Edition 64 bit vista Ultimate windows updates not available for Canon Laser Shot LBP-1120 printer driver

Similar Questions

• Windows 8: need for Canon Laser Shot LBP-1120 printer driver

  I turned on my printer, the other day for the first time since the installation of Windows 8, and nothing happened.

  XP drivers I used do not work, or no Vista I found drivers.

  Does anyone has experience of this printer with Windows 8, or may suggest a compatible driver please?

  For the record:
  I did it. In fact, it is possible to connect a lasershot 1120 Windows 7 x 64 machine.
  This should work for win8, don't test that but this guide could still be useful. Not for the faint of heart, however, you must be comfortable with your operating system.
  Here goes:
  You need virtual machines for this race of win xp.
  Download the integration for the printer modules.
  the usb section it should list as shared. Change the connect, disable it in Windows 7.
  Install the drivers for Windows XP in the VM through devices > new printer. Those of your original download copy on the virtual disk before their execution. Note that the winspool service crashes. Restart services whenever he does. Check the usb device back to shared. Reconnection in case of failure. To do this, it seems a lot. There is a known bug in the canon CAPT pilot to crash the spooler by the UMBus enumerator service. Because of the virtual machine, you can not fix this. I'm sorry.
  Make sure to get the solution of prevention dep canon and install it as well. It's an exe located on the site of canon driver. Only, it'll work when or is in place. At this point, I have made a link to the desktop for system services. To save you the trouble to go to the config.
  When everything is installed, you must stop and restart.
  With the printer connected and good start win XP virtual.
  Spooler crash, nevermind. Go to start > programs > startup and delete the canon statusthingy.
  change the settings for usb devices connected.
  Check printing devices, it should show the lbp1120. The opening he does fail, no spooler.
  restart the or an once more.
  Check once again, opening the printer lbp must now produce the windows printer box with its 'ready' status Note that the canon tray printerthingy report normally used, but you should now be able to print things to him.

  Note: it took me a long time, juggle with win xp, or restarts, reinstall the drivers, etc...
  You must be determined enough to make it work as the virtual machine is slow, restaring it takes forever and the final result is still imperfect, you have to do the whole routine restart or after the virtual Windows XP startup whenever you need.

  Now, once you've got liftoff is the printing process:

  -connect the printer
  -Start win XP virtual machine
  -USB > camera Canon CAPS > connect
  -Restart the printer spooler in: Config > System Management > System Services > or > start
  -Open the document and print it

  Complicated way to do it, but I use this printer for manufacturing toner-transfer method custom circuits and this way I don't have to put my designs on USB and start ye olde win XP on another pc.
  Still I had some good fun breaking the problem :-)

• Cannot install canon laser shot lbp-1120 on windows 7

  Hello
  I've recently updated my OS Win 7 Ultimate 64-bit. But unfortunately I can't use my printer. I can't install software turned canon lbp-1120 laser. When I tried to add a printer from the control panel > hardware and sound > add a printer: If you ask to install the printer driver, I chose to have a disk and a pop-up window opened and I choose a file ' CAP3SETK. INF' and systems said:

  ---------------------------
  Select the device
  ---------------------------
  The specified folder contains a compatible software driver for your device. If the folder contains a driver, make sure that it is designed to work with Windows for x 64 systems.

  But I don't know when I installed win 7 Ultimate 32 bit. He was working.

  Can someone help me?

  Hello
  I've recently updated my OS Win 7 Ultimate 64-bit. But unfortunately I can't use my printer. I can't install software turned canon lbp-1120 laser. When I tried to add a printer...

  But I don't know when I installed win 7 Ultimate 32 bit. He was working.

  Can someone help me?

  G ' Day,.

  I found the same problem. This printer works very well under Windows 7 32-bit and does not at all under Windows 7 64-bit.

  Support section of the Canon Web site says the LBP-1120 is only supported under Windows 7 32 bit. Canon driver will not work on Windows 7 64-bit. And Canon says that they have no plans to support the 1120 Windows 7 64-bit either.

