ESXI4.1 has how often is DRS control the CPU usage?
ESXI4.1 has how often is DRS controls the use of the CPU on the host?
I have 16 ESX host. Some of the hosts reach very hight CPU use, up to 98%, although some are as low as 52%. I understand DRS moves virtual machines only when you have to. I wonder how often it checks. Is there a set period of time, or DRS works in real time to check the hosts. Virtual machines are finally left guests busy, although guests were constantly busy today, about 90% + CPU, while some have been systematically 50%.
On the 16 hosts, we have configured 1 host failover capability and the current capacity of 11 host failover. Affinity rules apply only to a limited number of virtual machines (about 6) of about 300.
By default DRS is called every 300 seconds.
Best regards, Robert
Tags: VMware
Similar Questions
-
Running Windows XP, I often setup.exe keeping the CPU at 100% for at least a few minutes... this process can be completed or ignored?
"Setup.exe" is a generic term used by many applications. The short answer is 'yes', it's OK to complete the process, but you really need to know what it is and why it continues to run.
You probably need to download, install, update and run these free malware scanner (not at the same time):
MalwareBytes AntiMalware
SUPERAntiSpywareIf that is not fix things, and assuming that this process begins when you start the computer, download, install, and run Autoruns. When Autoruns has finished scanning, click the 'Connection' tab and look for the line that contains "setup.exe". You can just uncheck the box on the left, or remove the item, which will prevent the routine of starting when Windows starts.
Preferably, however, you should look at the path containing setup.exe where you should be able to deduce what application is trying to set itself up. You can then take the appropriate measures, which may be simply delete the folder that contains the file. Note that if you delete the file, you must ALSO remove the line in Autoruns, otherwise you will get a "file not found" error every time Windows starts.
-
How to check the CPU usage and paging using LabVIEW
Hi guys,.
I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?
any help, suggestions or advice will be greatly appreciated...
Kind regards
Prashant
Hello
If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:
C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb
Also, you have several screws that you can use to verify information about the processor.
Kind regards
-
How to get the CPU usage in LabWindows using C program
Hi all
Please help me...
How to get the CPU usage and the use of the RAM in LabWindows CVI 12.0 using C.
Any help with this will be appreciated.
Thank you in advance
-
How to check the CPU usage in the database
How to check the CPU usage?
in Linux and database level
Hello
under Linux, you can use mpstat command, for example:
[oracle@vSLLGM132 ~] $ mpstat Pei ALL 2 10
Linux 2.6.32 - 300.10.1.el5uek (vSLLGM132) 23.11.201414:27:08 CPU user nice sys % iowait % irq % sweet % fly % idle intr/s
14:27:10 all 1.00 8.50 9.00 0.00 0.00 0.50 0.00 1423,50 81.00
14:27:10 0 1.00 8.50 9.00 0.00 0.00 0.50 0.00 81.00 26.50CPU utilization tracking can be done with the command SAR u.
.At the database level: data dictionary views: v$ sysstat, v$ iostat, V$ SYSMETRIC_HISTORY.
Read the MOS Notes:
Diagnose hardware base caused by Performance issues (Doc ID 148176.1)
Troubleshooting: The use of high processor (Doc ID 164768.1)
Concerning
Borys
-
I am runnig windows xp and avg spyware. in the Task Manager, it shows as an avg program running with 95% of CPU usage. have trried to uninstall avg and it just adds to the bottom of programs running on the Task Manager. How to solve the problem and speed up computer.
I am a consumer like you and am not associated with Microsoft. If check you this thread later one of the mods forum could give you some better suggestions I can offer.
If you are having problems with AVG, you may need to ask for help on the AVG forum.
If you want to uninstall AVG and cannot do it using Add/Remove Programs, you might need a tool for uninstalling AVG:
http://www.Avg.com/ww-en/download-tools
Good luck...
-
How to set up notification by e-mail to the CPU usage complete on OEM12c?
I found a Doc Oracle, the way that e-mail notifications are configured? How can I check that after setting the notifications?
