Time of design and of the dynamically created controls

Similar Questions

• What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  Your library system can be on an external drive, if the drive is Mac OS extended (journaled) format and mounted on-site.

  But you must be careful, your external drive is always connected and available before the Photos and to import new photos.

  If Photos opens a different library, news, you can switch to the library on your external drive by double clicking on an external library. You can have several libraries, no problem.

  But pictures don't have any tools to merge libraries. You can switch between libraries, then open them alternately.  To merge two libraries export the photos of the smallest library and import the photos exported in the largest library.

  Or use third-party "PowerPhotos" to move photos between libraries.  But the merger is not supported in the free trial version. You must purchase the full version. You can download it here: Fat Cat Software

• I fell for the "eventvwr" scam and gave the appellant to control remotely from my computer.

  I fell for the "eventvwr" scam and gave the appellant to control remotely from my computer.  When I insisted on getting a phone on their part number, I shut down the computer, waited a bit and restarted again.  Everything seems normal, but I'm worried.  I had to give them a "id" so that they could take control remotely.  I have to worry about remote access to my computer now?

  I fell for the "eventvwr" scam and gave the appellant to control remotely from my computer.  When I insisted on getting a phone on their part number, I shut down the computer, waited a bit and restarted again.  Everything seems normal, but I'm worried.  I had to give them a "id" so that they could take control remotely.  I have to worry about remote access to my computer now?

  Remove all device has been installed to allow remote access.

  You need to change passwords on accounts and examine your computer and all data within being compromised.

  Your line of safer driving is to reformat/reinstall your operating system.

  You can also check the following links for more information:

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.mypchealth.co.UK/GuideScam.php

  http://ask-Leo.com/i_got_a_call_from_microsoft_and_allowed_them_access_to_my_computer_what_do_i_do_now.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/i-fell-for-the-eventvwr-phone-scam/8e79cd60-0a09-4ED6-85b0-056230878815?page=1

  Good luck...

• Changing the property of all the dynamically created MCs at the same time

  I have a list of dynamically created MCs.  I have this function, which works very well:

  function onLoaded(e:Event):void {
  
       xml = new XML(e.target.data);
       var il:XMLList = xml.channel.item;
       var listItems:Array = new Array();
       for (var i:uint=0; i<il.length(); i++) {
            listItems[i] = new list_item_mc();
            listItems[i].x=0;
            listItems[i].y=i*60;
            listItems[i].list_txt.text = il.description.text()[i];
            listItems[i].addEventListener(MouseEvent.CLICK, listItemClick);
            addChild(listItems[i]);
       }
       
  }
  
  function listItemClick(e:MouseEvent):void {
       e.currentTarget.list_txt.setTextFormat(highlightText);
  }
  

  However, I would like to have this setTextFormat command be run on the list_txt text box in ALL dynamically created MC any ONE of them is clicked on.

  
  How to achieve this?  The number of dynamically created clips may change at any time, is not a defined number.

  Thank you!

  If you declare the array listItems outside the functions, you can access in your event handler function so that you can loop through it similar to the way you already do in the onLoaded function.

• Time of response and visits the URL table

  Hello

  We want to capture the URL request hits and their average response time Foglight.  I also want to know how an alert if the successes are above the threshold.

  Is it possible to do using Foglight? If Yes please let me know the steps to do it?

  Thank you

  Sure.

  The entire process is described in the documentation.

  Basically, you will need to download the support link cartridge

  

  Download the Foglight Management Server web console > administration > cartridges > inventory

  

  Deploy on the fglam from which you want to run the agent (and requests).

  

  Create an agent.

  

  Configure the basic properties (it's optional, I saw people wearing at least the location alias they wanted a good logical name) and activation of the agent.

  

  You can repeat this step and create several different fglams agents that run in different places (make sure that you give them good logical names in the aliases).

  Then go to the webmonitor > directors home and click on manage them transactions

  

  Click the Add button to add transactions, you can specify the names of transaction, the webmonitor to only get the page header or clarify some should define the content. Notice the bottom of the pop up where you choose where transactions are played and notice the options button advanced option

  

  The advanced settings allows you to change the default thresholds for response time so that specify proxy (note that if you use a proxy, you will need set the credentials).

  

  The result will be visible in the performance Explorer.

  

  Note You can also press the button "Explore" to see the forest-downs

  I hope this helps.

  Golan

• Redirect button AND perform the dynamic action

  Hello

  I use Oracle 11 g and Apex 4.2.2

  It could be a matter of beginners (but that's what I'm ;-)) but I'll ask anyway.

