EasyTab labels & contextual text appearing not

Similar Questions

• iMessages and texts appear not on all devices.

  I have a MacBook (2015 edition) an Apple Watch and an iPhone 6 more. The Mac running OS X El Capitan version 10.11.5.  The Watch works OS 2.2.1. My iPhone is running iOS 9.3.2. Text messages and iMessages do not display the entire conversation on each device. I can see what the sender, but it does not show my answers, even if the sender receives answers. I tested the message function by sending me a message, and I have not received a response.

  I chatted with Support from Apple, took all three devices in an Apple Store and talked to a technician, a senior technical and obtained a reference to an engineer. We can't solve this problem.

  All devices have been reset again. I signed repeatedly. All the Ts were crossed and nothing seems to fix this.

  I noticed that when I tried to turn the text transfer function, no verification code appeared on my MacBook, but it has never been a problem before, when it was not lit. I think that the fact that the dialog is the result of this problem, but I don't think that it is the cause.

  Can someone help me please!

  Please turn the phone off, or put it in airplane mode. IMessage now works on Mac?

• Text appears not

  My text file will not appear because there must be on Level0
  
  loadVariablesNum ("plbio.txt", 0);
  
  The second swf file I don't know how to put this issue to a level
  
  on (release) {}
  loadMovie ("plbio.swf", "space");
  setProperty ("area", FLF, "-454");
  setProperty ("area", _x, "-30");
  }
  
  If I put the text on Level0, the swf remove it the main.swf.
  
  Can someone help me please?
  
  Thank you

  My text file will not appear because there must be on Level0

  loadVariablesNum ("plbio.txt", 0);

  The second swf file I don't know how to put this issue to a level

  on (release) {}
  loadMovie ("plbio.swf", "space");
  setProperty ("area", FLF, "-454");
  setProperty ("area", _x, "-30");
  }

  If I put the text on Level0, the swf remove it the main.swf.

  Can someone help me please?

  Thank you

• messages text appears not the conversation list.

  I was remove some older posts today and since then when I get them I have to search the name of the contact to find the message. Before, I had not deleted all text messages would remain in the main list of conversation. Now he comes and tells me that my list is empty. Is this a bug or something I did accidentally?

  New update just released 1.3.5 should correct this problem. Since the release notes

  Messaging

  • If a user deletes a conversation with a contact, new conversations with this contact now display correctly in the Conversations view.

• text appear not to when you use a link to the Web site

  Hey there who began to read.

  This question has noticed on various Web sites, I did with muse. When I use a link to the text of the Web site (e.g. facebook or other) is not displayed. I don't have the question within the site only from external sites. http://www.rikbeuselinck.be/Galleria-360-Firenze.html

  Is it possible that typekit fonts are does not load properly? It's really annoying and I don't know if other people have the same problems with my sites.

  Thanks for the reply

  What you are probably having is a bug with Chrome 33. See this thread - http://forums.adobe.com/message/6157419.

  We also have a work around for this - http://muse.adobe.com/exchange-library/chrome-33-webfont-workaround-1

  Thank you

  Sanjit

• My girl texts do not appear on my Mac

  My girl texts do not appear on my Mac, but do for my granddaughters.

  They all show up on my phone.    We all iPhones, and texts will all their phone numbers.   Contacts displays all phones like the iPhone.

  When I send a text from my Mac to my daughter, I get "Not delivered", but clicking on, all get is the opportunity to try again.

  Today I got a text from my girl - since I'm at home, I didn't try to type on the keyboard of my phone, so I tried to text her back to my Mac.   It didn't, so I sent a text to one of my granddaughters.  This text appeared in the application of the text on my iPhone and my iPad as sent by me.

  My last text of my daughter on my phone is today.   February was my last my daughter on my iPad and Mac text.

  How can I determine why texting to these members of the family work differently?

  They are all my current operating system.

  Have a look hereand look at useful answers. It might solve your problem.

• Mail application does not display photos - it just says: photos, but the text does not appear, how to correct?

  Separated from this thread.

