Dynamically add more values to existing poplist

Similar Questions

• How to use Boolean as a constant push to add more values

  Hello everyone, I am trying to use a Boolean OK button and a constant to do something similar to the calculator project that I read in other posts. I scored $1.00, $0.25, button...  So now.  I just want to add the value of an indicator whenever I press the button.

  Is the closest I can get is displayed while I hold the button in and it goes to 0 as I realese it. I want that it add up every time his press.

  Thanks in advance

  Kevin

  Hi Kevin, this is Paul of engineering Applications at OR.  Try something like in my attachment.  You can use instructions of type of case to determine if a key has been pressed, and then assign this case real value.  Good luck with it

  .

• Add the Value property in the ATG import feature

  Hello

  When we try to add more values to the list via the import BCC option property, the old values are deleted and the new values are added. We need to have the old values and new values for the property.

  For example,.

  34345 product, sku 74747 is already mapped in the childSku. We try to add 74748,74749 Sku of as childsku via the import of the BCC option. The old value 74747 is replaced by 74748,74749.

  But the expectation is that we have all three references 74747,74748,74749 to map to 34345 product sku.

  Got the solution documentation below

  http://docs.Oracle.com/CD/E26180_01/platform.94/ATGMerchandisingUserGuide/HTML/s0606formattingafileforimport01.html#s0606formatforaddingitemstoacollectio01

• Add more disk space for the ESX host

  Hi all

  I need to throw more disk space to my ESX hosts.  I know how to bind records in Navisphere and present to the ESX host.  Once in the VI client, I "think" I need to go to the host and do a rescan of the HBA or something like that?  I'm a little unsure of the market of part VI to add more disk space.  Could someone just point me in the right direction?  Please note that I am looking to add more disks to existing hosts in existing clusters.  It adds no storage to a new host... rather an existing one.

  Thank you

  Jonathan

  You are on the right track.  Re-scan storage card, under the configuration tab select storage adapters, select the adapter and click on the link of the new analysis.  Then go to the storage section and there should be a link in the top right of the screen that says storage Add.  Click on that and it will guide you in adding/setting in form/naming of the new disk.

• Add more dynamic events registration refnum

  Hello

  I have a wire that passes Event Registration refnum to my structure of the event. This thread is from VI, that I don't want to touch. He spent recording for the cluster of user events.

  I would add more dynamic events to the refnum (but not to the cluster), so I would like to re-record with the addition of new events.

  When I'm passing this refnum to block 'Register for events', LabVIEW does not allow me to expand this block and add new events, which I think is understandable.

  How can I add more dynamic events to the refnum?

  Close, but no cigar.  When you add user events, you want to be sure that every event has a unique name, then name your constants defining the events differently (as shown here).

  

  Bob Schor

• to add more fields to a report just below existing fields

  Hello
  

  there is report in which the following fields are displayed
  
  jobnumber   customername  rig              well  
   124             abc                 r-90            w-10
  
  
  the requiremnt is to add more fields  and place them just below the above fields
  this enitre thing is in  a main frame  say M_GP
  the job number ,customer name is in another main frame  say M_HD
  and the data 124 etc is in a  repeating frame R_date
  
  ie M_GP encloses M_HD and R_date
  
  kindly guide as to how to include the remaining fields just below these fields so tht the 
  output looks like this
  
  jobnumber   customername  rig              well  
   124             abc                 r-90            w-10
  
  contract    material SIR service_SIR     Service_or_num
  12455         48878        9909090           28278
  
  all these fields r part of the same query and same table
  
  
       select OPN_JOB_DESC  "Job Number",
  ENTRY_DATE "Date",
  RIG "Rig",
  WELL "Well"
  ,JOB || '-'  || JOB_TYPE  "Job Type",
  CUSTOMER_NAME "Customer",
  SERVICE_ORDER_NUM "Service Order No:",
  MATERIAL_SEQ   "Material SIR",
  SERVICE_SEQ      "Service SIR",
  CONTRACT           "Contract"
  from xxnp_opn_joblog_001
   where OPN_JOB_DESC =:P_JOB_NUMBER

  kindly Guide
  
  thanking in advance

  Hello
  Keep the labels and fields both repeating frame and define the position that you have demonstrated.

  -Clément

• Dynamically add UIComponent without refreshing entire page (JDEV 11.1.1.3)

  Hi all
  I have this problem.
  
  I need to dynamically add an element within a page without refreshing entire page jspx.
  
