E4g downgrade/upgrade

Similar Questions

• Downgrade/Upgrade from XP or Vista - Tecra A10

  I have Tecra A10 with pre-loaded Vista Business. I finished the installation.
  There are two things I'd like to know:

  1. If I downgrade to XP Professional using the product recovery disc that came with the laptop is there Toshiba Utilities and drivers as well or I need to download them manually?

  2. now, I don't have to activate my Vista, but in the case of the downgrade to XP, and most later upgrade possible to Vista again using Recovery DVD I made, I will have to undergo a procedure of activation?

  Thank you

  (1) the drive of Toshiba (with Win XP?) always contains the image files. An image is a package that contains Windows OS, drivers, tools and additional software. After installing the drive recovery it s not necessary to install all the drivers.

  (2) you can activate the Vista and can then create an image.
  This image contains the Vista activated. If a second activation is not required.

• Re: Satellite A300 PSAGCA-03C010 - downgrade from Vista to XP

  Hello

  I'm really new to all this, so I hope that will not ask a question that has already been answered :)

  I bought a laptop Toshiba Satellite A300 (model PSAGCA-03C010) in October 08. It came with a preinstalled version of Windows Vista Home Premium.

  Initially, using Vista was not too bad, but it happened at a point now where his things slows down and is really frustrating. Want to downgrade (/ upgrade) go back to Windows XP and I want to know the "implications" of this and if the Toshiba Utilities are consistent and will work with XP.

  First of all, can I use my ID current product that came with Vista and it enter the product ID when I install XP?

  Also, I am concerned about the Wi - fi, bluetooth, finger scan and HDMI applications - will this work with XP?

  Finally, when I created the "recovery disk", should everything go 'bad' when installing XP or if something does not work, can I use this recovery disc to return to the original "out of the box" installation?

  Thanks in advance and again once, apologies if these qns have already answered in other posts (im not too technical).

  Tamara

  > I'm really new to all this, so I hope that will not ask a question that has already been answered
  In many cases, these questions have been answered already and you might find useful views by using the Advanced ;) search option

  > Want to downgrade (/ upgrade) go back to Windows XP and I want to know the "implications" of this and if the Toshiba Utilities are consistent and will work with XP.
  Tools and Vista drivers are not compatible with Win XP. If you want to install Win XP and want to use all the features of the laptop you must make sure that the Win XP drivers are available for this model of laptop.

  Satellite A300 PSAGCA seems to be an Australian model. The drivers are placed here:
  http://www.ISD.Toshiba.com.au

  I checked this and found a few tools and drivers for this device.

  > First of all, can I use my ID current product that came with Vista and it enter the product ID when I install XP?
  No, you can not use it because it belongs to the Vista operating system preinstalled on your laptop.

  > Finally, when I created the "recovery disk", should everything go 'bad' when installing XP or if something does not work, can I use this recovery disc to return to the original "out of the box" installation?
  Yes, the recovery disk allows to reverse the laptop back to factory settings.
  You will get the same as on the first day of purchase

• Upgrading the Virtual Machine

  Is it possible to upgrade a Machine virtual VMware Player?

  Concerning

  Marius

  At the present time VMware Player does not have the ability to downgrade/upgrade virtual hardware and while it is technically possible to manually edit the necessary files, it is not something I would say even without really knew and understood what you were doing and it would be safer to use VMware Workstation to do, also while it does good that since I used VMware vCenter Converter however , I think that you have a limited choice of change hardware virtual because ESX using and older version of material there may also be other options depending on the version of the converter, sorry I don't remember from the top of my head, nor have the time to check.

• Repeated and constant crashes, Help!

  Firefox has been repeatedly crashing after that that it was opened to all an hour or two. Sometimes he says that it is because the container plugin has stopped working, but other times it just downright crashes and brings me directly to the window "send information to mozilla. I tried to reinstall firefox, flash downgrade, upgrade flash, etc, and it did not help.

  If there is no information that I can provide please respond I would be happy to provide all that is necessary to solve this problem.

  Disable the addon Ghostery and or try the mode without failure of firefox.

