Dynamically create a point

Similar Questions

• When dynamically created variables are emptied in the sequential process template?

  I have a sequence TestStand 2014 in which I dynamically create and fill many FileGlobal variables in the installation section of my main sequence.  I have it using the TestStand API to read the data in an Excel file (the data consists mainly of thresholds, limits, etc.).  The methodology itself works flawlessy.

  However, there are differences in behavior when using entry points both execution of the sequential process model.  When you use the entry point of execution 'Single Pass', he has no problem in test a DUT after another.  However, when you use the entry point for execution "Test DUT", I encounter the following error after completing of DUT1 and DUT2 testing:

  An error occurred the call 'InsertSubProperty' in 'PropertyObject' of 'NI TestStand 2014 API.

  The name of the element "VariableName" is not valid because it is already in use.

  I interpret this error message means that the variable I am trying to dynamically create the DUT2 track is already present race of DUT1.  I have a few questions about this:

  1. at what point in the sequential process template are dynamically created variables flushed, such as run a further by using 'Single Pass' starts with a clean slate?

  2. is there a reminder that I can substitute such as variables to rinse after each HAD run, allowing me to dynamically create variables on each HAD, during execution using "Test UUT?

  3. better yet, is there a counter of TestStand I can query to determine if I already ran DUT1 when using "Test DUT", such as DUT2 uses the variables that were created dynamically on trail of DUT1?

  Or you can simply use the PropertyExists function as a precondition.

  PropertyExists ("Locals.Foo")

• How to dynamically create action item?

  Hi, I want to dynamically create point.

  Before I want to create using qml, but does not seem possible

  http://supportforums.BlackBerry.com/T5/Cascades-development/how-to-create-action-item-of-page-dynami...

  So maybe better to use C++ to create dynamically,

  I'm already try but are still not

  So I have a custom control qml (a Navigation pane)

  name List.qml

  the structure is like this:

  NavigationPane {}

  {Page}

  objectName: myPage

  {Of container

  ....

  }

  }

  }

  How to add action item to this .qml?

  I'm already try that, but failed

  C++ :

  Engine QDeclarativeEngine;

  QDeclarativeComponent component(&engine,QUrl::fromLocalFile("List.qml"));)

  QObject * object = component.create ();

  Page * myPage = object->findChild ("Edit");  Maybe, on that note, I'm wrong implemented? -> not found?

  ActionItem * action1 = ActionItem::create () .title ("first action");

  my page-> addAction (action1, ActionBarPlacement:nBar);

  Remove the object;

  How to create this dynamic Action item?

  Help, please

  Thank you

  Hello

  QML, the object name must be included between "" marks.

  Name of the object of your Page will be:

  objectName: "myPage"
  

  You can reach any CPP QML object like this:

  This excerpt comes from YourProjectName.cpp

  // create scene document from main.qml asset
  // set parent to created document to ensure it exists for the whole
  // application lifetime
  
  QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
      // set created root object as a scene
      app->setScene(root);
  
  //and here comes the findChild method
  Page* qmlPage = root->findChild("myPage");
  

  After this, you can create any object on the side of C++ QML, as your own code:

  ActionItem* action1 = ActionItem::create().title("First action");
  myPage->addAction(action1, ActionBarPlacement:nBar);
  

  Don't have no need to create a QObejct, or declarative stuff.

• address dynamically created symbols

  I don't know what is the best way to deal with a specific symbol dynamically created because I don't see in the dashboard API in any way to get the name of the symbol instance. The method . getSymbol() would be the best way to do it, but it takes the name of "instance" symbol and I don't know which one it is. When I use . createChildSymbol() I just pass the name of 'type' symbol and the name of the element parent to put inside but nothing about the symbol instance name that is created. The method . getChildSymbols() doesn't help much because it gets "all" direct children instances are, and I have more of an and of different types.

  I need to get one specific symbol among others that I created dinamcally, so how do I do it better?

  I think on the use of . getChildSymbols() and loop through them all, get the DOM of each symbol with . getSymbolElement(), then use the "class" attribute to at least identify the different types of symbols children recovered. I now have a subset of the children-brothers (symbols of the same type class =) and I can walk through them. At this point, my only hope to distiguish them is the setting of index-z I spent when I created the symbols using the . createChildSymbol().

  Another option would be to 'save' the manager returned to each symbol created with . createChildSymbol() in an object like this {symbol: handler, name: 'no name', created: ' date/time',...} and save them in an array of objects.

  All the best ideas?

  I found something in http://www.edgedocks.com/edgecommons#anchor_edgecommons_21. This guy did a getSymbolName function, which is exactly what we need to solve this problem.

• Is it possible to use a statically defined appearance streams in a dynamically created annotation?

  Hello

  I want to create a document with cascade "popups".  Not the popup only integrated text, but an annotation that contains a stream of appearance that sets the text and images.  I am currently using widget annotations based on a push button field.