  My operating system is windows 8.1 - when using the mail application the photos appear not - it just says: photos, but the text appears. Photos open in Outlook. Can you help me?

  John

  Hi John,.

  You might face this problem when the mail application is damaged or if it has a license problem. I suggest you to run the utility troubleshooting App from the link below. Click on the resolution of the problems of the App and run it. Check the question, if you are still having the same problem as you can follow the other steps in the link below and check if it helps.

  Solve problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Let us know the status of the issue.

• To create a text box with a colored background but the text didn't appear not

  I'm doing a map of color-coding. It's just a black and white base card, but I filled in the cities with different colors using the paint bucket tool, to show which region they belong to.

  At the bottom of the map is a list of five regional offices and the offices of the area covered by each of them. I was hoping to create a box around the text, and then fill it (the box) with the color that corresponds to that particular region.

  Using the rectangle selection tool, I call a box around the text and filled with color. The opacity is set to 100%, so the text behind it disappeared completely. If I reduce the opacity of the text appears in grey, but I want the text to stand out and to be black.

  Using the Horizontal type tool I tried to redo the text everywhere again. However, the text I typed (see the text layer name) was not appear.

  Then I went in the character window and clicked rest character, hoping that the text arise, but it still does not work. The blue fill layer covers the original text, but is there a way to keep this original text, always be black, in order to keep the blue background? Or redo the entire text again in a new layer (as I tried to do below) would make more sense?

  

  Change the blending mode of the layer of color, darker color should work well.

• Text appears (at random) to Saba, not seen in the slide in the project or in the display film (Version of Captivate 9.0.1.320)

  First report was some text on the button, the shape's text, standard text boxes were not appearing on some slides to SABA. Investigate this, when I open the captivate file I see lack of text on several slides and views of the film. When I click on physically on the text box, shape, or the button on the slide, or in the timeline panel, they appear. I save and close the project. reopen the project itself and the text is not there.

  Here is a screenshot.  You can see that there should be a lot of text on this slide but none shows in these two places. Someone at - he seen this before?

  

  Ok.  Well, if your project has become corrupted, that would seem so, a solution is to try to hide groups of slides and republication to see if you can solve the problem in this way.  If you can, it means that corruption is limited to these slides hidden away somewhere. Then you can refine it further.

  You can also try to copy all the slides on to a new project of the same size file.

  Sometimes, that will remove corruption because it forces Captivate to rename all objects.

  However, if this does not work, you need to think to rebuild from scratch.

• I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  Hi robinm6200,

  Make sure that you have selected 'Document and annotations' under 'Comments and forms' when printing.

  

  Kind regards

  Nicos

• Text PDF format appears not, cannot save changes

  I tried to understand how being saved text format appears when you open a PDF form.

  I did a lot of troubleshooting and here is what I have so far.

  PDF - form has been created in Adobe InDesign CS6 (Mac)

  -The text appears in SumatraPDF, Mozilla's PDF reader

  -The text is visible for half a second then disappears when opening in Adobe Reader 11 and cannot be seen (even when the cell is clicked, as others have pointed out)

  -Same thing happens in Adobe Acrobat 9.0 Standard except that it is rather the second 1/8

  -The text does appear quite in FoxIt Reader, Nitro Pro 9, Nitro Reader 9

  -In addition, if the user tries to open, to modify fields, record, none of the changes stick

  It seems that any reader/PDF Editor that supports editing of form field does not display text, but who does not display the text just fine (Mozilla, SumatraPDF). I tried to add the ".js file" for fixing forms Adobe Acrobat and Reader, but it makes no changes. I am troubleshooting for an end-user who must be able to open, edit and save these PDF files. No indication as to what is happening here would be greatly appreciated!

  Thank you!

  The reason is that the form is reset when the document is opened. I could be to blame for this, I promoted this technique long ago before the player was able to save a completed form. It was useful for online forms so that historical data would not fill in the fields if the form had been reopened. For a number of reasons, is no longer a good reason to do so.

  To work around the problem, you can temporarily disable JavaScript and form don't get reset when it is open. You can also remove the script in the opening event of the Page the first page if you wish.

