EBS oraInventory
Hi all
All versions
Should I back up the contents of oraInventory?
If our disk crashed and I only restore the backup of our app & db. Is it OK if I create the oraInventory empty folder without the previous content?
Thank you very much
JC
Hello
Yes oraInventory backup is good but not required. If you restore your Oracle Home, then you will need to re-create your stocks for ORACLE_HOME and based on different versions there are different ways to regenerate and to register for ORACLE_ 'HOME in the inventory.
Just search for "how to register host Oracle in intentory:
concerning
Pravin
Tags: Oracle Applications
Similar Questions
-
Hello
Is R12.2 of EBS. few support Linux 32 software?
Thank you
Jeremy
The 'rapidwiz' completed successfully.
In fact, we have problem "oraInventory.
Before,
$ cat /etc/oraInst.loc
inventory_loc = /oracle/u01/archr12
We have created the inventory as directory below, after this completed "rapidwiz"
$ cat /etc/oraInst.loc
inventory_loc = /u01/oracle/oraInventory
Q > is required to give the name of inventory as "oraInventory?
We have stocks pending 11i like below,
$ cat /etc/oraInst.loc
inventory_loc = / u01/oracle
Thank you
Jeremy
-
I'm following the installation for EBS 12 on an instance of OEL 7 documentation.
I ran with success the buildStage.sh, create the directory that contains the/internship/EBSInstallMedia/internship/TechInstallMedia/internship/TechPatches and/internship/startCD
He said before running rapidwiz
---------------------------------------------
Check oraInst.loc exist in the directory appropriate for your platform:
Platform
oraInst.loc location
Linux x 86-64 etc/etc/etc
Confirm that the content of the oraInst.loc look like this:
inventory_loc = / oracle/oraInventory
where/oracle/oraInventory points to the directory where the Central your inventory is. This location must be writable by the user account which must Run install fast.
------------------------------------------------
I did intermediate step without problem, but I don't know what is 'central inventory' refers to. The disc "startCD? The parent directory where the TechInstallMedia EBSInstallMedia, TechPatches, unzipped directories are?
In addition, the instructions say:
The central location of the inventory must be identified by the
/Oracle/oraInventory.loc file
Who has pointed to by the /etc/oraInst.loc file?
Which contain materials that are similar to the
inventory_loc = / oracle/oraInventory
So, I guess, in this example, the/oracle/oraInventory DIRECTORY contains the file oraInventory.loc (or is it typo and should the content says "inventory_loc=/oracle/oraInventory.loc".
All this is academic, because my find in my entire system command fails to reveal any oraInventory.loc file.
I followed the 122install.pdf.
There is not an oraInventory.loc file.
What you need to do is the following:
-Choose any directory where you want to have your oraInventory and create it manually - for example "mkdir/u01/oracle/oraInventory" and make sure it is writable
-Manually create the file /etc/oraInst.loc-"touch /etc/oraInst.loc".
-Edit "/ etc/oraInst.loc ' to have a point to your oraInventory-'vi /etc/oraInst.loc' and add this line-->>" inventory_loc = / u01/oracle/oraInventory.
When you run Rapidwiz it will read /etc/oraInst.loc to find oraInventory pointer (which is ' / u01/oracle/oraInventory "in this example) and the Installer stores the info here.
The foregoing is explained (Doc ID 1320300.1) under "Verify 1.6 oraInst.loc (UNIX only)".
Thank you
Hussein
-
Oracle EBS 12.2.5 on redhat 7
Hello
Did anyone installed Oracle EBS 12.2.5 on redhat 7 yet?
I use a directory of scene with startcd version 50
I'm trying, but installation fails with
Exception string: error in invoking target 'install' of makefile ' / oracle1/VIS/fs2/FMW_Home/webtier/webcache/lib/ins_calypso.mk'. See ' / oracle/oraInventory/logs/install2015-11-04_04-23-07PM.log' for details.
The installation fails to/oracle/soft/ebs/TechInstallMedia/ohs11117/Disk1/runInstaller - waitForCompletion - ignoreSysPrereqs - force - silent - responsefile /oracle1/VIS/fs2/inst/apps/VIS_svlirc21/temp/cfgHome/response/APPS_OHS_HOME/txkOHS_11117.rsp
All prerequisitis in DOC ID 1330701.1 are ok
Thanks for the help
You're in for a lot of pain! The webtier components delivered with EBS do compilation/installation on RH7.x without a bit of hacking.
