e310dw - updated firmware on Linux - how?

Similar Questions

• Sansa C250 v2 (01.01.05P). microSDHC? update to the latest firmware? Linux questions.

  People of greetings,

  just got my refurbished Sansa C250 2 GB. Back to v2. Parameters a 01.01.05P for the version number.

  I read somewhere on these forums that even if v2's back, it does not mean necessarily that the player is actually v2. Is this true? How can I tell what version it is?

  So should I upgrade to the latest firmware and which?

  I plan to buy either a 4 or 8 GB card microSDHC. Advice please.

  Anyone who has used linux to update firmware and for all other operations or would I have to use windows?

  Thank you

  Prasad

  Well, since nobody answered my questions, I will answer them myself.

  As has been said on this forum and others (http://www.anythingbutipod.com/forum/showthread.php?t=24680), this is the version of the firmware that you use to know the version of your player. Mine is v1. I think another, or should I say a sure way would try to penetrate into the first partition (or the partition to install the firmware) - If your drive is v1, it would be to put your player mode waiting (moved to the rec and orange shows on the left button) press and hold the rec button and plug it into a computer should appear the partition of 16 MB. V2 has a different key sequence.

  Since it is highly recommended to upgrade to the latest firmware, I upgraded to 01.01.00P which, by version number appears a downgrade, but it is what is here to... He did bring back the USB menu however.

  Since then, I could install Rockbox (http://forums.sandisk.com/sansa/board/message?board.id=c200&thread.id=3396), I'll go ahead and buy a 8 GB microSDHC card. Will post here when I get it to let you know if it worked or not. I think that should be. This post helped me decide to go ahead and buy it: http://www.anythingbutipod.com/forum/showthread.php?t=35302.

  I used two Fedora-7 and live CD Fedora-9 (on USB) - no problem.

  just something I did - I took a return of my entire 2 GB (after formatting the partition of 2 GB to get rid pictures and music that came on the player). used dd if = / dev/sdc. gzip - c > sansaC250. Also saved the first (16 MB) partition dd if = / dev/sdc1. gzip - c > sansaC250part1. I just thought I might be able to use it if I bricked my drive when rockboxing it. I don't know if restore partitions (or the entire disk) is unbrick it at all. Happy had to use it.

  Take advantage of...

• Update firmware on Satellite A200-1gh - noise emissions under Linux

  Hello

  I have a serious problem with the sound on Toshiba laptop. Many people have the same problem I have.
  An example:

  ________________________________________
  Hi there everyone
  straight to the point, I got no sound running ' bt3 beta computer laptop - Toshiba satellite a200 - 14 d, HD audio - Realtek ALC862 @ Intel 82801GBM ICH7-M - audio. I tried to fix it with a blender Kmix or alsa, even downloaded the Realtek driver name and installed, but bt3 built in Realtek driver. Still nothing"
  ________________________________________

  My laptop contains this sound card: 00:1 b. 0 Audio device: Intel Corporation 82801 G (ICH7 Family) High Definition Audio Controller (rev 02) @ Realtek ALC861-VD. There is a problem somewhere in the firmware of this map or the Linux kernel.

  We use Backtrack 3 who is Slax based Linux distro.
  I've been with many professional talking about Linux, Bud, no one is really sure what is the problem. They said several things to try; one of them is updated firmware. I've never done this before, I'm looking for help.

  Number of exact model of my laptop is Toshiba a200-1GH psaece

  Please help if you can

  > There is a problem somewhere in the firmware of this map or the Linux kernel
  What are you talking about boyfriend? This firmware of the sound card that you hear?
  I think you're confused.

  First of all there is NO firmware for the sound card. Second, the sound card is controlled by sound driver.
  Always is it that Toshiba laptops are preinstalled with Windows OS.
  Linux is not supported at this time, and you won't find driver for sound card for Linux.

  If you need a sound driver for this sound chip, you will need to download it from Realtek Web site!

  That s all about your firmware to his mysterious map.

• Disk image to update the firmware in linux?

  I recently bought the a Ultra II SSD 240 GB and I wanted to make sure I'm using the latest firmware. To my surprise, there is no way to update the firmware in Linux.

  My current firmware version is X31200RL (the description of disk indicates this)

  It is the most recent?

  Are there links to the upgrade image that I missed? Even if you can confirm that I am on the latest firmware at the moment, I would like to be able to improve in the future if a new appears.

  A simple link to download the iso file would be sufficient, given that most Linux users are users anyway.

  Thank you

  you have the last FW for the Ultra II SSD. If a FW is released sandisk ISO messages which can be burned on a CD to update on Mac and Linux on this forum and the sandisk knowledge base.

• How to install updated firmware on hp color laserjet 3000dn

  I downloaded the drivers updated firmware for my computer. I need to know how to get the update to the printer?

  Double click on the Firmware. It automatically detects the printer if it is connected to the computer and a update button will be available just click on it and follow the instructions on the screen.

• Update Firmware of BMC R610 of linux

  Hi mates,

  I need to update a few R610 servers, I would like to only update the BMC Firmware if possible without shutting down the machines, is - it possible? I'm running debian on these machines.