  • The problems of Firefox in Mode safe
  • bug 814594 NEW crash in JSC::Yarr:YarrGenerator:opCompileParenthesesSubpattern mainly with Ghostery

• Qosmio G35-AV650 does not start after format

  Okay, so I downgraded/upgraded my computer back to XP from 7 a month ago.
  Yesterday, I went to the library for all my updates and whatnot that I neglected since the upgrade. When I turned on the computer in the library, it would not be loaded the office correctly and an error box open stating that it was impossible to recover the THotkey. It turns out that my feature key drivers took a dive. I've done everything I can to solve the problem. Nothing worked, I decided to reformat.

  Early upward the dinosaur this afternoon when the format is finally finished, it would not fully boot screen where you are asked which language you want to use, what time format, all of these bases. I tried to reboot several times, finally tried safe mode, even to reformat again, nothing works.

  Now, seeing as I was only reformat to XP in order to enter my card default sound drivers to see if they would work on 7 (the company that made my card was bought shortly before 7 was released and that they still need to make new drivers), I decided to say screw that it and any format the computer back to 7. When it loads everything from disk (disk? drive?), it goes to the screen asking what disk I want to install, it says that I have no disks on which I can install it.

  I came across this problem before, the first time that I put 7 on the computer. Since I have two hard drives, it needs the RAID drivers that connect the two. I downloaded several different, all for Toshiba Qosmio G35-AV650 RAID drivers, but it detects all the drivers. The way I do it is to put on a flash drive and tell the computer to get them from there. I do everything the same way I did before, but nothing works at all. I tried to go into the BIOS settings, but I have no idea what I could do.

  I'm tearing my hair out trying to figure out what I can do here, but I'm completely lost. Any ideas?

  You use a generic Windows 7 disk? Or a Toshiba Win7 upgrade disk?

  Basically, you need the drivers SATA F6 (INFs) on a USB Flash drive during the installation of Win7. The version of Vista should work fine in Win7.

  You can change the RAID settings in the BIOS to "JBOD". First, make sure you back up important data.

• VISA: on the conversion of the other date to string

  I met a problem to make the series using VISA communication. When I convert the decimal value of 10 type that matches the CSA Code, there is an error, but another digital conversion is no problem.  Can someone help me?

  ben64 wrote:
  

  Isn't strange that the size of the VI went from 59K to 46K just renaming?

  Ben64

  
  I opened it in LV 2011 and back recorded on the original file 8.5 LV since I do LV 8.5 installed.  That the change in size may be the vs file saving code downgrade upgrade function.  But it's still a significant percentage.

• HP-15-ac120tx: hiw to install drivers in HP 15 AC120 TX

  Recently buy the loptop hp 15 ac120tx
  There is no single disc isn't the in it help me please
  Where to find 15 HP ac120tx
  Drivers?

  saivenket55 wrote:
  Recently buy the loptop hp 15 ac120tx
  There is no single disk is the in it help me please

  Hello

  You downgrade/upgrade your machine? This is not true; complete drivers for Windows 10 and Windows 7:

  http://support.HP.com/in-en/drivers/selfservice/HP-15-notebook-PC-series/8499326/model/8819350

  Kind regards.

• How to root my Xperia Ray (ST8i)

  I have the android 2.3.4 version and build number 4.0.2.A.0.62

  My bootloader is locked.

  The only method i Know is to downgrade to 4.0.2.A.0.42 or go to the ICS and root then it.

  is there another method?

  If I flash my rom downgrade/upgrade to level then I lose all my data/setings etc.?

  If so how all backup and restore?

  Please explain!

  Don't forget the rooting may void your warranty, and you do so at your own risk

  There are 2 methods, one you know and the other changes the nuclei.

  Download the rom 4.0.2.a.0.42 and flash only its core, then root using any method

  Then again, flash back, the core of 0.62 and you will have a rooted 0.62

  You know how the nuclei flashk and firmwares?

  Flash firmwares, see How Downgrade part and to see how Flash just the kernel, see how root 4.0.4

  
  

• HP pavilion dv6 7013 cl: with respect to PCI devices

  Dear Ms/Ms,

  Could you help me about 'PCI Devices', something wrong, that drivers exactly I should to install in pavilion dv6 7013 cl, I can't install this 'PCI Devices', it will be very useful if you will contact me. It says install but unsuccessful alwas after I updated, I have windows 7 Home premium 64-bit.

  Best regards

  Granite

  Hello

  You downgrade/upgrade the machine?