  I created a button and can "redirect to the Page in this application" in the section "Action when the button clicked" or select "defined by the dynamic Action."

  Is there a way to select "Redirect."... "AND run the SQL Code?

  This is exactly the situation that I was considering. You start at the apex (which means don't not offensively or anything like that) and so the concept of session state can still be fresh for you. Telling me where you're just complicates things for yourself.

  Why do you, or makes you think, that you need to run plsql in dynamic action first and then redirect the page?

  Running code plsql already involves tracking session state and would require the value of the required items on the server. Running WHAT PLSQL is on the side server, if a call should be made. Given that you want to redirect afterwards, the call should happen synchronously, IE make the browser wait the result in order to continue to the next step. A redirect will just tell the server to send the new page to you.

  So why would not just use a send page? A page sent will submit all values of item on the server and thus session state. You can use the values of calculation and validation processes and never worry about having properly put it. You can filter out inappropriate process etc. According to the values of query (for example submit) so no problem there. Finally, a branch should redirect you to the target page. Remember, a branch is a part too and is essentially a redirect server-side. Find yourself on your new page without problem really and just send 1 page (send page, get another back essentially).

  That said, I simply don't consider a dynamic action. It is useless to laregely here and creates more problems than is useful to review more.

  What you have now is to redirect the client to another page, but in the process, you have lost everything from the original page. No values are stored in the session to all State: no save manual to submit State or session page. Add the element to the redirect link doesn't work either, as the link is built during rendering and is not dynamic (so no ' regenerated' link when you click it).

  Again, I advise you to:

  -put the button to send the page

  -create a process after you submit and run your plsql code

  -create a branch to a point after the process and set it to redirect to the target page

  or

  -put the button to send the page

  -create a branch set up to redirect to the target page

  -create a process on the target page and run your plsql code (but be aware that it may have to be executed conditionally)

  There are several traps on session state, so when you feel better grasp it. Page submits are not all that bad.

• iOS 10 times to start and stop the music messed up

  I'm running a SE 64 GB iPhone with iOS 10. Many songs from my iTunes library has some moments of power, but after update, they are all mixed. Songs don't start or stop when they're supposed to, or they're going to start and stop at a random time, which is annoying. The same problem was in the beta, causing me to backup on iOS 9. I assumed that this bug would be fixed in the final version. All the solutions in addition to remove and re - download my library?

  Hello Carnage1215,

  Thank you for reaching out to the Community Support from Apple. I understand your music has had some problems and I want to help him. By the sounds of things that your songs start may be delayed or in the middle of the piece, is that correct?

  Before you make too much trouble shooting, it's a good idea to make a backup of your iPhone If you don't have it already. If you do not know how to save your phone from this article will guide you in the process: the backup of your iPhone, iPad and iPod touch

  Once you have made a backup, I would recommend to reset all the settings on your iPhone. This will ensure that all old data of a version of iOS parameter are removed and reset default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & paper painted and privacy, then you may need to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If you always use the same behavior after you restart your phone, please inform the community. We are all here to help.
  Best regards.

• Select and validate the newly created lines (data stop) in ADF

  Hi all
  
  Here's the problem of mine: I want to validate and save the data in the SERIAL_EXCHANGE table, include NEW_SERIAL_NO and OLD_SERIAL_NO. The OLD_SERIAL_NO is not allowed to save in 2 files, I used the getCurrentRow method to select the new created line and validate it. This method works when I do not change the selected line and create other rows consecutively. But when I do, the method does not work well.
  
  So I want to find a way to select newly created lines and validate their value before they are committed to the database. Please help if you have an idea how to solve.
  
  Thank you
  VnMa

  This in the right place - DB

  unique index on the old serial number
  foreign key to validate the existence of the old serial number of the other table

  In the ADF, you would use a unique key for the uniqueness and association EO to validate the existence of the other table.

• How to calculate the dynamically created cells?

  Hello

  Please can anyone provide us with a simple code to calculate the cells created dynamically using Add button line?

  Thanks anyway

  Header
  1					Quantity [1]
  2					Quantity [2]
  Footer					Total

  Hello

  Write this script on the Calculate the value TotalAmount field event (using FormCalc):

  $.rawValue = Sum(parentRowName[*].Amount.rawValue);
  

  Hope this will help you.

  Thank you.