  Looks like we're both blocked :(

  Source: https://www.canon-europe.com/Support/Consumer_Products/products/printers/Laser/Laser_Shot_LBP1120.aspx?faqtcmuri=tcm:13 - 695190 & page = 1 & type = faq

  see you soon,

  Yordany

• Canon LASER SHOT LBP-1210 driver for windows 7 with 64 bit

  How to install Canon LASER SHOT LBP-1210 driver for windows 7 with 64 bit.

  See this post...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Canon-laser-shot-LBP-1210-driver-for-winodows-7/9431fdf2-d7a5-47E2-A528-7cafd8966473

• Windows Update not available on my xp home edition. Also no pgedit and bits do not work.

  "windows update is not available" for my xp Home Edition.  I followed the instructions to fix and found that I had no gpedit.  Also said something about BITS works do not.  I don't have my recovery disks.  I care not one of my files.  I want just a fresh install of xp.  I tried microsoft fix it but no good.  I tried to change the recommended registry but nothing.  I need to have regular updates for my xp system.

  [1] I got a really nice, totally authentic Dell with XP home Edition with product information and all that.  My problem is that he had suffered some nasty virus that makes it unusable or at least the inheritee.

  [2] the recovery discs can be acquired from the source, i.e. of Dell

  A1. You should have to do a clean install when you inherited the computer. Since you have not, it's yet another reason to do it now.

  A2. If a set of disks came with the computer, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do a clean install (in Dell-speak, a "destructive recovery"). You will find information about this in the Dell Support Web site (e.g., http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&l=en&s=dhs&docid=181316).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista Ultimate - Auto update not work - several updates failed... Defender no longer works...

  Looking at the history - looks began failure in July of 09... have a many updates that have failed. Windows Defender has stopped working... I tried to download IE 8 and it will not work... said the encryption must be running?

  Update Rollup for the stop bits ActiveX for Windows Vista (KB969898)

  Update security for Windows Vista (KB970238)

  A security update cumulative for Internet Explorer 7 for Windows Vista (KB969897)

  Update for Windows Mail Junk e-mail filter [June 2009] (KB905866)

  Update security for Windows Vista (KB961501)

  Update security for Windows Vista (KB968537)

  Cumulative update for Media Center for Windows Vista (KB967632)

  The list is quite long here...

  any help would be appreciated...

  Looking at the history - looks began failure in July of 09... have a many updates that have failed. Windows Defender has stopped working... I tried to download IE 8 and it will not work... said the encryption must be running?

  And you've waited 6 months to do something? Not good.

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Realtek driver update not available for Windows XP on Vista B4 upgrade to Windows 7

  Hi all I set up my cell phone before installing Windows 7.  The compatibility check says I need to download the latest driver for Realtek RTL8139/810xFamily Fast Ethernet Realtek Semiconductor NIC and before reinstalling after installing Windows 7.  However, when I tried to do this Realtek said it is not available. Any advice on what to do? If I install Windows 7 I'll be without driver, really worried then. Thank you in advance, really need help. Thank you in advance, Ros

  If the manufacturer of the hardware does not support the operating system to use, the only possibilities are driver compatibility mode Setup, hope that works of an integrated 'generic' or replace such hardware with something that is supported on the operating system, that you choose to run by the manufacturer of said material.

• Windoxs xp essentials missing microsoft - windows upgrade assistant 8 tells me window 8 not available for purchase online in my region/country?

  Why is windows 8 is not available in my area for download?  I live in long island, new York. I have an Eee PC laptop with windows xp.  CAN I have upgraded to windows 8 or 8.1, or am I screwed and have a computer without microsoft's essential protection?  Shows how to make me buy the new computer? I am currently unemployed, need a computer job, no extra money, and now I buy the new computer?  any ideas on how to upgrade my computer, or do I just use without the microsoft essential and must be nervous about the loss of service?

