Satellite M40-101 cannot update firmware

Similar Questions

• Satellite M40-237 - cannot update programs

  Hello

  When I try to update the program to my laptop on my account in the Web from Toshiba site I have error and the message (path error: the page you are looking for does not exist).

  However, I bought new external Hard Drive WD (My Book Essential) and also I have problem with my computer while I contact the hard
  the next blue screen and I have to restart my computer.

  How can I communicate with my hard drive?

  Kind regards

  Satellite M40 - 237 part number: PSM40E-08E03EAR features - enjoy mobility high performance in an elegant design with Intel® Centrino mobile technology and the powerful Intel® Pentium® processor M
  -Windows® XP Home Edition unlocks the full potential of this device
  -Live the emotion of the 3D graphics and games of state-of-the-art thanks to the powerful chipset ATI MOBILITY RADEON® X 300 with up to 128 MB of video memory and support for Microsoft® DirectX® 9.0
  -Get the best multimedia mobile with looks a superb quality on Toshiba TruBrite (some models), 15.4 ", supported by the SRS® TruSurround XT technology and Harman Kardon® stereo speakers
  -Equipped with a button Express Media Player instant on access to CD/DVD playback without the need to start the Windows® operating system
  -Expansion is quick and easy with the permission of the bridge 6-in-1 Media slot, 3 USB ports, i.Link®, quick of new technologies of the ExpressCard and PC Card

  Hi majed_m_j,

  > When I try to update the program to my laptop on my account in the Web from Toshiba site
  To be honest I m a bit confused. Which account you average and where you try to download updates?

  On your external HARD drive: you get a blue screen, it's just?
  Well, have you tested the disk external DRIVE on another computer? If this is not the case, this!

• What is max capacity of the HDD on the Satellite M40-101

  What is the maximum capacity of the disc HARD can be installed in the laptop M40-101?

  To my knowledge, some of the Mobile Satellite M40 were shipped with the hard disks of 80 GB (IDE).
  I didn't find any official Toshiba information about supported tough max, but I guess you should be able to use the 100 GB drive HARD; Maybe a 120 GB HARD drive too.

  Seems that you have to test.

  Best regards

• Satellite A45: need to update firmware on DVR K12D drive

  Hello...
  IM new here... Well, I have a toshiba > Satellite A45 Series... which had a DVD Multi Drive (DVR K12D) inside. The problem is that his operation stopped. Sometimes she would write a CD then sometimes it spoils my CD. I used on the media player were Verbatin, Imation, Supermedium, Sony.

  Well the reader works as a very short period and then dies OFF... every time I took it to the repair center...

  The drive has been changed now 4times by toshiba support. I asked for the release of Firmware from 1.05 to 1.15 or higher. They keep answering back telling me to ask pioneer. But it is an OEM obvious by toshiba.

  The player after having been changed stops working without delay of 2 to 3 months max 4 months time and den customer tried upgrading the drive by putting a higher config recorder multi disc double tht is the 8 GB one. The satellite detects that hardware.

  been 2 years now my readers send me problems such as:

  does not read DVD
  doeant read CD RW
  don't write CD/DVDs
  sometimes DVD detects any sometimes they detect its weird.

  The only solution is to update the firmware, but how can I do? I need the update of the firmware. I called toshiba WE also, they talked for two hours and then answer that I have to contact pioneer!

  Please help me!

  Vik!

  Hello

  CD/DVD players support generally not all means.
  As far as I know in the manual you will find a list of the CDs and DVDs is supported and it works properly.

  In addition, it seems that this device was designed for an American market and in this case, you should look at the Toshiba Site us.

  I checked this American site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There, I found several notebooks A45 and the necessary drivers. I also found a driver for DVD rom and ram. It s not a firmware update but maybe it helps.

  However, on Toshiba Europe site, I found several updates firmware for the readers and the different European books but as I said at the beginning you have a US laptop and have to look on the American website. If you don't get an update of the firmaware if you ask the manufacturing of the car.

  In addition, I want to say that you can not be sure that, after updating the firmware of the player will not work correctly. This kind of malfunction looks like a defect of lens calibration and therefore only a replacement disc can solve this problem.
  If the drive has been replaced several times so I guess that the guarantee is valid and you will get a new.

• WAG160N - cannot update firmware de.09

  I downloaded the updated firmware (A Anex).15 but no matter what I try, I can't firmware to stick.

  (1) I tried the Firmware Upgrade option via the HTML interface to the router. I select the file (WAG160Nv1-EU-ANNEXA-ETSI-1.00.15-code.img) and click on the upgrade button. It seems to be loading the file in, counting to height of the percentage until it got to 100%, then the screen seems to be messed up. I turn off the router for 30 seconds and then on again, but it remains as version.09. I also tried the reset button for 30 seconds and then turn off now. No diff.

  (2) have also tried the TFTP.exe program without success, because it cannot connect to the server as it is said that there is no reply from her.

  I have screenshots if anyone is interested.

  I am at a loss. Certainly not a local help available by phone. Must have stuck to DLink - at least you can call.

  Does anyone have a similar experience? A way around it?

  (And reason for wanting to upgrade est.09 keeps giving up DSL connection and Wireless disappears.)

  -MARK

  Have you tried to update the firmware of your router to the other computer? Before you try to update the firmware of your router, turn off the firewall and Antivirus on your computer?

• Cannot update firmware Officejet 6500 has more

  I just receivevd my new Officejet 6500 a Plus (e710n-z).  The status page shows a f/w Rev. CIP1FN1110AR.  I did a search for updates on the printer itself and he says it's not.  I went to the 6500 a Plus page Web on HP.com and find f/w CIP1FN1126AR (OJ6500_E710n - z_R1126A.exe).  It is obviously a most recent version, right?  So I download it, then run it.  It works very well and even detect my printer.  However, the printer is gray and under STATUS does not say there is.

  Can anyone help with this?

  Thank you!

  Sea

  I am employed by HP

  If my post helped you... click on the LAURELS on the left to say thank YOU! ***

  I DID IT!  I finally got the updated firmware update!  Gotta think sometimes off the beaten path!  I am a technician in field HP and normally we cannot simply click one. EXE firmware update.  Then that which made me think to extract the. EXE (see previous post).  Then I thought about the update via USB, in the same way that we do it not connected to network Laserjet printers and it worked!

  So what you have to do is extract the file update package .ful (OJ6500_E710n - z_R1206A.exe), I used 7zip for this.  Then rename it and place it in the root of C: I just renamed mine fw.ful, short and sweet.

  Then you need to share the printer, use a name that is short and sweet.  I called mine Officejet.

  Then I went to a command prompt (not sure if it was necessary, but only in the case) and copied the firmware file.  Here is the command that I used

  copy/b c:\fw.ful \\your computername\printer sharename

  My printer works now the firmware version 1206!  Not sure why it wouldn't run and update you want to its supposed to but at least now we have a way to do it.  I hope everyone can get what goes on their printer.

• Satellite M40-244 - cannot start from CD after driver change

  Hi all

  I have a Satellite M40-244 and the original DVD drive is faulty. So I changed the drive with one that is exactly the same (same brand, same date of manufacture).

  Under Windows, the new disk is recognized and works perfectly. However, when I try to boot from the CD, I am not able to do. I successfully changed the boot sequence in the bios, I tried all possible combinations without success.

  One thing I remember is that when I tried to boot from the faulty driver, I got the message 'Not bootable CD' (the tested CD is bootable and tested on other computers)

  Any idea anyone, I desperately need to install a new OS. :-(

  Hello

  I doubt that you can boot from CD t if your drive works properly in Windows...
  You can try another disc of starting, for example the Toshiba recovery disc or the disc from Microsoft, please?

  Alternative try to load the default settings in the BIOS.

  Good luck! :)

• Satellite M40-107: cannot re - install Powersaver - Code 0x7E

  Recently, I had to re - install Windows Xp on my Satellite M40-107 (PSM40E). Everything went well. Finally, I wanted to install the powersaver and I downloaded the latest version for my machine from the Toshiba web site. Installation fine until I press the complete installation (kerncentrale).

  A pop-up window appears with the message: fatal error, this programme will be completed. Code 0x7E.

  After restarting the same message appears until the powersaver is removed from the Board to run.

  Who can help?

  concerning
  @b

  Hello

  It seems that there is no general solution for this problem.
  I found and read a few comments on the similar problem, and it seems that the Toshiba recovery CD installation will eliminate this error message popup.

• Satellite L650D-101 - cannot insert the cards correctly

  I just bought a Satellite L650D-101 and have tried to use the SD card reader multi/on the right side of the laptop, but I can't seem to put a card inside. Its just an inch from 1/2 open space and I can see no way to correctly insert cards.
  How do you do that?

  I try to put a card in and it won't "connect" with anything and then its too far in a little loose and it gets stuck and I have to remove it with treezers. User manual says just put in it, but the slot seems too big/deep for any card. Am I missing a piece for the laptop or something?

  Thanks for any help or suggestion!

  Hi Sophiedb,

  What are the cards you are trying to insert?
  And you can post a picture of this card reader do you mean?

  As far as I know Satellite L650D-101 support the following cards:
  SD card, Mini SD card, Micro SD, SDHC, MultiMediaCard, Memory Stick card card card, Memory Stick Pro card

• Satellite 2450-101 and updated updated to XP Pro

  I have a Satellite 2450-101 with XP Home OS pre-installed.

  I want to upgade for XP Pro but have seen offer published on the web that the upgrade of some Toshiba laptops is not possible. Everything can tell if they have had an experience of the present.

  [Edited by: admin February 11 06 08:15]

  Hello

  The upgrade of the software is possible. You can install WXP Pro without any problem. The drivers, tools, and utilities are the same. Please use your Tools & Utilities CD and install them manually. If you have it t n visit the download page for Toshiba under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good luck!

• Satellite Pro A100 - cannot update driver ATI

  Hello!

  I have a problem with my graphics ATI Mobility Radeon x 1600 card card. I can't update to the latest driver from the ATI. The program says that it can not install on my system - contact company for the most recent driver. But the one that is provided by Toshiba is almost two years!
  It all started with, that I could not run FIFA 2009... even if it clearly States in EA own manual that this graphics card is supported! But I do not see everything in the game - except the players. Only their shadows are visible...

  I know it's a lot, but I'm pulling the hair here!

  HEEELP!

  BTW: my system: Toshiba Satellite Pro A100-PSAACE - Core2Duo 2.0 GHz, 3 GB RAM, 120 GB of HARD drive Windows XP Pro.

  I really wonder that many people do not understand why the laptop manufacturers don't offer drivers for graphics cards so often.
  Each laptop manufacturer deals with design, hardware components and drivers used for the operation of the equipment. On laptops, hardware components are miniaturized and placed close to each other. This means that the heat and is a common problem for the designers of the laptop.

  Each computer laptop (hardware, drivers, BIOS, cooling system) is designed to operate in optimal conditions. If you want the new driver that can force a graphics card to run on the maximum limit, the result will be more heat. More heat means more risk for damaging hardware and overheating.

  So to laptops, there are limits that must and should be respected. Graphics card manufacturers cannot just offer new drivers for laptops and be responsible for the damage. When some owner of the laptop is damage graphics card because of the driver who should be responsible? ATI or Toshiba?

  For this reason, graphics card manufacturers say clearly: If you want the new driver laptop computer contact the manufacturer. Manufacturers must also protect the customer s of material and be careful with this stuff.