  -

  Afonso

• KB2656353 & KB265637 try several time to install and get the error code 643

  Original title: several attempts but will not install updates

  KB2656353 & KB2656370 security updates will not be installed. I have made several attempts to install & they will not. I ran the Windows Fix It to fix any problem & he says that it correct. But again, try to install & it does NOT install these two.  It also has a Code 643 showing thereon.

  Try to download and install them manually.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29364

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28575

  To solve the problem check this article

  http://support.Microsoft.com/kb/976982/en-us

  or

  Try to repair the .NET Framework.

  Click on Start > control Panle > programs and features find offshore Microsoft .NET , click Uninstall/change , and fix it. Then try to install the updates.

  If again get the error follow the steps below

  1 - Download .NET Framework cleanup tool http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip and unzip it.

  2. After you have retrieved double click it to open it

  3. in product cleaning select all versions , and then clickclean now

  4 - restart your PC after cleaning ends.

  5. download and install the suite

  Microsoft .NET Framework 3.5 Service Pack 1

  Microsoft .NET Framework 1.1 Service Pack 1

  Microsoft .NET Framework Version 1.1 redistributable package

  Restart your PC and run Windows Update.

  Hope this helps,

• Save and read the value of control using xml

  I need to read and update the controls with the values they have the previous time the vi has been run. Joined a vi that I come up with. I can record control values; When I apply the section which should read and update control values, I get this error "the XML tag describing the type of data does not match the wired type". Do we know why? Attachment: test vi and xml control file.

  As far I can tell it seems that you have found a bug. The XML Unflatten handles not properly cluster in a chain, and a variant of something. The Get All method returns an array of clusters, with each group being a string and a Variant.

  If you follow these steps:

  

  no error is generated.

  But, if you do this:

  

  you get an error.

  Looks like a bug to me.

• What are the best practices for creating only time data types, and not the Date

  Hi gurus,

  We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.

  I would strongly appreciate ideas and suggestions.

  Kind regards
  Ranjan

  Hello

  How do you intend to use the time?

  If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.

  Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average?   If so, the NUMBER would be preferable.

  You are just going to display it?  In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.

  As Blushadow said, it depends.

• What is the default user name and password of the dynamically created edge NSX gateway?

  Hello

  I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?

  Thank you

  Pankaj

  I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.

• Read the dynamically created objects

  Hello

  I get my feet wet with development of Cascades, and I was hoping someone here could answer some questions I had.

  I am defining a container that contains a drop-down list and a zone of textfield and I need to repeat this containing three more times. I thought by using the ControlDelegate class to create three instances without writing the code three times. However, I don't know how I'd read the value of each instance of the drop-down list and the ControlDelegate textfield.

  Any Suggestions?

  If you instantiate the like this:

  Container {
      property variant control1
      property variant control2
      property variant control3
  
      id: rootContainer
      Label  {
          text: "Example Component Definition"
      }
      Button  {
          text: "Click to create dynamic component"
          onClicked :  {
              // Create the component and add it to the Container
              control1 = compDef.createObject();
              rootContainer.add(control1);
              control2 = compDef.createObject();
              rootContainer.add(control2);
              control3 = compDef.createObject();
              rootContainer.add(control3);
          }
      }
      attachedObjects: [
          ComponentDefinition {
              id: compDef
              textfield { id: text }
          }
      ]
  }
  

  Then components are accessible as control1.text, control2.text etc.

  If the number of objects is constant, then ControlDelegate might be more convenient.

  For ListView, you can use ArrayDataModel or GroupDataModel (for more complex models with sorting) and fill it with any type of data. Any kind of items can be added, it's just a picture of QVariantMaps. It is not necessarily Xml or SQL wrapper, but specialized models also exist for this. It is even possible to create a subclass of DataModel custom c++ to expose existing data objects.

• Now 8.0 for Mac Firefox hangs every time it opens, and replace the soft, disabling report, restart the Mac (latest system in use) do not fix the problem.

  I was checking a site of the French hotel, 8.0 Firefox crashed and now cannot be restarted without crashing, even after replacing the application with a new 8.0 file.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  See:

  • http://KB.mozillazine.org/Firefox_crashes
  • https://support.Mozilla.com/kb/Firefox+crashes

  If you have submitted incident Breakpad reports then validate the ID of one or more reports of incidents Breakpad (bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx). You can find the ID of the crash on the topic submitted reports: page crashes. You can open the topic: blocking the page through the address bar, you open a Web site.

  See:

  • http://KB.mozillazine.org/Breakpad (Mozilla Crash Reporter)
  • https://support.Mozilla.com/kb/Mozilla+Crash+Reporter
  • https://developer.Mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report