HP LJ 1563 phone problem

1536 HP all-in-One, using a printer connected via a USB, cabling running Win 7 and a fax machine.

I have run the Fax test report and past all active phone line, telephone line current of the correct port test, and tone detected.

The problem - telephone wire coming out of the wall in the 1536 and from 1536 to my phone. By replacing and playing with the son, I determine that the 1536 is not passing any signal through it, incoming or outgoing phone. I can't get a dial tone on the land line. If I don't ignore the 1536, with the phone, no problem.

Well, I don't know what I did or what happened, but it is now fixed.

I download and installed the new firmware (2014) and ran a utility (I don't think that that has nothing), but the problem is now solved.

Tags: HP Printers

Similar Questions

  • BlackBerry Torch 9800 blackBerry smart phones problems

    Sorry guys, but I couldn't find the answers I can.

    In any case, RIM published an update on the so-called lock button on the top phones? I noticed this isn't only this model which is affected. I have heaps of times 'Pocket call' people, texts sent to people and remove apps because the button is so sensative that phone unlocked.

    Also having problems with the appworld keep crashing, this happens every time others.

    Last thing is that I noticed an update for the 9800, but does it include British customers. I checked the phone and he said: I'm updating.

    Thanks in advance

    Do not touch the button is all you need to do to stop unwanted calls and texts.  Unfortunately, it is the easiest thing so much the thing more difficult to do, all at once.

    If accidental pressure on the button there's a problem, I suggest putting your phone in a Holster.  In doing so, the magnets in the case will be aligned with the inner workings of the phone and will stop at your screen, essentially to put your phone to sleep.  (Note that this is applicable only if the case is specially designed for your phone model, i.e. do not try to use a "BOLD" case on a torch.)  It is impossible to access the phone while it is in the case, thus making the accidental presses of the lock button a thing of the past.

    I hope that helps you.

  • Transfer calls to SIP phones problem

    Hello.

    When a user with a Cisco 3905 tries to transfer a call to another IP phone, the call successfully diversion; However, the new beneficiary do not hear anything. If he speaks, the original caller can listen to it, but the recipient cannot.

    Is there anything us missing in our setup in the router of the CMF? All I could do to fix this?

    I attach the run-config and a message from ccsip debugging I extracted by a call that had been transferred.

    Whatever that either would be appreciated. Thank you!.

    Just to give more information on why this solves the problem, some devices/carriers do not manage the call for sendonly to switching sendrcv after a hold event and continue to stay in rcvonly.  This workaround lets the other side think that the call is in sendrcv mode all the time.

  • Windows app and phone problems

    Hi, I'm trying to transfer music from itunes to my nokia lumia 920. I do that all the time with the application of windows for desktop phone but tonight, it has stopped working, it says something about an ATL100. DLL is missing? I don't know what it is. PLEASE HELP ME

    Hi Jordan,.

    Please answer these questions:

    1. You have McAfee installed on your computer?
    2. Were there any windows updates installed prior to this problem?

    Looks like the Windows Phone app installation is corrupted, I suggest that you completely uninstall the application from your desktop. Restart your computer, and then reinstall the Windows Phone application. Please do not forget to download a new installation file.

    We look forward to your response. An update with the status of the issue.

  • BlackBerry Smartphones or phone problem battery problem

    Hi all

    User to BB Bold 9900

    Recently, my battery of phone just dies instantly, never, I loaded my phone when it does not need to be. now he's going red battery (to low to operate the radio) retail in 30 minutes. and I'm not sure if it's the phone that at the origin of the problem, or I just need to buy a new battery. its really annoying because I use my phone a lot and now I can't do what I need when I need because he died. Anyone have the same problem or knows what I can do to solve the problem will be very appreciated.

    Thank you

    I don't think it's battery problem, it could be an application problem cause some kills the battery apps try to close all applications

  • BlackBerry smartphone Blackberry 8220 Flip phone - problems with the calendar

    I just upgraded to a Blackberry Flip and when I inserted my SIM card from my other phone, appointments in the calendar have all lost.  Is it possible I can get these entries?

    OK, is not a problem, download Nokia Pc Suite from this link

    http://Nokia.us/A41423655

  • BlackBerry smartphone Blackberry 8220 Flip phone - problems with downloads

    I ran into two problems with the downloads, and I wonder if anyone has the same problems?