4.1.2.3 to subscribe to receive e-mail for the Incident rules
An incident rule is a rule defined by the user that specifies the criteria by which the notice should be sent for specific events that make up the incident. A set of collateral rules, as its name suggests, consists of one or more rules associated with the same incident.
When you create an incident rule, you specify criteria such as targets that you are interested in, the types of events you want that the rule applies to. More precisely, for a given rule, you can specify the criteria that you are interested in and the methods of notification (such as email) to be used for sending these notifications. For example, you can set up a rule that when a database crashes or any database backup job fails, e-mail should be sent and "disruption log" notification method must be called. Or you can set another rule that when the CPU or memory of any host using reach the critical severities, SNMP traps to be sent to another management console. Flexibility of notification is reinforced by the fact that with a single rule, you can perform multiple actions depending on specific conditions. Example: When a condition of monitoring such as machine use of memory, for an incident severity of 'warning' (to 80% memory usage), send an e-mail message to administrator if gravity is "critical" (99% memory usage), the administrator of the page immediately.
You can subscribe to a rule you have already created.
In the configuration menu, select cases, and then select rules of the Incident.
On the rules of the Incident - all company page rules, click the rule set containing rule climbing incidents in question and click on change... Rules are created as part of a set of rules.
Note: where there is no set of existing rules, create a rule set by clicking Create Rule Set... Then, you create the rule in the context of the creation of the rule set.
In the section the page rules change a game rule, select the rule of climbing and click on change...
Go to the Add Actions page.
Select the action that intensifies the incident and click on change...
http://docs.Oracle.com/CD/E24628_01/ doc.121 /e24473/notification.htm#CACHDCADMake sure that you have the correct thresholds...
target home > monitoring > "metrics and parameters in the Collection.
Check the status of incident for warning events and criticism for the targets of the host
Setup > Incident > Incident rules
-
How can I remotely control the music on the 4th generation Apple TV
On the 3rd generation Apple TV, I could use the app Remote for artist, Albums, songs and playlists which was to play directly from the Apple TV remote. This allowed me to sit on the deck and set or change my playlist remotely while my Apple TV played on and on. I couldn't count on Airplay from my iPhone to the Apple TV because of being at the edge of my wireless connection. So I used the application to load a playlist on the Apple TV, which was always in range and connected to my stereo.
With the 4th generation, I can't find an option to load remote a playlist, artist, album, or song. I can only handle what has been loaded using the physical remote control and a TV screen that beats my goal. I bought the 4th generation, because the 3rd generation could not access my subscription of Apple's music while the 4th generation can.
Am I missing something or is the 4th generation Apple TV / Remote app missed something?
Make sure that your Remote application is up-to-date. The current release is 4.2.3 and fully supports the music playback controls.
Remote by Apple
-
How to use and control the tabs?
Sorry for such a general question, but I use Firefox with older versions of Mac OS x for years and have just been struck by this brand new and I have no idea on your tabs, "new tab page" etc. Can you just send me some documents so I can understand what they are and how to use them?
All I see on my headers Ff are all sorts of legs that have no relevance to me, like 'how to stop Firefox from... '. "(twice), a few other symbols Ff and other"tabs"I don't know everything." All the do is filling up a bar line.
Thank you-
You are welcome.
If you have any other questions feel free to ask them.
-
How can I dynamically control the sound
Hello
In the header part of my site, I have included a flash with sound, it plays automatically when the page is loaded, if I stop the sound in homepage, it plays the sound, when I go to another page. I want to play the sound continuously, even if the pages are loaded. How can I solve this problem?The problem is that the whole page reloads when you click on a button.
My suggestion would be to frameset to load separate pages in a separate frame navigation. This should keep the music played on all pages as navigation charges ever.
Also, I noticed that there is no way to start playing the sound again after you stop it once. -
How Essbase treats nets of the CPU?
Hello
In our environment, we have the following Solaris machine:
Computer type: T4 - 1 8 Core SPARC SUN
CPU speed: 2 850 MHz
UC: 1
Cores/CPU: 8
Total number of cores: 8
Memory: 32 GB
Of these resources, 3 cores are available for Essbase 11.1.2.4. As we know from the material administrator, each kernel has 8 wires, so in total for Essbase, we have 3 cores x 8 = 24 son son. And now the question is, how Essbase treats these wires? Separated from central units 'virtual '? In other words, we can for example set of CALCPARALLEL 8 in our environment, and these 8 wires will be used by Essbase (of course, assuming it's possible)?
