Editing to HTML5 and window is not automatic resizing

Similar Questions

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Windows could not automatically detects the network proxy settings

  Recently, I noticed a triangle appearing little attention with my network icon in the taskbar. When I right click and solve problems, it comes with this message. Windows could not automatically detect the network proxy settings. My internet has been really slow lately, but I wonder if there is a problem with my network? or is - something that my ISP has set?

  (This message is intended for all problem reports)

  Check the Internet Options (Internet Explorer tools or configuration panel / /Connections Options tab / LAN Settings and make sure that Proxy Server is not checked even if you use Firefox.)  Check the settings in Firefox Tools / Advanced connections / settings (should be use system proxy settings or no proxy).

  Search for malware, especially using malwarebytes.

  Try these commands in this order in an elevated command prompt.  Not the first first, then reboot and try.  If still bad, try the second.

  netsh winsock reset
  netsh int ipv4 reset

  If they do not help, please after the output of a command ipconfig/all-order

• Windows could not automatically bind the Protocol IP on the network card stack.

  Hello

  I installed an Edimax EW-7718Un network adapter that does not connect to the internet. I installed the same device on my Windows Vista laptop and it works fine, this isn't a problem with the product or my BT Home Hub. I checked the Edimax website and this product is compatible with Windows 7, and I have the latest drivers for it. I did the following to try to resolve the problem:
  -I've already been on the adapter properties, and clicked on "update drivers", the system says that the network card is working properly and that the drivers are up to date. I also installed the latest drivers on the Edimax website but the issue is not resolved.

  When I solve the problem, he told me that "Windows could not automatically bind the IP protocol for the network card stack."

  Please note that the settings are correct as the TCP/IP and DNS are set on "automatically get an IPv6/4 address server / DNS automatically".

  Also of note is that in "Network connections" in the Control Panel, the device is listed as "Disabled", I click to activate it but it does nothing, the network connection is still disabled. When I click on "analyze what" the same message "Windows could not automatically bind the IP protocol stack to the adapter network." appears.

  I also have compeltely re-installed Windows 7 and use the system restore, neither worked.

  I hope you can solve this problem.
  Thank you
  Mickey

  Hi Mickey888,

  According to the information provided by the Edimax website this particular model supports up to Windows Vista only.

  http://www.Edimax.us/HTML/English/products/EW-7718Unspec.htm

  You can try to install the same in compatibility mode and see if that solves the problem. To run the troubleshoot compatibility utility follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win7x64 with adapter DWA-160, "Windows could not automatically bind the IP protocol for the network card stack."

  As the title suggests, I am running Windows 7 family, 64 bit. This is a new installation, a few days ago and I have not installed anything on, or changed the settings.

  I installed a DWA-160 D-link Wireless adapter n with the current drivers, fix (before you ask to confirm, they come from Web site of D - link. I used initially the disk included in the box, however, this has generated the same question that I'll explain, so I uninstalled this software and has continued to use the Windows program to connect to the wireless network.

  I can connect to the network, of course; However, I get the message "Windows could not automatically bind the Protocol IP on the network card stack" when connecting each time.

  After searching for an answer, I tried to turn on the WLAN auto configuration service, however, it is enabled by default. If this isn't any help.

  Tried the netsh winsock / netsh int ip / netsh int ipv4 / netsh int ipv6 reset and restarted after each, no change, if this isn't any help.

  Made sure the problem wasn't with the wireless router, and it isn't because I can connect with my laptop.

  Tried to plug in the USB stick on another computer yet. I don't want to plug into my laptop just to test that possibility. So. Yes.

  I also don't know much about all the inner workings of one of these things, so it would be rad If everything was in one step by step. Thanks in advance.

  Try to run This Fix - It.

• Error: One of the USB devices attached to this system has malfunctioned, and windows does not recognize it.

  tried already everything written here. When I plug my USB device (3 of them) my Windows a sad of the USB devices attached to this system has malfunctioned, and windows does not recognize it. I tried plugging it into another winXP machine, it won't work. Can you help me?

  Original title: usb malfunction

  His salvation,

  Thanks for posting your query in Microsoft Community Forum.

  1. What are the troubleshooting steps you have tried so far?
  2. If it works much earlier? If so, did you do changes on the computer before this problem?
  3. What type of USB device you are using?

  As you mentioned that the USB device does not work when plugged into a WinXP machine, it may be a problem with the device itself. In addition, the question may also arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows.

  Therefore, I suggest you try the following methods (skip the ones that you already tried) and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  If the device fails after updating the driver, you can try to roll back the driver with its previous version.

  Restore a driver with its previous version

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Window can not automatically detects the network proxy settings

  Original title: window could not automatically detect the network proxy settings
   
  Windows network diagnostics says constantly "" window could not automatically detect the network proxy settings"" How can I fix it I have a Windows laptop, 8 and I can't use the internet, most of the time, but the internet bars are full and there is no yellow triangle with a! next to him.  Usind Ethernet instead of WIFI makes not much difference if you please, help.

  

  

  Hello Sarandeep Singh,

  Thanks for your reply Sarandeep. Now, this problem has been resolved. I that follows the steps of: https://support.microsoft.com/en-us/help/15287/windows-why-can-not-get-connected ( run Networking command after using the convenience store network )

  Thanks again.

• 1410: HDD password appears and Windows does not start

  in a 1410 out of the blue sundendly apears a message PASSWORD HARD drive and windows will not start how to solve the problem?

  Hello

  He password disk HARD is not removable without knowing the old password of HDD.
  If you n t know this password for the HARD drive is locked and it s not possible to use it.
  Unfortunately there is no other possibility

• one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
  kindly help

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

• Error - "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  Original title: USB device not recognized / dysfunction

  "Unrecognized USB device".
  One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Help for this problem, click this message. »

  This is what I get AFTER that I had to reinstall windows XP because a virus has attacked my computer a little before avg and Microsoft security essentials picked it up and destroyed... I have reinstalled twice... then I changed discs since I have two... well, I get this message from my 2 external Seagate Freeagent and my Phillips mp3 go gear aria... player these devices work on the laptop from my friend and she is under vista. It seems that since then they have worked on my computer before they would always run. My mouse and my cam work fine and my Canon printer gets thus detected... a few readers who have the space that is made... Ive looked everywhere for a solution... even upgraded windows media 11 and is player went to service pack 3. restarted several times... tried dPower Management tab and tried to

  Open recognition of the USB device by using Device Manager.

  .. I am at a loss: P please help thanks!

  isable the power management of the USB hub and I couldn't find the

  Hi LadyDefi,

  You can try to uninstall and reinstall the USB controllers and check:

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

  b. click on the Hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and test to make sure that the problem is solved

  For more information, see the following article:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.