  I open it because I've been Googling much this and I found that maybe there are several ways to update the firmwares of server, including the iDRAC completely update, etc., but I am only interested to get the latest patches of cooling, so I guess that should be only update BMC.

  Could you please some direct me in the right direction? I looked and I found some binary files in dell FTP, but I need to be sure of where to find the correct firmwares for my machines and what is the most common method through linux so far.

  Thank you comrades, I appreciate the help.

  Hello

  There is no separate BMC firmware in R610. You need to update firmware iDRAC who BMC features as well. Down, you can load the latest firmware iDRAC at the bottom of the location

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-R610?driverId=63KCR&osCode=NAA&FILEID=3287900761&LanguageCode=en&CategoryID=es

  You can update the firmware iDRAC without stopping or restarting the system. As you have debian on these machines, I recommend you update iDRAC using Web GUI. You can check below link with a video on the updating of the process. First half of the video is on the download of the image that has changed a bit. You can download the File Format 'Application' link above.

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3206.updating-DRAC-firmware.aspx

• Update firmware H730 on ESXi

  We have two R530 running ESXi 5.5. They run slightly updated firmware on controllers RAID minis H730 I would like to update.

  The problem is the firmware update files I can find are if you are on Windows or Linux. How do I the R530 firmware update if I run ESXi? I am aware of the image of Dell SUU, but it's more than 10 GB is size, which is much too big, even for a DVD double layer.

  Dell do not seem to offer a "hard drive" version of the firmware from what I see.

  tonybarrett in your case, you can start in the LCC (Life Cycle controller) to perform updates to the server.

  1.demarrez Lifecycle Controller: press within 10 seconds after the Dell logo appears.
  2Click on Firmware update and update Firmware of the launch.
  The select the update repository page appears.
  3Select FTP server as source location and then click Next.
  The enter access details page.
  4 in the address box, type the host or IP address of the FTP server name, and then click Next.
  Server FTP from Dell (ftp.dell.com)
  5The latest firmware is downloaded from Dell's FTP server, internal FTP server or FTP server of the service provider.
  The select updates page appears. For a component, compare the currently installed firmware version and the latest version in the current and available column.
  6Choisir the required components.
  7Click applies.
  Once the update process is complete, the system restarts.

• Update firmware 7.7.7 7.6.7

  My airport express and extreme are updated to firmware again offers:

  7.7.7 and 7.6.7 for adults.

  It is not announced and what's inside

  7.7.7: Airport Station of Base of the Firmware Update 7.7.7 Information

  On the Firmware Update 7.7.7 Base Station Airport

  Update firmware 7.7.7 is recommended for base stations all AirPort Extreme and Time Capsule to airport with ac 802.11. This update improves the stability and performance of your base station.

  This update:

  • Resolves an issue that may prevent communication between clients on the same network
  • Improves performance with an extensive network of comments
  • Resolves conflicts of potential names with Hello sleep Proxy

  For more information on updates firmware of base station at the airport, including instructions how to install the update, please visit: http://support.apple.com/kb/HT1218

  7.6.7: Airport Station of Base of the Firmware Update 7.6.7 Information

  On the Firmware Update 7.6.7 Base Station Airport

  Update firmware 7.6.7 is recommended for all Apple 802.11n Wi - Fi base stations including AirPort Express, AirPort Extreme, and Time Capsule from the airport. This update improves the stability and performance of your base station.

  This update:

  • Resolves an issue that may prevent communication between clients on the same network
  • Improves performance with an extensive network of comments
  • Resolves conflicts of potential names with Hello sleep Proxy

  For more information on updates firmware of base station at the airport, including instructions how to install the update, please visit: http://support.apple.com/kb/HT1218

  For more information on the use of products from the airport, go to the Support Page at: http://www.apple.com/support/airport

  Kind regards

  Shawn

• Update firmware - fmwre-20121227104955

  Downloaded this update of the software from Toshiba Tempro link provided. The name of the program is R8T02_CXP9018817-1 - mupdater.exe - he could not initialize. All other updates have been installed without any problems.

  Could a forum user / member please tell us which relates this update of the driver, if it is an essential update, and if so, how should I proceed to install?

  It is normally advisable to install the updates from toshiba informed via Toshiba Tempro? This is my first Toshiba computer and so relatively new to this.

  Any help will be greatly appreciated

  You have a laptop with module 3 G Ericsson?
  If so, the update of the firmware of R8T02 could be linked to the Ericsson 3 G Module

• Satellite A45: need to update firmware on DVR K12D drive

  Hello...
  IM new here... Well, I have a toshiba > Satellite A45 Series... which had a DVD Multi Drive (DVR K12D) inside. The problem is that his operation stopped. Sometimes she would write a CD then sometimes it spoils my CD. I used on the media player were Verbatin, Imation, Supermedium, Sony.

  Well the reader works as a very short period and then dies OFF... every time I took it to the repair center...