  The reason why you see different behavior with different viewers is because some of them support the JavaScript that is used and others do not.

• Text captions appear not to when you view classes in the browser or exe editing.

  I've timed certain text captions to show at some point in my demonstration. They show when previewing in Captivate, but not in the browser or when published as a .exe. They have worked in the past, and they are working on slides, but not all. It is a long course created by me, so that I reuse a lot of objects and for some reason it won't display the caption of text on some slides when in fact the course.

  The properties to ensure that they are visible and that there is no transition, the legend is on the top layer as well.  I honestly don't know what can disable captions of text appearing on some slides.

  Thank you for you support!

  M

  You have an interactive object to the beginning of this slide which is pausing the slide before your legend should appear.  This is probably why it is not executing.  The blade is paused.

• Flash cs6 text does not appear.

  Hello

  I just opened flash cs6 and discovered that the text tool does not work well.  It allows me to select the tool and place a text box, but the text does not appear.  It's too much space in the text box, but I can't.  The alpha is already at 100%, I don't know what is happening.

  Hi all

  Please read this technical note for more information on how this problem can be solved.

  Kind regards

  Suhas Yan

• Text will not appear

  I just bought CS5.5 and in photoshop the text does not appear after I created a transparent banner and try to use the text tool. I tried the reset tool and reset preferences such as recommended online. The tool worked well last week.

  Thank you for responding to this post. I thought about it after much head-banging. The size of the box has been mysteriously inches instead of pixels.

• Any Composition AE (dynamic links) and a text does not appear in the first (CS4)

  I have an AE comp I did with a few credits a few weeks which was 20 seconds ago. Now, I go back to edit it - done long 52 seconds (Comp changed settings), I increased the length of each text box appears a little longer; then I also copy & paste a text layer and put it between the 2nd to last and the last layer of text.

  Then I go and copy/paste about five more layers that all go behind what I had before - in my AE comp I also put the other. I edited all the layers of copied text and type in all that much good.

  I have a background with text on top of that. The background is precomposed and then all text layers in the final composition.

  When I go to the first I see * some * of the changes immediately.

  When I go to the for first now to watch, all changes are applied until the last layer of text I've had since a few weeks ago - including all changes made to these layers as length, font and size, as well as the text layer, I put between the last and the 2nd to the last layer.

  But that's it - once the last layer before is played, no layers of text appear, but the background is perfectly well yet, everything as it should.

  In AE, it plays well and looks great.

  What I am doing wrong? How can show in AE but not first - if the background shows?

  I went to the AE and has one of the layers of this latter text to see what he would do in the body and he hid the background well, but the text still does not appear in the body but in AE.

  Police is still - Adobe Caslon Pro

  My system:

  Windows 7 Pro (64 bit)

  Intel Core i7 980 X 3.33 GHz

  Drive system 750Go

  2 TB disk Media

  12 GB memory

  GeForce GTX 470

  Running Adobe Production Premium CS4

  AE version 9.0.3.8

  Body version 4.2.1

  Any idea would be appreciated!

  Thank you!

  Delmar Penner wrote:

  I changed it to the 3D and moved a few around closer - watched from top, right, left, back... Yes, all the different points of view and could not see anything wrong.

  In fact, the need to use the 3D is not very apparent in this model.  I would use 3D unless there was a reason to do so.

  Delmar Penner wrote:

  ... everything up to "Other credits" do not appear...  I noticed that there is the kind of grid with the blue symbol just in front where I name the layers - what does it means? It's all those who do not have their appearance... Any connection?

  Indeed it is!  Did you by mistake guide layers, not the text layers.  Here is their description:

  http://help.Adobe.com/en_US/AfterEffects/CS/using/WS3878526689cb91655866c1103906c6dea-7e76 a.html

  .. .and here is more about them:

  http://community.Adobe.com/help/search.html?q=guide%20layer&HL=en_US&LR=en_US&l=AfterEffec ts_product_adobelr & site = aftereffects_cs5_all & auto = 1 & Filter = 0