  So I think you see how it works and the display driver update will be probably endless discussion on each laptop computers forum.

  Good luck!

• Satellite U300-11v: cannot update Bios - error code 5 - without administrator rights

  I have recently bought a laptop Satellite U300-11v and use Tempo of Toshiba alerts.

  He advised me to update Bios driver - I have downloaded on my desktop.
  When I try to run the program I get the following message - "cannot load the driver, C:\Users\Sue\Desktop\bios-2007 1023123728\PHLASHNT. SYS -"Please verify your account. If you have no privilege administrator please log in again.

  I checked and there is only one user on the laptop - Sue and I am also administrator.

  Please tell us what to do. Thank you very much

  Click with the right button of the mouse and choose Run as Administrator option. Can you please point out if this helps or not?

• HP Laserjet M1217nfw: Cannot update firmware HP Laserjet M1217nfw

  I've identified that HP has a newer firmward for my HP LJ M1217nfw.  My config report says that my firmware is 20130912 and the HP site has a 20150405 version.

  I found and downloaded the firmware update utility. I have install and send the Firmware. The printer says 'Programming' but then a message appears on the computer saying he cannot communicate with the printer (it was printing fine before you start the process). Finally the LCD screen on the printer returns to the ready, but the config page print still with the old date of the firmware.

  What is going on? Is there a way to solve this?

  Not too sure, but you you better make sure you do not perform an update of the firmware wireless. You must use a cable.

• Cannot update firmware Poweredge R210 II

  Hello

  I get messages and errors below when you try to update the firmware on my server Poweredge R210 II. I use the BIOS of the Dell PowerEdge R210 II Version 2.8.0 server that seems to be the most recent version of this BIOS, but receive the following messages:

  * Red * please do not remove his power!

  Utility of flashing Insyde etc.

  100% of file loading

  Model name of the current BIOS:

  New model of the BIOS name: PowerEdge T110 II

  * Red * cannot use a BIOS "PowerEdge T110 II".

  * Red * in a «»

  * Red * Rom update not done

  etc.

  I saw the post following for the server in the subject line that has the same message above and points located on the server is an OEM box, but I'm able to open a support on the dell.com site page using the number of service on my machine. Any suggestions? Here is the message:

  http://en.community.Dell.com/support-forums/servers/f/956/t/19429285.aspx

  I managed to Flash the BIOS on my Dell R210 II XL OEMR back to the standard BIOS Dell Server version 2.8.0 by creating a BACK USB startup disk, copy the unpackaged Dell BIOS file, in my case, I used PER210II_020800.exe, and then running the following command: "PER210II_020800.exe - wipeclean - forcetype.

  The switch - wipeclean clears the ESCD and DMI data tables and the forces of switch - forcetype BIOS file to install on any Dell server.

  Here is a list of the other switches used during the update of the BIOS.  Be careful, however, you easily could brick your server if you use these incorrectly.

  mickitblog.blogspot.com/.../Dell-BIOS-switches.html

• Satellite U500-10N - cannot update display driver

  Hello

  Recently, I tried to update my ATI mobility radeon hd 4500 series of v8.17.x.x.x to v8.6.x.xx.
  I downloaded the drivers but when trying to install nothing happens and the mouse cursor disappears at the bottom right of the screen.

  My specs are:

  System manufacturer: TOSHIBA
  System model: SATELLITE U500
  BIOS: BIOS Date: 27/11/09 14:35:14 Ver: 2.30
  Processor: Intel (r) Core (TM) 2 Duo CPU P7350 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4092 MB of RAM

  Operating system: Windows Vista editions Home Premium (6.0, Build 6001) Service Pack 1 (64-bit)

  Any help will be appreciated.

  Hi Faze0924,

  > I downloaded the driver
  Where did you download the drivers?
  Page ATI drivers directly will not work if you use the drivers provided on the official website of Toshiba.

  And in general why you do a update display driver? Is this necessary?