Effectively to the release of this data, do not want to use assessment

Similar Questions

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• The section start programs frequently used on my disappeared from the menu. The line previously at the top of this section is not there. This happens only on my account. other accounts are OK. How to restore this function?

  The line previously at the top of this section is not there. This happens only on my account.  other accounts are OK. How to restore this function?  IAM operating under an administrator account.  Sailor

  Hello GENEVIEVEWIESENER,

  Thank you for visiting the Microsoft answers community.

  The most likely cause is Corruption of the user profiles.

  Here is an article on damaged the copy of your data in a user profile to a new profile.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Live Mail: One or more of the pictures in this message could not be found

  Normally, I can receive, view and send on, almost all images, photographs and videos that I receive. However, on some occasions and I don't know why it is, I get the following warning Message:

  One or more of the pictures in this message could

  not to be found. When you send this message these

  photos will not be included. Are you sure

  for sent this message?

  YES NO

  I do not understand that at all and I'm not a computer guru, I'm just an old guy who tinkers with his computer and tries to stay in touch with the family. If there is someone who can help me understand this, don't forget, keep things simple and use the word which I can understand. As I said, I'm not a computer guru.

  Thanks for any help in advance.

  Bill

  [Original title: Windows Live Mail]

  One or more of the pictures in this message could not be found...

  It is a painful bug that affected some users of Windows Live Mail since the release of version 2011 in 2010. It happens because the program stops to be able to make the connection between the placeholder image in the body of the message and the attached file. It happens that some incoming messages, including those who have at some point crossed a server AOL, some which were composed in Word, some which came from an Apple computer and so on. Despite having requested and received thousands of examples, support staff have never cooked with an explanation, never forget a cure.

  A search for your error message produced something like 200 discussions on this problem in forum Windows Live Mail. The only reliable solution is to click on the bottom half of the Next button and choose forward as an attachment. This will send the message exactly as you received it. It requires that the recipient can open the .eml files.

  If not, right-click on each image in the incoming message and select record under to save the image on your computer. Then, when you write the forwarded message, remove each image and use the option of the single photo on the Insert tab to insert the image you saved.

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Laptop HP 250 G2: the drivers for this device are not installed. F0Z43EA (code 28) - #ABT

  Hello

  I get this error:

  The drivers for this device are not installed. (Code 28)

  model: HP 250 G2 Notebook PC

  Model number: F0Z43EA #ABT

  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  How I solve the problem?

  thnx

  Hello:

  You need this driver for the card reader:

  Download and install the driver first on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message "revocation information for the security for this site certificate not available. Do you want? [Yes] [No] [View the certificate]

  For awhile, I got the dialog box with «security alert "revocation information for the security for this site certificate not available.» Do you want? [Yes] [No] [View the certificate] ". » I know that many, if not all, sites are OK because I used them several times in the past.

  I tried different "fixed" found by Google "revocation information" and nothing solves the problem - what is.

  When I try to make various updates, not related to this problem, I can not download updates due to a security problem.

  Suggestions for a computer challenged the user? Thank you.

  Richard

  http://www.brighthub.com/Internet/Security-Privacy/articles/82291.aspx

  read this, see if he can address your question.

• "The BIOS in this system is not fully ACPI-compatible" Stop: 0X000000A5.

  BSOD

  My home computer is running running windows xp for about 6 years... everything was OK until yesterday when I tried to turn it on. First it started as it does if she didn't close properly and got stuck in the loop of reboot that I did what I read on the forum... tapping F8 key and disabled the auto restart and I got the BSOD.

  It is said... the BIOS in this system is not fully ACPI-compatible... I do not understand the BIOS or ACPI

  The error message says:

  STOP: 0X000000A5 (0 X 00000011, 0 X 00000006, 0X00000000, 0X00000000)

  He also tells me to go to a website of material for a BIOS updated... but I do not understand what to download.

  Can someone please help?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/831691

  Check if that helps.

• Error code 28: the drivers for this device are not installed for Ethernet controller

  Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

  I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

  Hi jhawkerchic,

  1. What is the number of brand and model of your computer?

  To resolve this problem, you must install the latest version of the drivers for the device.

  You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

  You can see the following article for more information about the error Code 28:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The drivers for this device are not installed. (Code 28) for the ALL-IN-WONDER RADEON 7500

  I ran a windows update and a hardware update for ALL-IN-WONDER RADEON 7500 was available. I wasn't sure what it was, but I did research some information about drvier... or windows hardware and device driver has informed me that it detects what device(certain hardware) I have on my computer to install the update. (I don't know if it's true) anyway, since then, when I start my computer, the 'new hardware found' window. After investigating on I found it cause the ALL-IN-WONDER RADEON 7500 (I don't think I know what it is). There was my this info in my device (6 times) Manager: its an unknown device located in the ALL - IN - WONDER RADEON 7500 and it states that "the drivers for this device are not installed. (Code 28) "what is it and how to fix it." I don't know if I'm to disable or uninstall. As I said, these updates I got Windows update manager and I'm guessing that it was not successful.

  That is, what it does and how can I solve this problem?

  Thanks in advance

  Try to go to this link which is AMD and download the drivers for it.

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.5&product=2.4.1.3.14.3.2&ContentType=GPU+download+detail&OSType=Windows+XP+-+Professional%2fHome&keywords=&items=20

  The question to be a tunner TV that you have installed in your computer that is missing the drivers at startup. You receive the error because when your computer starts, it loads this device to make it ready for use, when you want.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Black screen - try to activate the controller PCI of communication Simple: the drivers for this device are not installed. (Code 28)

  Original title: Safe Mode

  Can run my computer only in Safe Mode, whenever I try to boot into normal mode I get a screen with lines on the subject. Cannot download even the peak "white screen" now.

  Any help will be greatly appreciated. Thank you.

  New: I get his message when trying to activate the controller PCI of communication Simple:

  "Windows has enabled this device, however, this device still does not work correctly."

  Then:

  The drivers for this device are not installed. (Code 28)

  To reinstall the drivers for this device, click on reinstall.

  Then:

  "Windows cannot find the driver for your device".

  Get you the drivers accessing a site Web on your computer or the manufacturer of the graphics card > Search a drivers and download article > search your computer or your graphics card model number > your operating system > drivers for it: either video / graphic / Chipset (according to the label)

  See you soon.

• try to download the audio book gives the error "the version of this file is not compatible with the version of windows your race."

  frustrated, the overdrive software download player!

  I tried everything I can think of to download this audio book. whenever I try, I get a message error that says "the version of this file is not compatible with the version of windows your race. check the system and see if I need a 32 or 64-bit and contact the software publisher. "or something like that. I downloaded the overdrive media console software, but every time that I try to download an audiobook, it gives this message. I tried to change the settings with the "use an older program with this version of windows' software overdrive console in Control Panel with no luck. Anyone have any suggestions. I need help please!

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• Error message Officejet Pro 8600 Premium that the drivers for this device are not installed. Code 28

  Printer : Officejet Pro 8600 Premium. model CN577A

  OS : Microsoft Windows 7 Home
  Base-64

  How your product is connected to your PC? : Network

  Description of the problem : in the Device Manager I have an error message with the

  OfficeJet pro 8600 icon - "the drivers for this device are not installed.

  (Code 28)

  There is no driver selected for the item or a set of device information. "I have

  have uninstalled and reinstalled the driver without result. The printer

  seems to work fine.

  Hello

  Yes, I would also suggest a new re-installation of the software.