  For example, look at this page:
  
  
  Titus: _
  Name: _______
  Job: _ (+ add more jobs)
  
  When I click on (+ add more jobs), I add a new RichInputText:
  
  private RichPanelBox pb1;
  
  public String cb1_action2() {}
  RichInputText rc = new RichInputText();
  rc.setId (...);
  [....]
  This.PB1.GetChildren (). Add (RC);
  Returns a null value.
  }
  
  The field is displayed properly on the page, but the system do a full refresh and lose your position on the page.
  
  Obviously becomes inconvenient for the user to have to scroll the page up to a certain point where it was before.
  Is it possible to avoid this problem and to add the field without a complete refresh of the page?
  
  Thank you
  Cristian
  
  Published by: on February 11, 2011 baol 7,53

  Try with PartialSubmit for the button and use PPR as follows:

  JSPX Code:

  
  
  
  
  partialSubmit = 'true '.
  actionListener = "#{SamplePageBean.onAddJobs}" / >
  
  
  
  
  

  Bean code:

  public class SamplePageBean {}
  private RichPanelBox panelBox;

  public SamplePageBean() {}
  }

  {} public void onAddJobs (ActionEvent actionEvent)
  RichInputText richInputText = new RichInputText();
  richInputText.setId ("Id1");
  richInputText.setLabel ("Job Title");
  this.panelBox.getChildren () .add (richInputText);
  AdfFacesContext.getCurrentInstance () .addPartialTarget (this.panelBox);
  }

  {} public void setPanelBox (RichPanelBox panelBox)
  this.panelBox = panelBox;
  }

  public RichPanelBox getPanelBox() {}
  After a return;
  }
  }

  Thank you
  Nini

• Q: very simple you can add more than 1 table to a Word report? -If Yes, how

  Hi all

  As described in the topic, is it possible to add more than 1 table to a Word report?

  Very simply, I have some test data in a table and added to my report with the addition of the report table vi.

  I have the same thing again to send data to a different table which I would like to insert in my report in table form. I placed a second addition table report vi directly after the previous vi, but it doesn't work.

  ... Am I stupid? or this function is only meant to be used at the same time? Maybe I need an another vi after adding table vi before you can add another?

  Feel free to enlighten me because I am confused,

  Thank you!

  Change the width of two column Table add to Report.vi from 10 to 1. Setting the value to 10 (unit are inches) will throw an error.

  Ben64

• Does anyone know how I could free more space/add more space to my backup drive?

  Original title: save file/disk

  Dear all,

  As usual, I used part of my hard drive to back up files, etc.

  In my last scheduled backup, windows informed me that he could not perform the cause there wasn't enough space in my backup disk.

  Does anyone know how I could free more space/add more space to my backup drive?

  Thanks in advance

  George

  On Tuesday, October 5, 2010 06:46:38 + 0000, GeorgeMachairas wrote:

  As usual, I used part of my hard drive to back up files, etc.

  In my last scheduled backup, windows informed me that he could not perform the cause there wasn't enough space in my backup disk.

  Does anyone know how I could free more space/add more space to my backup drive?

  Please be aware that the second part of your hard drive backup is
  far the lowest form of backup exists. It is only very
  slightly better than no backup at all, because it let you
  sensitive to the simultaneous loss of the original and the backup on many of
  the most common dangers: drive failure, head goes down, severe feeding
  glitches, near lightning, virus attacks, same flight of the
  computer.

  In my view, secure backup must be on a unguarded and removable media
  in the computer. For backup really secure (required, for example, if the)
  the life of your company depends on your data), you should have several
  generations of backup and at least one of these generations must be
  stored off-site.

  You can read this article on the backup that I wrote: 'save '.
  "Your computer regularly and reliably" to
  http://www.computorcompanion.com/LPMArticle.asp?ID=314

  Ken Blake (MS-MVP)

• How to dynamically add an Option in the drop-down list?

  I have this code:

  {Drop-down list

  ID: list

  Title: 'list '.

  onCreationCompleted: {}

  opion var = new Option();

  opion. Text = "Hello";
  opion. Value = 4;

  List.Add (opion);

  }

  }

  After the launch of the application, the list is empty.

  Why my code does not work?

