DW error? Links created in CS4 to put a slash before the name of file in html.

Similar Questions

• 4 gb + 8 gb Fuze V1 put randon numbers before the names of album on micro sd card

  Hi I have a rocket version1 of 4 GB which is new and has been flashed to the last level. Its a great player. I recently put a 8 GB sandisc inside card and copied some albums in through. When I go into the music-files-external card-music-NewFolder I find my albums have been re-appointed and have a random series of numbers and letter in front of them. Music plays very well, but obviously find the album when it was renamed is boring.

  The internal memory does not seem to be affected by this problem

  Is there a cure or a round work?

  Is there a better way I should be naming my albums?

  looking forward to your answers

  Dave

  Odd numbers in front of the file names is one of the weird things that occurs when the files are transferred using MTP mode. I wish really that Microsoft it _never_ invent this stupidity!

  MTP mode is only really necessary if you have paralyzed DRM (copy protection) files and you want to synchronize with Windows Media Player. Otherwise, you can change the setting of USB mode on the "rocket" in MSC mode. Then it will work as a USB and you can simply drag-and - drop (or copy - paste) your files in the directories right on the "rocket".

  You should know that all the files that have already been transferred in MTP mode will not be able to seen by your computer when you change to connect in MSC mode.

  Similarly, all the files that put you on the "rocket" in MSC mode will be not able to be seen by your computer if you connect later in MTP mode.

  The "rocket" can see and work with files added in both modes.

  Overall, MTP mode ends up causing much too many problems. So, unless you have DRM files which need to use MTP mode you should be better off using the MSC mode.

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• 5.7 LR is no longer exporting files jpg (from RAW). No error message, just "finished work". No way around changing some options for export as the name of file, image size...

  Why is 5, 7 LR is no longer exporting ALL files jpg (from RAW)?

  No error message, just the usual "finished work" - but without actually writing a jpg file.  No way around changing some options for export as the name of file, image size...

  Hi antjeh37833361,

  Could you please export a Jpeg image and see if it exports.

  Also try to export the RAW image in Jpeg format on the desktop and then see if it exports.

  Please upgrade to the latest version 5.7.1 if Lightroom you are currently on 5.7

  Kind regards

  Tanuj

• Error code: 0x800CCC0F, your server suddenly put an end to the connection when sending emails with attachments

  Original title: send Inbox problems

  If I attach a pdf file to my outgoing mail, it lies in the Outbox and will not send then I get an error message, send e-mails with no attactments is no problem

  If you have your anti-virus value analyze them, disable the e-mail scanning.
  It is redundant and doesn't interfere with the transmission, especially with Windows
  Mail.
   
  --
  Dave N.
  MS - MVP (Mail)
  Windows 7 Ultimate 64
  Get it: http://download.live.com/wlmail
  Get Help: http://www.windowslivehelp.com/product.aspx?productid=15
  "wynnieboy" wrote in message
  News: * e-mail address is removed from the privacy... *
   
  After my rarlier question if I add an attachment to an e-mail, it will be
  do not send and this is the error message
   
  Your server suddenly put an end to the connection. Possible for causes
  It include server problems, network problems, or a long period of
  inactivity. 'A last try', account: 'imap.aol.com', server:
  'smtp.aol.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, Socket error:
  10053, error number: 0x800CCC0F
   
   

  Windows 7 Ultimate 64

• Error when creating a receipt of foreign currency by using the Create_Cash API

  Hello
  
  I'm working on the conversion of AR received in R12 and try to create receipts using AR_RECEIPT_API_PUB. CREATE_CASH.
  Reception is created successfully when the currency_code is USD. Method of reception that I'm passing is "manually".
  
  When the currency_code is not USD (EUR in my case), I pass the values p_exchange_rate_type and p_exchange_rate_date.
  But without creating the receipt of currency giving error - error API: AR_RAPI_RCT_MD_NAME_INVALID.
  
  When I tried to look at the API for this error, I don't see this error in the API. I see an error with the name 'AR_RAPI_RCPT_MD_NAME_INVALID', but nothing shows up for the error "AR_RAPI_RCT_MD_NAME_INVALID" ("P" missing "RCPT"). I don't know where this error is calling from?
  
