Ebs12 clone on the same machine

Similar Questions

• Layout error creating database clone on the same windows machine.

  I am tring to create the database clone on the same machine with rman.
  I made after the steps and get below error.
  
  (1) service created for clone
  2) had full hot backup with rman of primary DB(*.db_name='PROD')
  (3) startup pfile = 'initclone.ora' nomount; -> (* .db_name = 'PROD' and * .db_unique_name = "clone" parameter)
  RMAN 4) > restore controlfile to ' C:\oracle\product\10.2.0\flash_recovery_area\PROD\BACKUPSET\2010_08_29\O1_MF_NCSNF_TAG20100829T174218_67NMPW8D_. BKP';
  (5) sql > alter the editing of the database;
  6)
  RMAN > run {}
  the value of newname for datafile 1 to ' c:\clone\SYSTEM01. DBF';
  the value of newname for datafile 2 to ' c:\clone\UNDOTBS01. DBF';
  the value of newname for datafile 3 to ' c:\clone\SYSAUX01. DBF';
  the value of newname for datafile 4 to ' c:\clone\USERS01. DBF';
  the value of newname for datafile 5 to ' c:\clone\EXAMPLE01. DBF';
  restore the database;
  switch datafile;
  }
  
  (7) SQL > restore database using backup controlfile;
  ORA-00279: change 796656 September at 2010-08-29 17:42:19 needed to screw 1 ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_27_%U_. ARC
  ORA-00280: change 796656 thread 1 is in sequence #27
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_27_67NMSJ5Z_. ARC
  ORA-00279: change 797296 September at 2010-08-29 17:44:40 needed to screw 1 ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_28_%U_. ARC
  ORA-00280: change 797296 thread 1 is in sequence #28
  ORA-00278: log file ' C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_27_67NMSJ5Z_. ARC' is no longer necessary for this recovery
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_28_67NMSL6C_. ARC
  ORA-00279: change 797301 September at 2010-08-29 17:44:42 necessary to screw 1 ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_29_%U_. ARC
  ORA-00280: change 797301 thread 1 is in sequence #29
  ORA-00278: log file ' C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_28_67NMSL6C_. ARC' is no longer necessary for this recovery
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_29_67NN4WJD_. ARC
  ORA-00279: change 797828 September at 2010-08-29 17:50:44 needed to screw 1
  ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_30_%U_. ARC
  ORA-00280: change 797828 thread 1 is in sequence #30
  ORA-00278: log file ' C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_29_67NN4WJD_. ARC' is no longer
  necessary for this recovery
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_30_67NN9W5F_. ARC
  ORA-00279: change 799046 September at 2010-08-29 17:53:23 necessary to screw 1
  ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_31_%U_. ARC
  ORA-00280: change 799046 thread 1 is in sequence #31
  ORA-00278: log file ' C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_30_67NN9W5F_. ARC' is no longer
  necessary for this recovery
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  
  
  
  She asks more of files, but in my primary DB, I have files not more arch.
  I have also generated new arc with "alter system archive log courses;" and applied but still getting the same error
  
  My primary database is in working condition and I can't stop it and I have in the file initora clone.
  
  Please suggest...

  Gour wrote:
  Still getting the same error

  SQL > restore database using backup controlfile;
  ORA-00279: change 799046 September at 2010-08-29 17:53:23 necessary to screw 1
  ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_31_%U_. ARC
  ORA-00280: change 799046 thread 1 is in sequence #31

  Specify the log: {= suggested |} Filename | AUTO | CANCEL}
  Cancel
  Cancelled media recovery.
  SQL > ALTER DATABASE OPEN RESETLOGS;
  ALTER DATABASE OPEN RESETLOGS
  *
  ERROR on line 1:

  
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' C:\CLONE\SYSTEM01. DBF'

  Try again, after step 5 cross rman
  6)
  RMAN >
  Catalogue start with "C:\oracle\product\10.2.0\flash_recovery_area\PROD\archive_logfullparh";
  Run {}
  the value of newname for datafile 1 to ' c:\clone\SYSTEM01. DBF';
  the value of newname for datafile 2 to ' c:\clone\UNDOTBS01. DBF';
  the value of newname for datafile 3 to ' c:\clone\SYSAUX01. DBF';
  the value of newname for datafile 4 to ' c:\clone\USERS01. DBF';
  the value of newname for datafile 5 to ' c:\clone\EXAMPLE01. DBF';
  restore the database;
  switch datafile;
  recover the database;
  ALTER database open resetlogs;
  }

  Published by: Alex on August 29, 2010 06:49

• Cannot access site of firefox or google chrome on linux but can virtual XP on the same machine

  Run firefox 3.6.24 under Fedora core 14 64-bit. Could not load certain pages of the website with firefox or google chrome schoolfusion. I do not found Server error. On the same machine a virtual XP with IE or chrome can access the site. I checked the release of wireshark and the query is DNS as well as a good answer to the query or the dns returns the correct ip address. So I don't understand why the server error. On the same website, a link that works starts with 2 identical DNS queries, both get identical answers. There are a few settings network under linux only?
  I have an internet direct connect without a proxy.
  I tried all of the suggestions under Server error.