  Each page of my document has many citations referring to other pages in the document.  When a user hovers over the quote, I want a "popup" appear containing a representation of the destination.  However, as the destination itself will be quotes, I also want the "popup" to contain citations that the user can fly over, triggering another popup, etc.  In this way, a user can navigate the entire document without leaving the page, or by clicking the mouse.

  Of course, with even a small number of citations per page, pre calculation and statically define all these widgets causes a combinatorial explosion, making it slow and very large document.

  Instead, I want to statically define workflow appearance once per document, and then dynamically create annotations and affect the seemingly appropriate flow using JS when the user navigates.

  So far, I created an access point named in the dictionary of names, but I was not able to use it to dynamically set a dynamically created the appearance of a widget annotation workflow.

  Also, I called Doc.getIcon (), passing the AP named, which returns an Icon object.  However, after field.buttonSetIcon () and passing the AP named, the button does not appear the icon.

  Is it possible to use a statically defined appearance streams in a dynamically created annotation?

  Thank you

  Dave

  Using getIcon/buttonSetIcon must work, but you must make sure that the button is set up that it be set in page is not 'Label Only.

  Also, it is best to store the icons of hidden buttons and recover them with buttonGetIcon due to a bug that causes the icons at the level of the document get wiped out when performing a save as operation file.

• How to dynamically create variables of StationGlobals who are LabVIEWIOControl

  I'm looking for a way to dynamically create variables StationGlobals LabVIEWIOControl.  I know not how to create variables through "PropertyObject/SetValXXX", however I have some difficualty create variables that are custom data types.

  Thank you

  Bryon

  Bryon,

  You can use an expression as follows:

  StationGlobals.NewSubProperty("MyVariable",PropValType_NamedType,False,"LabVIEWIOControl",0)

  I hope this helps!

• dynamically create and destroy the custom menu item

  I have a standard TestStand platform that I use on multiple systems.  On some systems, I have a few sequences of calibration and I would like to have the Update menu to have the RunSequence of these sequences of calibration.  I know how to manually create these menu items, but they are no longer valid for some sequence files.  I would use the sequence SequenceFileLoad to dynamically create menu items and the SequenceFileUnload to destroy these menu items.

  I've played around with the API, but cannot determine the correct path to get to the create and destroy the custom menu items.  Does anyone know how this can be done?

  Thank you

  Matthew

  Yes, see the online help for the members of the following APIs:

  Engine.GetEditTimeToolMenuItems

  EditTimeMenuItems

  EditTimeMenuItem

  Basically, you get a collection of tool using Engine.GetEditTimeToolMenuItems () menu items and then call EditTimeMenuItems.Insert () or EditTimeMenuItems.Remove (). If you insert a you get returns an EditTimeMenuItem object on which you can change the settings.

  In addition, since it has an expression to hide items in menu tool, you need not necessarily to destroy, you can hide them instead.

  Hope this helps,

  -Doug

• Time of design and of the dynamically created controls

  I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

  I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

  In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

  Hi JC,.

  I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

  I hope this helps, JC.  Have a great day!

• I am trying system restore and it says I have no restore points and will not let me create restore points

  help I am trying system restore and it says I have no restore points and will not let me create restore points
  * original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.

  Hello

  1. what exactly happens when you try to create a system restore point?

  2. you receive an error message when you create system restore point?

  3. what operating system is installed on the computer?

  In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.

  Method 1:

  Step 1:

  Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.

  To check the service

  (a) click Start

  (b) in the start search box type Services

  (c) click on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Shadow copy volume started Automatic\Manual

  Step 2:

  Also check the dependency services that are required for the System Restore Service run.

  To verify that double-click the service, and click the Dependencies tab.

  This service must be started before the restore point is created automatically or manually.

   

  Method 2:

  Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.

  Follow the articles given below to change the settings for the firewall and security software settings

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note:

  If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.

   

• help please error code 80070539 windows 7 updates do not download, stops after trying to create restore, point

  Windows 7 not loading no updates fail after trying to create restore point

  Hello

  Previous similar questions have suggested that this may be related to Google Desktop. You have this installed?

  Otherwise, unless you are certain that the update fails after you have created a restore point, have you tried to disable restoring the system temporarily, then by reactivating it after a reboot?

  http://www.nirmaltv.com/2009/03/14/how-to-enable-or-disable-System-Restore-in-Windows-7/

  Then try to apply the updates.

• Not getting not automatically created restore points

  Original title - help with Restore Points

  I recently changed the size of my drives C and D using a utility partition.

  He stopped the automatic creation of Restore Points. I noticed this because the restore disk cleanup deleting data/shadow copies running did not clearly get out any space on my hard drive. I run Disk Cleanup about every 10 days.
  I tried to re - turn on this; but I'm not able to do. Here's what I did:
  Under Task Scheduler, I have a set trigger in place to create a point of restoring daily at 14:00. My computer is sometimes off in the morning.
  The State of this trigger is activated. This is used to create regular restore points.
  I disabled the trigger to create a restore at startup a point a couple of years. My system has been the creation of restore points every day with the other Tirgger at 14:00 in Task Scheduler.
  Question No. 1: Would it be useful to delete and recreate the trigger for 14:00?
  Question 2: I went into control panel – system and Maintenance – System – the System Protection window and I am able to manually create a restore point.
  I can see my drives C and D on the list. Maybe I think too much about things and read things correctly; but I feel like it's better to ask this question:
  * Should I put a check mark next to my D drive or my C drive?
  I ask this question because the title says in this little window of the System Protection: "create restore automatically on some points:
  So, does that mean that only check box for drive C indicates a place where the restore point will be created physically ("on drive C"), or it means to a restore point to data on the C drive will be created? Is this clear?
  Right now I checked C drive and D drive and not on the list. I'm assuming he's asking me which drive I want backed up.
  (I don't know where the backup restore points are saved/located to go look for them.)
  I see that the last restore point was when I did it manually. The task scheduled for 14:00 does not appear on the list in this little window. However, when I check the history of Task Scheduler, it shows that the task has been completed.
  Question 3: Is something wrong with this list? I also check to see if the restore point is created at 14:00 from the task history shows that this has been done?
  I would appreciate help with this. I put a reminder on my calendar to create restore points manually. But something does not work with my system; and I want to fix it.
  Ken

  Restore points are made. Yesterday, after posting the original message/questions, I changed the schedule of the trigger to make a restore point. Maybe something jogging in the system in place. (Not exactly a technical term, I know.)

  Today, I checked the disk cleanup and had much less free space of a few days. I ran clean it point restoration/cliché and cleared space. Then I checked the control panel – system and Maintenance – System – the System Protection window and saw that the restore point the most recent was created today.
  Then...
  Question 1: Maybe change the relaxation time makes a difference.
  Question 2: Place a check mark next to the C drive, which is the drive that you want supported during the restoration.
  Question 3: Everything is fine with this list.

• Impossible to create a point of restoration with the error message "task Mgr is damaged or has been tampered with. 0 x 80041321 ".

  Original title: Create Restore Point will create new not a point of restoration after upgrade to Vista Ultimate in Basic

  I get the error message. "Mgr. task is damaged or has been tampered with. 0 x 80041321."when I try to create a new restore point manually. But it appears automatically when I do a backup of files and when I planned for it, for in the system settings. How can I fix this problem

  Hello
   
   
  Thanks for posting your question in the Microsoft Community.
   
   
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
   
  
  Please follow the methods and mark the question below:
   
   
  Method 1:
   
   
  I suggest you try the steps mentioned below.

  Steps to re-create the Task Scheduler:

   
  a. Click Start; in the start search type regedit.exe and press ENTER.

  If you receive a consent prompt, click Yes.

  b. navigate to the following location.

  HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.

  c. save the changes and then close the registry editor.

  Now check if the Task Scheduler works.
   
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  
   
   
  Method 2:
   
   
  Step 1:
   
   
  I first suggest you to check if the Volume Shadow Copy service is running.

  a. Click Start, type Services in start search. When the page is open, look for Volume Shadow Copy service.

  b. right click on the Volume Shadow Copy service (VSS) and check whether it is started.

  c. If it is stopped, select start or restart.

  Check if you can try to create restore points after starting the service

   
  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Step 2:

   
  If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.
   
   
  Disable the antivirus software:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
   
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 3:
   
   
   
  You can also try to remove the job from the location:

  C:\Windows\System32\Tasks

   
   
  How to find which task is damaged or altered.

  a. Click Start; type cmd in the start search. List programs, right-click on cmd and run as administrator.
  b. now run the following command

  schtasks/query | findstr /i

  Search

  ERROR: The task image is corrupt or has been tampered with.
  ERROR: Task cannot be loaded: the task name

  Find the name of the task, try deleting the task name, and then try to recreate.

  See the link below that solves your problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

  
  a. Click Start, type Task Scheduler in the start search box and then click on Task Scheduler in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. the component shares of the Scheduler dialog box, click on create a task and check.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• create restore point

  On the two latest updates of definitions soundcards Defender, the usual announcement 'create restore point' is missing.   Update history confirms successful downloads, but I wonder if something essential has been omitted.

  JW

  To store restore points, you need at least 300 megabytes (MB) of free space on each hard disk with the system on Protection.

  System Restore can use up to 15 percent of the space on each disk.

  As the amount of space fills up with restore points, System Restore deletes older restore points to make room for the new.

  System Restore: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx>
  UTC/GMT is 13:46 19 October 2012

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.

• System Restore cannot create restore, point because the "shadow copy provider had an unexpected error." What can I do?

  Have a Dell Inspiron 1545 with Vista.  System Restore cannot create restore, point because the "shadow copy provider had an unexpected error."   What can I do?

  Hi JamesParwulski,

  Method 1
  I suggest you to scan SFC.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
  http://support.Microsoft.com/kb/929833

  Method 2
  I suggest you perform a checkdisk.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors