Similar Questions

• Quality of the poor dynamic linking with GPU acceleration

  I have a model of dynamic link (with transparency) which apparently in the Source monitor and fine in my calendar, until I drop a clip below. When I drop a clip in my timeline (native 5 D Mark ii images), the quality of the model of EI in the transparent areas to semi-transparent is terrible. It becomes very blurred. I tried the two GPU CUDA and OpenCL acceleration modes. I get the same result with each. When I use the software only everything seems normal. Is this a bug or a limitation? Is there something I can do to keep the advantage of gpu acceleration?

  iMac 27 "(fin 2012) i7 3.4 GHz, 32 GB Ram, NVIDIA GeForce GTX 680MX 2048 MB"

  OSX: 10.9.2

  Premiere Pro v 7.2.2

  AE v 12.2.1.5

  310.40.25f01 v 8.24.9 Driver GPU

  CUDA v 5.5.47

  Here is a picture to show what I mean:

  

  Uncheck the Composite lining color in the sequence settings.

• I recently turned from a PC to an IMac.  I use Lightroom 5 and I can no longer open older videos or import videos from my D7100.  The error I get is "dynamic links media server has encountered a problem.  Anyone know a fix or will be updated into the ligh

  I recently turned from a PC to an IMac.  I use Lightroom 5 and I can no longer open older videos or import videos from my D7100.  The error I get is "dynamic links media server has encountered a problem.  Anyone know of a patch or upgrade to Lightroom 6 will fix the problem?

  Hey billo,

  Could you please check and confirm the version of Lightroom you use?

  What operating system do you use?

  ~ UL

• Can I turn on video greenscreen in video with a transparent background (instead of default black arr.plans

  Can I turn on video greenscreen in video with a transparent overlay on another video in another program background.  probably export to avi.     I know that I can't in sequels but uncomfortable with the first.   I basically want to turn the greenscreen of a black Windows to cs6 body transparent background
  

  [email address removed by the host of the forum]
  

  Prejudice is correct. It would be better to modify in the program where you hidden green. However, if you really must...

  DPX is one file per image. Although you are not able to open it from Windows, it is only because Windwos was told not to open them in Photoshop.

  The point of the whole of the DPX file is to have a storage visually without loss of your executives that is designed to be used between applications (just what you want to do): http://en.wikipedia.org/wiki/Digital_Picture_Exchange

  However, if you prefer to use another option you are most comfortable with, you can use the PNG.

  Or...

  If you insist on a single video, use the codec for Quicktime Animation.

  In all cases, you need to an image format or a video CODEC that can store an Alpha channel.

  Or...

  Export the video with black and use a Luma key in the next request.

  Or...

  Export the video with black and then export a video of just the alpha channel as a picture blabk and white where black is transparent when it is used as cache by approach, and then in the next application use video of the alpha channel as a cache by approach.

  Since you have not said what is the other application or why you want to use it, we have a little trouble with a specific solution.

• Effects of lightsaber using the dynamic link with Premiere pro and After Effects CS4

  Hi all

  I'm working on a video project and that you want to add a lightsaber effect, but a layer which is suppose to be transparent isn't using dynamic links.

  I shot the video in my head, and everything else hidden.  I made a flash body to put my head on.  Now I know how to make a lightsaber in After Effects CS4. (starting with comp 1 with videos making a white solid layer, and then using the tool pen to make the sword.  Then copy the sequences video and place it in comp 2.  Then to return to comp 1 and remove the video sequences. then on comp 1 making a SOLID BLACK LAYER {that's the problem} and place it under the layer of white.  Then duplicate the white layer 3 times.  Changing each feather white layer mask to make the glow.  so going to comp 2 and take the 1 model and her nest to model 2...  Then change the blending mode of the model nested 1 to the screen.

  The main timeline in Premiere Pro CS4 and I have the video layer 1 to Photoshop file which is pink and the background of this project.  I made a dynamic link to After Effects and copied and pasted the video images and flash to the comp.  Here, I made the lightsaber.

