Similar Questions

• Is FDMEE runing through the user interface or batch process?

  In an event of jython script, how can I determine if the FDMEE process is run through the user interface or as part of a batch?

  Use the method getBatchJobDetails (BigDecimal pLoadId) API, if it returns a result set, then there a batch process, if it is not it is not.

• Dynamic transformations (Case statements) conducted through the user interface

  Hello

  I have a vision that a lot of business logic with values coded hard and would like to re - design the view make the transformation of dynamic business logic. I would like to give an example to tell the requirement in detail with the example below.

  Example SQL view: -.

  SELECT

  A.EMP_ID,

  A.EMP_NAME,

  BOX WHEN A.STATE = 'CA' AND A.DEPT_CODE = "C123" THEN 10 '

  WHEN ELSE A.STATE = 'NJ' AND A.DEPT_CODE IN ('N111', 'N454') AND A.GRADE = 'AAA' THEN '08'

  ELSE END '00' AS TAX_RATE,

  CASE WHEN A.JOIN_DT > = '20010101' OR (A.EMP_ID IN ('E134', "E456") OR A.DEP_CDE IN ('C222', "F222")) THEN '30'

  WHEN of OTHER A.JOIN_DT < '20010101' OR A.EMP_ID IN ('J133', "K556") THEN '20'

  ELSE '10' END AS BONUS_PERCENT

  A.ADDRESS

  FROM EMP A

  WHERE A.END_DATE > = '20000101'

  AND NVL (A.DEL_FL, 'N') = ' don't

  AND EXISTS (SELECT DEPT 1 D)

  WHERE D.EMP_ID = A.EMP_ID)

  Result: -.

  
  

  I wish I had the TAX_RATE and logic BONUS_PERCENT dynamically generated fields which has a lot of statements of case and hardcode, where the USER can change the logic and its values according to rank.

  To do this, we can design a table EMP_BUS to have fields that can be modified and the transformation of the UI logic. Please share your ideas in the design of the table or the applicable...

  Thank you in advance.

  Hello

  One way is to have all the settings defined by the user that is stored in a global Table Temporay and join at this table in your point of view.  The advantage of a global temporary Table is that each session has its own set of parameters which does not interfere with the other, so you can have multiple sessions using the view at the same time, and everyone will see the results based on its own parameters.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  If you ask on a DML statement, such as UPDATE, the sample data will be the content of the or the tables before the DML, and the results will be the State of the or the tables changed when it's all over.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Input values default settings for a workflow run through the REST interface

  Can someone give me an overview here, I have a workflow configuration that takes a series of input parameters, most of the time the default values (defined through the presentation tab) are correct, so I hope not not to be specified in each request only on exception

  How can I call the workflow to execute with other api provides only the settings I have and leave the value default those to do their job?

  There is a REST API for presentation and execution of workflow.

  So, you can use presentation REST API to create/update presentation running, providing only the necessary parameters. As a result of these API calls, you will get the values for all time settings (those you passed to the call) and those calculated by your presentation logic. Then, you can call the REST API by passing all values returned by presentation REST API for the execution of workflow.

• By the way of dynamic target through the interaction of the value

  We have a requirement where if we click on the data in the column having prj didn't it must navigate us to one of the two reports on a dashboard page.
  
  How we can program & so that we can choose what page it should navigate to.
  
  We are currently navigate/change the value by using properties of column > column Format > value interaction > Type: Navigate.
  We provide the target this way, how can we make this as dynamic target path.
  
  Thank you
  Pankaj

  Hi John,.

  Add 2 reports of navigation of the interaction of the value...
  And give captions for 2 report identified by user must select which report...
  Now, whenever you click the project No. It shows 2 reports to navigate...
  Now, click on the desired...

  Hope this is what you want...

• get the error of bb - hostsvc.sh through the html interface

  When I try to click on an alert in html pages (any condition, red, yellow, green, clear, purple), I get the following error;

  ERROR!
  BB - hostsvc.sh called with invalid arguments

  the link looks like in below (redacted identifying information)

  http://myBBserver.domain.NET/CGI-bin/BB-hostsvc.sh?HOSTSVC=myBBclient, domain, net .disk & DISP =

  Someone at - it get this before? If this can help, based on a previous post of discussion, I have re-directed the bbconfig to solve a problem where my BB server not detected as "redhatES", but rather just generic "linux". I think it's where things broken, but not sure yet how to diagnose it beyond.

  Under $BBVAR/logs, I see the data I expect to see (shown below), so I know that the monitors are send the data successfully.

