Effects of text on the fly

Similar Questions

• Update RingText.Text on the fly

  Hi, I have a ring I want to use as input and control as an indicator. According to a mode of operation, the user selects either a ring or this value is selected by the program itself.

  I try to achieve this by using the RingText.Text property node. While I can't read very well, when I write to her like that

  

  the value is not updated: I expect to see 'None' written in all the controls in the ring above but instead they retain their previous values.

  Can I do this at all?

  Thanks in advance,

  Peter

  Hi SenSLabs,

  I think that something like this would do the trick:

  

  Kind regards

• How to get the text have the same effect as the video?

  Hello

  For the first time post here, but I wonder how to get the text of the titles have the same effect as the video behind her.

  For my video, I use 'bad tv' and other effects such as Gaussian that obviously changes the appearance of video, creating the look of VHS. However, I then inserted text via the title, but it normally appears. How can I make this text have the same effects as the video behind it?

  A friend told me I might need to add text to the video first, then do the effects, I have not tried, but wonder if there is an easier way, as this would require me to restart.

  EDIT: That's what I'm looking for. https://youtu.be/7_2PHQI89dI?t=24s The text has the same effect as the video.

  Thank you

  One way is to create a clip made up based on the title and the original clip. Then apply the effect.

  Another way is to use an adjustment layer.

  Good luck.

  Russ

• Hide the shadow effects of the text (on the other) while keeping the editable text...

  There are two editable texts (unrasterized/editable)... The two applied shadow effects... They are very close together, so the shadow effect over top of the lower layer on layer.

  What should I do to hide this shadow while keeping the two editable texts?

  Sorry I'm not that good at English, please ask what information I should I provide in addition to the problem...

  Thank you, Vish.

  Group the two layers turn off the shadows on the layers and add the style to the group.

  

• Glow internal change position of text effect when used with the State of the button.

  I've seen other old discussions on this topic.  I'm trying to use the inner glow on the mouse down state of a button.  When you apply the inner glow effect, the text is pushed down into the text box to the position that it is in normal state and the substitution of the.  How to do this?

  Attached images show the a screenshot of what the mouse to the low State looks like muse with the glow effect used inside.  The second screenshot shows the real effect with what is really happening by using the preview of Muse (the same thing happens in Safari and Firefox).  The metrics of positioning between normal / roll the mouse downwards and above are identical.

  Help, please.

  

  

  To work around this problem, the simplest method is to add a shine to other States, but use the background color for the glow. This creates the same offset as the rollover State but does not display differently.

• the effects of text

  I'm starting to gret base AE suddenly. I have a question on the effects of text that I have no problem, add effects to a layer, but I was curious on how I can add both a bustling in and animate the efect on a piece of text. Unless I'm mistaken, that I dragged one indeed but when I drag an effect off can't do both to display.

  I am referring to text stock effects in AE sure hope this isn't a stupid question and it is possible that I have will understand this as I do but any help appreciated.

  RD

  First, an important element of terminology: the things you add to text layers are not effects. They have preset animations. There is a pretty big difference. Here are a few pages that give the basics of each:

  "Overview of the effects and resources."

  "Animation presets overview and resources."

  "Text preset animations.

  One of the important differences (and the reason I'm highlighting the issue of terminology) is that the preset animations are nothing more than collections of properties and keyframes for the standard layer properties. In other words, you can make the preset animations and - to the point - changes the results of them after that you added to the layers.

  So, don't think that with regard to the addition of a stock animation preset, and then another to get compound results. Apply one, discuss its findings, cancel, apply another and discuss its findings, instead, and so on. Learn how to build your own complex animations by examining how the animations in the predefined animations are implemented.

• How to make the text in the header change with scrolling effects?

  Im trying to do a header which changes when you scroll the page. I know how to make the text scrolls and back according to the key position, but his does not work if my key is less than my position of text on the page.

  Ideally, I would like to get so that I scroll to the area of 'Wine', the previous header will slide out and 'Wine' will slide in from the left.

  Any ideas?

  You can try these:

  http://musewidgets.com/products/Parallax-list

  http://musewidgets.com/products/three-box

  Thank you

  Sanjit

• CS5 - most effective way to wire and independent streams of two blocks of text in the same document?

  Greetings...