If you want to try, you can work around this error by updating sysliblist
for example:
sed-i of /-ldl - lm - lpthread - c - lirc - lipgo / - ldl - lm - lpthread - c - lirc - lipgo-ldms2 - lrt/g ' sysliblist
But you will hit the next mistake after that...
-
EBS R12.2.4 apps error level cloning
Hi all
EBS 12.2.4
OEL 6.5
I cloned the orauat db level successfully.
And then I start cloning on the layer of appluat apps, but the clone process cannot connect to the database
Inventory global loc = /etc/oraInst.loc
Journal: /home/oraInventory/logs/install2013-08-08_11-54-53AM.log
contextFile:/home/appluat/UAT/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check the name: CertifiedVersions
Check the Description: it is a precondition to check whether or not the Oracle software is certified on the current o/s.
Expected result: one of the redhat-6,oracle-6,oracle-5.6,oracle-5.7,oracle-5.8,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual result: oracle and Oracle
Full version. The result of this review is: failure of < < < <
I remember I met this before, I edit a file to force it to check oel 6.6
But I do not remember the file.
Please help how to solve this error
Thank you very much
JC
I solved this problem
-
Cloning of EBS R12.2.4
Hi all
EBS R12.2.4
RHEL 6.5
I always get error when cloning time 2 CRP in the same server instance due to duplicate exist in the OraInventory folder.
How to avoid it? My solution is to manually delete the entries in the xml file that is pretty hard to do because you might accidentally delete the wrong pairs of lines.
Can I use the deregistration of control?
For example:
If none of the mentions above Oracle Home are already enrolled in the Oracle inventory, you can run the following command to unregister or detach that Oracle Home:
$ cd /u02/r122/fs1/FMW_Home/oracle_common/oui/bin
$ ./runInstaller -detachhome
\ORACLE_HOME=/s0/r122/at1/FMW_Home/oracle_common
Thank you
Yes. This is the correct procedure.
CD $ORACLE_HOME/Yes/bin
. "/ runInstaller-silent - ORACLE_HOME = detachHome"
"ORACLE_HOME_NAME =" " Take a look on
R12.2: How to create, update or rebuild the inventory Central for Oracle Applications E-Business Suite? (Doc ID 1588609.1)
-
Hi all
EBS R12.2
RHEL 6.6
I am cloning our R12.2 EBS on RHEL 6.6
Inventory global loc = /etc/oraInst.loc
Journal: /u01/oraInventory/logs/install2015-05-23_04-13-51AM.log
contextFile:/u01/appvis/VIS/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check the name: CertifiedVersions
Check the Description: it is a precondition to check whether or not the Oracle software is certified on the current o/s.
Expected result: one of the oracle-6,oracle-5.8,oracle-5.7,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual result: redhat 6, 6
Full version. The result of this review is: failure of < < < <
But it will not pass the validation prior becase RHEL 6.6 is not in the list. How can I add this version?
I know that I have done before, but I forgot the file to edit
Help, please...
Thank you very much
Maria
Hi Bashar and all,
Problem solved by keeping at least a line PACKAGE which is valid or existing
Thank you...
-
EBS R12.2 inventory_bak.xml
Hi all
EBS R12.2.4
RHEL 6.6
I checked our oraInventory folder, and I've seen a lot of inventory.xml backup.
under/U01/oraInventory/are:
-rw - rw-. 1 appvis s/n 2597 Mar 21 01:52./backup/2015-03-21_01-59-17AM/ContentsXML/inventory_bak.xml
-rw - rw-. 1 appvis s/n 2597 Mar 21 01:52./backup/2015-03-21_03-24-11AM/ContentsXML/inventory_bak.xml
-rw - rw-. 1 appvis s/n 2597 Mar 21 01:52./backup/2015-03-21_01-58-20AM/ContentsXML/inventory_bak.xml
-rw - rw-. 1 appvis s/n 2597 Mar 21 01:52./backup/2015-03-21_03-25-08AM/ContentsXML/inventory_bak.xml
-rw - rw-. 1 appvis s/n 3205 Mar 26 06:39./backup/2015-03-26_06-47-31AM/ContentsXML/inventory_bak.xml
-rw - rw-. 1 appvis s/n 3205 Mar 26 06:39./backup/2015-03-26_06-49-04AM/ContentsXML/inventory_bak.xml
-rw - rw-. 1 appvis s/n 2597 Mar 21 01:52./backup/2015-03-21_01-57-42AM/ContentsXML/inventory_bak.xml
-rw - rw-. 1 appvis s/n 3205 Mar 26 06:39./backup/2015-03-26_06-48-08AM/ContentsXML/inventory_bak.xml
-rw - rw-. 1 appvis s/n 2597 Mar 21 01:52./backup/2015-03-21_03-23-33AM/ContentsXML/inventory_bak.xml
-rw - r-. 1 root dba 3205 Mar 26 06:39./ContentsXML/inventory_bak.xml
Can you tell me what process produced this backup? And I can use them for restoration?
