Ejecting disc still giving trouble.

Similar Questions

• If I buy a used PC that does not have an operating system or OS disc, still has the label of license for windows can download Microsoft windows?

  If I buy a used PC that does not have an operating system or OS disc, still has the label of license for windows can download Microsoft windows?

  N ° you must contact the manufacturer of the computer and asking for a disc of recovery/reinstallation of Windows. Carey Frisch

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• Not properly ejected disc, a bad cautioned.

  Hello

  Since the installation of El Capitan, (10.11.4) I get sometimes, "disc ejected properly."   Trouble is, I do not eject the disc at all!  This has happened on a couple of different flash players.  I've never had this happen in Mac OS 1.1 > 10.10.5

  Someone knows what could happen? Ejected

  10.11.4 on Mac Pro Tower

  Trouble is, I do not eject the disc at all!  This has happened on a couple of different flash players.

  It is often the error message that appears when there are problems with the USB cable, or in particular, USB hubs.

  To test, if you can, connect these annoying devices via a direct connection to your computer and/or using different USB cables.

• Is the content of a bootable disc still necessary after the installation of windows with boot camp?

  I wonder how is I think it's called windows Mac service is used subsequently install a windows OS?

  I mean, can I still had to keep this bootable drive plugged on, or the content of it?

  1. you can remove the bootable disc, once Windows is installed.

  2. you can keep a copy of the installer from USB, for the installation of the future repair or recovery.

• DVD player will not play just ejects disc

  When it wants to either marine a dvd or just simply install a program (sims2) on a DVD and the disc is ejected just windows tells me to insert a DVD.

  with movies I get around by forcing it to be opened by other programs, but to install the SIMS2, I'm just stuck. What should do?

  Hello resonz,

  Try to uninstall your optical drive through the Device Manager, and then restart your computer. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Rayman 2: I have the original game of Rayman 2, but when I get to one of the levels, the game displays an icon huge game and written in English that he could not find the game disc but the disc still in there!

  Hello

  I used the same disk to complete the game on my old computer with windows xp.

  I tried to talk to ubi soft, but they said that it is because I have windows 7, but I know that's not because:

  A.I try the compibilty thing, but it still happens.

  B. If I go to a level that I have spent on my computer windows 7 without problem, it also has the problem!

  I even tried to use the codes to see if it's like that on other levels, but it's the same way for the rest of the game!
  What should do?

  Here is a picture of what you see:

  

  and here's some info about my computer:
  Windows 7 Professional 32-bit
  Intel core i3 540 3.07 GHz
  memory: 4096MB
  Vresion of DirectX: Directx 11
  Video card: nvidia geforce gt 240
  aprox. total memory: 2392 MB
  (Monitor: LG W2286L (digital)

  Help, please

  Ofir

  Hello

  ·        What codec are you talking about?

  Rayman 2 is not compatible with Windows 7. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Rayman%202&OS=32-bit

   

  Step 1:

  As you said in your post that you have installed and have completed level 1, it seems that the installation is corrupt. Install the game on another system (Windows 7) and check if the problem persists or try with another CD and check if you are able to install the game.

  I suggest for Rayman 2 to uninstall and then reinstall and check. Follow step 2.

  Step 2: Uninstall the game.

  To uninstall the programs in the system, follow the steps mentioned below.

  a. click on Start menu and type programs and features in the start search box and press ENTER.

  b. Locate the program and right-click to uninstall the system.

  For more details, see the article mentioned below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 3:

  Before installing the computer clean boot and then continue the installation. To put the computer in a clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• disk drive will not eject disc

  I have a Toshiba laptop and somehow I messed up the network feature so I tried to reinstall Windows 7 from the disc, I received. I put in the disk drive and unfortunately was not pushing it down on the spindle well enough.  When I opened the drive, the drive is not found.  How can I get the disc?  It does not vibrate or anything like that.  I can't see inside the car even with a flashlight.  Where is he?

  If it is under warranty let Toshiba.  Can push the tray and turn upside down maybe lappy she would fall into the lace.

• I have pod problem of ejecting disc

  This is a new generation nano 7. I'm running Vista Home Edition. I continue to get the error messages after I have sync files. Once the synchronization is complete, I try to eject the nano and I get an error message. cannott eject because the device is sharing files with other applications. Is not a happy Christmas gift. Help, please

  Hi,

  Welcome to the Microsoft Community and thanks for posting the question.

  The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.

  The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.

  So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.

  I suggest you check in Manager tasks, if there are any processes running related to iPod.