  On Saturday, April 19, 2014 17:18:38 + 0000, donnadilorenzo wrote:

  Why is windows 8 is not available in my area for download?  I live in long island, new York. I have an Eee PC laptop with windows xp.  CAN I have upgraded to windows 8 or 8.1, or am I screwed and have a computer without microsoft's essential protection?  Shows how to make me buy the new computer? I am currently unemployed, need a computer job, no extra money, and now I buy the new computer?  any ideas on how to upgrade my computer, or do I just use without the microsoft essential and must be nervous about the loss of service?

  You can easily buy an upgrade to Windows 8. For example, the command
  Amazon.com.

  However, note the following:

  1. Although you can use the upgrade version, it is not really a
  upgrade; He's going to do a clean install, which means that you will
  reinstall all your programs.

  2. you can use Windows 8 drivers for some of the materials in
  your computer and it is likely that its manufacturer is not
  them is available for an old man like a Windows XP - era computer.

  3. While your computer can meet the minimum requirements for
  Windows XP, it will almost certainly not be Windows 8 with
  acceptable performance. You probably need to update several
  hardware components and it can cost much more to buy a new
  computer.

• Laser Jet M1217nfw: Are Windows 10 drivers available for my laser jet M1217nfw

  Before I update my Windows 10 operating system, I need to know if it is compatible with my laser jet M1217nfw.

  Any helpful comments would be very appreciated.  Thank you

  Robert

  Hello @RobertN760and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are looking for Windows 10 drivers. I would like to help!

  According to the LaserJet driver page, drivers are available:

  Driver and software of HP LaserJet Full Feature

  Good luck and please let me know if you have any questions. Thanks for posting on the HP Forums!

• Not available for the Photosmart 8450 10.10.1 driver

  What should I do to use a PhotoSmart 8450 on the new OS 10.10.1... no available driver

  Ok

  Try to install the following package manually and add the drivers to your system, and then add it under Printers & Scanners:

  http://support.Apple.com/kb/dl907

  Please let me know of any difference,

  Shlomi

• Vista - Error Code: 80070426 (Windows could not search for new updates)

  I have Windows Vista Home Premium Service Pack 2 on HP Pavilion dv6700 Notebook PC 64 - bit operating system. For about a month, it stopped updating. Whenever I want to update it gives me the same message "Windows could not search for new updates. Error encountered, Code 80070426 ".

  After the possible solutions for others, which posted a similar problem, I typed "service" on start search and on the side slsvc, it gives a description. When I click Start the service, it gives me the message "error 2: the system cannot find the file specified."

  I appreciate any back feeding to help me solve the problem.

  Thank you

  Mikielle

  mikielle,

  0x80070426 - ERROR_SERVICE_NOT_ACTIVE the service has not been started

  Make sure that the automatic update services has been started.  Make sure that BITS is started.

  1. click on start and run, type services.msc, and then click ok.

  2. in the list of services, click on automatic updates, and then click Properties.

  3. in the startup type list, click Automatic, and then click on apply.

  4. If the service status is stopped, click Start, and then click ok.

  5. right click on background intelligent transfer service, and then click Properties.

  6. in the startup type list, click Manual, and then click on apply.

  or

  1 ddwnload and install the wga http://go.microsoft.com/fwlink/?linkid=56062 diagnostic tool

  2. after running the wga diagnostic tool, click the "windows" tab and then click on 'copy to clipboard '.

  3. then, visit the following Web site and create a post in the forum "problems of wga validation" and paste the results of the diagnostic data in a detailed post wga:

  http://forums.Microsoft.com/genuine/default.aspx?siteid=25

  4. a wga troubleshooting specialist will analyze the data and recommend an appropriate solution.

• Windows Vista Edition Home Premium 64. Windows Update error 80070643.

  Hi all!!

  I have the version above for Vista. When I try to search for updates with Windows Update, he says that there is an element to install, I try to install it, Windows Update stops down and after a few moments, reopes with the error message "Windows could not search for new updates. Error 80070643 "code.

  I tried to fix it via the Microsoft Web page, via the .NET Framework solution and office 2003 solution, without success. I installed Office 2007.

  Any help would be welcome

  A big thank you and best regards!

  Raul,
  It is quite possible that the software that you used has made changes to your system that cause this problem.  At this point, I can't recommend completely uninstall the software, and then run the System File Checker tool.  Then try the updates again.  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/

• Windows could not search for new updates. Code 80072EE2

  First, some background...

  I am running Windows Server 2008 / Hyper-V

  I have a Vista OS guest I have loaded from a base image (vhd)

  I also have a Server 2008 guest OS also loaded from a base image

  These images have not been created on this machine.

  I had guest OS installed since the XP CD but since she departed.

  The machine on which it is all performed has a 2.93 GHz Intel Core 2 X 6800 processor.

  8 GB DDR2 RAM

  I've had this problem for several weeks now.  At the beginning I could not the host OS to run updates, it would fail with an error 80072EFE code. This is for several weeks. Finally, while researching this problem I came across an entry mentioning only the BITS required to run so double I checked it. Of course, it was off. I started the service and that fixed the problem with the host operating system and apparently the problems she was having with other sites.

  So I think big is issues with the Vista and the comments of 2008 operating system. No luck, these systems still will not run updates.  The 2008 operating system returns an error "Windows could not search for updates" with a code error 80072EE2

  I tried several solutions to this problem, and at least twice have reloaded the base images because I mucked in the system so much that I lost track of all the changes I had made to the OS.

  I ran these commands...

  regsvr32 /s c:\windows\system32\wuapi.dll
  regsvr32 /s wuaueng1.dll
  regsvr32 /s c:\windows\system32\wuaueng.dll
  regsvr32 /s c:\windows\system32\dllcache\wucltui.dll
  regsvr32 /s wups2.dll
  regsvr32 /s c:\windows\system32\wups.dll
  regsvr32 /s wuweb.dll

  I also tried the procedure found here...

  http://social.answers.Microsoft.com/forums/en-SG/vistawu/thread/6511a332-7de3-4F10-B823-49b6dae86b9c

  Which loads a new "TrustedInstaller.exe" in the folder "C:\windows\Servicing\".

  And on the Vista operating system I also tried this...

  http://support.Microsoft.com/kb/971058

  By clicking on the "Fix It" link.

  It still does not.

  Oddly if that I'm typing this I had rebooted the OS Vista and restart it it notafied me that he was installing updates 1 of 3. However when it finished I tried to check the updates and it gives me the same error "Windows can not find updates" with a code error 80072EE2.

  Someone at - he found an answer to this question. I ask because I'm looking for what I see many people with the same issue.

  You may encounter temporary connection errors [e.g., 80072EE2] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Don't have the Windows Platform Update for Windows Vista in Windows Update.

  I tried to download the new Windows Live Messenger Beta, but it tells me I need to download this update of the platform before I can install the Messenger. I looked at the support page for the update of the platform and he said I can get it from windows update, but when I bring up windows update and search for new updates, it says that my computer is up to date. What could be the problem?
  I have Windows Vista x 64 Home Premium and I downloaded Service Pack 2 from windows update.
  If anyone could help, I'd appreciate it, thanks.

  You will find assistance appropriate in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  NOTE: Read & guard this "sticky" before starting a new thread for help: http://windowslivehelp.com/thread.aspx?threadid=8a67c6f7-8a04-48d0-972e-1252034d6390

  Description of the update for Windows Server 2008 platform and Platform for Windows Vista update
  http://support.Microsoft.com/kb/971644

  QED: KB971644 "platform update" for Windows Live Essentials Wave 4 Beta or is there another? Looks like that same Windows Live Support does not know with certainty:

  CF. tried to install the new beta version of messenger, get a note telling me to get the latest update of Windows Platform (where support tells OP to ask for help in the Windows Update forum!)

  CF. platform Windows Update - can't see it!

  Search Windows Live Help forums on "update of the platform" also allow to get this thread (4 pages & culture) as a possibility: http://windowslivehelp.com/thread.aspx?threadid=f3145fce-81b1-405e-a40d-048245542d63

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft