E 8610 HP MFP: install new printer HP 8610 to replace the existing HP J6450
I am about to install a new printer HP 8610 to replace my current HP J6450 printer. Should I uninstall the existing drivers and the HP Solution Center software? (That was an unpleasant task in the past). Currently the W10.
Hello
The new printer should use the HP printer Assistant software.
Kind regards.
Tags: HP Printers
Similar Questions
-
HP Envy 5540: problem installing new printer
I just plugged the new printer and turned on. The blinksslowly wireless light and the printer is just below my modum.
Go into devices and printers t appear not at all.
Help
And did you follow the instructions to connect your printer to your router? You load the software and follow the installation instructions?
-
lack of alignment 8500 after installing new print heads
I replaced the print heads in the 8500 wireless all-in-one and get alignment failed. printer will print documents sent to it, but follows with a print alignment page. Displays the alert of misalignment.
always print test page of alignment after each document printed.
Note: replace the print heads about two years without any problem. Patrick
I appreciate the answer @patrickoj
When the alignment fails, it will continue to retry the alignment every time that you print - it's frustrating, but it's normal.
If you have tried all the steps of a "alignment failed" Error Message appears on the printer control panel, I would like to contact HP Support to see about replacing the printhead (s) that do not work properly. Check the model number and the form to receive a file number for faster assistance.
You can review the limited warranty for print HP ink and print heads replaceable by the customer of consumables HP inkjet cartridges, whether your print heads are in warranty.
Thank you
-
I installed FF on my new computer, Windows 7 Toshiba, I get the message Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. It is NOT open I have only one computer.
I had a computer scientist to try everything, and we cannot on it to open it.Search the firefox process firefox.exe and kill him with for example the Task Manager. It is also worth watching for the plugincontainer.exe.
The problem and the solutions are explained in the articles:
-
How can I remove the printhead on serial printer F4400 clean and replace the print head?
I have an E error on the printer and when I replaced the black ink, that he stayed like this, I see the print head and I think it should be removed, because it shows the black ink.
No the solution did not work, I will buy a new printer soon. Thanks for the help, I thought I understand there is not a print head to remove.
-
"I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.
Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673
Try this first and post back to tell how you got.
-
I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying
See "hang out":
-
After worm 24, find bar can not migrate to new tab without having to replace the current one. If ctrl + f in a new tab I mast manually repeat again to search, or ctrl + f.
Try this extension: https://addons.mozilla.org/en-US/firefox/addon/findbar-tweak/ works with Firefox 45.0 and later versions
-
I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!
Try asking in the forum Premiere Pro seems to be an Adobe first Pro Lab
-
Office jet Pro 6975: install new printer
Bought the new printer to replace the 7 year, HP Photosmart printer. Should I delete all the files from HP on my mac and start cleaning up when installing it or simply delete the printer.
Hello
You can uninstall the old HP printer software on your mac before installing the new driver software for your new printer.
Please see this link for more information on how to uninstall the printer HP on Mac software
http://support.HP.com/us-en/document/c02440673
I hope this helps!
"Although I am an employee of HP, I speak for me and not on behalf of HP' 'Say" thank you"by clicking on the star of congratulations in the post helped you. '" -Please indicate the position that solved your problem as "acceptable Solution"
-
OfficeJet 4630: Install new printer - ink cartridge problem
I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new cartridge would be acceptable?
Follow-up of your steps. Cartridges still a problem in the printer display. Took printer at Staples. The store manager confirmed my status then loaded 2 new cartridges (free) the sales basket - printer worked. Staples deals custormers good!
-
Photosmart 210 a: won't print black after installing new print heads
Hello, I bought and installed a new printhead. It will print color but not black. They were all new cartridges when the print head went down. the tools to say all the cartridges are full, please help.
Hey there @LMACE!
Thanks for posting on the HP Forums!
I see that your printer is not printing black once the print head had been replaced. I would be more then happy to provide you with some suggestions that can make things work again. The first thing I would suggest is to remove the cartridges and printheads the printer and manually clean the electrical contacts on the printhead and the printer. It is possible ink sprayed on the copper contacts causing a bad connection, when the new print head has been installed. If the printhead is not getting a good connection, you may notice messages on the printer error and poor print quality.
To clean manually the printhead in the B210a Photosmart click here: manually clean the print head
If please, after back and let me know how it goes!
-
Install new printer and remove old printer
I'm trying to remove and install a printer. Someone can help me. I have a hp photosmart C7280 printer I want to install on pc.
Follow-up to the procedure didn't work.
lisawhittle,
Run first remove print jobs to remove all blocked the queue print jobs.
Unplug the printer.
Uninstall the printer, start, Control Panel, add/remove programs, your printer, uninstall.
Restart your computer.
Then if you try to install the printer, you must install the printer before connecting the usb cable to the computer.
Don't forget the programs anti-virus and firewall will block communications.
Rick
-
Via the network configuration menu, I put the IP address of 'Manual' and entry
IP address of the printer
subnet mask
the gateway IP address.
At the end of the said printer TCP/IP settings are updated.
Print a summary of network page shows no data.
I swapped the ethernet cable.
Ideas?
(Thanks in advance)
Mysteriously, this was probably necessary for the connections to stay together long enough to get friendly.
I have reset some things on the ATT, plugged and unplugged modem ethernet cable, obtained on other issues, I have to solve... and, Lo and behold, the LCD screen on the front of the printer has started to display the IP address.
And, of course, the printer works now!
-
My new printer does not appear in the list of printers
I bought a new HP Officejet Pro 8715 and I had great difficulty it is set up to use. It seems the method to print and scan drivers has changed dramatically since my last new printer. HP supplies over a CD with the software, but rather is supposed to happen automatically via the Apple software when I plug in the printer. This was not the case.
At this point, I have the printer (4 hours) work, but I can't get the software "Readiris' of scanning to work. Yet once again, I am told that if I just plug the printer via the USB port and turn it on, then the OS knows what software to load. In reality, he doesn't "know" or "do" something.
I tried to configure manually by going to System Preferences > Print & Scan and then by clicking on the sign more to add the printer software. This will show you a huge list of printers, but the list ends with "Officejet Pro 8660." My printer is a 8715, so there is nothing for my printer. Installation of the software for 8660 did not help to solve the problem.
Two questions:
1. why list of Apple printers does not have my printer?
2. How can I get the Apple software to see the drivers for my printer?
Thanks in advance for any help or advice!
1. If the printer is a new model and HP did not provide Apple with the driver software, Apple would not list.
2. go to the HP site to find and download the driver software.
http://www.printerdriverforwindows.com/HP-OfficeJet-Pro-8660-driver-download
Maybe you are looking for
-
AT100 battery is only 99%
HelloI got a new Toshiba AT100 last week. I left load for 18 hours before first use, that used for a few days and when the battery was at 5%, I leave it will load from one day to the next, off. But the battery only reached 99%, even though it says "f
-
Can I change the application title bar color?
With a number of open applications and windows a standard color grey silver it can be quite difficult to quickly locate a title bar to move a window. I don't see any option in system preferences to change the color of title bar. Can it be done?
-
Molex connectors in HP Pavilion a6700y desktop
I know that these are power connections and are numbered. Does anyone know what each is designed for. I add a USB 3.0, I'm going to need a SATA cable.
-
Why carnt I defragment reserve hd system
why I can't defragment reserve hd system
-
80070436 error code when I try to download an update!
Help! Try to download an update on Windows Vista titled 'Ralink - network - Linksys Wireless-G USB Network Adapter' but get the error code 80070436 when I do. And again I say HELP!