  $ cat myBBclient, domain, net.disk

  Yellow kills Nov 22 13:45:46 THIS 2011 - drive on myBBclient.domain.net to the warning level

  & Yellow /apps (91%) has reached the level of WARNING defined space (90%)

  1024 - filesystem blocks used available capacity mounted on

  / dev/sda1 256666 17036 226378 7% / Boot

  / dev/map/vg_root-lv_tmp 516040 31448 458380 7% / tmp

  / dev/map/vg_root-lv_root 2539312 1515716 892532 63%.

  / dev/map/vg_root-lv_home 1032088 54064 925596 6% / Home

  / dev/map/vg_root-lv_var 2064208 179532 1779820 10% / var

  / dev/sdb1 20635700 17789940 1797524 91% /apps

  / dev/map/vg_root-lv_opt 6192704 1356652 4521480 24% / opt

  Status unchanged in minutes 15.02

  Status message received

  probably the umask on behalf of BB.

  should be 0022

  or

  change the group to bbvar/logs to web server group id (unless the files are create user read-only, then you certainly need to change the umask of the user of BB)

• have a cisco CISCO2106 wireless controller. I have configured mangement interface and AP-Manager in this. I can now connect to WLC, through the management interface, but the problem is AP-manager interface to SURVEY not so AP aren't the assoc

  

  What do you mean that's not upward? Can you please upload config and debug? What output do you see on the side of the AP using the console port?

  What is the method of discovery?

• How to get an array of integers to user in the User Interface

  Hi all. I'm not a very experienced user of the CVI. I have almost exclusively coding in LabVIEW but have a client who wants all of their work in the CVI.

  I've been very fruitful so far (set up a Modbus API from scratch that supports all types of connection) but am confused on how I can get the integer multiples of the user without limiting the number of integers I can get. Essentially, I need to be able to get an array of integers to the user.

  General information, I am building a user interface to test my Modbus API. There are Modbus functions to 'Write multiple registers' and 'write multiple coils. I want the user to be able to enter all the values they want to write in one command.

  What is the best way to get an array of integers through the user interface?

  The easiest way is probably to allow user input in a textbox control numbers: items can be separated by spaces, commas, or even a line break (using ctrl + Enter). You will then need to extract the string from the TextBox and analyzed for numeric values using any non-digit character as a separator: strspn (string, '0123456789'); can be used for this.

  More complex, another possibility is to use a table control to receive user input: you Dresses an empty table with a reasonable number of roews, or you need some codes to add new lines as long as the user fills all those already existing. On the other hand, it will be easier since data recovery in a simple statement, you will all return values: GetTableCellRangeVals (panelHandle, PANEL_TABLE, VAL_TABLE_COLUMN_RANGE (1), table, VAL_COLUMN_MAJOR);

• NAS200: Unable to connect to the Web Interface

  Just set up my new NAS200.  I could install two (2-1 TB disks, RAID1) disks and set the IP address.  However, I can not connect in the administration area of the drive to set up users, shared directories, etc..  The doc on the CD has no value.

  When I run the initial Setup, I wonder for a pawword.  I enter the password that I entered in initial Setup, and I get.  However, this leaves me not do anything other that configure stuff of basic training.

  Someone at - it suggestions?

  Thank you.

  mechanism

  I was able to eventually get through the web interface.  It turns out that the system was not ready yet.  I have 2 1 TB drives in a RAID-1 configuration, and it took the best part of 2 days to get into shape.

  Once I was, I updated the firmware, and things seem to be working very well now.

  mechanism

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Cisco 527W - how to disable the LAN interfaces

  Hi all

  Just want to know if there is a way to disable these routers of Cisco 527W LAN interfaces. Looking through the configuration interface, it does not seem an option for this.

  Also I have problems to connect to the router via SSH or Telent. When I put the password it says "access denied." But the password works for the web interface...

  Thank you...

  In my experience, no way at the moment.

  Kind regards.

• Telnet on PIX with the external interface

  Is there a way to telnet in PIX Firewall through the external interface?

  SSH is a valid method to access the site, but I wonder if there is another way to do it. PDM is another tool for access and modification of the configuration.

  Any help will be useful.

  Best wishes

  Onur

  I'm pretty sure that Telent directly to the external interface of a PIX is not available. It is such a big security risk that it is not offered as an option.

  SSH is a much better way to go (even if it's only SSH1).

  You can probably VPN in your network and Telnet from inside.

  Good luck

  Scott

• VPN via a different interface of the "outside" interface

  I have two ASA5510 each with two external interfaces, we're connecting to an ISP for the Internet and the other connects to an MPLS network. And I have the LAN on the interface of "inside".

  In my lab, I have each external interface connected to a separate router, and the router connects to an another ASA5510 who will be at the other end of the VPN.

