E2416H fall more into the monitor arm (VESA)

Similar Questions

• Firefox loads, icon on the bar of tasks but when you click the slide of graphics off to the right, but does not fill the screen & when you right-click again, falls back into the icon

  Firefox, Thunderbird and Quicken were active when I loadad & ran a slot machine game. When I left the game & click on icon to return to Firefox full screen, I could see the flash of the image to the right of my screen and disappear. When I clicked on the icon in the taskbar, the reverse happened - the image flashed from the right down to the icon. When I hover the mouse over the icon, the open screens appear with the red X to close, but the same thing happens when I click on this box. Two other programs that have been opened, while the game was active work correctly, only Firefox has been affected. I can't open the program to access one of the menu items that I can't get the image of the screen on the monitor. I did uninstall and reinstall a freshly downloaded copy, I had to use IE, as I am now) but with the same results when I run. I did chose to save my settings, so if something has changed here so maybe that's the problem.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• the image fit more into the window.

  Hi all

  I tried to display an image and adjustment in the window but the image is displayed in the window of the half.

  Can someone give me a hand please?

  Here is my code.

  stage.scaleMode = StageScaleMode.SHOW_ALL;

  internship. Align = StageAlign.TOP_LEFT;

  var myImageLocation:URLRequest = new URLRequest("..) ("/ image/iconWithTextDT.png");

  myImageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, onImageLoaded);

  myImageLoader.load (myImageLocation);

  addChild (myImageLoader);

  private void onImageLoaded(e:Event):void {}

  var scale: Number = stage.stageWidth / myImageLoader.width;

  If (myImageLoader.height * scale > stage.stageHeight) {}

  Scale = stage.stageHeight / myImageLoader.height;

  }

  apply the image scale

  myImageLoader.scaleX = myImageLoader.scaleY = scale;

  }

  You can try this code

  var myImageLocation:URLRequest = new URLRequest("..) ("/ image/iconWithTextDT.png");

  myImageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, onImageLoaded);

  myImageLoader.load (myImageLocation);

  private void onImageLoaded(e:Event):void {}

  var bm:Bimtap = myImageLoader.contenet

  var appwidth:Number = stage.stageWidth;

  var appheight:Number = stage.stageHeight;

  var imageWidth:Number = bm.width

  var imageHeight:Number = bm.height

  if(ImageWidth>ImageHeight)

  {

  BM. Width = appwidth

  BM. Height = appwidth * (imageHeighr / imageWidth)

  }

  on the other

  {

  BM. Height = appheight

  BM. Width = appheight * (imageWidth/imageHeight)

  }

  addChild (bm);

  }

• U2415, its port on the monitor using headphones (ongoing displayport) has an audible hiss

  Hello

  I have trouble with two U2415 SSS monitors that I bought this week, when I plug headphones into the monitor there is a low volume generated from the monitor. When I plug the headphones in the respective computer audio port, there is no whistle - just silence.

  It is not a problem when playing sounds, but saw the helmet wearing while there is nothing else game is boring and it is hard to focus.

  The sound comes on displayport monitors, and the volume is controlled by the operating system (Win10 / OSX via soundflower).

  The computers and monitors are all on the same land/Jack.

  Is it possible to fix this? I am at a loss, and frankly the audio port on the screen is useless in this State. It would be nice to make it work, because it would mean that I could reduce the number of cables, I need to plug / unplug it when you move stuff.

  Please find below information on the installation of my computer (s).

  
  The computers tested: Custom PC with nvidia gfx, MacBook pro, Asus Zenbook
  * OS: Windows 10, OS x 10.10
  * Video card: Nvidia GeForce GTX670, Intel Iris Pro 5200, GeForce GT 840 M
  * Driver version: Windows Nvidia 355.98, for OSX I don't know
  * Ports: PC: displayport and dvi, mac: lightning/miniDp, zenbook: miniDp
  * Ports used: dp-> miniDp, miniDp-> dp, miniDp-> RFP
  * Cable: the miniDp provided-> dp cable and a 1 m deltaco miniDp-> dp cable
  * Resolution: 1920 x 1200 @60 Hz
  

  Best regards
  Erik

  Headset must be connected directly to the computer, not on the screen. The U2415 user's Guide page 11 States, "use of the helmet is not supported for the line audio output connector.".

  

• Mounting root failed. Falling into the shell of the basic maintenance

  Hello

  I bought a AMD Phenom X 4 955 3.2 GHZ processor, card mother gigabyte GA-MA785GM-US2H in support / 6 GB DDR2 RAM / 500 GB SATA drive for Vmware ESX 3.5 learning product.

  In the above configuration, I have installed windows xp 64-bit operating systems and continue to install vmware workstation 6.5.

  Since the VM workstation, I can able to install ESX3.5 UPDATE2, but I was not able to start properly, please visit below mentioned error.

  "The root of mounting failed. Falling into the shell of basic maintenance.

  To collect newspapers for VMware, connect a USB storage device and

  Run "bin/vm-support.

  Machine will be rebooted when you get out of that shell. »

  The same has been tested on windows 2003 Enterprise Edition server / windows 7 32-bit / windows 7 64 bit also, please help me solve the problem.

  Hello

  So if I understand you well, then the configuration 'ESX in a box' now works for you, except that you see only a single error NUMBER?

  I am not convinced that NUMA is supposed to work in this environment, but I have no material here to test and verify your results.

  NUMA support requires specific BIOS and physical characteristics of the motherboard.

  Here are a few more documents on this subject.

  Ensure your hardware is working properly

  VMware ESX server monitor internal error * vcpu-0: make the bugNr = 17332

  In the VMkernel newspaper and on the ESX console error: CPU TSC:27393110 0: ACPI:998 0: no memory detected in the SRAT 1 node

  The second document has notes on how to disable the error if it bothers you.