  That is the problem.  The model of dynamic links with video, flash and the lightsaber will not show my pink background in Premiere Pro shows him my video, flash and lightsaber but the background is black.  In case of problems, I noticed if I turn off the LAYER BLACK for the lightsaber effect, I see my pink background with video and flash sequences and the glow of sabre, but my blue lightsaber color will not appear.

  Do more problems I set photoshop to lightsaber model file and I see the video, the flash, the lightsaber but I think because the background is pink I don't get a color glow to the sword (vilot color)

  If the layer of black is supposed to be transparent, so why can't see my background in Premiere Pro using dynamic links?

  appreciate any help I can get,

  Thanks in advance.

  Mr. PETER K

  P. S. - one-way I kinda had this work was I took one of the masks of white and copied and pasted layers in nested layer comp 1.  Adjusted to the width of the mask and the pen and I got a glow of blue ok.  You just can't mask width too because it shows a lot of black.  It is not as good as I want and I hope someone can help...

  Thank you again...

  Well, blend modes don't create transparency, so the behavior is correct - because technically, the background of the model is ignored for the mix of operations, in areas where there are no content below for the mix, only the layer of black color is used. You create transparency good, real luminance based on unmultiplying, that can be done with the Knoll Unmult plugin Red Giant Software (free) or the effect of changing the channel of the AE monitoring bey a color delete effect.

  Mylenium

• Make dynamically linked AE comp

  If I insert a model based on dynamic rendering first, what is the best way to get it to playback in real time?

  If I make it at first, it seems to take much longer than if I make it in AE.

  If I do a RAM Preview in AE, that will transport you to the thread at first?

  I want to keep the momentum.

  The best way to get AE composition reading real-time dynamically related complex in PrPro is to make a digital intermediate After Effects output and replace your model dynamically linked in PrPro chronology than DI. If you keep the box include the projects link in the settings of AE active output Module dialog box, you can easily return to your publication and make changes - just select the DI in PrPro mounting or the project Panel, right-click and choose Edit Original. However, you definitely lose this way dynamic update. Therefore, this option is for the hour when you are finished with your magic in After Effects.

  Another option, which can keep you more dynamic, puts an intermediate rendering as a proxy for your dynamically linked composition. In this way, you can enjoy the best of both worlds to some extent: do not replace anything in the chronology of PrPro, while switching between DI rendered and editable composition is a simple click in AE. Another advantage is it do not make an intermediary off AE directly, you can send your comp to SOUL and return on a background all to continue working at AE on another part of your project (don't forget, you lose the ability to include project link in metadata say, where the ability to right click and choose Edit Original in the PrPro project when rendering of the SOUL).

  Because PrPro communicates with AE compositions dynamically linked via a single instance of AE without head, which in turn creates a bottleneck, reading with say set as proxy for comps related dynamically is slower compared to then linked dynamically comps are replaced by say them PrPro chronology.

  Another thing, who is worthy to be aware of, is that you should keep the amount of comps linked dynamically reasonable. With hundreds of dynamically linked comps PrPro project becomes almost insensitive and takes forever to make (for my sequence of 30 min of test platform built in 935 comps linked dynamically, which are just source footages in their own compositions, therefore, equivalent to rendering proxies, is set to say about 27 hours to render, whereas 30 min sequence built off the footages 935 source even renders in real-time).

  And finally, no, visited RAM Preview is not used by PrPro.

• the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

  Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
  Error messages have been
  (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

  A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
  Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
  All solutions?

  I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

  Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

• flattened draw without border and transparent background pixmap

  Dear members of the Forum,

  I am completely new to LabVIEW and use especially for graphic animations.  I want to build a multimedia graphic where parts are dynamic (i.e. they change from red to green to indicate stopped execution of State respectively).  Some graphics that I found that is a tank with level controls and I intend to use these but I need to draw my own graphics and make them animated.  Most will be two binary States (i.e. red green) simple changes.

  I found the 'Pixmap.vi flattened draw' and have used it to make a simple graphical change of two States (see attached vi).  The problem I have is that I don't want the border to be shown in the graphic image and I want to make the background transparent.  I've saved the file .jpg with transparent backgrounds but they come out with a white background.