  For PCI, please try (card reader):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103897-1&cc=us&DLC=en&LC=en&OS=4063&product=5273523&sw_lang=

  and for USB:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_118744_1&sp4ts.Oid=5212935

  Kind regards.

• C20 TC6.0.1 update: fan fails test

  Hi all

  Anyone else have an indication of the failure of test tan on the homepage of the web on a codec C20 interface, updated since TC5 to TC6.0.1 freshly made?

  I mean on the system information page / general tab, Fans report 1 or 2 test failed on one or two fans. The error is not reported in the pages of diagnosis, but only on the system information.

  In addition, it is not systematic. We have 3 cases on about 15-20 codecs but it's worrying, the customer who fears for overheating.

  I have tried factory reset, downgrade/upgrade, but can recover a positive test of fan.

  Any help would be appreciated.

  Kind regards

  Guillaume

  Hello

  This looks like a cosmetic error as I can find it on many devices. but the absolutely perfect fucntions device

  It could be a sensor failure or could be a mistake.

  ambient up to 70-72 C shall be operable temperature if its goes beyond that, then it can be treated like overheating.

  You can check the actual temperature of the device in xstatus / / temp.

  If the peripheral rebootes after a long use could then be a problem that must be addressed.

  Thank you

  Ravi Kr.

• Cisco ACS 1113 v4.0.1.44 possibilities of reproduction have 1120 and 2nd 1113

  Hello

  We currently have 1 ACS SE 1113 running the 4.0.1.44 version that we are unable to take the Live service and we want to install a 2nd one for replication and resilience (and have the resilient pair running the 4.2.0.124 version).

  We had the following put at our disposal for this purpose an ACS SE 1113 and a CSACS 1120 times 4.2.0.124 the version currently running.

  Could you please tell if the following downgrade/upgrade process is valid (I see that the CSACS1120 does not suppot version 4.0 or 4.1).

  1. the downgrade 2nd ACS SE 1113 to version 4.0.1.44

  2. the replication between the 1113 establishment is so we now have our on-line data on both boxes.

  3. take the primary ACS out of service and confirm secondary now handles all requests.

  3. switch to level our primary ACS to version 4.1, then to the 4.2.0.124 version

  4. bring the ACS primary in-service and see works then take secondary ACS decommissioned for upgrade to version 4.1 and 4.2.0.124

  5 confirm replication now working at the 4.2.0124 version.

  Are there other methods possible to migrate our existing data directly from our existing of 1113 to one of the other devices (1113 and 1120) 4.2.0.124 running without going through the process of decommissioning/updated above.

  Thanks in advance for your help.

  Jim.

  Hi Jim,.

  I understand that you have 3 devices - 2 ACS ACS 1113 and 1120 1.

  ACS1 - 1113 4.0.1.44 - running in production.

  ACS2 - 1113 4.2.0.124 - lab running.

  ACS3 - 1120 4.2.0.124 - running in the laboratory.

  You want to configure the replication in the production environment and the transfer of the backup of the ACS1 to 4.2.0.124.

  The path mentioned in the post is correct.

  You can try to do the following:

  take backup of the ACS1. Install ACS for windows 4.0.1.44 in the laboratory. Restore the backup of the ACS1. Upgrade the windows of the ACS to 4.1.1.24 and then to 4.2.0.124 in maintaining the database.

  Restore the database on ACS2 and ACS3. Configure replication for ACS2 and ACS3.

  Take a time out and replace ACS1 with the pair of replication of ACS2 and ACS3.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this message as answered if you feel that your query is resolved. Note the useful messages.

• Update tasks prior to 11.5.9 - 11.5.10.2 #2 and #3

  I asked errors during execution of the tasks before update #2. This task was to apply AD Minipack I.2 (4337683), after much fumbling with the mistakes that I discovered that we currently Minipack I.5 installed (found by querying apps.fnd_product_installations). Is - this coverage since this set of patch requirement was later or should I downgrade/upgrade more?
  
  Second question:
  When we look at the application of step #3 patch 4104924 , it has been replaced several times. We are currently the patch in 5903765, which is listed as an update of 4104924 and 5473858, 6241631 and 3480000 (11.5.10.2 pack). 4104924 says that the most recent replacement for this patch is 8217898, however when watching our version the most recent replacement for this patch is listed as 6241631. Adjust the requirement and no amendment is required or as 3480000 Maintenance Pack is listed in the known patchsets to include or replace the list will it updated when I install that?
  
  Thank you for your help.

  Hello

  I asked errors during execution of the tasks before update #2. This task was to apply AD Minipack I.2 (4337683), after much fumbling with the mistakes that I discovered that we currently Minipack I.5 installed (found by querying apps.fnd_product_installations). Is - this coverage since this set of patch requirement was later or should I downgrade/upgrade more?

  You should be good as AD. I.5 contains all the fixes in previous announcement. I have patchsets. Please note that the last announcement. I have now, the Group of hotfixes available is 11i. AD. I.7 (7429271) and it is recommended that you apply this fix - see (Note: 233044.1 - on the Oracle Applications 11i DBA Minipack.) AD. (I) for more details.

  When you look at step #3 application of the hotfix 4104924, she has been replaced several times. We are currently the patch in 5903765, which is listed as an update of 4104924 and 5473858, 6241631 and 3480000 (11.5.10.2 pack). 4104924 says that the most recent replacement for this patch is 8217898, however when watching our version the most recent replacement for this patch is listed as 6241631. Adjust the requirement and no amendment is required or as 3480000 Maintenance Pack is listed in the known patchsets to include or replace the list will he refreshed when I install who?

  You can proceed with the patches current AutoConfig group that you are on (i.e. 6241631). However, it is strongly recommended that you have the latest patches AutoConfig Group (Patch 8217898: T2K AUTOCONFIG AND TEMPLATES CUMULATIVE HOTFIX T) applied this fix contains all the fixes that are included in the previous patchsets AutoConfig. So I would say that you apply the latest patch - see (Note: 165195.1 - AutoConfig helps manage the Configurations of system with the Oracle 11i Applications) for more details.

  Kind regards
  Hussein

• How to downgrade my iCloud upgrade? I need is no longer the additional storage space. I tried on my devices, but it still says that my current plan is 50 GB at $0.99

  I have tried to downgrade my storage in iCloud on my devices, but always says that I pay for $0.99 50 GB upgrade

  Is no longer need her so, how can I stop these payments?

  You can decrease the amount of storage by selecting a new plan directly from your iPhone, iPad, iPod, Mac or PC (for example, a plan of 5 GB to replace a 200 GB plan). The downgrade will take effect after the end of your monthly or annual subscription in progress.

  iOS

  1. If you use the iOS 8 or laters, go to settings > iCloud > storage. If you are using an older version of iOS, go to settings > iCloud > storage and backup.
  2. Click Change storage Plan.
  3. Press Downgrade Options and enter your Apple ID.
  4. Choose a different plan to use when the expiration of your current storage plan.
  5. Tap done.

  OS X

  1. Choose the Apple menu > System Preferences, and then click iCloud.
  2. Click on manage in the lower corner on the right.
  3. In the upper right corner, click Change storage Plan.
  4. Click Options to Downgrade.
  5. Enter your Apple ID password, then click on manage.
  6. Choose a different plan to use when the expiration of your current storage plan.
  7. Click done.

• last updated eliminates Easy Youtube Downloader which is ESSENTIAL for me why do you want to upgrade really a downgrade will you please fix so I have no

  I want to know why Mozilla would be, in effect, is last amount 'upgrade' to a downgrade... at least for me... and this is the reason - I downloaded Firefox 22 & now the Easy Youtube Downloader module is not compatible. For me, this add-on is ESSENTIAL. what I had to do, it was back to Firefox 21 & I also know of at least 10 others who were doing this for the same reason. I want to know is if and when this module will be available with the upgrade of version of Firefox. I prefer Firefox over any other browser & would HATE having spend as I used it for many years. How can I directly contact MF and ask them to email me or I would like to know if this module will be available or someone has contacts to MF which can let me know? Always also irritated as toolbar Google is not compatible and not for more than a year... just MF... you're going to lose customers!

  You want to try the version 6.9, posted yesterday with fixes for Firefox 22? This next version has not yet been fully reviewed, but it is available on the page "versions".

  https://addons.Mozilla.org/firefox/addon/easy-YouTube-video-downl-10137/versions/

  Note: I have not tried myself.

  To the topic of Google Toolbar, they supported more Firefox because then people will be more inclined to switch to Chrome.