  I am responsible for creating a 100-page instructor guide and I looking for a little guidance in the use of independent text blocks that thread the length of the document.  The idea behind the use of two columns, is that the first column (left) must be used for the notes 'instructor-only', advice, etc..  The second column (right) should be used for the text of the student guide.  Two columns (or blocks of text) would need to move independently of each other.  In other words, when the left column is filled with text placed on the page, the flow of additional text in the left column on page two, left column on page three, etc.  Same thing applies to the right column.  There is no link or thread of the text between the two columns on the same page.

  I tried to reproduce this in a two-column table format, however, the table row height is limited and overset text will not continue the table in the block of text on the next page.

  Thank you in advance for your help!

  Set up master page text frames.

  If you use facing pages, put on the student to the student and executive trainer instructor on master pages.

  Be very careful when your document is redéroule however. Take a look at this discussion, we had recently on the subject:

  http://forums.Adobe.com/message/3588735#3588735

  HTH,

  Substances

• Cannot add layer markers on the fly with Mac laptop

  I tried to figure this out for hours now! I'm on a Mac laptop Intel Core 2 Duo running 10.5.6. I use After Effects CS3 Professional. All I want to do is RAM preview audio file from within a composition and Add layer markers on the fly. Apparently, it's easy with your desktop using the keypad. I remapped the shortcut in the preferences text file so that "Add a reference" is now F12 - nice and easy! (and no, this is not in conflict with the dashboard OS shortcut - I disabled that). Anyway, I tried a number of other institutions. The problem is, no matter that the shortcut, when I try to add the guide layer with the shortcut, the file stops playing! So annoying! I want to add a number of landmarks of layer timed to the rhythm, but whenever I do damned RAM Preview stops! I can't mark important points in the composition! Any help would be appreciated...

  -Bryan

  People have used cobblestones digital external (not full keyboards) to work around this problem with the new MacBook Pro keyboards. There is even an iPhone app that turns your iPhone into an external numeric keypad.

• How can we separate "Icons and text" of the browser control buttons (back, forward, etc.) since the icons on the toolbar of the add-on?

  With us, it is not a problem. I don't know why it's different here at work - even editing, same settings (as far as I know).
  Windows Vista
  Firefox 7.0.1
  Status 4 Evar installed to activate the add-on bar in a status bar

  I have a NoScript module icon in the corner, which works very well. If I add a GreaseMonkey icon in the menu customize, "Icon and the text" is displayed for this icon as the icon and text browser controls (home, stop, etc.). Other icons the module show icon and the text (S4E, for example). NoScript is the only one I've found so far that collapses down to just an icon.

  I like this leads to the bar having a higher status (add-on). Basically what I want is for only the icon is displayed in the State (toolbar Add on), while keeping icons and text in the browser controls. My current solution is simply to remove the other icons of the add-on - it from the status bar (add-on), but which removes the ease of turning on/off and setting options.

  Please tell me if I can provide you with another thing and thanks for your help.

  Edit: I have some screenshots to show what I mean.
  desired behavior
  problem when the icon is added

  I tried, and while it does not remove the text, buttons retain their width, collapses don't not down icons. I was able to get exactly the effect I want to by changing the setting in the DOM, as stated in my post above, but which only lasted as long as the session and returned to the way it was before, when I restarted Firefox.

  After a few tries, I finally joined the userChrome following tweaks. This tweak sets the buttons didn't use any text, be limited to 20 pixels of width, and, if a drop-down list arrow is present, to hide that. Greasemonkey uses a drop-down list item separated so it must be hidden specifically.

  #addon-bar .toolbarbutton-text { display:none !important; }
  /*The following work for most of my icons except Greasemonkey*/
  #addon-bar .toolbarbutton-menu-dropmarker { display: none !important; }
  #addon-bar .toolbarbutton-1 { min-width:20px !important; }
  /*The following are specific to greasemonkey*/
  #addon-bar .toolbarbutton-menubutton-button { min-width:20px !important; }
  #greasemonkey-tbb > dropmarker {  display: none !important; }
  

• 4462 PCI gain is editable on the fly in VB 2005 express?