    #1-I downloaded 'facebook' on my handheld and once the download is finished, my phone was cut off and when she came back on once again, facebook has not acknowledged my email/password.  I registered using my blackberry email and password, and that's what I used to try to connect to facebook.  Finally, I deleted my downloads facebook, because I didn't really know what to do... so I thought I would try here.

    #2-after you remove Facebook, I thought I want to download Yahoo! Messenger, as I am familiar with that.  The only thing is, after the download, I could not find the icon to get into Yahoo! Messenger anywhere.  It wasn't in my downloads folder, nor could I find it anywhere else?  I found added to my 'normal' profile on the phone, he was at a loss to know where to find the shortcut?

    I have not read all the forums (my bad - I'm a newbie, but I watch!), and it seems that no one had discussed these (yet) download problems.  My apologies if they were considered above - is there a solution for the latter?

    BCAngel

    Try to uninstall the application and reinstall it from this link

    www.mobile.BlackBerry.com

  • Need serious help. New 8831 phones problems.

    Thank you in advance for helping with this.

    I pulled out recently of new 8831 conference phones to replace my old phones 7937 spider, unfortunately phones know terrible incoming audio. Phones are on a branch site, connected via MPLS and registered at 8.6 CUCM to Headquarters. We have a total of 900 7940 phones that have no problems in any of the different location and band bandwidth/congestion is not a problem. The audio input signal poor that happens to every call. Audio output is fine. 8831 phones are having the same issues at several sites of the branch, but seems more predominant in some. The question has been described as 'audio static, choppy, distorted, with a few breaks.

    I tested with G.729 and G.711 without some luck, after using the web interface to enter stats here, this is what they look like:

    Remote address
    Local address
    10:33:26 departure time has
    Flow in Active status
    Host name
    Sender packages 7180
    Sender 143600 bytes
    The sender Codec G.729
    Reports of the sender sent 0
    Sender report time sent to 00:00:00
    RCVR 2215 of lost packets
    Jitter AVG 20
    RCVR Codec G.729
     
    RCVR sent reports 0
    RCVR report time sent to 00:00:00
    RCVR packages 7178
    RCVR 143560 bytes
    MOS LQK 2.8657
    AVG MOS LQK 2.3054
    Min MOS LQK 2.0000
    Max MOS LQK 3.0295
    MOS LQK Version 0.95
    Cumulative conceal 0.1356 Ratio
    Interval to conceal Ratio 0,0560
    Max conceal 0.2766 Ratio
    Hide the dry 140
    Severely hide dry 120
    Latency 40
    Jitter of Max 160

    Sender, size 20 ms
    The sender of the received reports 0
    Report to sender time received at 00:00:00
    RCVR size 20 ms
    1266 thrown RCVR
    RCVR reports received 0
    RCVR report time to 00:00:00

    As you can see that the MOS is pretty bad, jitter and ignored packets seem to be bad too. Intrasite tests have resulted in better looking for numbers. Initially, I immediately thought "QoS" but all other phones are fine and the problem is with audio INCOMING do not outgoing.

    All comments on this are appreciated.

    Thank you.

    Hello

    As you can see receiver lost packets number is very high, which will cause audio choppy. Looks like you face below default

    https://Tools.Cisco.com/bugsearch/bug/CSCuq03746

    Also can ensure you codec used is g729r8 not g729br8. g729br8 has integrated VAD have so it will drop some packets. Also disable VAD in any voip dial peer by using the command "no vad.

    Kind regards

    Mohit Singh

  • Access to the mobile site of Muse with mobile phone problem

    I've added a site to phone on a destop via Muse CC 2014.2.1.10 site.  When downloaded in Business Catalyst, the browser site works perfectly, but the site of phone cannot be previewed with any mobile device.  "office redirection" is checked in the site properties dialog box.  The phone always displays the site Office.  How can I fix this?

    Hello

    I checked the URL provided by you and I can confirm that his phone Site redirection. I checked this on iPhone and Android device as well.

    Please check this on any other device other than the one you are using. You can also install another browser in the affected device and try again.

