EAS not recognizing Active Directory

Similar Questions

• Win 7 not recognizing active IPV6 when creating in homegroup

  Hello

  When I try to create a homegroup, Win 7 recognizes that IPV6 is enabled, even if the ownership of network adapter so that it is checked.  In other words, I keep getting an error message that tells me to enable IPV6, but it is already enabled.

  My Network (Realtek RTL8168c) drivers are up to date and my router (8855 DLink xtreme n duo) firmware is also updated.  I use a 12 GB Windstream DSL modem.

  Any ideas?

  This is a reply to another post that works:

  Here is that same procedure outlined more in detail by one of your customer support representatives:

  1. temporarily disable the firewall and third-party antivirus on the computer for a test.

  2. check that the competent services

  =========================

  a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.

  Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.

  b. right click on "Peer Networking Grouping" service and choose Properties.

  c. check if the service is started; If this isn't the case, please click on the Start button and see if it works.

  d. you can also choose automatic next to startup type.

  e. click OK.

  f. Please repeat the above steps with another service: PNRP Machine Name Publication Service.

  3 modify the key to register IPv6 to enable IPV6

  ==========================

  a. Click Start, type regedit in the search bar and then click regedit in the list programs.

  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters

  c. check whether the "DisabledComponents" registry key exists. If so, move on the next steps.

  d. double-click "DisabledComponents" registry key and change the value to 0.

  (If the key does not exist, please create the above key and assign a value of 0)

  e. exit the registry editor and then restart the computer.

  Thank you
  Gloria

• Not correct Active Directory domains

  Hello

  I use the plugin 13:04 on vCO 5.5.1.  When I run everything to create the workflow of the user, like create a user with a password in an ORGANIZATIONAL unit or to create a user with a password in a group, for example, if you look in ad the new user fields are not filled correctly.

  Example, the first name field is the name that I provided in the workflow.  The family name field is populated with the name of the account, I have provided.

  Any ideas on how to get this to work as expected?

  You cannot change the workflow library... instead, you create a new workflow that encapsulates the workflow library, add entries and additional workflow elements to perform the required task. In the workflow I have attached, that's what I did. I have card workflow library entries and then move the object of AD: User created as an attribute and then proceed in a Scriptable job that sets correctly the givenName, sn, etc...

• problem with DNS on the active directory server unique

  I have a client that I'm having a problem with DNS that they do not have active directory structure.  I tried just about everything and at my wits end.  Customers can get online, but the problem is that they cannot see the DNS.  Any help would be much appreciated.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Client pix VPN how to authenticate with Active Directory

  Hi all, I've just set up my first Client VPN on a Cisco PIX. Everything works very well so that hitting the correct subnet and logon. However, I would like to see how I can get my connection of remote users with there active directory accounts. Right now I use the local connection for the pix for testing purposes. Sounds easy, but I'm missing something

  We use:

  Cisco Pix 515E version 6.3 (3)

  Thank you

  Dan

  Unfortunately the PIX 6.3.3 version does not support Active Directory authentication. V6.3.3 PIX only supports authentication to the server database, radius, and Ganymede local PIX.

  If you want to authenticate to active directory, it is support for PIX v7.x go.

  Here are the different types of authentication support for PIX v7.x leave for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa70/configuration/guide/AAA.html

  Hope that answers your question.

• ESX - integration with Active Directory: Kerberos?

  Hi all

  We set up the integration of ads for SSH on ESX 3.5 U3 accounts.

  esxcfg-auth - enablead works very well:

  esxcfg-auth - enablead - addomain = our.domain.com - addc = our.domain.com

  For some reason, there was already an additional line in the configuration script: esxcfg-auth - enablekrb5

  esxcfg-auth--enablekrb5--krb5realm=our.domain.com--krb5kdc=our.domain.com--krb5adminserver=our.domain.com

  Things go awry as soon as the last command entered.

  When you add a local account with this powershell command, we get this error:

  New-VMHostAccount: 12/05/2009-10:17:11 new-VMHostAccount 52976ebb - 2 d 24

  -f493-9aa3-bca7894ef581 a general error has occurred: passwd: Authenticate

  mishandling symbolic ion

  The local account is created, but the equivalent of Active Directory gets locked out, after several of these events:

  Failed prior authentication

  User name: USER-TEST

  ID: DOMAIN\TEST-USER

  Service name: kadmin/changepw

  Pre-authentication type: 0x0

  Error code: 0 x 19

  Customer's address: 10.10.120.16

  Now, I have two questions for you:

  1 - does anyone how to solve the problem of blocking

  2 East - -enablekrb5 necessary? What gives me extra in addition to enablead-

  Thanks for your help!

  Kind regards

  Harold

  enablekrb5 is not necessary.  The enablead will set up your kerberos configuration to talk to ad.  the krb5 option is used when you use a KDC that does not have active directory.  In addition, when you create an account on the side ESX, it's pretty much an account without password.  At least no password in UNIX file perspective shadow.  Authentication works by checking the files local to the user name (since the announcement does not serve for the Pb of the user, only authentication), then check the password in the local files, which do not have a password, so failure, and continuing to the announcement through kerberos, for a successful verification.  If you try to create an account with a password on the ESX system, then this is the problem.  You don't need to put it, in fact, it must be without password, so without posting, the user can connect to the system via ssh not effectively or console.