  Enough of this scheme:

  LAN
  |
  |
  |
  |
  ASA--------------
  | defaultroute | specificroute
  |                       |
  |                       |
  |                       |
  Router router
  |                       |
  |                       |
  |                       |
  | defaultroute | specificroute
  ASA--------------
  |
  |
  |
  |
  LAN

  I bring a VPN on the interface either as long as I get the interface default route (0.0.0.0 0.0.0.0). So it seems that the configuration is correct. But given that I have only one default route, I can never raise the second VPN.

  I have a static route pointing to the peer through the correct interface and next hop for the second VPN IP and can ping and traceroute to the public address just fine so routing is correct, but...

  whenever I ping from LAN to LAN to make appear the second VPN log just shows it as an attempt to create a translation.

  It is as if it does not have it as "interesting traffic" but as a regular traffic to the Internet.

  Any thoughts on this?

  Thanks in advance.

  Hello

  If you need to configure the tunnel interface on the ASA (ISP or MPLS)... While you apply the card encryption on both interfaces.

  Then... routing will take care through which interface to negotiate the tunnel.

  Say that the remote site has this configuration:

  Public IP = 1.1.1.1

  Remote LAN = 10.1.1.0/24

  You should have this:

  Route ISP 1.1.1.1 255.255.255.255 NEXT_HOP 10

  Route MPLS 1.1.1.1 NEXT_HOP 20 255.255.255.255

  Route ISP 10.1.1.0 255.255.255.0 NEXT_HOP 10

  Route MPLS 10.1.1.0 255.255.255.0 NEXT_HOP 20

  In addition, configure IP SLA.

  Whenever the ISP interface goes down, the ASA will attempt to negotiate the tunnel via the MPLS interface (because is one that can be used to reach the other site).

  Federico.

• ASDM does not work in the external interface

  Hello

  I'm new to ASA. I have ASA 5510 and strives to enable ASDM access through the external interface. but is not working for me... not. I set up a public ip address on the external interface and activated the ssh and asdm. SSH works but asdm does not work. This is a test environment, so I have not yet set up an ACL.

  VPN-TEST # show version

  Cisco Adaptive Security Appliance Version 8.2 software (1)

  Version 6.2 Device Manager (1)

  Updated Wednesday, 5 May 09 22:45 by manufacturers

  System image file is "disk0: / asa821 - k8.bin.

  The configuration file to the startup was "startup-config '.

  VPN TEST up to 4 hours and 33 minutes

  Material: ASA5510, 1024 MB RAM, Pentium 4 Celeron 1600 MHz processor

  Internal ATA Compact Flash, 256 MB

  BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  Start firmware: CN1000-MC-BOOT - 2.00

  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04

  0: Ext: Ethernet0/0: the address is d0d0.fd1d.8758, irq 9

  1: Ext: Ethernet0/1: the address is d0d0.fd1d.8759, irq 9

  2: Ext: Ethernet0/2: the address is d0d0.fd1d.875a, irq 9

  3: Ext: Ethernet0/3: the address is d0d0.fd1d.875b, irq 9

  4: Ext: Management0/0: the address is d0d0.fd1d.8757, irq 11

  5: Int: not used: irq 11

  6: Int: not used: irq 5

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  SSL VPN peers: 2

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  VPN-TEST # http see race

  Enable http server

  http 0.0.0.0 0.0.0.0 outdoors

  VPN-TEST # display running asdm

  ASDM image disk0: / asdm - 621.bin

  enable ASDM history

  Could someone please help me know what Miss me?

  Kind regards

  Praveen

  That's it, please add any combination of encryption by using the command "ssl encryption" algorithms, please add them in one line next to each other, and you can use '? ' to check available combinations.

  Kind regards

  Mohammad

• Change the Port Group Namespace for autonomy through the API?

  Work with vShield / POSSIBLE 5.5.0a.

  Take a group of ports which, out of the box will have a default namespace. As a result, you see the following menu items and information:

  

  By clicking on the Stand-alone namespace change link is there for that. We now have a group of ports with the stand-alone namespace and the additional menu tabs, firewall App and SpoofGuard.

  

  I can of course change for autonomy through the user interface, but can not find the equivalent API calls in the vShield API Programming Guide to do it programmatically. Can someone please advise on how to do this via the API?

  Thought that I would realize, since I figured this out in the end - a case of RTFM! Namespaces to appear in the Guide of programming on page 186, but there is no explicit mention of the way to make a group of independent ports. However, after revisiting the guide the penny dropped that adding a space of names to the data center is the equivalent of the evolution of a group of ports to a stand-alone namespace. Once you enter that (may be more obvious to you, it was for me), the examples in the guide can be followed.

  So to change ports for the autonomy group namespace, you must do the following:

  Https:///api/2.0/namespace/datacenter/ POST

  dvPortGroup-xxxxx

  Make sure that the content type is set to application/xml, text/xml (which has worked for me in the document) and not in the contrary case, it fails with a complaint about content type.