  Thank you

  It is "fixed" now, it turns out that the problem was that URLS that wouldn't have. It's a dash followed by a period.

  What I still don't understand, is why the error message was not clear. He said that he could not find the server but it reported the entire string, including the... There was therefore no indication as to why he could not find the server. It was also strange that IE and google chrome in XP both worked.

• Firefox started running slow about 3 Mbit/s on the same machine that is running to about 6 Mbps, reinstalled firefox twice, but no improvement.

  I have a mini-tower with windows OS computer using the Firefox browser, it started to run slowly, 3Mbps, while on the same machine using for example the download speed is about 6 Mbps, which is what I used to get with Firefox. Oddly enough, I have another machine a net book with Linux OS and Firefox browser and who always gets a good speed to about 6 Mbps, which seems to point to the windows version of Firefox being the problem. I tried twice to reinstall Firefox, but there is no improvement, recently, there has been a couple of updates for Firefox and would like to know is possible to go back to an older version to see if that solves the problem.

  I was so sure that I could be that the problem was with the combination of f-secure, windows vista and Firefox. The O.S. I can not change, Firefox I won't change if f-secure has drawn the short straw. Fortunately, I don't have a long contract with f-secure, I so uninstalled and moved, replacement works very well, too short life.

• Stand By worked in XP Home, but not XP Pro SP3 on the same machine

  Stand By worked in XP Home, but not XP Pro SP3 on the same machine.
  How can I get Stand By under XP Pro SP3?

  * title Moose - see http://stlcc.org/SYS/Standby.bmp for the issue.*

  Hi srfpala,

  I suggest that you manually download and install the latest drivers for the graphics card graphics card or computer manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

• Can I use Vista Upgrade product key on the SAME machine?

  I upgraded my Vista Home Premium to XP media Center computer, and now my computer runs very slowly.  I have 1 GB of RAM, but isn't enough for Aero?  So... what I really do is to perform a new installation to refresh my computer, but I can do after already using my key product upgrade once? (Now I have an external HARD drive to back up my data... I didn't when I upgraded).  The new facility will be used with the same upgrade DVD and product key, and it will be used on the SAME machine.  This is allowed, or vista become inactive and I lose Vista completely?

  Yes you can reinstall Windows Vista by using the Windows Vista Upgrade activation disk works perfectly. Make sure you have your 25-digit product key.

  Also, make sure that you have installed once are not dual boot.

  My advice is that you bring a new installation with Service Pack 1 disc as shown here:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.aspx

  Follow the instructions for installation, as in this case:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3327.aspx

  Please note that the guide is basis of Dell, F12 can be a different key on your machine and you need to get your site system drivers from your computer manufacturer Web but most of the others in the guide apply to all windows based computers.

• Microsoft Visual C++ 2005 Redistributable package (x 86) version compatibility (x 64) version on the same machine

  I have Windows Vista Home Premium 64-bit, Service pack 2 installed on my machine.

  I was informed by a software vendor to install the Microsoft Visual C++ (x 86) redistributable package.

  However I have recently installed Microsoft Visual C++ Redistributable package (x 64) installed.

  I wonder if the packages can be installed on the same machine and coexist (and work correctly) without problems of conflict.

  Hello

  Installation of Microsoft Visual C++ 2005 Redistributable package (x 86) is not in conflictwith Microsoft Visual C++ 2005 Redistributable package (x 64).

  Hope that helps.

• Parameters for the single instance of DCOM for multiple users on the same machine

  I have a DCOM on a Windows 2008 R2, Enterprise Edition machine. I would like to be able to open an instance of the DCOM and have it accessible by multiple users on the same machine, i.e. users connected to Windows accounts.

  What settings will do? In the tab 'identity' in dcomconfg for my DCOM object settings, I tried "interactive user", 'the user running' and 'this user', all three lead to the same result: start a new instance DCOM on easch Windows of the connected customer accounts, despite the existence of bodies being already running on other accounts. This baffles me, especially with the third alternative, 'this user', which should certainly lead to all proceedings being started by this specific account? This is not the case. Any help would be appreciated!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Recovery disk, for 7, 3 product key. What happens if I want to install win 8.1 pro on the same machine?