  What is the Task Manager? http://Windows.Microsoft.com/en-in/Windows-Vista/what-is-Task-Manager

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Widows vista SP1 installed watch, but still giving it to me as an unpdate, what should I do?

  I installed windows vista service pack 1 as an update, and when I check the history update watch installed and successful, but when I go to update the system still gives it to me as if it was not installed. I installed again and it shows successful, but then give it to me as a new unpgrade. For me, it seems that is not installed. What can I do? I need to renew to get Service Pack 2 to be able to install Internet explorer 9. Thank you!

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you if SP1 is installed or not.

  If this isn't the case, then choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• I Can not eject discs from my PC. I Hold Down the Button, the light begins to blink, but it does not "Pop" (?)

  8 eject disk windows

  Hello

  Don't hold... just gently push...

  If this does not work, look for a small pin hole or the front or rear of the car for something like a paper clip to fit...

  Some readers have a manual EJECT and RESET in the hole...

• Tecra S1: MS Access giving trouble!

  Hello there,

  Just started using my new S1, everything works fine accept MS Access. When I open a table there's no display text, there's al white until I scroll with my mouse, so all of the displayed text. But everything is flickering (text driven, toolbar, etc.), also, the CPU usage is running at 100%. After I close the table everything is normal, I can open forms, reports etc. But when I open a form, including a subform that no text will be displayed, the same thing when I try to open a query.
  I tried the following:
  XP + Office2003
  XP + SP2 + Office2003Pro
  XP + Office2000Pro
  XP + SP2 + Office2000Pro
  XP + Office2002Pro + OSP3
  XP SP2 + Office2002Pro + OSP3
  The problem remained. Even when I start a new database, making a new table, the problem occurs.

  What should do?

  Hello

  What is the origin of this softwareplatform? It is a facility of Toshiba or one you made yourself?
  If you have built your own XP-platform, please take a look at the CD tools & Utils. Put in the machine, choose a readable language and look at the list of drivers and utilities. Please make sure that you have installed them all and in the exact order listed there.

  I hope this helps!

  Tom BR

• I still have trouble losing my ip address, it fails to connect. I'm sick of it. Help, please

  My server has check all the problems on this end. My computer freeze and say does not. tone I checkit told me it cannot locate my ip address. Then tried to pay for something that I can't use it properly. Please can you help me somehow?

  Hi SueWolde,

  1. what happens when you try to connect to the network?

  2. you receive an error message/code?

  3. you are on a computer in the domain?

  You may encounter network or problems of Internet in Windows for several reasons. Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled
  • WEP, WPA, or WPA2 key or password security issues
  • Cables that are not connected correctly
  • Corrupt or incompatible drivers
  • Missing updates
  • Network connection settings
  • Hardware or software problems

  Try these steps and see if it helps.

  Step 1

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.

  See the help article to reset the Internet (TCP/IP) Protocol.

  http://support.Microsoft.com/kb/299357

   

             

  Step 2

  Refer to the help article and check if that helps:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

   

• I still having trouble installing Silverlight on my system. (XP HOME - IE8) I was doing the race of Microsoft for 2 months.

  Error says I already installed on my computer of Silverlight. I have not installed. I spoke to Microsoft several times and each time they claim they would get back to me after a few checks. They never come back for me. Once they called me at 5:00 central time. Thank you for your help and ideas.

  Hi DougMacPherson1959,

  ·         What happens when you try to install Silverlight?

  ·         You get the error message?

  Follow these methods.

  Method 1: Install the application as an administrator.

  http://support.Microsoft.com/kb/305780

  Method 2: Follow the steps in the article.

  http://support.Microsoft.com/kb/2438651

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  For reference: http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx

  If the problem persists, you can post your request in the Silverlight forums.

  http://forums.Silverlight.NET/

• Is there a firewall means a single VM away from the Internet while still giving access to the LAN?

  I'm trying to find a way, if possible, to partition a simple VM away from the WAN (Internet) while allowing access to a subnet of the class-C using VMWare Workstation and outside the computer virtual guest himself?

  Install a 2nd NETWORK card is not my preferred option.  Home & comments are windows.

  I am currently configuring the MS Loopback map with the host firewall rules, but can't seem to figure out the trick to get this installation work.

  If anyone has any suggestions?

  Thanks in advance...

  If you have administrator access to the router that provides your connection to the Internet, you could give a fixed IP address to the virtual machine and set a rule of access on the router to only allow access to IP addresses on the local subnet.