  The drive has been changed now 4times by toshiba support. I asked for the release of Firmware from 1.05 to 1.15 or higher. They keep answering back telling me to ask pioneer. But it is an OEM obvious by toshiba.

  The player after having been changed stops working without delay of 2 to 3 months max 4 months time and den customer tried upgrading the drive by putting a higher config recorder multi disc double tht is the 8 GB one. The satellite detects that hardware.

  been 2 years now my readers send me problems such as:

  does not read DVD
  doeant read CD RW
  don't write CD/DVDs
  sometimes DVD detects any sometimes they detect its weird.

  The only solution is to update the firmware, but how can I do? I need the update of the firmware. I called toshiba WE also, they talked for two hours and then answer that I have to contact pioneer!

  Please help me!

  Vik!

  Hello

  CD/DVD players support generally not all means.
  As far as I know in the manual you will find a list of the CDs and DVDs is supported and it works properly.

  In addition, it seems that this device was designed for an American market and in this case, you should look at the Toshiba Site us.

  I checked this American site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There, I found several notebooks A45 and the necessary drivers. I also found a driver for DVD rom and ram. It s not a firmware update but maybe it helps.

  However, on Toshiba Europe site, I found several updates firmware for the readers and the different European books but as I said at the beginning you have a US laptop and have to look on the American website. If you don't get an update of the firmaware if you ask the manufacturing of the car.

  In addition, I want to say that you can not be sure that, after updating the firmware of the player will not work correctly. This kind of malfunction looks like a defect of lens calibration and therefore only a replacement disc can solve this problem.
  If the drive has been replaced several times so I guess that the guarantee is valid and you will get a new.

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• Unable to update firmware for the PERC 5 controller / i on PE1950

  We have 6 PE1950 server with SAS PERC 5 / i integrated RAID controllers. Dell OpenManage complains about being obsolete PERC firmware. 2 servers I currently have running, firmware 5.2.1 - 0062 and 5.1.1 - 0040. I downloaded the latest version of 5.2.2 - 0072. I tried the update by the Windows package and who did not, and he complain about the OS being too recent. A server is Windows Server 2008 R2 and the other Windows Server R2 2012. So, I created a BACK USB key with Dell hard drive files and run update.bat. Who failed on both servers with the following errors:

  Firmware doesn't have flash. Stop!

  Failed to update Firmware for controller 0

  The process of updating of the firmware of the controller does not have!

  Both servers had the exact same mistakes as described above. Ideas on how I can get the firmware update successfully? I checked the package I downloaded is for the PERC 5 / I integrated.

  It's here (if that will allow me to post a link):

  www.dell.com/.../DriversDetails

  Hello

  Try this updated version and see if it works. He said that it was for the 1950s.

• Update Firmware EX60

  I have an EX60 but you must update Firmware before I can get it added to my network.

  I downloaded the upgrade, but am not sure how you install.

  Connect to your network for the few minutes it would take to download the software would be much easier than other methods because they will ask you to go through a tedious process of connection to the endpoint manually through the console cable.

  You can upgrade the EX60 via a TFTP method using your computer, see download-tftp-server-review-2.  Another document that describes the TFTP method is troubleshooting-ex-series-mx-series-sx-and-c-series-codecs count of 128 pg.  You will need to connect to the EX60 using a serial cable special, below is two methods of manufacturing such a cable.

  ex90-making-console-cable-and-consoling

  ex90-make-console-cable-using-ca42-usb-data-cable.

• Satellite Pro A300 PSAG9E - unable to update firmware

  It has come to my attention that my laptop will not install updates of the firmware.
  I tried all updates firmware on the Web from Toshiba site and on-site support for other countries but still no luck.

  My laptop is a series of Satellite Pro A300 PSAG9E and when I try and install a firmware update a box telling me it's not compatible with my system.
  I checked the version proposed by the pdf file and I know that it is the basic version before the update, and I'm sure I have install the correct way of m.
  So I don't know what goes wrong.

  Does anyone else have this problem or knows something that could solve this problem? Because I'm at a total loss.

  Thank you

  Hello

  The European driver Toshiba page provides three firmware updates;

  _UPDATE for drive_ TS-L632
  + Changes have been made in order to correct the following: +.
  + Impossible to burn songs on iTunes to some CD media. iTunes error "the attempt to burn a disc fialied. An unknown error occurred (2131)"is displayed. +

  _UPDATE for drive TS-L632P TO02_
  + This firmware solves some problems in the optical disc drive. +

  _UPDATE for TS-L632H drive TO03_
  + This firmware solves some problems in the optical disc drive. +

  You have a TS-L632P and TS-L632H drive?
  Isn't it? Then you cannot update the firmware.

• Satellite M40-101 cannot update firmware

  I tried to update firmware for my dvd - rw on M40-101 laptop drive, but when I start the program it says only "the target disk is not connected". What to do with it? the problem is perhaps cause firmware for dvd - RW drive Matsu * a UJ-831, but the model is actually UJ - 830B?

  Post edited by: ruselok

  Hello Ruselok

  Where did you find this update of the firmware? This firmware update is given by Toshiba?