Effect of hue with blending modes

Similar Questions

• My re-creation of lightsaber - difficulties with Blending Modes

  I'm reproducing the effect of lightsaber Phantom Menace. I found the following two frames:

  No dial-up power

  

  I then put my impact on this backdrop (left) and tried to get the same as real (right).

  My resources are Blending Modes, solid layers (hidden) and accelerated blur.  However, I can't do it.  The best that I have proposed is the following:

  

  The real similarity is very low, although they may look the same.  My problem is that I can't do what I want with blend modes. For example, notice how in the original version, the blue along the metal beam/band just behind the lightsaber avoids the wick around the white core - it stops here.  How did do that?  I discovered that more light color sort of realize that, but the blue eyes is so severely compromised.

  Is it possible to somehow COMBINE Blend Modes?  (to get the best of both modes)

  Please can you help

  Thank you.

  Harry.

  What basis? There are so many images posted that I do not know that which you are referring. In general, I use screen in 32-bit mode for effects of brilliance like this. I have to admit that, with the exception of a person showing how a light saber that I was never asked to produce a. I have for light sweeping all the time and they are exactly the same thing.

• Merge layers with blending modes

  I have a layer in a group with a blending mode and opacity.  During the merger of the group that a particular layer behaves as if the blending mode of the layer normal. I tried to place an empty layer underneath and merge down, like merging the layer with a blending mode and opacity in the empty layer even if this was not successful?

  Here are the steps I did:

  first screenshot shows my layer of mixture with the fracture mode at 60% opacity: I did a merge visible stamp ctrl-alt-shift-E to make this layer.

  

  I selected the merged layer, but I ctrl-click on the layer break to make my choice.

  

  Although I have him merge layer selected, I pressed ctrl-J to make a new layer for the selection and the merged layer:

  

  I can then turn off the visibility of the merged layer and the original layer of the fracture. This is not exactly the same, but it will be as close as you can get.

  

• Blend Modes ('bright light') in After Effects?

  I discovered that in After Effects CS6 (Win7) some blend modes seem to not work as expected.

  I have a bitmap with transparent above other bitmap and want to mix with "bright light" - but the result is the same, as if I had no merger mode at all. It is the same for 'hard light', 'linear light' or 'hard mix.

  Other blending modes like "multiply", "soft light" and "overlay" work very well.

  Does anyone have an idea what's wrong with my After Effects?

  If you imported the PSD file with the blending modes defined this way instead of PNG ones, AE should have created Layer Styles property group. Drilling down this ownership group reveals the property opacity of fill under Merge-> Advanced Blending Options:

  

  In order to correct your design created from PNG files, you must export the layer with 100% Fill first, and then you add any layer Style of the layer-> Layer Styles menu (or right-click-> Layer Styles) - that creates the layer Style group property of the layer. After that, you are free to manually delete or just disable the eyeball and enjoy working with the only blending Options property group.

• blending mode

  Hello

  I'm working on how I can make a picture appear through a filled shape, that I created in illustrator. I want the image in the background and appear through a colorful shape but keep the color of the forms. I played with blending modes, but I can't seem to get the desired effect. Any advice would be appreciated

  This link was also a good example in the 'on blend modes"with the circle example orange under the harsh light, blend mode is what I want to achieve, but I can not get the same result

  How to change the work using transparency and the mix of patterns in Illustrator

  Select the image directly and multiply the value for mode. Reduce the opacity to around 70%.

• Keyboard shortcuts do not work after changing the blending mode to a layer

  There is a strange bug that I experienced with photoshop. Whenever I change the blending mode to a layer (for example by selecting "Multiply" in the menu drop-down blending mode), my keyboard shortcuts stop working until I have click on the canvas again. It's annoying because often, I'll be on the Brush tool and I did draw on the canvas and press ctrl + z to re - activate keyboard shortcuts. I'm curious to know if this problem occurs to someone else and if anyone has found a solution for this.

  Version of Photoshop: 20150722r.168 x 64

  Operating system: Windows 10

  It happens on Windows, because the drop-down list with blend modes remains highlighted or active (around the blue line). You can press ENTER to confirm and delete the highest point around blend mode dropdown or use keyboard shortcuts to change the layer blending mode. To change the layer blend mode, you must have selected layer and then press Shift + Alt + letter for the blend mode. This shortcut does not work in the case where the tool you are using have mode option in the blending Options bar.

• Hue Blend Mode Confusion

  Hello

  Read on the blend mode of hue, I understand (perhaps wrongly) that, given two layers (T) op and (B) ottom, if the Mode of T mixture has Hue, then the information of hue in T will be mixed with the saturation and brightness in B, which means that the information of hue in B are replaced by information of hue in T. However, by running a series of experiments, I have noticed that when dealing with a very simple document consisting of two layers only, that affecting the tint also blending Mode changes the saturation and brightness.

  Here are the steps to replicate the phenomena observed using two regular layers:

  1. Create a new blank document.
  2. Fill it with the color that corresponds to the values (0, 70, 50) HSB.
  3. Add a new layer above the existing (Normal blending mode).
  4. Fill the top layer with the color that corresponds to the HSB (230, 70, 50) values.
  5. Use the Panel information, TSL values for the document he read (230, 70, 50).
  6. Change the blending Mode of the top layer of the hue.
  7. Use the Info Panel, the TSL values for the document should read (230, 70, 50), but rather to read (230, 66, 53).

  And here are the steps to reproduce the observed phenomena using a normal layer and an adjustment layer:

  1. Create a new blank document.
  2. Fill it with the color that corresponds to the values (0, 70, 50) HSB.
  3. Add a Hue/Saturation (Normal blending mode) adjustment layer.
  4. Adjust the value of shade in the properties panel for the Hue/Saturation adjustment layer at-130.
  5. Use the Panel information, TSL values for the document he read (230, 70, 50).
  6. Change the blending Mode of the Hue/Saturation layer to be dyed.
  7. Use the Info Panel, the TSL values for the document should read (230, 70, 50), but rather to read (230, 66, 53).

  The results in both (for me) are identical. Am I misunderstood the blend mode of hue?

  Thank you

  Matt

  Photoshop News: 13.0.1 x 64 extended

  OS: Windows 7 64-bit

  CPU: Dual Xeon E5440

  RAM: 16 GB

  Video: Nvidia GeForce GTX 580

  The mixture goes in a model STL.

  You make measurements in a model STL.

  In addition, change the hue by preserving the brightness and saturation sometimes would result in illegal values - and those who have to be cut back to valid values (while preserving hue).  This will result in changes in brightness or saturation.

• Blend mode: hue; any suggestions where this option?

  Following a tutorial on youtube a technique is mentioned to use for one color in another; Blend mode: Hue. Anyone know where this option is found in Photoshop Elements 6.0?

  Having not seen the tutorial, or other layer, blend modes

  or the paint tool, blend modes.

  

  

  MTSTUNER

• Problem with the screen blend mode

  Hello

  I noticed that the screen on my Illlustrator a blend mode problem, he does not let the color when the shape is black...

  Here is a screen for the explanation:

  

  (overlay = screen in french)

  I don't understand what is happening... ID do something wrong?

  EDIT: I use Illustrator CC (2014)

  What document color mode?

  In CMYK mode, you might want to try a (very) rich black.

• Layer masks and blending modes

  I read on the layer blending modes in Photoshop CS6: The Missing Manual, p.121.  They talk about setting exposure using the blending modes, and they show how to darken an image by using the following procedure.  (1) activate a layer, (2) create a mask of levels, (3) the blending mode of the layer to multiply the value.

  My impression is that blending modes change how the pixels on one level interact with the pixels on the next lower level; that is, it implies there are at least two layers of the image.  So I'm not surprised that if I have a single layer without a mask and I change the blending mode from normal to multiply, it is without effect, probably because there is no immediately lower level to allow interaction.  However, if I have a single layer and create a layer mask, then changing the blending mode from normal to multiply darken the image.  That must involve the pixels of the layer are interacting with transparent pixels on the mask.  What?

  Can someone explain what is happening in reality not here?

  Use layer blending modes, you need to the two layers less.

  As you mentioned above:

  '(1) activate a layer, (2) create a mask of levels, (3) the blending mode of the layer to multiply the value'

  step 2 means create a levels adjustment layer that comes with a default mask if you want to make local adjustments.

  in this case, if you have a layer and add an adjustment layer, it works as if you duplicate the layer.

• the blending mode does not work.

  I'm trying to fix my exposure on a clip using blending mode and you want to do.  I copy the clip and drag it to a higher video track.  I click on the second piece (over the original) and go to effects.  I select darkens or multiple of the blending mode drop down, but nothing happens.   No matter what I select in the dropdown menu, nothing shows no change.  The opacity is 100%.  the FX is on.  If I take other effects on them, but not the blend mode.  I'm totally confused.   It works perfectly earlier today.   could, I changed a parameter in any way without realizing it?    I can't understand.   deep sigh.

  Travis

  Is the icon 'eye' on this gray track (active) or blue with a slash (inactive)?

  

  Neil

• Blending modes within several compositions embedded layer - please help?

  I have a main composition that contains multiple embedded compositions.  Fairly typical workflow.

  Let's say that the main composition is called 'main_comp' and one of my embedded compositions is called "comp_A".

  In comp_A, I have a solid layer of black with a lensflare effect applied.  I have this set to 'Add' blend mode layer, so that all the black pixels are ignored.  This allows all images under this lensflare layer to show through.  This set works very well in comp_A.

  I integrate comp_A into my main_comp.  The 'Add' on my lensflare layer blending mode displays more correctly once inside main_comp.  The layer makes it totally opaque block anything in the main_comp below.

  I hope that makes sense.  If someone has the time to help, I can provide more information if necessary.  Thanks in advance.

  Press the "collapse of transformations/continuously Rasterize" for comp_A in your main comp - who could do.

• Graduated filter blending mode

  I apply a-2.00 exhibition on the graduated filter tool in Camera Raw and it looks like the blending mode has Darker or multiply instead of the normal.  The dark areas to fall a black mess instead of just become progressively darker.  Anyone know why this is happening?  I use a new installation of CC.

  The adjustments that you program in the progressive filter have the greatest effect at the beginning of your selection and decreases gradually throughout the area covered by the progressive filter. If you have areas that are too dark, you can use a brush that is selectable from the progressive filter Panel to erase or lighten the effects in specific areas.

  

  As shown here, the brush with the "-" is selected which means the brush will remove the effect of the brushed area. You can set the bit rate so that as you brush it only partially removes the effect.

• bug in blending modes

  I want to report a bug in the first Pro CC 2014 program. He appeared in the CC version.

  bug in blending modes

  Compound

  Arithmetic
  Composite

  whenever a same

  Describe a situation in which there is this bug

  I apply a preset, none of these effects, or similar so that the clip is mixed with itself the blend mode screen. so very gently, I increase the brightness of the image.

  and sometimes, there is a problem. clip is not mixed with itself at the same time. but with a lag. It turns out that the image becomes lighter, but double, mixed two different images.

  strict laws, I did not reveal.

  but more often the bug occurs when the pliers cut already applied effect. or when the effect is applied to the clips that are not on the first track. or when the effect is applied to multiple clips at once.

  I found a solution, but it is not very convenient.

  If you go to the dropdown menu with the track names and select the same track, the bug goes away again.

  for example, we had chosen the "video 1", we once more choose "video 1" and everything is ongoing, as it should. "

  Sorry for my English, I'm Ukrainian.

  (and sorry for marriage too)))

  

  

  

  Yes, this problem occurs spontaneously. not found any clear trend.

  I have change a proxy API 1080 * 1920 25 fps. the same thing with the mov files that I use Canon dslr

• AS3 Blend Modes

  Hi all, I am applying the screen blend Mode to a Clip.  I know how to do it using the properties panel, if the clip is on the scene, but I need to do this only with Actionscript 3 and I'll have difficuly to find how to do it properly.

  I have another object which is a PNG file that I load into the swf file behind Object1.

  var object: object_mc = new object_mc();

  var imgLoader:Loader = new Loader();

  var url: URLRequest = new URLRequest ("box.png");

  imgLoader.load (url);

  addChild (imgLoader);

  imgLoader.x = 0;

  imgLoader.y = 0;

  addChild (object);

  BlendMode.SCREEN; This produces no errors, but does not apply the effect.

  Object.x = 6;

  Object.y = 6;

  Any help is very appreciated,

  Thank you =)

  And you can always use:

  object.blendMode = BlendMode.SCREEN;

  With the assistance of the property of the static class helps because the compiler can check. If you did something like:

  object.blendMode = "Screen"

  It may or may not work, but the compiler could not tell you that it wasn't supposed to be capitalized.