  -KjB

  VMware vExpert

• Active Directory users & computers does not open in MS Server 2003 Enterprise 64-bit?

  Hello

  Active Directory users & computers does not open in MS Server 2003 Enterprise 64-bit?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Server 2008 R2 Active Directory Certificate Services does not start

  Hello

  I had a power failure on both of my units of WD Sentinel DX4000 running Windows Server 2008 r2. Come to fine and checked the integrity but now a unit gives me an error and does not start the Active Directory Certificate Services. I checked google and read where I need to run the eseutil.exe on the CA database, but discovered that utility is provided only with the server Exchange that I'm not running. Is there another utility that allows you to defragment and correct the Microsoft database. Here is the error I get when you try to start it:

  Log name: Application
  Source: Microsoft-Windows-CertificationAuthority
  Date: 28/07/2014 06:01:39
  Event ID: 17
  Task category: no
  Level: error
  Keywords: Classic
  User: SYSTEM
  Computer: WDOffice
  Description:
  Certificate Services Active Directory did not start: could not initialize the connection of database for WDOFFICE-CA.  Error 0xc8000147 (SEE:-327).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      17
      0
      2
      0
      0
      0 x 80000000000000
     
      40337
     
     
      Application
      WDOffice
     
   
   
      WDOFFICE-CA
      Error 0xc8000147 (ESE:-327)
   
  

  Any help would be greatly appreciated,

  Thank you

  Bob

  BBob

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/

• I did a server active directory, but I don't give him a password during the installation. Now, it does not clean. Why?

  on acyive directory

  Hello. I did a server active directory. but I do not give a password when installing it. now it own dosenot. Why dosenot it clean from my system?

  Thank you very much for your efforts.

  Hello

  I suggest you to send your query to the Technet Forum for better support.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Printing problems, when I go to search for a printer in windows, it says domain services active directory is not available

  My printer does not print. I rebooted the printer, but I still can't get it to work. When I go to search for a printer in windows, it tells the domain services active directory is not available.

  Hello

  1. is the computer connected to the domain?

  2 did you change on your computer?

  3. What is the brand and model of the printer number?

  4. is this a network or connected via USB printer

  Method 1:

  I suggest you follow the link and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  I also suggest you to follow the link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

• Active directory domain services is not available. -What it means and how to fix it?

  When I try to print something I get an error message stating, "Active directory domain services is not available.

  Hello

  Your question would be better suited in a crowd of professionals IT at Technet-Directory Services. Please repost your question here for learn more concentrated help.

• Active Directory domain services is not available. How can I recover it back on line

  Dear all,

  I did a format on my drive and after that I installed Vista Business and office 2007. I installed a local and a net printer and everything was perfect until I went looking in the file to find in print a 2007 office file options. The message was "the Active Directory Domain Services is not available. I red how to get back to the work of the administrative tools but I cannot fins it it. In my view, which is simply stopped working. Can someone tell me can hoe I can put it back to work. It seems that it is a lttle lazy and want back tay and relax.

  Best regards and thanks for your time.

  Christos.

  Hey Christos,

  Your question of Windows is more complex than what is generally answered in the answers from Microsoft Windows Vista forums. It is better suited for the IT Pro TechNet public. Please ask a question in theTechNet Forums.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Active Directory Domain Services are not available

  Can't use my printer. I get message 'no printer not installed' even if it has been working fine for months. When I click on the printer I get the message "Active Directory Domain Services unavailable" if I go to the devices & Printers and right click on the default printer (with the green check mark), then choose 'Printer properties' I can click on 'Print Page of Test' and he does! Unable to print anything at all in word. I use Windows 7 Home Premium. Any help would be appreciated.

  Your PC is actually on a network?

  Sometimes its necessary to unplug the printer, uninstall all printer from Add/Remove software, and then reinstall the printer according to the instructions of the manufacturers

• Why do I get an error message "Active Directory Domain Services unavailable" when I'm not connected to a server?

  I have 2 computers running under that Windows 7 Ultimate SP1 connected to a modem-router D-Link. I have defined a collective dwelling and have attached my HP Officejet 4500 printer to the router.

  At the office on both computers, when I click on "Find a printer" in the window of the printer, I get the error "Active Directory Domain Services unavailable. Do not understand why this error exists, since I do not have any field. There is no server on the network.

  Hello Chaim,

  Thanks for posting your query inMicrosoft community.

  I understand that you have a guest of error as you try to find the printer. So, please try to follow the following suggestions to solve the problem.

   
  Method 1: First of all, try to update the printer driver which might help you resolve the issue. Click on the link below for more information on the updated printer drivers.
  
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Additional information:
   
  Please refer to suggestions provided by Adam_W_ responded on May 28, 2010
  http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/clicking-find-printer-shows-error-the-active/52bfd961-ff62-4397-b8cf-a0708f0cb3d2.
  
  I hope this helps. Otherwise, please respond to this answer and we will be happy to help you again.

  Thank you