  Can anyone provide some simple explanations and advice please.

  Concerning

  Bunnykins,

  Use the tool Palette. Go to the color tool. Click on the squares of color in the palette, and then assign the Foregraound and the background of transparent colors (white box with T top left when the color window is visible). Click the tool both on substance and on the border. Sometimes you may need to try several times on the border ge the exact position for the click.

  Note that this makes it difficult to find the control, so make sure it's in the position you want and as you like before you make it transparent size.

  Lynn

• McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

  McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
  Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

  [Moved from comments]

  Hey Carol,.

  It would help if you could answer these questions.

  -What version of Windows is installed on the computer?
  -What antivirus software do you have on the computer?
  -When you get this error? It is when the computer starts for the first time?

  Here are a few troubleshooting steps that you can try to get the matter sorted.

  First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

  used by Mcafee and could be the reason for the error.
  Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

  If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

  Make sure that the computer is virus-free.

  Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  Note: the steps mentioned in the link applies to Windows vista and Windows 7.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Let us know the results.

• What the devil? Error: The procedure entry point? detac3@ListData@@QAEPAUData@1@XZ couldnot be found in QtCore4.dll dynamic link library.

  I hope I'm in the good topic section. My computer feezes. I restart or turn off & that is what happens.                                                                                       Error: The procedure entry point?  detac3@listData@@QAEPAUData@1@XZ not found in the QtCore4.dll dynamic link library.                                      He also does this whenever I turn on my computer, even if it does not freeze. I was told that I have to use my CD to get into windows XP, but I have no idea where I put it. What now? Oh, I'm computer illiterate, so stupid it upwards!

  Hi Budge3263,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  QtCore4.dll is part of the development environment for a number of applications, including Photoshop Elements.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• the procedure entry point is not found in the library of dynamic links SHLWAPI.dll / unregistered class?

   I found a question similar to this but need more specific assistance. As I turned on my computer, a window pops up saying "the entry point of procedure not found in the library of dynamic links SHLWAPI.dll." This message has not left since and my computer let me just open google chrome. I have not tried to install anything lately. I tried what was suggested on a similar response - the sfc / scannow command-, but when I tried, it said I had to be an administrator. This confuses me because there is only a single user account on this computer so I assumed it was the administrator. When I tried to open the control panel to check, my computer would not leave a message with a lot of random numbers and letters and 'class not registered' jumped upward and me. I'm really confused and need help!

  Hello Elle1234,

  Looks like DLL file or the missing link between the Dynamic link Library & the missing registry entry. To replace the Dll files missing please go ahead and run the scan by following the simple steps below using the System File Checker tool and check if it does the trick.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this review helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• So where can I find custom dynamic link libraries to ensure that they are linked to trusted applications?

  Log name: System
  Source: Microsoft-Windows-Wininit
  Date: 27/05/2016 05:56:11
  Event ID: 11
  Task category: no
  Level: WARNING
  Keywords:
  User: SYSTEM
  Computer: SearchMachineRevistied
  Description:
  Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      11
      0
      3
      0
      0
      0 x 4000000000000000
     
      44137
     
     
      System
      SearchMachineRevistied
     
   
   
      0
     
     
   
  

  Nothing in Event Viewer, journal should defy explanation.

  Your system of driving wrong way or did you just noticed this in the event log and I wonder why see you?

  That the message trying to tell you is that your system is told to find and load at startup what are probably dll of third part of something you have installed is just an informational message / warning.

  It is possible that something you have installed/uninstalled in the past might have used this feature of Windows that you can read here if you're interested:

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/dd744762%28V=vs.85%29.aspx

  You can check to see if there are all the dll specified for load and if there is not, turn off this thing and you will not see the message more.

  You have to look in the registry to see what is happening, and since there is no cancellation or exit without saving the changes in the registry editor, you should first do a manual System Restore Point and consider backup of your registry with the free and popular tool:

  http://www.larshederer.homepage.t-online.de/ERUNT/

  The click the Start button/orb and enter in the box:

  Regedit

  And choose to run as administrator the Registry Editor:

  

  Then navigate here:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows

  The AppInit_DLLs value is where none of these DLLs are specified and if yours is empty (which means that there is no dll to load) just tell Windows not to attempt to load something that does not exist.