  I don't know why the API is mistake out for foreign currency receipts saying reception method name is invalid. But it works very well for currency_code USD with the same name of method of reception.
  
  Any help would be much appreciated.
  
  Thanks in advance.
  
  Kind regards
  Abidja

  Hi Bob,

  The Bank associated with your payment method allows "several recipes of currency? Maybe it's the issue.

  Thank you
  Anil

• Link to FrameMaker 8 Robohelp generates umlaut in the names of files - how to remove?

  I'm linking German Framemaker files translated into Robohelp.

  The title 1 and title 2 areas in my source Framemaker files often contain accents in words/phrases.

  Unfortunately, when you bind to Robohelp 8, umlauts appear in the file namessection.

  And umlauts are not allowed characters in file names.

  How can I remove the umlauts and yet keep a building unique source for my Framemaker-Robohelp project?

  (To remove the source files would of course be tedious and return the incorrect words.)

  (To somehow deprive him of the file names would create many broken links).

  Our books are translated into several languages. I really need the appearance of the single source of Robohelp 8 chassis to work properly.

  Any process or procedure would be very appreciated!

  This error is quite another. Please verify that all of the subfolders in the path of the output in SSL dialog box folder do not have a space at the beginning of the folder name. It seems that the project was created within a folder with spaces at the beginning of the folder name. Please correct the path by moving the project to a folder with no space in the beginning of the name of the folder in the parent hierarchy of the folder root of the project.

  

  This should solve the problem. In this case, it does not work, please provide the name of folder path and full ouput file.

  MILIN

• The language by default keeps put full stop before the sentence.

  Hello world. As mentioned in the title, the language of my Photoshop SC6 keeps putting diaphragm openings at the front of the sentence. It moves that at the end of the sentence if you start typing after the point otherwise he is sitting in the front.

  Here is an example of what it looks like:

  . This is what happens when I try to put the full stop at the end of the sentence

  The same thing happens with in fact all punctuation. I had a quick glance in the preferences and default language options. I know there is a way to check the paragraph options, but I can't seem to find it at the moment. It's very strange cause it was working perfectly fine until I accidentally dropped something on my keyboard and then something strange happened.

  I appreciate all help.

  Thank you

  Amy

  Hi Amytreacle,

  Please see the link below:

  My numbers and punctuation glitching on Photoshop. Help?

  Please let us know if it helps.

  ~ Sarika

• Error message when you try to use Windows media Player: the wmploc.d11 file has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected

  My windows media player all of a sudden started giving the message "the file wmploc.d11 has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected.   It started just today and I used it OK so far.    He says then I would go on the site to download the correct version. I click Yes and then try to download windows media player 11 for vista, but it then tells me that this does not apply to my system.  Any help would be appreciated,

  Thanks in advance.

  My windows media player all of a sudden started giving the message "the file wmploc.d11 has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected.   It started just today and I used it OK so far.    He says then I would go on the site to download the correct version. I click Yes and then try to download windows media player 11 for vista, but it then tells me that this does not apply to my system.  Any help would be appreciated,

  Thanks in advance.

  =====================================
  It might be worth a try to do a system restore
  Safe mode for one hour before the beginning of the question:

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  And/or... Maybe the article would be worth the trip.

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• When a right click to create a new folder, I can't see the new option 'file' in the menu. Why?

  I'm running Win 7 Ultimate and it happened on my system for the first time: when a right click to create a new folder, I can not see new option 'file' in the menu.
  I remember that I did not create new records from the last 5 days, so I can't say when the problem came. But I remember that yesterday I uninstalled 'free. '
  antivirus application which disappointed me a little. And it was the only action I suspect to have effect on my system.
  So I can't create folders in the usual way. And I need help to solve the problem. Moreover, the cmd command line works and when I type:
  MD x:\AA,
  The result is a folder named AA at the root of drive x:

  Again, I ask for help.
  Thank you
  Chris

  Hello

  Go to the following site.

  File Association fixes for Windows 7 - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/

  In the blue box, click on the item in folder and download the file to your desktop.

  Unzip the file.

  Double-click the folder_fix_w7.reg file to add the information in the registry.

  In the meantime, you can also use the keyboard shortcut to create a new folder.

  Just press Ctrl + Shift + N.