  You can also try to increase the memory on the ESX host and see if that helps.

  --

  Wil

  _____________________________________________________

  VI-box tools & scripts wiki at http://www.vi-toolkit.com

• Please connect more than 1 monitor into a CPU?

  I want to connect more than 1 monitor into a cpu.

  chris127 wrote:
  

  I want to connect more than 1 monitor into a cpu.

  Hello

  You cannot connect any monitor a CPU (central processing unit, also called the processor). You can connect several EXTERNAL monitor to your laptop , BUT for many portable normal you need to buy more hardware.

  Now, my question is what is your laptop?   Please follow the instructions below to find the product/model of your machine:
  
    http://support.HP.com/us-en/document/c00033108
  
  Kind regards.

• My iPod stop now, it won't turn even after be plugged into the power supply for more than an hour

  IiPod touch than 64 GB itself now cut an hour plug into the current af it starts

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Just got a monitor hpx2301, can I plug my xbox 360 into the HDMI?

  Can I plug my Xbox 360 into the HDMI

  on my new monitor, it's a hp x 2301

  Thank you

  As long as you have an HDMI cable to connect your XBOX 360 console to your 2301 x monitor, I don't see why it wouldn't work.

  Frank

• Anyone can check if the monitor V196HQL Ab accept a VESA mount?

  Anyone can check if the monitor V196HQL Ab accept a VESA mount?

  A picture of the back of the monitor would be great!

  Yes, the V196HQL has VESA mounting points.

• When I download creative cloud and go into apps download illustrator, under the applications section, it says download error. tried to download several times more, again the same error. What can I do?

  When I download creative cloud and go into apps download illustrator, under the applications section, it says download error. tried to download several times more, again the same error. What can I do?

  Hello

  I think that you have found the "download error" in the Apps Panel.

  Please check the help below document:

  Download error in the applications tab of Creative Cloud Desktop Application

  You can also view the threads below:

  https://forums.Adobe.com/thread/1832357

  Persistent Cloud error - error download - creative

  Re: Creative Cloud "Download error" message

  Kind regards

  Sheena

• This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  I tried to connect a new TV to my 8700 with HDMI and I get this message:

  This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  1. power off the computer
  2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable.
  3. turn on the computer

  I unplugged from the back of the computer and put it in my drive macbook & blu - ray. Both worked.

  I tried to find a solution to this already, but none really helped.

  Thank you.

  You need a video card, not the port on your computer HDMI connection:

  

• the computer keeps going into hibernation... How can I get the monitor turns on and stop reading "monitor is asleep."

  The monitor lights. It reads monitor is asleep. Sometimes if I'm patient enough for the computer to turn on and off the screen lights up and indicates that the computer has been hard to get out of hibernation. How can I disable hibernation?

  Hello melissacrowley,

  1. you have the latest drivers installed for the graphics card on your computer?

  I suggest that you update the drivers for the graphics card and check if you have the same problem. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• T530: Cannot get into the bios

  Hello.

  The issue of this link does not seem to be solved with the last update of the BIOS (or it's a similar question).

  I'm running 2.04 and since I have set to UEFI boot only I can't get into the BIOS. When I press Enter to interrupt normal startup the screen goes black, it seems to interrupt the boot but nothing looms on the screen. Starting continues after a few seconds (I guess that after the time-out of the screen of the interruption).

  There seems to be a problem with the code modesetting, because if I connect to an external monitor to the VGA port everything works correctly.

  Note that what is happening with optimus, as well as with only the active Intel card.

  Thank you.

  This seems to be fixed with the last BIOS update (2.07).

  Although a little more comments would be welcome.

  Thank you.

• Why do the monitors on Windows XP suddenly change their colors?

  Mine has suddenly changed his light greenish blue to dark green, and the icons on my desktop are reddish.  A few sites I visit are difficult to read.  I was trying to access some info at the time flash player.  Can anyone suggest how to fix this?  It's very frustrating.  Thank you.

  The graphics 'card' he pilots and drivers can be updated, but I doubt that the problems you are having are associated drivers.

  The "map" can be a map of component discrete snap or maybe it's just the chips that are integrated into the motherboard of the PC. Look at where you connect the VGA monitor cable. If there are plenty of other (different) connectors on the same plate then your motherboard has an integrated graphics card. If there is only one (or maybe two) connectors, so you have a discrete graphics card.

  I repeat my previous opinion, if you can't get through test yourself, take the PC and follow for a repair installation, ideally one that you can get a recommendation for and put the matter in hand. Try to get the free diagnosis, it shouldn't take more than a few minutes. Then, get a quote before agreeing to pay anything.

  Tricky

• We get an error "no audio device is installed" as he tried to use the cable from the monitor to TV

  * Original title: vista home version lost his

  Recently bought an Emerson TV that is has a PC plug. Hooked to the TV for the monitor cable and bought a mini audio cable with one end plugs into the speaker jack the rear of the computer and the other end of this cable is divided into a red RCA plug and a white RCA connector to the audio on the TV.

  Played a movie and it displays fine but I have no sound. So everything disconnected and hooked my computer following up and my external computer speakers back up exactly as it was before still have no sound.

  in the toolbar at the bottom right hand of the screen, the "speaker" icon displays red X and when I move my mouse jumper on it the message appears "no audio device is installed".

  Help!

  Jerry Fulkerson

  Hello

  You can first check in BIOS advanced settings if the onboard sound is enabled.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please follow the steps below and we update with the results.

  Method 1: Follow the steps in the following article and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   

  Method 2: Update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Let us know if it helps!