  Hello

  My current setup of chanil comes from shape:
  myTask.AIChannels.CreateVoltageChannel (physicalChannelComboBox.Text, "", _)
  AITerminalConfiguration.Differential, Convert.ToDouble (minimumValueNumeric.Value) _
  Convert.ToDouble (maximumValueNumeric.Value), AIVoltageUnits.Volts)

  Where 'physicalChannelComboBox.Text' = ' Dev1 / AI0:3.

  This creats all channels at the same time, but I need to have different voltages, Min and Max.

  This is a MAX 4462 configuration.

  I'm doing this configuration in VB

  MajorVersion, MinorVersion DAQmx]

          8       6       [DAQmxChannel]          AI.Coupling     AI.Max  AI.MeasType     AI.Min  AI.TermCfg      I.Voltage.Units ChanType        PhysicalChanName        PPI2/PrimaryVolts       DC              42      Voltage -42             Differential    Volts            Analog         Input   Dev1/ai0        PPI2/PrimaryCurrent     DC              0.316   Voltage -0.316          Differential    Volts            Analog         Input   Dev1/ai1        PPI2/SecondaryVolts     DC              31.6    Voltage -31.6           Differential    Volts            Analog         Input   Dev1/ai2        PPI2/SecondaryCurrent   DC              0.316   Voltage -0.316          Differential    Volts            Analog         Input   Dev1/ai3        [DAQmxTask]     Channels        SampClk.ActiveEdge      SampClk.Rate    SampClk.Src                     SampQuant.SampMode      SampQuant.SampPerChan   SampTimingType                                  Rising                  195000          Continuous Samples      2000                            ""                              Sample Clock    PPI2    PPI2/PrimaryVolts, PPI2/PrimaryCurrent, PPI2/SecondaryVolts, PPI2/SecondaryCurrent[DAQmxDevice]   BusType DevSerialNum    PCI.BusNum      PCI.DevNum      ProductNum      ProductType     Dev1                    PCI             0x127B518               0x5             0x6             0x7170  PCI-4462
  

  I wish I could watch the values of data in time and change the gain/rainge of each channel while he was still recording data. How can I change the gain on the fly.

  Thank you.
  John

  Yes, it will work.
  Remember that you cannot change AI Min and Max during execution of the task.
  Well well... unless you will not see a difference when running

  Gavin Goodrich
  Software engineer
  National Instruments

• integrate image and text in the report

  I'm doing a label with a logo at the top left, a chart on the side right (an arrow indicating the direction of flow)

  and the text in the body of the tag, so far without success. I tried to use the generation of report vi s to achieve this, but it seems that just the 'standard' reporting rather than on a word one (no Office product on the computer, has no... Works, yech!) limited considerably, although I do not know how the do with the ability of Word template, although I suspect that would make life much easier. I really don't understand what can do the "standard" report When I set the alignment of the Image to add to the report, there is no effect on the placement of my graphics. In addition, it is an addition, which means that I find myself with the image on a label, the text on the other. I want to do is have them both on the same label, the Logo above and the arrow to the right of the text.

  I tried a lot of things, including using the generation of reports "Append façade image" and make a cluster that has been written to fill all of the panel before visible, but it was printed distorted and small, similarly Append control image.

  The printer is a usb Zebra TLP3842

  LV_Pro,

  As FAS so I understand it, the alignment entries apply only to HTML format, so they do not affect the Standard reports.

  Try to put your logo in the header of the standard report.  Then on your front, create a tab control, where you place your text box and graph of arrow in the direction you want to print on the page.  Make the background of the transparent tab control and add the image of the tab control to the report.  I think that it will be justified to the left little matter what you prefer, so play with the size and spacing of everything until it comes out looking how you want.

• Not find search text in the source code files

  If I rename a .vb in .txt or .sql file, I CAN find the text in the file by using a not indexed search, but if I do not rename the file, simple text search CAN NOT find in the file as a "create table" or "function".  This behavior is pretty useless for a developer.  Is there a way to do this type of research, or any kind of utility "Find Classic" that works like Find in XP?  Thank you.

  Here's a FAQ on the incidence of indexation and research: http://windows.microsoft.com/en-us/windows-vista/Improve-Windows-searches-using-the-index-frequently-asked-questions.  You should read the article in full - it is instructive on how research occur in Vista which is very different from how they were in XP.  It includes how to add files and locations to the index.