  It is easy to dynamically add options

  first add this to your attachedObjects:

  ComponentDefinition {
              id: optionDefinition
              Option {
              }
          }
  

  then do something like this

  var newOption = optionDefinition.createObject()
              newOption.text = ...
              newOption.value = ...
              newOption.description = ...
              newOption.selected = ....
              yourDropDown.add(newOption)
  

• Can I add a value of textfeild for the navigation bar entry list label?

  Hello

  I want to show the user name in the navigation in apex5 bar. Here I used a pl/sql code to get the user name of LDAP, authentication and pass it to a textfeild when connect you to the application. HERE pass the user name in the text field correctly. All I want is I want to show the value of text field in the navigation bar (the components shared-> details-> entry of the list concerned list) so, what is the syntax to add the value of the entry list Labeltext field? : P101_USER did not work. Please help me on this.

  ThiliBu wrote:

  Thank you very much for the reply.

  I do not use APEX_USER because it takes the name of the connected user. (as first name + name - string DN. But I really want to take FirstName LastName - String CN) I can get this string value CN to a text field but do not know the way to pass that on the navigation bar entry of the list value.

  Then you can explain a little more. I used & P101_USER. for the navigation-> label list entry bar. But it did not show anything on the navigation bar. Can I use custom for this substitution string. If yes how can I do this.

  For security reasons Login page elements are automatically empty, so P101_USER will contain no value when authentication is complete. Rather than use a Login page element, create a point application called USER_NAME and store the string CN value in that. It can be referenced in the entry of the Navigation bar using the syntax of static text substitution:&USER_NAME.

• Dynamic add to cart

  Hey everybody, just try to see if there's a way dynamically add something to the cart. I see the html code for how works the add to Cart button, but it looks like it uses the ID 'product' to add the product itself. However, I am not able to see how I can retrieve the id of the product if all I have is the 'Product Code' (from {tag_productcode}). These two values are different for non insiders.

  I know that if I work a little longer on that I could just get some ajax to visit the real great product page manually and find add to Cart button and enter the ID of the product in this way, this seems excessive.

  If anyone has any ideas, I would be very grateful.

  With the add to Cart then that.

  I don't know why people do not use the documentation - all that it:

  The developer reference

  {{id}}	{tag_productid}	System displays product ID.
  {{catalogId}}	{tag_catalogueid}

  These two you will need dynamic, but make sure you also get the other correct settings.

• Add the value of point two apex and display the result in another part of the apex

  Hello
  
  I need to make the addition of the two item values using apex.item.text and find the result in another apex.item.text.
  
  For example:
  

  SELECT
  apex_item. Text(1,null) ONE
  apex_item. Text(2,null) TWO
  apex_item. Text(3,null) RESULT
  FROM EMP

  please suggest me
  
  Thank you
  Sudhir

  >
  No it does not add the two values in the column, user key to enter the value, it must add the value of the item and displays the result in a dynamic way. Need a suggestion for using javascript
  >
  This requirement was not not clear in the op.

  See the demo of Denes Kubicek.

  This topic is discussed far too often. Have you tried to Oracle Application Express (APEX) and adapting one of the many examples of LoV cascading to your situation?

  See you soon,.

  PS: Tip:
  Look for the p_item_id and p_attributes of the APEX_ITEM API parameters.
  You can call JS functions for example using p_attribute

  APEX_ITEM.TEXT(...
  p_attributes => 'onchange="doTotal(this);"', /* doTotal being your JS Function */
  ...
  

  Published by: Dominic August 16, 2012 11:52

• How can I add more possible answers to a question of sequence?

  Hello

  I inserted a sequence question slide (survey, unmarked).

  The default value is just two possible answers: a) and b). How can I add more possible answers (also known as [Default Question Answer Style] "?) I have about 6 responses I would get (a, b, c, d, e, f).

  The I tried by pressing return and typing, press the tab and copy and paste b) reply text area field.

  Thank you!

  I just found the answer.

  DUH!

  I didn't know I could do this via the Quiz properties panel.

  THX

• Add selection to the existing mask

  Thissi is maybe somwhere mentioned in the manual, but I could not find.

  You created a layer mask with selected objects, finished edge it - fine

  All selections (ants in market) are now removed from the image

  So you see you must add more stuff to the mask, if you select the new odjects

  But how do you * add them * to the existing mask? Is there a quick way to do a single click?

  Select items and apply whatever you need improvements. Hold down SHIFT and Ctrl (PC) or Cmd (Mac) and click on the thumbnail of the mask. This will add the new selections and selections of original mask together. You can now fill with black or white on the layer mask.