iMessages and texts appear not on all devices.

Similar Questions

• My imessage and facetime will not work correctly

  A few days ago my iMessage suddenly wasn't working properly on my mac. I could not receive messages, and when I tried to sent messages, he says not delivered. Then I reinstalled the OS X IS captain.

  Then when I type a contact to send an iMessage from my mac, it turns red and said "message could not be sent, contact is not registered with iMessage. I am very sure that the contacts I want to send messages using iMessage.

  I tried all the methods on the internet or the apple support, I contacted before, as sign and disconnect my apple on iMessage ID, or restart and set a safe mode, or remove the com.apple.ichat.plist and relaunch the app iMessage. All methods do not work. My iMessage application still have the problem.

  Furthermore, I signed in my own apple on my friend's mac ID and test, iMessage work perfectly. So I'm very sure that the problems come from my mac, not my ID apple or something else.

  who can help me?

  Please take each of the following steps that you have not already tried it. Stop when the problem is resolved.

  1. open the Messages preferences window, then select the tab accounts. On the left is a list of e-mail accounts that you have defined. Select iMessage. Make sure that the shown Apple ID is valid. If this is the case, check the box marked

  Activate this account

  If it is not already done.

  2. disconnect iMessage on all your devices and reconnect. If you have activated the two-step verification for the Apple ID you use with iMessage, you must generate a password specific to the application and enter when you are prompted. Test.

  Note: iMessage and iCloud are not the same, even if you use the same Apple ID for both. You need to disconnect from the iMessage, not iCloud.

  3. take this step if you have an iPhone the same Apple ID in Mac-related.

  Follow the support article, under the heading

  Set up SMS and MMS with continuity

  If the text transfer is already activated on the phone, turn it off, then turn it back on.

  Quit and restart the application Messages on Mac.

  Credit for this observation to members of ASC Apple lawyer.

  4. it may be a problem with the Apple ID account, even if it works on another device.

  Click on the help link at the top of this page to schedule a call of Support from Apple. You might not be charged for the call if you select "Apple ID" - not the model of equipment - as the product you request in connection.

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• It began to appear in the first inch of each merchant site I visit with the new version, "Congratulations!" Every $5 spent at JCPenney saves you a chance to win a $500 gift card. I have run scans and nothing appears not infected, but I do not understand t

  It began to appear in the first inch of each merchant site I visit with the new version, "Congratulations!" Every $5 spent at JCPenney saves you a chance to win a $500 gift card. I have run scans and nothing appears not infected, but I don't get that annoying block in Internet Explorer. I uninstalled and reinstalled firefox and when I did, the first thing is present at his inauguration was a message that says: "you have joined the shop now...". "something or another and I had to click OK, it was a microsoft OK message. How can I get rid of this?

  URL of affected sites

  http://www.BestBuy.com, target.com, any site of retail trade

  Your problem can be caused by Malware. You can run and update according to free anti-virus software:

  1. Malwarebytes (free version) - http://www.malwarebytes.org

  2. Spybot Search & Destroy - http://www.safer-networking.org

  3. Spyware Terminator - http://www.spywareterminator.com

  In addition, there are a number of forums, you can use to help get rid you of your infection. It is:

  • Bleeping Computer
  • Safer-Networking Forums
  • Spyware Warrior forums
  • SpywareInfo Forums

• I installed MSN messenger on my android tablet, nobody seems to have my emails and messenger does not at all.

  help Windows live and andeoid

  I installed MSN messenger on my android tablet, nobody seems to have my emails and messenger does not at all. On my end, my status is online. The person I am trying to contact me can not see, and it does not show them as being online on my end. I know because I was in the same room.

  do I have to create a hotmail address separate regarding when I downloaded windows live I used one other gmail account while I need hepatitis

  Hello rickdebattista,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I bought a computer from a business and it came not with all drives.

  Original title: I bought a computer and it came not with all drives.

  I bought a computer from a business, and it was a computer on the network. It came not with all drives. Is it possible to reformat the system with out having to re - buy windows xp or office? Can I get copies of XP and Office? I still have the XP sticker with the computer.

  If they don't give you the disks, all you need is a boat anchor. Ask them to give you the disks and product keys. Otherwise, you will need to buy.

• Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  What exact version of After Effects you are trying to use? 13.7.1 is?

• My creative cloud adobe is grayed out and it will not update all apps he hust has a blue circle spinning whe I click Open. It won't let me uninstall as well. What should I do?

  and it will not update all apps he hust has a spinning circle blue whe I click Open. It won't let me uninstall as well. What should I do?

  Do you use Windows or Mac computer?

  You can try to uninstall using the uninstaller CC:

  https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

• My 10 photoshop element stop working, I'm not able to open it more.  ?  I posted this question a few days ago and I did not get all yer anwer, please help

  My 10 photoshop element stop working, I'm not able to open it more.  ?  I posted this question a few days ago and I did not get all yer anwer, please help

  I have photoshop editor item 10 and organizer first and I have a Macbook pro 10,9,9

  When I try to open an image with the Publisher of the item or if I try to open the PS Editor directly I see this

  file:///users/main/desktop/screen%20Shot%202014-11-26%20at%201.17.35%20PM.PNG

  When I click on edit it does not open and I have this window

  file:///users/main/desktop/screen%20Shot%202014-11-26%20at%201.21.07%20PM.PNG

  and if I click on REOPEN, I still got the same message

  Lucie

• 9.2.1 iOS imessages and texts was completely broken

  I left my 5s update iphone to ios 9.2.1 while I was sleeping. This morning I can't send messages or texts. However, I can receive. I tried to restart the phone and reset the network information.

  Hi, dtm33.

  Please visit Apple support communities.

  I understand that you are unable to send iMessages or text through the messaging app.  Because your iPhone is restarted or reset the network settings has not resolved the problem, try all other troubleshooting steps in the article below.

  If you can't send or receive messages on your iPhone, iPad or iPod touch

  See you soon

• EasyTab labels & contextual text appearing not

  I just filed an application developed with CVI 6.0 on to CVI 9.0 and I'm under problems with labels not showing upward when ran on the system target (XP Embedded).  I've learned since I need to select the 'Western Character Set' for each control in order for the label appears correctly.  I solved the problems for all controls in the GUI editor.  I always have problems with the text does not arise for the control labels Easytab and pop-up windows.  I searched the CVI API and passed the Easytab FP but I can't find anything that would allow me to set the character set for these controls.

  Does anyone have a solution for this problem?

  Thank you.

  I solved the problem simply by going in regional & Language Options Advanced and passed to the English (United Kingdom), then back to English (United States) and that some how solve my problems.

• BlackBerry Q5 [help] password entry box appearing NOT at all.

  Actual box to type the password just will not be displayed. My phone cannot be reactivated on my slide the screen up. Everything shows to the top, the noticications of time, emails and text, but when I slide the screen up all the way, I find myself with a gray background and the black bar running through the top of the screen. I had a password on my phone for over 3 months and have not turned off.

  I can't reboot my phone because the power button is broken and so eager glue... meaning that he goes on / off power continuously for hours until I have it move out of place.

  Is it possible to fix this, other that the... wait a full 24 hours, no doubt, since I've just loaded my phone, for the battery to die?

  NotApplicable wrote:

  I can't reboot my phone because the power button is broken and so eager glue... meaning that he goes on / off power continuously for hours until I have it move out of place.

  Is it possible to fix this, other than the wait...

  Restart: With the phone smart BlackBerry turned on, using the keys of volume of the edge side, press on and hold the keys of volume for about 20 seconds and both of the Up, ignoring the initial message of screenshot... the screen go black, reboot.

  Try and see if the password screen you then appear correctly.

• BlackBerry smartphone app error 603 and BBDS does not recognize my device

  Here's the situation: the battery ran out on my unit earlier this week. When I started to charge, the unit will start automatically restart. Before restarting, the messages "error app 603' and 'reset' appeared. If I click "reset", the whole process starts again.

  The previous messages in the forum I read about 'error app 603' suggested I should restore the device settings or reinstall the operating system. I tried to connect my device to my laptop via USB cable, however the computer will only recognize the connected device with a chime at the beginning of the discount to zero, followed quickly by a chime of disconnection being rebooted. The computer or software Deskstop BlackBerry recognizes the device while it is stuck on the '603 error message' app.

  What else can I try?

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000023951&language=English

  For the charging of the OS, you can better use this method... on a PC (you can't do this on MAC):

  (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. Sorry, already a moot point counts with the error.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  (6) work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of step 6, your BB presents "507" error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Password MS Surface has been lost/changed and now can not access the device.

  My wife recently got a tablet of Ms Surface.  Initially, she set his password and was able to use the device without problem.  However, after 2 days of used light, the device does not recognize the password and don't let her diary.  How can solve us this problem so that it can reset his password and access?

  Mario - Sorry for my delay in responding, but I need to retrieve the response that we had found.

  Surface of my wife would not accept his password and if it could not connect to use most of the suggested solutions to 'reset' a password.  We had to do a complete Factory reset by following the following steps (that I found on the Web, and successful):

  The only way to start a complete RESET without signing in Windows is to stop start Windows handle once or twice to get "Automatic Windows repair" to start, as follows:

  1. turn off the device in now the power button for 6-10 seconds

  2. press the power button to wake it up.

  3. once the Surface Logo appears, wait for the indirect "dots" approach to appear and then press and hold the power button for 6-10 seconds to turn the unit off again.

  4. Repeat step 2 & 3 until the Surface Logo appears with the words in saying "prepare auto repair.

  5 recovery Mode turns on.

  6. in the BITLOCKER screen, press "skip this drive".

  7. press on 'Advanced Options '.

  8. press on "Troubleshoot".

  9. press "reset".

  10 tap... "Just remove my files.

  11 reset process will take about 20-30 minutes - and all DATA WILL BE REMOVED FROM the DEVICE.

  When the "reset" process is complete, the OOBE/Start Up Wizard must begin and the customer can complete the installation of their Surface device.

  Please note that we have used this process because
  (1) we could not connect you to the Surface unit AND
  (2) because we had no personal data to save.  If you have any personal data that you don't want to lose, you will need to find another way to reset the Surface.

  I hope this helps.  He has worked for our situation and the Surface continued to operate perfectly since.

  Doug

  PS: Here is the link to the site where this info was initially.
  http://Forum.TabletPCReview.com/Microsoft/53597-unable-reset-refresh-surface-RT.html

  It can also provide answers on other issues with the RT of Surface.