  To search for the folder C: whole disk in Vista go to start / search and type in ' or '. As you type, you'll see two hyperlinks appear just above where you type and we'll search everywhere.  A click on it.  Who will do a fast indexed search and bring up a dialog box.  Click on advanced search.  Click the drop-down location and find the C: drive and click on it. Check the box "include not indexed, hidden and system files (might be slow).»  Then click on search.  You will now search your entire hard drive to the specified file.  And Yes, this isn't a very effective way to search the entire disk for a file but it is how it is done in Vista.

  Here are some tips on how to find files (and the page includes a number of hyperlinks to related articles while doing the research you can also consult: http://windows.microsoft.com/en-us/windows-vista/Tips-for-finding-files.)  There are also a lot of links to other articles on the research of Vista - but not as good as this.

  I did a search for a character in my book, and each project book came to research (well most of them - all fit in the list without go advanced).  This is because the files .doc, .docx, and Documents are all included in the Index.  I think that if you add .sql and .vb and the location of your files, you'll be able to search by content as well.

  I hope this helps.  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Remove the shadow of the text under the icons

  I am currently using Windows 7 Ultimate.
  I configured the classic windows desktop theme with a solid white background.
  I see the text under the icons on the desktop in white with a shadow.
  How can I configure the text under the icons to be simply black, wihtout all
  shadow?
  I see the same problem, even using the other background full screen colors...
  Should what setting I change?
  Concerning
  Marius

  Look in the performance Options, as the cloak is controlled it.

  1. click on start, type Advanced in the search box.
  2. in Control Panel, click view advanced system settings.
  3. in the performance section, click the [settings...] button.
  4. Select the Visual effects tab.
  5. click on the parameter shadows down usage labels icon on the desktop .

  -Christmas

• In a calendar of events how can APEX 5.0, I show an image (png or gif) next to the text of the event

  I use APEX 5.0 with theme 42 when I created a calendar of events using a view. When I try to add an image to display with the text of the event, the path of the image is displayed with the text of the event instead of the image next to the text.

  Appearance of the image is conditional and added in my Select statement.

  Select the YEAR

  FILE_NBR,

  Decode (COMMISH_ATTEND, 'YES,' ',' < img src = #WORKSPACE_IMAGES #"ALPHA.) PNG "height = width = 10px 10px / > '). EVENT_NAME |  as EVENT_NAME,.

  CASE

  When CONFIRM_DATETIME is null then: "apex-cal-yellow."

  When CONFIRM_DATETIME is not null then 'apex-cal-lime.

  end as css_class,

  ASSETS

  of EVENTS_V

  The calendar of events returns the image with an unescaped tag.

  

  How can I change the "Display column" attribute by default to allow an image to display?

  Thank you

  Ron

  CDInoon wrote:

  I use APEX 5.0 with theme 42 when I created a calendar of events using a view. When I try to add an image to display with the text of the event, the path of the image is displayed with the text of the event instead of the image next to the text.

  Appearance of the image is conditional and added in my Select statement.

  Select the YEAR

  FILE_NBR,

  Decode (COMMISH_ATTEND, 'YES,' ',' '). EVENT_NAME |  as EVENT_NAME,.

  CASE

  When CONFIRM_DATETIME is null then: "apex-cal-yellow."

  When CONFIRM_DATETIME is not null then 'apex-cal-lime.

  end as css_class,

  ASSETS

  of EVENTS_V

  The calendar of events returns the image with an unescaped tag.

  How can I change the "Display column" attribute by default to allow an image to display?

  There is a security setting of region to escape special characters , but he affecting the value No is having no effect, that may be a bug.

  As a solution, rather than include the image in the application supplement, use your conditional logic to add another class for the event, with a dynamic action that adds the image to the events so that class.

  Source of the region

  select
      year
    , file_nbr
    ,    nvl2(confirm_datetime, 'apex-cal-lime ', 'apex-cal-yellow ')
      || case commish_attend
          when 'YES' then null
          else 'alpha'
        end css_class
    , active
  from
      events_v
  

  Dynamic action

  Event: After refresh

  Selection type: Region

  Region:

  Action: Run the JavaScript Code

  Fire on Page load: Yes

  Code:

  $('.alpha span.fc-title')
    .before(' ');