In fact, when I do after cloning I delete the first entries in the invtory, so I have created my own backup, which is the last row in the list above.
I didn't know that there are a lot of backup copies. And I don't know what the best of them all?
Thank you very much
MK
Inventory.XML: it contains houses Oracle which installed and registered in this central inventory.xml.
If the process that updates the details home Oracle inventory takes backup of existing inventory.xml.
In the event that your inventory is corrupted then previous backup can help you to identify/re-attach the ORACLE_HOME saved earlier with your central inventory details.
Please see notes for more details below:
R12.2 How to re - join the inventory Central (Doc ID 1586607.1) Oracle Homes
How check if inventory.xml/comps.xml or any Oracle XML file is Correct? (Doc ID 453399.1)
How to find a Central inventory.xml (Doc ID 1470313.1) inventory
Hope that answers your question. Thank you!
-Kj
-
EBS 12.1.1 Oracle install on Oracle Linux 6.6 x 86-64 bit
I downloaded Oracle EBS 12.1.1 for Linux x 86 64-bit delivery; Oracle Linux version 6.6 as OS guest is Windows 7 as host; md5sum to verify the integrity of files downloaded from the EBS as by Doc ID 802195.1. StartCD, error message for each file is: FAILED open or read. I converted the file using the command dos2unix, tried for both versions: 12.1.1.9 and 12.1.1.13 but the problem persists.
For other directories, got the result of following checksum:
oraDB/Disk1/dbts/stage/db42_ctx.zip: FAILURE
oraDB/Disk1/dbts/stage/db43_ctx.zip: FAILURE
oraDB/Disk2/dbts/stage/db41_ctx.zip: FAILURE
File Linux64_part_overview.txt shows that these files belong to V15679 - 01_1of3.zip, but in the circles of the delivery, this file does not exist. files of oraDB in EBS 12.1.1 for Linux x 86-64 in V35224-01_1of3, V35224-01_2of3 and V35224-01_3of3. This means checksum files are not updated? I have re downloaded these files but the problem persists.
I tried to download and check the media several times but the result was even listed above. Then I started the installation, pre-installation check shows 'File System' failed with the error message: there is no such thing as oraInventory. I continued, there was no error during installation but after installation controls reveal "JSP" and "Page"Login"failed with the following error message:
JSP
Check URL = http://localhost.localdomain:8000/OA_HTML/jtfTestCookie.jsp
JSP is not an answer, wait 15 seconds and try again.
JSP is not an answer, wait 15 seconds and try again.
JSP is not an answer, wait 15 seconds and try again.
JSP is not an answer, wait 15 seconds and try again.
JSP is not an answer, wait 15 seconds and try again.
JSP is not an answer, wait 15 seconds and try again.
JSP is not an answer, wait 15 seconds and try again.
JSP is not an answer, wait 15 seconds and try again.
JSP does not
and
Login page
Check URL = http://localhost.localdomain:8000/OA_HTML/AppsLogin
RW-50016: error:-{0} not created:
File = {1}
Any suggestion to solve these problems?
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
# 127.0.0.1 localhost.localdomain localhost - only comments not this line
It says very clearly do not remove these lines, and yet you have commented
you might have used just any presented another host name "localhost".
for example
[ip_address] [NodeName]. [domain_name] [NodeName]
192.168.1.65 vision.mylearn.com vision
Please follow this note and see if that solves your problem
R12 Rapidwiz fails on the message installation tasks: RW-50016, Timed Out (100000) (Doc ID 437152.1)
Doen't work, take a look on
Correct the method of changing the IP address in 11i & R12(Doc ID 751328.1)
How to change the host name to E-Business Suite Release 12 on single node(Doc ID 1277556.1)
If you ever feel to reinstall
How to remove Oracle applications and clean up the environment of the BONE
-
The EBS for 12.2 Setup error
Hi all
Had this error:
NER the /u01/oracle/VIS/11.2.0/admin/ Log file VIS_ebs/diag/tnslsnr/ebs/screws / Alert/Log.xml
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = server)(PORT=1521)))
Summary of services...
