and delete the browser history, download, history, cookies and cache of images and files. Once I did the site come immediately with www.something.net and switch to HTTPS as it is supposed to do.
  It took me several months to encounter this problem. But other users have encountered immediately (for example, when configuring a new machine).
  Anyone can shed some light on this? I saw some issues, but none of them had what contributed to my situation. Can anyone suggest a way to remove all that is prevent Firefox to connect?

  Pass port SSL 8443 to 443 has solved the problem. It seems that when the www.something.net url is entered, Firefox remembers that it's an SSL site and automatically add the 's' to get the https. In fact after the timeout, the url in the browser line https:www.something.net. Of course, this is by default the SSL port (443) standard, which does not work if 8443 is used. Join port 443 has solved the problem.

  If you read about Tomcat configuration, the default SSL port is 8443. Maybe this is done for the test, but there never seems to be explained that there could be problems with 8443.

• After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  And this is not recognitze by any device, computer or iPhone 6plus.

  If you or the original owner did not have the password no one here or at Apple can help you.

• Since the update for Firefox 4, I am no longer offers the possibility to save the tabs when closing making it much faster to access these sites when starting the next day. Why this possibility has been removed? It's a favorite feature.

  Since the update for Firefox 4, I offer more the ability to save tabs on shutdown - makes more rapid access to these sites when commissioning the next day. Why this possibility has been removed? It was a feature favorite and saved a lot of time.

  Firefox 4 records the previous session.
  
  You can use "Firefox > history > restore previous Session" for the previous session.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

  You can set the preferences of warning on the topic: config page true via the context menu or toggle the value with a double click of the left.

  • browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
  • browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
  • browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
  • browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• Lost my favorites in the sidebar has only 3 icons with (untitled), impossible to restore the bookmarks and cannot add bookmark. Tried to uninstall and reinstall Firefox: no change.

  Firefox crashed, and a message appeared on the Internet (I couldn't understand it, and I'm not able to remember). The problem seems serious, first of all, I scanned my registry with Registry Mechanic, and then I checked the status of my drive with Performance Toolkit, which has identified a low level and offered to clean the computer. I agree with you. And when I tried to reopen Firefox I discovered that the 3 icons in the sidebar with (untitled), that the bookmarks were gone and I could not restore, nor add anything.

  This may be a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox