Effect of scrolling Jigsaw prevent the user to be able to move to the next item

Similar Questions

• in the vertical page with scrollable content, I have can´t by scanning to the next item. Why?

  in the vertical version of the page with a picture of scrollable content, I have can´t by scanning to the next item. the scrollable content framework has, in both versions, the exact size of the page. in the horizontal version, it works perfectly. Used folio builder v22, pdf and smothscrolling off.

  Post edited by: dps loss

  Thanks for the reply. But I discovered that it was my fault. A status of an object is outside the scrolling of content. But thank you for the opportunity to ask questions.

• Go to the next item in the Datalist (button)

  Helle

  Everyone discovered how to make a button that links to a datalist and tells control datalist to proceed to the orders of the day? I'm away until doing a scroll bar with just a left - and right-click, no lead or thumb, but now only left button works, the right doesn't. The right button works only when you hold the button down, then after a while it goes to the next item in the datalist.

  Any thoughts?

  Greetings from Holland, Koen.

  You'll want to select your scroll bar, and then click Properties, then the component. Then replace "maximum" by the number of items in your list of data and then change the size of the stage in 1.

  

  Hope this helps

• How to select the next item in a table view?

  Hey,.
  I want to select the next item, but I have no idea about it? have you any suggestions?
  for example:
  the second element is currently selected, I need to select the third in my code, how can I implement this feature?

  private IntegerProperty index = new SimpleIntegerProperty();
  
      public final double getIndex() {
          return index.get();
      }
  
      public final void setIndex(Integer value) {
          index.set(value);
      }
  
      public IntegerProperty indexProperty() {
          return index;
      }
  

  Get the selected item:

  table.getSelectionModel().selectedItemProperty().addListener(new ChangeListener() {
  
              @Override
              public void changed(ObservableValue observable, Object oldvalue, Object newValue) {
                  Person selectedPerson = (Person) newValue;
                  setIndex(data.indexOf(newValue));
  
              }
          });
  

  Select the following index:

  table.getSelectionModel().select(index.get() +1  );
  

• How to cause a loop to move to the next item in the loop?

  How to cause a loop to move to the next item in the loop? cfbreak leaves whole loop I want

  < cfloop condition = 'i' less THAN or EQUAL to #ArrayLen (arrData) # >
  
  <!-we need filter so the uplaod problem lines does not crash '->
  < cfif not REFind ("^ [0-2] [0-9] [/] [0-1] [0-2] [/] [1-2] [0-9]" {3} $", arrData [i] [1]") > <! - treat date - >
  loop jump the agenda (IE i ++)
  < / cfif >

  Thank you

  does not the loop move on to the next item in the loop, it mearly incraments var I.

  is actually the loop switch the order of the day. It's inevitable, because I is the loop index.

  In any case, as others have suggested, you can skip the history quite i. Just follow your instinct and code it directly as you feel.

  I want to check each line but if there is a mistake in any column in the same row I want to ignore the whole line

• Can't drag to the next item on chassis scrollable?

  Hello

  I don't know what is happening here. I have a page with a scrolling frame that covers the entire page, frame is set to scrolling, scrolling direction is vertical only. I just updated the content of drop-down and now when I go on the iPad, I can't drag to the next article, the blow to the next article worked great job yesterday, all the content and links OK I can't off the page now... any suggestions?

  Hi team - rediscovered this thread who have had similar problems. I have an additional tip, that I discovered.

  I have a series of articles, each consisting of a scrolling text box containing anchored on a vertical arrangement art works. The scrolling text box takes about 90% of the page - with a header over her thin running.

  I found that I was unable to move right or left for the next article on some pages, but not on others. To clarify, the model is exactly the same for each page. So why the difference?

  What I discovered, it was on some of my boxes of text scrolling, anchored work place shadow or outer glow that caused his sitting slightly outside the bounds of the text box in which they were rooted.

  With the deleted shadow or work adjusted so that every part of it mounted inside the frame, hey presto! Everything worked.

  It took me about 7 hours of work, and I had hardly incredibly angry at all.

  I hope this can help someone!

• How to automatically scroll constantly on the next page to muse Adobe?

  Im a construction site that was originally going to be a page scroll site but I now what to place the various sections on individual pages to allow easier mounting of the content. I still want the look of the site as if it were a continusly a scrolling page site. What I was hoping to do, is that when the viewer comes at the end of a section, they can continue to scroll down, but for him to link to another page, I thought that this could be done by using anchors in a certain way. Any help greatly apprciated! Thank you

  Yes...

  You need what is called a "Snap scroll" widget... these widgets use anchor points as a brake to stop right where they are while hitting swipe or scroll... it will be not until the bottom of the page your shot or make scroll again... This will repeat for all points on the page anchor...

  MuseThemes make one called exactly that... worth to buy their big toolset for MUSE... highly recommended...

  Snap Widget Scroll for Adobe Muse CC - Widget Tutorial by MuseThemes.com - YouTube

  and one free here of Joseph Angelo Todaro

  Adobe Muse CC Parallax Scrolling tutorial | Magnetic roller anchors - YouTube

  see you soon,

  GEM

• How to move to the next item of selected in a list.

  * Edition *.

  I was wondering how I could make a button that would move the currently selected item to another in the array in a List component. I would think to do so through of ACE or an event, but I only am not sure what I have référenceriez under this component. Help would be appreciated, thanks.

  You can set the selectedIndex property. What next button increments the selectedIndex property.

  If (list.selectedIndex< list.dataprovider.length="" -="" 1="">

  list.selectedIndex ++;

• Auto scroll to the next part of page with mousewheel

  How can I get an effect of scrolling like on this Web site: www.wazala.com?

  Here, I need only to scroll with the mouse wheel and it automatically takes me to the next part of the page, without clicking on the anchor points.

  In Muse I could only somewhat simulate this, but using clickable links to the anchors.

  I don't want to use clickable anchors, only the mousewheel.

  I want to rebuild is something like this:

  http://pexetothemes.com/demos/story_wp/#1

  Here, the effect of scrolling is used too, but also photos are all full-screen. If I add the fullscreen-diashow-widget, that it doesn't let me scroll vertically to the next photo, as in the link above, also it only changes the image, but I can't scroll down to see the rest of the content of the Web page.

  So, how do these effects:

  -Make scrolling with mousewheel and get off at defined place

  -How to create this effect, where I scrolling with mousewheel and puts not only the image full screen, but also the text and content vertically with it?

  
  

  Does anyone have an idea? Thanks in advance.
  

  As the post I mentioned, said that's not possible with the current version, you can try to use a custom script to communicate with someone who can write for you.

  We invite you to add your suggestion to our section ideas for further consideration.

  Thank you

  Sanjit

• How to stop the next email to open automatically when I delete email open current?

  If I have an open e-mail and I use the button Delete, the next email automatically opens. Is there a setting I can change to stop this?

  I guess you are talking about the Windows Mail program, and that you opened the message in its own window by double-clicking on it. If so, the only way to prevent the next message to open automatically when is to delete the current message to close the current message and then delete it from the message list pane.

   

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  "MikeyG666" wrote in the new message: * e-mail address is removed from the privacy... *

  If I have an open e-mail and I use the button Delete, the next email automatically opens. Is there a setting I can change to stop this?

  Gary van, Microsoft MVP (Mail)

• Save the record before moving on to the next line in the data block

  Hello
  
  Form 10g, I have a block of retail, in the block of retail, I want the user first save the current line and then move to the next line, in the validate_record trigger, I checked the system.block_status = new but its does not work and the user is still able to move around the lines below without saving it in the upper rows.
  
  any tips?

  Ouadi wrote:
  Hello

  Form 10g, I have a block of retail, in the block of retail, I want the user first save the current line and then move to the next line, in the validate_record trigger, I checked the system.block_status = new but its does not work and the user is still able to move around the lines below without saving it in the upper rows.

  any tips?

  Yes. You can make commit automatic when changing the line.

  When-new-folder-instance trigger writing

  commit_form;
  

  I hope this helps...

• How to move to the next component?

  Dear friends,

  Can someone tell me how to move the focus to the next item in the screen. In fact, I have a verticalmanager with verticalscroll this Manager of vertical field consists of the field with about 100 rows of data. Below this vertical field Manager, I have a single button. If I want to move this button means that I have to go through all these 100 lines in this edit field. It is in any case to move the focus to the button directly by clicking the single button. If you have an idea to solve this problem pls help if you can please give me some code snippet.

  Kind regards

  s.Kumaran.

  You can use setFocus to set focus on a certain area. How you trigger it is your choice, you could, for example, use enter or alt + key. Use keychar or keydown for the management of keys.

• The effect of scrolling has changed

  Hello

  I am a user of Lausanne, hope you understand my problem.

  

  "pour that scrolling effects can be enabled, your page must Aperta a single breakpoint fixed"

  Google translation:

  
  

  '' le scrolling the effects can be activated, your page must have a single point rigid stop. "

  Does it means that we can make that a single fixed point the effect of scrolling?

  This is an example with a lot of objects scroll on our old site:

  http://www.gawson.com/shop.html

  Please us heeeelps =)

  See you soon

  Scrolling effects has not changed at all. But cannot use the fluid pages with more a breakpoint at this time. This will be possible future updates.

• Opacity of the effect of scrolling don't DO NOT WORK at all

  Hello

  I downloaded a CC of Muse 2015 model. I use Muse CC 2015 and that you have installed all updates. The model has scrolling inside opacity effects. Look at all to implement the fine. But once I have edit items (such a simple rectangular shape) or add an element (for example, a text box) the effects of scroll opacity stop working or do not work. It is used for a 'Tabbed Menu. So when a user scrolls down, looking like a menu to main menu appears for navigation, pretty standard. It of completely infuriating... and no sense.

  Figures, thought to it after that I have this post. Items need to be pinned. For some reason, they become desepingles to edit...

• Prevents the graphic update/scrolling

  Hello

  I have a VI where periodically I have to prevent the permanent table scroll. The scroll rate is excessively high and I can't seem to stop or slow down at least. Currently the graphic entrance is connected to a business structure that allows to choose between acquiring data or by using a default value. Using the event structure is not possible that the section is incorporated in a while loop and a part of a larger application.

  Thank you

  I agree with Norbert B & altenbach

  That's how did briefly,