Service 'SCREW' has 1 instance (s).
Instance of "SCREW", status UNKNOWN, has 1 operation for this service...
The command completed successfully
addlnctl.sh: exit with status 0
addlnctl.sh: check the /u01/oracle/VIS/11.2.0/ log file appsutil/log/VIS_ebs/addlnctl. txt for more information...
change ebs_logon trigger: DISABLE
InstallAppNode2: Please see the remaining newspapers on the applications node secondary to the - / u01/oracle/SCREWS/fs2/inst/apps / VIS_ebs/logs/02061816.log
Here are some excerpts: he failed the T2K session:
Installation 10.1.2 remedial tools.
With the help of /u01/oracle/VIS/fs2/inst/apps/VIS_ebs/temp/xmldocs/instToolPatches.xml
L'exécution de commande : /u01/software/ebs/stage_R12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /u01/oracle/VIS/fs2/inst/apps/VIS_ebs/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/u01/Oracle/vis/FS2/inst/Apps/VIS_ebs/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/u01/oracle/VIS/fs2/EBSapps/appl/admin/VIS_ebs/-Doracle.apps.fnd.txk.runtime.config=/u01/oracle/VIS/fs2/inst/apps/VIS_ebs/temp/xmldocs/instToolPatches.xml oracle.apps.fnd.txk.config.InstallService
Fatal error: T2K install Service
oracle.apps.fnd.txk.config.ProcessStateException: FileSys OS COMMAND Failed: output = 2 see Journal for more details. CMD = make-f ins_forms.mk sharedlib installation # node = NodeId = 1103 Type = TypeName = filesys_patch_action name = RefId = 457 24 State = init ConfigDoc = APPS_C_HOME ParentDoc = null topology = R12 Action = os_cmd
at oracle.apps.fnd.txk.config.FileSysPatchActionNode.doFileSysOSCmd(FileSysPatchActionNode.java:169)
************
any way to restart or to clean and to make the installation process again after cleaning?
Please check the following logs for details about the error.
/U01/Oracle/vis/FS2/inst/apps/VIS_ebs/admin/log/ApplyAppsTechStack_02062027.log
/U01/app/oraInventory/logs/installActions2015-02-06_06-52-20PM.log
Complete set of newspapers can be found in (troubleshooting quick install for E-Business Suite version 12.2 (Doc ID 1378579.1)).
Thank you
Hussein
-
EBS R12.2 Failed cloning appsTier
Hi all
EBS R12.2
I cloned my applTier, but it took so much time and hanged.
When I restarted the failed clone, I get error of inventory:
#############################################################
Started ApplyAppsTier to Wed Nov 12 14:49:54 PHT 2014
Version:
ApplyAppsTier.java: 120.11.12020000.6
#############################################################
Under Oracle homes are already enrolled in the global inventory:
/ Home/appluat/UAT/FS1/FMW_Home/Oracle_EBS-App1
/ Home/appluat/UAT/FS1/FMW_Home/webtier
/ Home/appluat/UAT/FS1/FMW_Home/oracle_common
Output of cloning...
Ensure that Oracle homes above are not saved to the global inventory "/ u01/oraInventory/ContentsXML/inventory.xml" and restart the script adcfgclone.pl
--------------------
I tried to unregister the existing oracle_homes, but I got by using the error:
$./runInstaller.sh - detachhome ORACLE_HOME = / home/appluat/UAT/fs1/FMW_Home/oracle_common
From Oracle Universal Installer...
Check the swap space: must be greater than 500 MB. Real 9241 MB passed
The pointer of the inventory is to /etc/oraInst.loc
The inventory is located at/u01/oraInventory
'DetachHome' failed.
How can I solve this problem of radiation? How can I manually remove the clone appsTier recorded at home?
Thank you very much
Wee
Hello
Please use the below command
/Oracle_EBS-App1/Oui/bin/detachHome.sh Thank you
Bharat
-
Hi all;
I need urgent help. My system is:
Platform: Linux
DBVERSION: 9.2.0.8.0
EBS versiyon:11.5.10.2
I want to clone for my test environment.i could work autoconfig next to apps, but then only I tyr it dbside I got this error:
autotry allows to use the opatch for a patch utility. When I use opatch apply the command I got this error:
AutoConfig could not successfully run the following scripts:
Directory: /oracle/VIS/database/visdb/9.2.0/appsutil/install/VIS
afdbprf.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully run the following scripts:
Directory: /oracle/VIS/database/visdb/9.2.0/appsutil/install/VIS
adcrobj.sh INSTE8_APPLY 1
Fate of 2 stateful auto-configuration
I found this doc from metalink: Note: 401444.1
I'm trying to make the patch Patch 5391326 et Patch 5495695 with opatch utulity, I got this error:
Could not open the file: /etc/oraInst.loc
Please use the option - invPtrLoc and specify the correct file for OPatch seek the central inventory.