  Concerning

• "Is:java.sql.SQLException error: ORA-01555: snapshot too old: rollback segment number with the name ' ' too small '.

  Hello

  We conduct apply CM which is a failure with the Error: "declared:java.sql.SQLException: ORA-01555: snapshot too old: rollback segment number with the name '' too small'."

  Its in our unique the production instance. I checked on the return parameter. Here are the details.

  SQL > show Cancel parameter

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  _in_memory_undo Boolean TRUE

  _undo_debug_usage integer 2

  UNDO_MANAGEMENT string AUTO

  UNDO_RETENTION integer 40000

  undo_tablespace string APPS_UNDOTS1

  SQL > select max (maxquerylen) of v$ undostat;

  MAX (MAXQUERYLEN)

  ----------------

  637116

  Please suggest what needs to be done to go further.

  
  

  Kind regards

  Prabhat.
  

  Post edited by: 942633

  Hello

  ORA-02067: the rollback transaction or registration required

  As mentioned, you will need to look at the design of the code:

  Error: ORA 2067
  Text: rollback transaction or registration required
  -------------------------------------------------------------------------------
  Cause: A failure (typically a trigger or a stored procedure with several updates remotely) has occurred, such as the execution of all or nothing from a previous call to Oracle cannot be guaranteed.
  Action: return to a previous point of backup or restore the transaction and resubmit.

  ------

  ORA-01555 caused by the following SQL statement (SQL ID: 5y0q4u8r2hdy9, query term s = 637608, SCN: 0x0bcc.4ed82762):

  ------

  ACTUAL SIZE [MB] UNDO UNDO RETENTION [s] NECESSARY UNDO SIZE [MB]

  ------------------------                   ------------------------------------------------------------------------- ------------------------

  304849 40000 267232.292

  To better help you, please let us know:

  -What is the function of this program.

  -Did you recently parameter changes until you have this error.

  Please ensure that the validation controls are implemented correctly, the DBA team and development will work hand in hand.

  Thank you &

  Best regards

• How to put in a table the names of the children in the container object?

  I can't get to a function that will collect the names of children in a container of objects and put them in a table.

  Any ideas?

  For example:

  function collectChildren(container:DisplayObjectContainer):Array {
       var len:int = container.numChildren;
       var array:Array = [];
       for (var i:int = 0; i < len; i++)
       {
            array.push(container.getChildAt(i).name);
       }
       return array;
  }
  

• create file with the name of file with today's date

  Hello
  is it possible to create a file with the current date? In fact, I want to take backup of my oracle schema every day with the name of the file including the date...

  You can use the syntax below,

  exp = orcl_ file ' date of +%Y%m%d%%H%M%'.dmp

  Thank you

• Change links Panel to edit with Option in Lion of the Illustrator EPS files?

  We are upgrading to CS4/Leopard Lion/CS5. In our old OS Leopard we could establish files eps Illustrator open with Illustrator and PhotoShop eps files to open with Photoshop via the Get Info/change feature all. Since the update to Lion, it seems that we can do is no longer? If I change to an Illustrator eps, when I go to change a PhotoShop eps it changes it back then all the Illustrator files open in PhotoShop. I realize that the recommeded to save right now the Illustrator files option is as .ai files, but we have 17 years worth of logos customer Illustrator on files that are all in .eps format. Is there anyway to force the system to recognize them as such so that when we use the function change with in the links Panel, we can open it in the appropriate program?

  To answer the question: Yes, it will work to in InDesign. InDesign relies on the Finder or Explorer to open files related, which depends in turn Soxy do - so if you are "First Edition" on a link to a file imported, EPS Soxy will (default) intervene and ensure that the EPS opens in Illustrator or Photoshop.

• Create table of all the names of files in the target folder on the desktop using ExtendScript?

  I am trying to write a script that will watch a folder target on my computer and retrieve the paths for each of the files inside this folder and then store them in a table. This table will be then available later to add paths to the individual files in target comps. So far I have failed to find ways to achieve this, is it possible to say ExtendScript to create a table based on the contents of a finder folder?

  Thank you!

  Once you have the file, this will give you a table of all the files (and folders) in the folder:

  myFiles var = myFolder.getFiles ();

  Dan