  I bought a lenovo desktop, which came with win 7 pro preinstalled via downgrade rights in win pro 8.1.

  now my questions are:

  1. How to make a recovery to win 7 pro disc, that I can use if you need arises to reinstall win 7 pro. ?
  2. Since then, the win 7 pro is preinstalled, so how do I access the product key?
  3. What if I want to install win 8.1 pro on the same machine - product one key method to do?

  Former title: windows

  The instructions in the same article shows you how to restore the image if you need to do:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  One of the things that I recommend you do so after creating the system image is to change the name of the computer to something else, so if you decide to create another backup system image, it's not too write the original. You can use this even as a method for having multiple images of different systems.

  Change your computer name - Windows help

• Impossible to activate the OEM Windows 7 after reappattage on the same machine after a disk crash

  When I buy my Mac, I was told that I could run Win 7 on a virtual machine using the Parallels application. I bought the Parallels software and an OEM Version of Win 7 Home Premium and istall and activate it without any problem. Recently, my hard drive crashed and I need to replace the hard drive and reinstall all software including the virtual machine and Win 7. I could not reactivate the Win 7 and I could not reactivate the Win 7 on the same machine.

  Their support came back with a long history to this subject and this restriction and in short to expect me to buy a version full of Windows 7 to install in Mac. Y at - it another way to activate windows because there is no phone number that I can call them and talk to them. Why OEM version is freely available and still no appropriate advice are given to the retailer t explain some limitations? Consumers like us usually bear the burden of all these issues as the purchase of a legal but copy cannot be activated and suckers feels when we were told a long string of legal things that did not communicate to us when we buy.

  Thank you

  Kenny

  It is one of the reasons why it is not a good idea to use an OEM software in virtual machines.

  You must use the activation of the operator and see if they will allow the reactivation.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Windows IPSEC and SSL VPN client on the same machine

  Matches (coexistence) installation of IPSEC and SSL vpn clients that are supported on the same computer, windows (XP and Win7)?

  As mentioned by Patricia and Jennifer (5 stars), you can install two clients on the same machine without any problem.

  The tricky part comes when you are trying to connect two clients at the same time, that's when you may encounter unexpected problems.

  However, if your intention is to install both clients and connect them individually and not at the same time, you'll be fine.

  If you have any other questions, please mark this question as answered and note all messages that you have found useful.

  Thank you.

  Portu.

  Post edited by: Javier Portuguez

• install OracleClient12cR1 x 64 and x 86 on the same machine

  Hello

  I am not able to install OracleClient x 86 on the server 2012R2, which is already installed with the OracleClient x 64 version, I want to install the driver oracle ODBC time x 86 and x 64 for 12cR1 on the same machine. Any ideas? Thank you.

  I finally got this: http://www.oracle.com/technetwork/topics/dotnet/utilsoft-086879.html

• How to run multiple copies of distilling on the same machine?

  What version of Adobe PDF Converter do I need to run multiple copies of distilling on the same machine?

  I see that Distiller Server is EOL so what should I use to accomplish the same task.

  Hi mmaraffi,

  You will not be able to run multiple copies of Distiller, because this is a violation of the EULA.

  Let me know the version of Acrobat is installed on your computer?

  Kind regards

  Nicos

• If I use a license of Captivate 8 upgrade to 9, I could move it to another machine or upgrading has to go on the same machine as the previous version?

  I have 8 Captivate on an old hard drive and I would get a license to upgrade to 9 but I was wondering if I could install 9 directly on the new hard drive or should I install on the old version first and then move?

  Hi Valentttine,

  Usually with the Adobe software, you can have several versions on the same machine without problem - if the prior release is maintaining your choice.

  And if you install an upgraded version on a different machine from the previous version, you must enter the serial number of the old product when you install the new software, is everything.

  Hope that helps!

• Can I run time after effects CC &amp; CC 2014 on the same machine?

  I've recently updated AfterEffects CC-AE CC 2014. I use Cinema4D lite extensively, but I am unable to use the new Cinema4Dlite R16 with AE CC 2014. My question is:

  I'd be able to run both versions of AE and Cineware on the same machine?

  And if yes, why I can't use C4Dlite in CC 2014? (C4D lite is open, but I'm unable to select one of the buttons or anything in the menus).

  I recently worked with a client who was running CS6, and I found that to make a compatible with CS6 AE CC 2014 file, I needed to export from 2014, then export again CC, hence the need to run both.

  I really appreciate help or solutions that anyone can offer to this.

  I use Windows 8.1

  And my machine features:

  Intel Core i7-3610QM CPU @2. 30 GHz

  8.00 GB of Ram

  64 bit

  Thank you very much

  Ben

  Yes