EIGRP named Unicast

Similar Questions

• EIGRP UPDATE

  Hi people,

  I have problems understanding the process of EIGRP update.  A word containing document to a Wireshark capture screenshots, is attached.  Please, take a look at them and offer your thought.  Thank you.

  Hello.

  Draft RFC Cisco recently released for EIGRP, where you can find all the answers - https://www.ietf.org/id/draft-savage-eigrp-04.txt

  Basically:

  • section 5.3.3 - 4 says about INIT-flag to start the process of initial update (NULL INIT-package);
  • next hop is 0.0.0.0 - means we use Neighbor IP address as the next hop (that we can announce another figuring the next hop IP address);
  • update of unicast retransmission may come, 192.168.1.2 did not recognize multicast update (in this case, we spend in unicast mode).

  Ps1: I would say that you are testing EIGRP on 15.2 + free, as the project is most likely covers the latest version.

  PS2: If you repeat the test with 15.2 + version, please attach file OCAP and your questions.

• EIGRP plain IPsec tunnel?

  Hi all

  I was always under the impression that plain IPsec pass through the tunnel unicast IP traffic.

  When I need pass non-unicast or non - IP traffic, I created an IPsec with GRE or VTI.

  But I am currently on the customer site where all EIGRP routes are exchanged between sites that communicate through a single tunnel ordinary IPsec.

  I have added/changed/deleted routes on both sides, and the changes are reflected on the routing of the other table.

  The neighbors are not statically configured on the router, configuring EIGRP is simply 'no Auto-resume', then 'network 172.16.0.0'

  My question is...

  How is it all EIGRP traffic is going through the tunnel without any problem?

  Both are 2811 s 12.4 (18) running

  Thanks for any help!

  Federico.

  Federico

  Indeed, I believe that this is the case. It is quite clear according to the additional information that you have posted that these two routers are connected directly (in this case connected via FastEthernet) and connection interfaces running EIGRP, so that the EIGRP Hellos are sent the FastEthernet interfaces. The access list has failed for EIGRP, so there is no effort to encrypt the Hellos and they are sent in the clear. If routers become neighbors and EIGRP updates are sent through the FastEthernet interfaces. Data destinations that are learned traffic is sent on the FastEthernet interfaces, and when data traffic matches access list it is encrypted by IPSec.

  HTH

  Rick

• Now that my full FCP project, I burned a dvd and everything is fine but I want to download the .mov on YouTube, but cannot determine WHICH of the largest number is the one to download.  Too many files are named "Untitled" and I can't find a post of .mov

  Now that my project from FCP 5 minutes video clip is over, even if I am a complete and total novice to the iMac, I nevertheless managed burned a DVD via the file > share the menu option and everything went well, but now I want to download the .mov on YouTube, but is unable to determine to WHICH many files created in this project is the one to download!  It seems that many files are named "Untitled" and I do not seem to know how to find ONE with a .mov extension.

  At the top left of my screen of the FCP is the list of "Libraries" that after that I developed all the arrows to point down looks like this:

  Libraries

  Untitled

  Smart collections

  30/06/16

  Age of television

  If you haven't guessed, the name of my project is "T.V. Age" and I expected to find somewhere on the computer, a file named, 'T.V. Age.mov' or somethjng like that for me to download on YouTube, but I can't find THE .mov files.  Maybe I don't know how to market the Finder option to display filenames WITH extensions?

  I'm hoping that someone with enough time on their hands and understanding in their hearts will take the time to help me locate the .mov that as well as help me correctly name this library Untitled in the zone without good libraries course disrupt the integrity of the completed video-music that is always open on the timeline, even if I don't there anymore since my work with her is over , but the only "CLOSE button" I see is 'close library Untitled' button on the file menu.  I don't see even its end (the *) project button!  The only way I see how close my project is to close the program, but I doubt if it's true.  Any help will be greatly appreciated.

  Tony

  If you did burn a DVD, then you did burn a DVD, you export any file can be used.  Share > main folder > Audio + video and download that ProRes file resulting.  Or use the built-in YouTube option to upload directly to YouTube.

  You don't "close" anything in the part of the timeline, it is useless.  You would simply open a new project or other media type of container, in the part of the timeline.

• Mac Mail showing a plugin in/Users/USER/location when there is no user named USER account

  Thanks in advance for your comments. I'm hopelessly confused and I was afraid that my infected machine.

  I tried running Mac Mail a couple of times and it stopped on me. Then the third time it closes that I received an error message that a plugin has caused the problem. The path of the Plugin is listed as /Users/USER/Library/Mail/*/HockeySDK.framework/Versions/A/HockeySDK and the Plugin identifier is net.hockeyapp.sdk.mac.

  I searched using terminal, finder and the console for a user named 'USER' on my mac account. I see users root are my user name.

  I understand that it is possible to hide a user account, but have you tried the commands that should display all hidden user accounts and they have not revealed a user named USER account. To be clear, I have tried all the standard ways in the terminal to find a user account and cannot.

  Is someone can you please tell me if my Mac is infected with some hidden user account? Here are some of the comments of the 'details and System Configuration problem' as the form of question will allow me to answer:

  Process: Mail [2868] path: /Applications/Mail.app/Contents/MacOS/Mail ID: com.apple.mail Version: 9.3 (3124) build Info: Mail-3124000000000000 ~ 2 Type of Code: X 86-64 (Native) Parent process:? [1] background: mail [2868] User ID: 501

  Path of the PlugIn: /Users/USER/Library/Mail/*/HockeySDK.framework/Versions/A/HockeySDK PlugIn identifier: net.hockeyapp.sdk.mac PlugIn Version: 3.2.0 (31)

  Date/time: 2016-08-03 18:58:26.538-0400 OS Version: Mac OS X 10.11.6 (15 G 31) report Version: 11 anonymous UUID: 35332606-E9A7-BB5D-0E7D-811AAD4B38E8

  Found the same thing via a report of incidents for mail:

  Path of the PlugIn: /Users/USER/Library/Mail/*/HockeySDK.framework/Versions/A/HockeySDK

  The identifier for the PlugIn: net.hockeyapp.sdk.mac

  PlugIn version: 3.2.0 (31)

  It seems to be a related e-mail folder.

  In my case, I get this report due to a persistent fall whenever I click on the "Get new mail" icon in the mail.

  I wonder if someone answers this question could enlighten us as well.

  Thank you.

• What are the named files. DS_Store added by OSX for

  When you work on my iMac, OS10.6.8, the system adds a techy stuff file in folders with my files named. DS_Store.  What are and can I put them in the trash without losing something useful.

  They store the metadata about the items in the folder, for example to provide comments. Click here for more information.

  (143721)

• Snapshot, Naming Convention

  Is it possible to change the snapshots naming convention?

  Work on a shared storage system uses NTFS on the back end so "/" is a character not consistent therefore generate snapshots fail.

  Not as far as I know. You should certainly file a feature request for this because by default immediately uses the date/time stamp, which really should not use the /.

• My PC is running processes that are labeled as firefox, but I uninstalled and will find no more files named firefox, but pc cleaners say it is running

  I tried to clean my laptop and keep noticing the process named firefox and tracks slowed down... that surprises me, because I don't have firefox on this laptop, I maybe once, but no more, I checked the list of uninstaller in the Control Panel, is not here, I searched on the c: drive of files named mozilla or firefox and deleted I can't find more and yet it is always in my process list and also seems to be a memory hog. I use toolwiz as my PC cleaner, he sees things in firefox and tons of data from when do privacy cleaning, yet it gives me the message "cant fix firefox works"... whenever I came across a file, I think that can be connected, it is to me that firefox is running shit and it won't let me delete some things that I think can be the question...

  On the process tab of the task to the top manager in the menu bar, click View > select columns and add "Image path name. This will show where the firefox.exe process is launched on the hard drive, and I hope that will point to a specific program. If the location is suspicious (for example, the Temp folder) I would suspect malware. Note: you may need to use the button at the bottom of the tab "show processes from all users".

  Our technical support article lists cleaning tools other users have found useful: Troubleshooting Firefox problems caused by malware. The tools are free and take a long time to run a full scan. If they seem to finish quickly and demand payment to clean, you can have a serious infection. To continue the investigation, try the specialty forums listed in the article.

• a window named OpenSoftwareUpdater keeps appearing. What is your product, is it safe to load?

  When, on a Web site, a window named OpenSoftwareUpdater keeps appearing. She claims to strengthen and update software, but also States that it is NOT a product where related to Mozilla Firefox. I keep close the popup, but it reappears in a few moments. Is it safe to load or is - this virus/malware or other program?

  OpenSoftwareUpdater has nothing to do with Mozilla. Think of it as malware.