  Check the value of LoadAppInit_DLLs and if it is set to 1, double click it and change the value to 0 (zero), close the registry editor, restart and double-check your event viewer.

  

  Is there something in the AppInit_DLLs field (a comma or space separated list of DLLs) then you should leave things alone because they are there for a reason any and accept the fact that you will see the informational message whenever your system boots.

• ArcCon_GetConnectVersion is not found in the library of dynamic links ArcCon.dll

  Actual title: ArcCon .ac-Entry Point not found error

  Hello, I get the error "The ArcCon_GetConnectVersion be found in the library of dynamic links ArcCon.dll" every time that I reboot my laptop.  I tried to uninstall my ESPON scanner software and reinstall. It eliminates the error when the computer is turned on but whenever I restart the system, I get the same message as previously wrote... Please help me to remove this every mistake of banner of 5 sec.

  Thank you

  Frank M

  Hello

  -Did you do changes on the computer before this problem?
   
  I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 7 in binding boot is a way of putting your computer to normal startup mode.
   
  Hope this information helps.

• How do I preserve my transparent background in the export of EI at first?

  Morning

  I'm working on an iMac (21.5 inch, mid-2014, OSX Yosemite, 10.10.5, 1.4 GHz Intel Core i5, 8 GB 1600 MHz DDR3 graphics card Intel HD 5000 1536 MB with Adobe full CC, after effects CC 2015.2 version, Version 13.7.2.3)

  I am working on a project in Premiere Pro and brought a small clip of animation I created with green screen.  I got the key in AfterEffects, and everything is as I hear it - the face of a man on a transparent background, spill suppressor applied.   It looks great.

  Now, I am trying to export this picture to PremierePro to be inserted in the sequence, but it's turning black transparent background, which I can't delete.

  QUESTION: How do I preserve my transparent background in the export of EI at first?

  Thank you!

  Rob

  [Left the lounge general Forum, troubled for a specific product - Mod support forum]

  Answered my own question.  As usual, the answers are found via a Google search with a specific question.  There are these people very WELL over there people showing the way.

  I entered in the header of this question,

  How do I preserve my transparent background in the export of EI at first?

  Got several tutorials.  It's all answered here by wilt to Nick: How to export A video with A Transparent Background in After Effects - YouTube

  Thanks, Nick!

• No transparency background in the artboard Mode PS 2015.5.0

  Hello

  Since the last update, I found a very strange bug. When you create a new document with transparent background, everything seems to work fine. The document is created with a transparent background. However, if I turn this document into one (or more) artboard (s) the background becomes white. There is no layer in the layers panel. If I place any object in the work plan and the export in PNG transparent, it will show the white background in the exported file.

  I work for several years now with Photoshop and I don't think it's a fault on my end, as it seems to happen only after the update. If I'm missing something please let me know.

  This makes basically useless for me at this stage PS because I work a lot with transparent graphics for the web.

  See you soon,.

  Bryan

  We discuss making it the default transparent when we passed the basic model plan of work. He was well regarded as reasons to make the default white background opened in 2015.5:

  (1) we wanted to preserve the visual experience of existing documents. Imagine that you did you worry about the backgrounds and then opens your document after the upgrade and all your different work plans.

  (2) all of the users who work with transparent backgrounds is small compared to those who use the default background (white).

  The change of model led us to make a choice when you upgrade to the new version of the document. We chose (1).

  Unfortunately for you, your workflow is defined in (2). Fortunately, it's easy to fix. If you have not discovered it, you can select all your artboards in your document and change them all to transparent at the same time. You don't have to go one by one.

  You make a good point that maybe we could have missed the transparent work plans if the document has a transparent background. Unfortunately, this calculation is not as easy as you might think to do things. It would have taken time away from other work, and it would have introduced a level of unpredictability when opening existing documents (Board graphics settings default to white, except if the current context is transparent, if there is an existing context, etc. etc..).

  It was a judgment call.