Thanks in advance for your prompt response.
Rafal
If it is SPARC T4, then you should have 8 threads by heart, calcparallel must set the number of threads to use.
-
The Task Manager is now just 'CPU' because I must have hit something wrong. I was hoping just to click on the tab use the CPU in the Task Manager, now somehow when I hit CTRL, remove alt. it shows only the CPU usage graph.
Double-click the window border.
-
model of a few months. Using Bullguard as an anti virus protection.
Sunday, October 10, 2010 10:28:47 + 0000, merley29 wrote:
model of a few months. Using Bullguard as an anti virus protection.
I've never heard of Bullguard, and he certainly isn't one of the
best antivirus products.My guess is that you are infected with malware.
For an anti-virus program, I recommend eSet NOD32, if you're ready
to pay for it. If you want a free anti-virus, I recommend one (are not
run several) of the following three:
Avira AntiVir
Avast
Microsoft Security Essentials
You also need anti-spyware software. I recommend that you download and
(both freeware) to install MalwareBytes AntiMalware and
SuperAntiSpyware.Ken Blake (MS-MVP)
-
Satellite P100 - 400 PSPA6A: How can I control the fan speed manually
Good evening
I would like to know how can I manually control the speed of the fan?
I ask this question because my laptop rarely use the fan at a higher speed.Today, I listened to more than the normal fan, I have check the temperatures and the CPU was Core1:95ºC Core2:99ºC
I'll clean the fan, but I want to know how can I manually control the fan (of course with the software: P)Kind regards.
Hello
I guess that the Toshiba Power Saver has been installed on your laptop and you use this software from Toshiba.
If you are using Win XP and that the GST is installed, then you can check the configuration of basic settings and you might find the options to control CPU, CPU processing speed and method of cooling.
If you are using Vista, then you should check the Vista Power Options:
Check this thread how to manage Windows Vista power management features
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38906&TSTART=0But in most cases, the cooling modules are controlled by fan that is stored in the BIOS table.
-
Hello, thank you for reading my question.
I've been wrestling with this for several hours. Just trying to change one of the examples provided in LV2014.
1 I add a control, in the command window, a tab as the original controls as you can see on Ref [1], I added the extra and the farm AND Boolean Y & Z, tested and it works very well. This seems to work on any tab, in other words, I click on the tab I want and select a control I want a TI works fine.
2nd I want to actually control the same appearance, see Ref [2]. I could not figure out how to copy and control the moose in the control panel user interface, but has been able to copy and paste the control into the block diagram. However, the control is not associated with the tab and is it should be a simple mater of shuffling to the active tab but not!
Also is there some explanation why two Boolean z, that I did slip on the tab seems different than Y Boolean in the block diagram window? Is this because the Y Boolean has been customized?
Maybe you are looking for
-
Windows XP SP3. I have been using Firefox for a while, and it never happened.
-
can I put my iWeb 2.0.4
I have iWeb 2.0.4 on my 10.5.8 mac os x I can it go?
-
How to type letters accented with Satellite L300D?
I recently bought a Satellite L300D laptop and I need to be able to type in foreign languages. On standard keyboards I use the Alt key as the numeric keypad to achieve, but I can't understand how this works on this laptop (holding Fn and Alt don't wo
-
Windows Server 2012 Release Candidate, WiFi n, the NPS server. Error 0x800f0922
I can't add the NPS server to the roll, Windows Server 2012 Release Candidate, features no. WiFi connection. I get the error 0x800f0922.
-
in newsgrps have more than 1 million no read and not downloaded files-Clean Up does not.
in newsgrp, have file w/over million posts not downloaded, someone, long ago, I suppose. So far, I could post & clear, shows, all were read. But more vccan can't post. I tried the Clean Up program, but who does that for downloads, these have not been