ERROR: OPatch failed due to problem of stocks.
When I check under/etc oraInst.loc, I noticed that it is not locate oraInventory and oraInst.loc... I guess I have to re-create these files manually...
Anyone know how I can create these files?
Thanks for the tips
HELIOSHelios,
Check the script, it says...
This script is run from a session nolog; login first.
Means, you must connect as sysdba first, then run the script.
In addition, do you see any errors in the log file of this script (%ORACLE_HOME%\appsutil\log\
\adcrobj.txt)? -
EBS 2008, Exchange 2007 + Exhcange 2010
HEY, it's posible installation place a domain controller more + Exchange 2010 on EBS 2008 scenario without downgrade News (e-mail management + DC DC 2007 + security)?
Not migrate EBS 2008 Windsows 2k8R2 + Ex2010...
Thank you
Please repost your request in a more appropriate in Forum Windows Servers. Thank you!
-
ASIC can run on the same server/db like EBS (R12.1)
Hello
We have an EBS (R12.1) environment and intend to use the CPSA. I've seen environments where the CAWC runs in its own environment/database, etc. and connects to an instance of the EBS. Which is the only type of available configuration or can CAWC run fully within an environment of EBS/instance on the same server? If so, what are the consequences of such a configuration, for example on the performance.
Thank you
NAT.
Hi Nat,
ASIC can be configured in two ways:
1 centralized - where the EBS and VCP reside on the same application server.
2 decentralized - where the EBS and CRS are on two different application servers.
Basically the motor nucleus of CPSA of planning does all the planning in the memory of the application server (and not in the database). This planning process is highly require a lot of resources (memory) and requires a huge memory (according to the data, the type of plan and many other factors). If the application servers are not the right size, this led to the poor performance of the application. And if both the planning and EBS reside on the same server, there are possibilities that you slow the global treatment through the functions of the company. That's why decentralized architecture is preferred, where the planning process running on another remote computer of your EBS and it didn't there in not affecting transactional modules.
Beyond that, you have the ease of maintenance in terms of correction, update, addition of multiple of VCP modules, if you're on a decentralised architecture.
Centralized architecture is also not rare. Many companies run their planning and EBS on a single machine.
I hope that the above gives you a point of view, using which you can choose what suits your business best!
Kind regards
Mohan Balaji
-
Convert the EBS for one example at RAC
Hi all
EBS R12.2.4
11 GR 2
OL 6.5
I want to convert our EBS instance to RAC.
Can you share me documentation on how to convert a single instance of the EBS R12.2.4 CARS?
I need to convert both the apps and the level of db? or the level of db only?
Kind regards
JC
Hi Vishnu,
I ran the 2nd step: but received the error
rman target $ /.
Recovery Manager: release 11.2.0.3.0 - Production on Tue Feb 23 11:42:11 2016
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00554: initialization of the package manager internal collection failed
RMAN-04005: target database error:
ORA-21561: OID generation failed
Kind regards
Maybe you are looking for
-
Apple is no longer sells monitors? I can't find a page on the site that offers them.
-
Help! Is no longer able to save images from email or Facebook
RRecently set updated to 9. Unable to save pictures from FaceBook and e-mail. Important I can well before the success. Did not put mini updated, but unable to save pictures there either. Also iPad that air does not have correct self from horizontal t
-
Cannot delete the Facebook of Skype contacts
Hello I have looked & looked for a solution to my problem nothing works and I'm now out of my mind with this. A few months ago that I connected to Facebook to Skype thought it would be a good idea, but it is not good for business (I use Skype for bus
-
How do I see the full example vi
Hello I just want to know how can I see the full example VI. for example, I opened a void VI and in the diagram Panel I right click and see the 'Functions' tab from which I select 'Arduino' and then I choose 'examples', then 'examples of servo. It gi
-
I need a Canon LIDE 110 the Microsoft Word 2010 new scan.
original title: digitization of Canon scanner LIDE 110 to Microsoft Word 2010 I need a Canon LIDE 110 the Microsoft Word 2010 new scan. I've been using Adobe PhotoShop, then download a converter. Can I search directly in Word?