• Hi, I have just reset my Firefox and he lost ALL the TABS at the top. Bookmarks, history, leadership, Edit and Options tabs are GONE. I don't know that I named by a r

  Hi, I have just reset my Firefox and he lost ALL the TABS at the top. Bookmarks, history, leadership, Edit and Options tabs are GONE. I don't know that I named all right, but they ARE GONE. Please tell me how to get back them. Thanks, Chris

  _{Edit: removed your email address from the public view, since the only thing that will attract are spambots. you will be notified by email whenever someone replies to the thread, because of a bug in the forum unfortunately with a slight delay. (philipp)}

  The toolbars are still on display in your browser?

  If you still have the address bar, right click on any part that is not a text box or the icon, or if you do not like that of any space right click on the three horizontal lines on the right side of the address bar window. This should show some options, click on 'Menu Bar' and the tabs you are missing should appear.

  As a side note, usually if these options are missing, your icon of firefox in the upper left corner of the window should look different (being a rectangular button itself as opposed to an icon), and the 'file', 'Edition', 'Bookmarks', etc., are found after clicking on this button.

  Hope that helps.

• anchor named links do not work in iframes

  In developing my site web I came across the problem that Firefox does not scroll to the targets of links of anchor named in a page, when the page is in an iframe.

  In seeking solutions, I read a lot of dated 2010-2011, it is one thing to security... and many supposed solutions, which only work for certain situations, not mine. There was also a lot of people who cry 'FAULT!' because of this, as there is no risk that not involved so that never, and I agree very strongly.

  It is now 2014 and it still does not work, I still see nothing wrong with the practice of link in a document, not mater how or where they are displayed. It's actually a procedure standard and highly recommended for proper navigation and W3.

  I love the Community open source and I thank all participants for their contribution to Firefox, but your developers need to find a way to fight against the attempt to exploit the vulnerability, rather than destroy the vulnerable code itself, at the expense of the savvy folks less code like me who want just to get simple web content. When I read the answers to your developers, I've seen many not humble cop out answers I expect only from the likes of Microsoft, which I hope you do not try to imitate. That is to say, is not the problem.

  Try announcement Web development / standards evangelism MozillaZine forum. The helpers there are better informed on the problems of development of web page with Firefox.
  
  http://forums.mozillazine.org/viewforum.php?f=25
  
  You will need to register and log in to post in this forum.

• What am I supposed to do with a folder named 'Old data Firefox' and I don't remember really what I did to be saved?

  I'm not sure what I did to cause Firefox do I ASSUMED a BACKUP. Since I now have a folder named 'Old data Firefox' what do I do with it? Should I restore somehow everything that is located in this folder in my Firefox browser? Or do I need at all? What I'm missing here? No explanation, no guideance, no guidance as to what to do or how to Firefox or Mozilla. I can't even say for sure IF it I MISS SOMETHING IN MY FIREFOX BROWSER WORK NOW that has BEEN REGISTERED IN THIS BACKUP orrrrrrrrrrr do not? [email protected] Lescot

  If you have an 'Old Firefox Data' folder on your desktop, then you must have used the function "Reset Firefox", or help-> troubleshooting information page, as shown in the screenshot in this article, or in Firefox Safe Mode window, illustrated here.

  See Firefox Refresh - reset modules and parameters for more information on this feature.

  You don't need the "Old Firefox Data" folder, but you can move it to another location on your computer as a backup, if you wish. It is unlikely that you have set this folder as your current residence of profile. To find out which folder Firefox is currently using for the data in your profile, visit using Firefox-> troubleshooting information and click the Show folder. This will open the profile folder of Firefox under Windows. On Windows 7, the default Firefox profile folder would be located here (where "username" is your Windows logon user name and xxxxxxxx is a random string))

  C:\Users\"username"\AppData\Roaming\Mozilla\Firefox\Profiles\xxxxxxx.default
  

• Is possible Firefox redirection for win32 to named pipe?

  example \\.\pipe\xxxx as http://localhost: port

  I am also having the same problem... How to read from a named pipe?
  Anyone found any solution for this?

• Why is my phone named iphone diagnosis? Is this really a new phone?

  Why is my phone named iphone diagnosis? Is this really a new phone?

  With the lack of information in your message, you're question is impossible to answer. Where did you got this phone? You set up with a return to the top of an old phone? Someone is playing with her?

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System