    I'm sure it's a specific problem with the unit.

    Concerning

    Vivek

  • Brand new I phone problem

    Hello. I bought new I phone 6 s more than 64 GB of mobile t 11 days ago. Yesterday I was with card and suddenly something happened on the phone, I have never droped on the phone, its new phone and there is no scratechs on the phone. on the screen is out of lines like bar code lines, and its not working do not at all. the phone is passed out. Apple Whats happening of Pentecost products?

    Take it back to T-Mobile if it is within 14 days and they should replace it. After that you can take it to any Apple store and they will replace it. The warranty is 1 year and is administered by Apple.

  • If the iOS 9.3 with older phones problem has been resolved?

    The iOS 9.3 update screwed to the top of my iPhone 5, but good. After downgrading to iOS 9.2.1 and spent several hours chatting with Apple Support and recover my apps, settings and some more time, I'm wary about retry iOS 9.3. My phone invites me to once again 'upgrade' to 9.3.

    Has there been a change?

    Yes, they fixed with an update last night, you should spend.

    ads-affected-by-activation-lock-issue/ http://9to5mac.com/2016/03/28/Apple-re-releases-iOS-9-3-for-Older-iPhones-and-IP

    But backup your iPhone before, just in case it is not resolved.

  • Webcam on Satellite phone problem

    I'm having a problem with my Webcam as I have upgraded to Windows 7.
    People can't hear me well I hear. Any ideas?

    I don't know what application to use but also check settings there. If you use Skype or MSN, you can check the sound settings and test the internal mic.

    By the way: do you use internal MIC or headphone?

  • Adding contact to the phone problem

    Hi all

    I'm trying to add a contact to the list of contacts from the phone, able to copy the following code:

    try
    {
          ContactList contacts = null;
          try {
             contacts = (ContactList) PIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_WRITE);
          } catch (PIMException e) {
             // An error occurred
             return;
          }
          Contact contact = contacts.createContact();
    
         String[] name = new String[ contacts.stringArraySize( Contact.NAME ) ];
         name[Contact.NAME_GIVEN] = "Kate";
         name[Contact.NAME_FAMILY] = "Turner";
         contact.addStringArray(Contact.NAME, Contact.ATTR_NONE, name);
    
         AddressBookArguments entry = new AddressBookArguments(AddressBookArguments.ARG_COMPOSE, contact);
    
         Invoke.invokeApplication(Invoke.APP_TYPE_ADDRESSBOOK, entry);
    
    }
    catch (Exception e)
    {
        System.out.println("erreur ms avt ps disp addContactToRep " + e.getMessage());
        e.printStackTrace();
    }
    

    but I get an exception while debugging, on the line "entry AddressBookArguments = new AddressBookArguments (AddressBookArguments.ARG_COMPOSE, contact);

    The error is: invalid argument

    I am using the code introduced by the api, but it seems that what I wrote is false...

    Could you please help me?

    Thank you.

    Hello

    You can try to climb the PIm.getInstance () to BlackBerryContactList instead of the contact list.

    You may need to change the AddressBookArguments.ARG_COMPOSE of AddressBookArguments. ARG_NEW.

    Hope that will help you.

  • Save text pictures on the phone problem

    I have a photo sent by SMS that I want to record on my phone, so I can send by e-mail. When I opened the peak on the text message, I hold my finger on the photo, but the flash menus upwards and disappear instantly. I tried power off and restart the phone... same thing.

    Any ideas?

    Thank you.

    Long press corps text on the attachment, do not open the pic.  Who give a shot.

  • VPN phone problem

    Hello

    I'm trying to get the VPN phones in collaboration with the 4 ASA 8.3 (1)

    The SSL VPN rises and the ASA back up the DHCP request on my DHCP server

    However, in the trace DHCP, I see that the ASA does not ask the option 150 tftp server address

    Thus, the DHCP server does not send the 150 option and the phone does not receive the address of the TFTP server.

    I have generated TACS for this, but I was wondering if anyone has had this job.

    How the ASA to ask the address option 150 in the DHCP Discover packet sent asa to the DHCP server

    Maybe not. I saw this new bug.

    CSCso44665 DHCP options (such as tftp) are not pushed to VPN clients  

Maybe you are looking for